Merge branch 'master' of https://github.com/86Box/86Box

src/86box.c

@@ -761,7 +761,7 @@ void
 pc_full_speed(void)
 {
     if (!atfullspeed) {
-        pc_log("Set fullspeed - %i %i\n", is386, AT);
+        pc_log("Set fullspeed - %i %i\n", is386, is486);
         pc_speed_changed();
     }
     atfullspeed = 1;

src/disk/hdc.c

@@ -115,6 +115,7 @@ static const struct {
     { &st506_xt_wd1002a_27x_device },
     { &st506_xt_wd1004_27x_device  },
     { &st506_xt_wd1004a_27x_device },
+    { &st506_xt_victor_v86p_device },
     { &esdi_at_wd1007vse1_device   },
     { &ide_isa_device              },
     { &ide_isa_2ch_device          },

src/disk/hdc_st506_xt.c

@@ -99,6 +99,7 @@
 #define WD1002A_27X_BIOS_FILE "roms/hdd/st506/wd1002a_27x-62-000094-032.bin"
 #define WD1004_27X_BIOS_FILE  "roms/hdd/st506/western_digital_WD1004A-27X.bin"
 #define WD1004A_27X_BIOS_FILE "roms/hdd/st506/western_digital_WD1004A-27X.bin"
+#define VICTOR_V86P_BIOS_FILE "roms/machines/v86p/2793VG.10010688.rom"
 
 #define ST506_TIME            (250 * TIMER_USEC)
 #define ST506_TIME_MS         (1000 * TIMER_USEC)
@@ -182,6 +183,7 @@
 #define CMD_WRITE_BUFFER       0x0f
 #define CMD_ALT_TRACK          0x11
 #define CMD_INQUIRY_ST11       0x12 /* ST-11 BIOS */
+#define CMD_V86P_POWEROFF      0x1a /* Victor V86P */
 #define CMD_RAM_DIAGNOSTIC     0xe0
 /* reserved			0xe1 */
 /* reserved			0xe2 */
@@ -819,6 +821,29 @@ st506_callback(void *priv)
                     /* For a 615/4/26 we get 666/2/31 geometry. */
                     st506_xt_log("ST506: drive%i: cyls=%i, heads=%i\n",
                                  dev->drive_sel, drive->cfg_cyl, drive->cfg_hpc);
+                    if (dev->type == 23 && drive->cfg_hpc == 2) {
+                        /*
+                         * On Victor V86P, there's a disagreement between
+                         * the physical geometry, what the controller
+                         * pretends it to be, and what the BIOS uses.
+                         *
+                         * The disk physically has 2/34 heads/sectors per
+                         * track, but it is treated as 4/17 in order to
+                         * look like a regular type 3 drive (see [1],
+                         * line 1859). The controller accepts the 4/17
+                         * geometry, so this should not really matter.
+                         *
+                         * However, the BIOS issues SPECIFY (see [1],
+                         * line 2089) with head count of two. Let's
+                         * hardwire the correct number instead, just like
+                         * the real hardware seems to.
+                         *
+                         * [1] https://archive.org/download/v86p-hd/V86P-HD.TXT
+                         */
+                        drive->cfg_hpc = 4;
+                        st506_xt_log("ST506: drive%i: corrected to heads=%i\n",
+                                     dev->drive_sel, drive->cfg_hpc);
+                    }
                     st506_complete(dev);
                     break;
             }
@@ -949,6 +974,34 @@ st506_callback(void *priv)
             }
             break;
 
+        case CMD_V86P_POWEROFF:
+            if (dev->type == 23) {
+                /*
+                 * Main BIOS (not the option ROM on disk) issues this.
+                 * Not much we can do, since we don't have a physical disk
+                 * to spin down, but handle this anyways so that we log
+                 * something more reasonable than "unknown command".
+                 *
+                 * Entirely undocumented, but this is what's been observed:
+                 * BIOS setting | Command sent
+                 * 1 minutes    | 1a 00 00 0c 02 00
+                 * 2 minutes    | 1a 00 00 18 02 00
+                 * 3 minutes    | 1a 00 00 24 02 00
+                 * 4 minutes    | 1a 00 00 30 02 00
+                 * 5 minutes    | 1a 00 00 3c 02 00
+                 * off          | 1a 00 00 00 02 00
+                 */
+                if (dev->command[3])
+                    st506_xt_log("ST506: Auto power-off in %d seconds (type=%i)\n",
+                                 dev->command[3] * 5, dev->type);
+                else
+                    st506_xt_log("ST506: Auto power-off disabled (type=%i)\n", dev->type);
+            } else {
+                st506_error(dev, ERR_BAD_COMMAND);
+            }
+            st506_complete(dev);
+            break;
+
         case CMD_RAM_DIAGNOSTIC:
 #ifdef ENABLE_ST506_XT_LOG
             st506_xt_log("ST506: RAM_DIAG\n");
@@ -1485,6 +1538,9 @@ st506_init(const device_t *info)
                 dev->switches |= 0x40;
             dev->bios_addr = device_get_config_hex20("bios_addr");
             break;
+        case 23: /* Victor V86P (RLL) */
+            fn = VICTOR_V86P_BIOS_FILE;
+            break;
     }
 
     /* Load the ROM BIOS. */
@@ -1605,6 +1661,12 @@ wd1004a_27x_available(void)
     return (rom_present(WD1004A_27X_BIOS_FILE));
 }
 
+static int
+victor_v86p_available(void)
+{
+    return (rom_present(VICTOR_V86P_BIOS_FILE));
+}
+
 // clang-format off
 static const device_config_t dtc_config[] = {
     {
@@ -2036,3 +2098,17 @@ const device_t st506_xt_wd1004a_27x_device = {
     .force_redraw  = NULL,
     .config        = wd_rll_config
 };
+
+const device_t st506_xt_victor_v86p_device = {
+    .name          = "Victor V86P RLL Fixed Disk Adapter",
+    .internal_name = "st506_xt_victor_v86p",
+    .flags         = DEVICE_ISA,
+    .local         = (HDD_BUS_MFM << 8) | 23,
+    .init          = st506_init,
+    .close         = st506_close,
+    .reset         = NULL,
+    { .available = victor_v86p_available },
+    .speed_changed = NULL,
+    .force_redraw  = NULL,
+    .config        = NULL
+};

src/include/86box/hdc.h

@@ -40,6 +40,7 @@ extern const device_t st506_at_wd1003_device;      /* st506_at_wd1003 */
 extern const device_t st506_xt_wd1004a_wx1_device; /* st506_xt_wd1004a_wx1 */
 extern const device_t st506_xt_wd1004_27x_device;  /* st506_xt_wd1004_27x */
 extern const device_t st506_xt_wd1004a_27x_device; /* st506_xt_wd1004a_27x */
+extern const device_t st506_xt_victor_v86p_device; /* st506_xt_victor_v86p */
 
 extern const device_t esdi_at_wd1007vse1_device; /* esdi_at */
 extern const device_t esdi_ps2_device;           /* esdi_mca */

src/include/86box/machine.h

@@ -709,6 +709,9 @@ extern int machine_at_vpc2007_init(const machine_t *);
 /* m_at_t3100e.c */
 extern int machine_at_t3100e_init(const machine_t *);
 
+/* m_elt.c */
+extern int machine_elt_init(const machine_t *);
+
 /* m_europc.c */
 extern int machine_europc_init(const machine_t *);
 #ifdef EMU_DEVICE_H

src/include/86box/nvr.h

@@ -97,6 +97,7 @@ extern const device_t ami_1994_nvr_device;
 extern const device_t ami_1995_nvr_device;
 extern const device_t via_nvr_device;
 extern const device_t p6rp4_nvr_device;
+extern const device_t elt_nvr_device;
 #endif
 
 extern void rtc_tick(void);

src/machine/CMakeLists.txt

@@ -16,7 +16,7 @@
 add_library(mch OBJECT machine.c machine_table.c m_xt.c m_xt_compaq.c
     m_xt_philips.c
     m_xt_t1000.c m_xt_t1000_vid.c m_xt_xi8088.c m_xt_zenith.c m_pcjr.c
-    m_amstrad.c m_europc.c m_xt_olivetti.c m_tandy.c m_v86p.c
+    m_amstrad.c m_europc.c m_elt.c m_xt_olivetti.c m_tandy.c m_v86p.c
     m_at.c m_at_commodore.c
     m_at_t3100e.c m_at_t3100e_vid.c m_ps1.c m_ps1_hdc.c m_ps2_isa.c
     m_ps2_mca.c m_at_compaq.c m_at_286_386sx.c m_at_386dx_486.c

src/machine/m_elt.c

@@ -0,0 +1,199 @@
+/*
+ * 86Box	A hypervisor and IBM PC system emulator that specializes in
+ *		running old operating systems and software designed for IBM
+ *		PC systems and compatibles from 1981 through fairly recent
+ *		system designs based on the PCI bus.
+ *
+ *		This file is part of the 86Box distribution.
+ *
+ *		Epson Equity LT portable computer emulation.
+ *
+ * Author:	Lubomir Rintel, <lkundrak@v3.sk>
+ *
+ *		Copyright 2022 Lubomir Rintel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free  Software  Foundation; either  version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is  distributed in the hope that it will be useful, but
+ * WITHOUT   ANY  WARRANTY;  without  even   the  implied  warranty  of
+ * MERCHANTABILITY  or FITNESS	FOR A PARTICULAR  PURPOSE. See	the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ *
+ *   Free Software Foundation, Inc.
+ *   59 Temple Place - Suite 330
+ *   Boston, MA 02111-1307
+ *   USA.
+ */
+
+// clang-format off
+#include <stdint.h>
+#include <stdio.h>
+#include <time.h>
+#include <86box/timer.h>
+#include <86box/fdd.h>
+#include <86box/86box.h>
+#include <86box/device.h>
+#include <86box/fdc.h>
+#include <86box/fdc_ext.h>
+#include <86box/io.h>
+#include <86box/keyboard.h>
+#include <86box/machine.h>
+#include <86box/mem.h>
+#include <86box/nmi.h>
+#include <86box/nvr.h>
+#include <86box/pit.h>
+#include <86box/rom.h>
+#include <86box/video.h>
+#include <86box/vid_cga.h>
+// clang-format on
+
+static void
+elt_vid_off_poll(void *p)
+{
+    cga_t  *cga   = p;
+    uint8_t hdisp = cga->crtc[1];
+
+    /* Don't display anything.
+     * TODO: Do something less stupid to emulate backlight off. */
+    cga->crtc[1] = 0;
+    cga_poll(cga);
+    cga->crtc[1] = hdisp;
+}
+
+static void
+sysstat_out(uint16_t port, uint8_t val, void *p)
+{
+    cga_t *cga = p;
+
+    switch (val) {
+        case 0:
+            break;
+        case 1:
+            /* Backlight off. */
+            if (cga)
+                timer_set_callback(&cga->timer, elt_vid_off_poll);
+            break;
+        case 2:
+            /* Backlight on. */
+            if (cga)
+                timer_set_callback(&cga->timer, cga_poll);
+            break;
+        default:
+            pclog("Unknown sysstat command: 0x%02x\n", val);
+    }
+}
+
+static uint8_t
+sysstat_in(uint16_t port, void *p)
+{
+    cga_t  *cga = p;
+    uint8_t ret = 0x0a; /* No idea what these bits are */
+
+    /* External CRT. We don't emulate the LCD/CRT switching, let's just
+     * frivolously use this bit to indicate we're using the LCD if the
+     * user didn't override the video card for now. */
+    if (cga == NULL)
+        ret |= 0x40;
+
+    return ret;
+}
+
+static void
+elt_vid_out(uint16_t addr, uint8_t val, void *p)
+{
+    cga_t *cga = p;
+
+    /* The Equity LT chipset's CRTC contains more registers than the
+     * regular CGA. The BIOS writes one of them, register 36 (0x24).
+     * Nothing is known about the number or function of those registers,
+     * let's just ignore them so that we don't clobber the CGA register.
+     * Also, the BIOS writes that register via the 3D0h/3D1h alias
+     * instead of the usual 3D4h/3D5h, possibly to keep the wraparound
+     * behavior on the usual addresses (just an assumption, not
+     * verified). */
+    switch (addr) {
+        case 0x3d0:
+            cga->crtcreg = val;
+            return;
+        case 0x3d1:
+            if (cga->crtcreg >= 32)
+                return;
+            /* FALLTHROUGH */
+        default:
+            cga->crtcreg &= 31;
+            cga_out(addr, val, p);
+    }
+}
+
+static uint8_t
+elt_vid_in(uint16_t addr, void *p)
+{
+    cga_t *cga = p;
+
+    /* Just make sure we don't ever let regular CGA code run with crtcreg
+     * pointing out of crtcregs[] bounds. */
+    cga->crtcreg &= 31;
+    return cga_in(addr, p);
+}
+
+static void
+load_font_rom(uint32_t font_data)
+{
+    int c, d;
+    for (c = 0; c < 256; c++)
+        for (d = 0; d < 8; d++)
+            fontdat[c][d] = mem_readb_phys(font_data++);
+}
+
+int
+machine_elt_init(const machine_t *model)
+{
+    cga_t *cga = NULL;
+    int    ret;
+
+    ret = bios_load_interleavedr("roms/machines/elt/HLO-B2.rom",
+                                 "roms/machines/elt/HLO-A2.rom",
+                                 0x000fc000, 65536, 0);
+
+    if (bios_only || !ret)
+        return ret;
+
+    /* The machine doesn't have any separate font ROM chip. The text mode
+     * font is likely a mask ROM in the chipset. video_reset() will try
+     * to load a MDA font, but let's have a reasonable fall back if it's
+     * not available. Read in the graphical mode font from the BIOS ROM
+     * image. */
+    load_font_rom(0xffa6e);
+
+    machine_common_init(model);
+
+    nmi_init();
+
+    pit_devs[0].set_out_func(pit_devs[0].data, 1, pit_refresh_timer_xt);
+
+    if (fdc_type == FDC_INTERNAL)
+        device_add(&fdc_xt_device);
+
+    if (gfxcard == VID_INTERNAL) {
+        cga = device_add(&cga_device);
+        io_removehandler(0x03d0, 0x0010, cga_in, NULL, NULL, cga_out, NULL, NULL, cga);
+        io_sethandler(0x03d0, 0x0010, elt_vid_in, NULL, NULL, elt_vid_out, NULL, NULL, cga);
+    }
+
+    /* Keyboard goes after the video, because on XT compatibles it's dealt
+     * with by the same PPI as the config switches and we need them to
+     * indicate the correct display type */
+    device_add(&keyboard_xt_device);
+
+    device_add(&elt_nvr_device);
+
+    io_sethandler(0x11b8, 1, sysstat_in, NULL, NULL, sysstat_out, NULL, NULL, cga);
+
+    return ret;
+}

src/machine/machine_table.c

@@ -2117,6 +2117,42 @@ const machine_t machines[] = {
         .snd_device = NULL,
         .net_device = NULL
     },
+    {
+        .name = "[8086] Epson Equity LT",
+        .internal_name = "elt",
+        .type = MACHINE_TYPE_8086,
+        .chipset = MACHINE_CHIPSET_PROPRIETARY,
+        .init = machine_elt_init,
+        .pad = 0,
+        .pad0 = 0,
+        .pad1 = MACHINE_AVAILABLE,
+        .pad2 = 0,
+        .cpu = {
+            .package = CPU_PKG_8086,
+            .block = CPU_BLOCK_NONE,
+            .min_bus = 0,
+            .max_bus = 0,
+            .min_voltage = 0,
+            .max_voltage = 0,
+            .min_multi = 0,
+            .max_multi = 0
+        },
+        .bus_flags = MACHINE_PC,
+        .flags = MACHINE_VIDEO,
+        .ram = {
+            .min = 640,
+            .max = 640,
+            .step = 640
+        },
+        .nvrmask = 0x3f,
+        .kbc = KBC_IBM_PC_XT,
+        .kbc_p1 = 0xff00,
+        .gpio = 0xffffffff,
+        .device = NULL,
+        .vid_device = NULL,
+        .snd_device = NULL,
+        .net_device = NULL
+    },
 
 #if defined(DEV_BRANCH) && defined(USE_LASERXT)
     {

src/nvr_at.c

@@ -280,6 +280,7 @@
 #define REGD_VRT           0x80
 #define RTC_CENTURY_AT     0x32 /* century register for AT etc */
 #define RTC_CENTURY_PS     0x37 /* century register for PS/1 PS/2 */
+#define RTC_CENTURY_ELT    0x1A /* century register for Epson Equity LT */
 #define RTC_ALDAY          0x7D /* VIA VT82C586B - alarm day */
 #define RTC_ALMONTH        0x7E /* VIA VT82C586B - alarm month */
 #define RTC_CENTURY_VIA    0x7F /* century register for VIA VT82C586B */
@@ -981,9 +982,9 @@ nvr_at_init(const device_t *info)
     memset(local->lock, 0x00, nvr->size);
     local->def   = 0xff /*0x00*/;
     local->flags = 0x00;
-    switch (info->local & 7) {
+    switch (info->local & 0x0f) {
         case 0: /* standard AT, no century register */
-            if (info->local == 16) {
+            if (info->local == 32) {
                 local->flags |= FLAG_P6RP4_HACK;
                 nvr->irq    = 8;
                 local->cent = RTC_CENTURY_AT;
@@ -996,13 +997,13 @@ nvr_at_init(const device_t *info)
         case 1: /* standard AT */
         case 5: /* AMI WinBIOS 1994 */
         case 6: /* AMI BIOS 1995 */
-            if (info->local == 9)
+            if ((info->local & 0x0f) == 1)
                 local->flags |= FLAG_PIIX4;
             else {
                 local->def = 0x00;
-                if ((info->local & 7) == 5)
+                if ((info->local & 0x0f) == 5)
                     local->flags |= FLAG_AMI_1994_HACK;
-                else if ((info->local & 7) == 6)
+                else if ((info->local & 0x0f) == 6)
                     local->flags |= FLAG_AMI_1995_HACK;
                 else
                     local->def = 0xff;
@@ -1015,7 +1016,7 @@ nvr_at_init(const device_t *info)
             nvr->irq    = 8;
             local->cent = RTC_CENTURY_PS;
             local->def  = 0x00;
-            if (info->local & 8)
+            if (info->local & 0x10)
                 local->flags |= FLAG_NO_NMI;
             break;
 
@@ -1023,15 +1024,15 @@ nvr_at_init(const device_t *info)
             nvr->irq    = 1;
             local->cent = RTC_CENTURY_AT;
             local->def  = 0xff;
-            if (info->local & 8)
+            if (info->local & 0x10)
                 local->flags |= FLAG_NO_NMI;
             break;
 
         case 4: /* IBM AT */
-            if (info->local == 12) {
+            if (info->local & 0x10) {
                 local->def = 0x00;
                 local->flags |= FLAG_AMI_1992_HACK;
-            } else if (info->local == 20)
+            } else if (info->local == 36)
                 local->def = 0x00;
             else
                 local->def = 0xff;
@@ -1043,6 +1044,10 @@ nvr_at_init(const device_t *info)
             nvr->irq    = 8;
             local->cent = RTC_CENTURY_VIA;
             break;
+        case 8: /* Epson Equity LT */
+            nvr->irq    = -1;
+            local->cent = RTC_CENTURY_ELT;
+            break;
     }
 
     local->read_addr = 1;
@@ -1067,9 +1072,14 @@ nvr_at_init(const device_t *info)
         timer_load_count(nvr);
 
         /* Set up the I/O handler for this device. */
+        if (info->local == 8) {
+            io_sethandler(0x11b4, 2,
+                          nvr_read, NULL, NULL, nvr_write, NULL, NULL, nvr);
+        } else {
             io_sethandler(0x0070, 2,
                           nvr_read, NULL, NULL, nvr_write, NULL, NULL, nvr);
-        if (info->local & 8) {
+        }
+        if (info->local & 0x10) {
             io_sethandler(0x0072, 2,
                           nvr_read, NULL, NULL, nvr_write, NULL, NULL, nvr);
         }
@@ -1180,7 +1190,7 @@ const device_t piix4_nvr_device = {
     .name          = "Intel PIIX4 PC/AT NVRAM",
     .internal_name = "piix4_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 9,
+    .local         = 0x10 | 1,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,
@@ -1220,7 +1230,7 @@ const device_t ami_1992_nvr_device = {
     .name          = "AMI Color 1992 PC/AT NVRAM",
     .internal_name = "ami_1992_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 12,
+    .local         = 0x10 | 4,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,
@@ -1234,7 +1244,7 @@ const device_t ami_1994_nvr_device = {
     .name          = "AMI WinBIOS 1994 PC/AT NVRAM",
     .internal_name = "ami_1994_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 13,
+    .local         = 0x10 | 5,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,
@@ -1248,7 +1258,7 @@ const device_t ami_1995_nvr_device = {
     .name          = "AMI WinBIOS 1995 PC/AT NVRAM",
     .internal_name = "ami_1995_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 14,
+    .local         = 0x10 | 6,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,
@@ -1262,7 +1272,7 @@ const device_t via_nvr_device = {
     .name          = "VIA PC/AT NVRAM",
     .internal_name = "via_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 15,
+    .local         = 0x10 | 7,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,
@@ -1276,7 +1286,7 @@ const device_t p6rp4_nvr_device = {
     .name          = "ASUS P/I-P6RP4 PC/AT NVRAM",
     .internal_name = "p6rp4_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 16,
+    .local         = 32,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,
@@ -1290,7 +1300,21 @@ const device_t amstrad_megapc_nvr_device = {
     .name          = "Amstrad MegapC NVRAM",
     .internal_name = "amstrad_megapc_nvr",
     .flags         = DEVICE_ISA | DEVICE_AT,
-    .local         = 20,
+    .local         = 36,
+    .init          = nvr_at_init,
+    .close         = nvr_at_close,
+    .reset         = nvr_at_reset,
+    { .available = NULL },
+    .speed_changed = nvr_at_speed_changed,
+    .force_redraw  = NULL,
+    .config        = NULL
+};
+
+const device_t elt_nvr_device = {
+    .name          = "Epson Equity LT NVRAM",
+    .internal_name = "elt_nvr",
+    .flags         = DEVICE_ISA,
+    .local         = 8,
     .init          = nvr_at_init,
     .close         = nvr_at_close,
     .reset         = nvr_at_reset,

src/video/vid_table.c

@@ -330,7 +330,7 @@ video_reset(int card)
 
     /* Do not initialize internal cards here. */
     if (!(card == VID_NONE) && !(card == VID_INTERNAL) && !machine_has_flags(machine, MACHINE_VIDEO_ONLY)) {
-        vid_table_log("VIDEO: initializing '%s'\n", video_cards[card].name);
+        vid_table_log("VIDEO: initializing '%s'\n", video_cards[card].device->name);
 
         video_prepare();
 

src/video/video.c

@@ -252,7 +252,7 @@ static uint32_t cga_2_table[16];
 static void (*blit_func)(int x, int y, int w, int h, int monitor_index);
 
 #ifdef ENABLE_VIDEO_LOG
-int sdl_do_log = ENABLE_VIDEO_LOG;
+int video_do_log = ENABLE_VIDEO_LOG;
 
 static void
 video_log(const char *fmt, ...)

src/win/Makefile.mingw

@@ -560,6 +560,7 @@ MCHOBJ		:= machine.o machine_table.o \
 		    m_xt_xi8088.o m_xt_zenith.o \
 		    m_pcjr.o \
 		    m_amstrad.o m_europc.o \
+		    m_elt.o \
 		    m_xt_olivetti.o m_tandy.o m_v86p.o \
 		    m_at.o m_at_commodore.o \
 		    m_at_t3100e.o m_at_t3100e_vid.o \