80486DX2-66/86Box-fork
1
0
Fork 0
Code Issues Pull Requests Activity

Integrate OBattler's AHA-1542CP fixes

Browse Source
This commit is contained in:
RichardG867
2021-03-22 21:24:48 -03:00
parent ac52052cfa
commit 4f0a888498
3 changed files with 186 additions and 52 deletions
Download Patch File Download Diff File Expand all files Collapse all files

215
src/scsi/scsi_aha154x.c
View File

@@ -71,44 +71,7 @@ uint16_t aha_ports[] = {
0x0130, 0x0134, 0x0000, 0x0000
};
static uint8_t aha1542cp_pnp_rom[] = {
0x04, 0x90, 0x15, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, /* ADP1542, dummy checksum (filled in by isapnp_add_card) */
0x0a, 0x10, 0x10, /* PnP version 1.0, vendor version 1.0 */
0x82, 0x12, 0x00, 'A', 'd', 'a', 'p', 't', 'e', 'c', ' ', 'A', 'H', 'A', '-', '1', '5', '4', '2', 'C', 'P', /* ANSI identifier */
0x15, 0x04, 0x90, 0x15, 0x42, 0x01, /* logical device ADP1542, can participate in boot */
0x82, 0x11, 0x00, 'S', 'C', 'S', 'I', ' ', 'H', 'o', 's', 't', ' ', 'A', 'd', 'a', 'p', 't', 'e', 'r', /* ANSI identifier */
0x1c, 0x41, 0xd0, 0x00, 0xa0, /* compatible device PNP00A0 */
0x22, 0x00, 0xde, /* IRQ 9/10/11/12/14/15 */
0x2a, 0xe1, 0x3a, /* DMA 0/5/6/7, type A, count by word, count by byte, not bus master, 16-bit only */
0x31, 0x00, /* start dependent functions, preferred */
0x47, 0x01, 0x30, 0x03, 0x30, 0x03, 0x04, 0x04, /* I/O 0x330, decodes 16-bit, 4-byte alignment, 4 addresses */
0x30, /* start dependent functions, acceptable */
0x47, 0x01, 0x34, 0x03, 0x34, 0x03, 0x04, 0x04, /* I/O 0x334, decodes 16-bit, 4-byte alignment, 4 addresses */
0x30, /* start dependent functions, acceptable */
0x47, 0x01, 0x34, 0x02, 0x34, 0x02, 0x04, 0x04, /* I/O 0x234, decodes 16-bit, 4-byte alignment, 4 addresses */
0x30, /* start dependent functions, acceptable */
0x47, 0x01, 0x30, 0x02, 0x30, 0x02, 0x04, 0x04, /* I/O 0x230, decodes 16-bit, 4-byte alignment, 4 addresses */
0x30, /* start dependent functions, acceptable */
0x47, 0x01, 0x34, 0x01, 0x34, 0x01, 0x04, 0x04, /* I/O 0x134, decodes 16-bit, 4-byte alignment, 4 addresses */
0x31, 0x02, /* start dependent functions, functional */
0x47, 0x01, 0x30, 0x01, 0x30, 0x01, 0x04, 0x04, /* I/O 0x130, decodes 16-bit, 4-byte alignment, 4 addresses */
0x38, /* end dependent functions */
0x81, 0x09, 0x00, 0x66, 0x80, 0x0c, 0xc0, 0x0d, 0x40, 0xff, 0x40, 0x00, /* memory 0xC8000-0xDC000, expansion ROM, shadowable, 8-bit, supports high address, read-cacheable write-through, non-writeable, alignment 0xff4000, 16384 bytes */
0x15, 0x04, 0x90, 0x15, 0x4f, 0x01, /* logical device ADP154F, can participate in boot */
0x82, 0x11, 0x00, 'F', 'l', 'o', 'p', 'p', 'y', ' ', 'C', 'o', 'n', 't', 'r', 'o', 'l', 'l', 'e', 'r', /* ANSI identifier */
0x1c, 0x41, 0xd0, 0x00, 0x07, /* compatible device PNP0007 */
0x31, 0x00, /* start dependent functions, preferred */
0x4b, 0xf0, 0x03, 0x06, /* fixed I/O 0x3F0, 6 addresses */
0x30, /* start dependent functions, acceptable */
0x4b, 0x70, 0x03, 0x06, /* fixed I/O 0x370, 6 addresses */
0x38, /* end dependent functions */
0x22, 0x40, 0x00, /* IRQ 6 */
0x2a, 0x04, 0x28, /* DMA 2, type A, no count by word, count by byte, not bus master, 8-bit only */
0x79, 0x00 /* end tag, dummy checksum (filled in by isapnp_add_card) */
};
static uint8_t *aha1542cp_pnp_rom = NULL;
#pragma pack(push,1)
@@ -349,6 +312,12 @@ aha_param_len(void *p)
case CMD_MBENABLE:
return 2;
case 0x39:
return 3;
case 0x40:
return 2;
default:
return 0;
}
@@ -449,17 +418,47 @@ aha_cmds(void *p)
}
break;
case 0x2C: /* AHA-1542CP sends this */
dev->DataBuf[0] = 0x00;
case 0x2C: /* Detect termination status */
/* Bits 7,6 are termination status and must be 1,0 for the BIOS to work. */
dev->DataBuf[0] = 0x40;
dev->DataReplyLeft = 1;
break;
case 0x33: /* AHA-1542CP sends this */
case 0x2D: /* ???? - Returns two bytes according to the microcode */
dev->DataBuf[0] = 0x00;
dev->DataBuf[1] = 0x00;
dev->DataBuf[2] = 0x00;
dev->DataBuf[3] = 0x00;
dev->DataReplyLeft = 256;
dev->DataBuf[0] = 0x00;
dev->DataReplyLeft = 2;
break;
case 0x33: /* Send the SCSISelect code decompressor program */
if (dev->cmd_33_len == 0x0000) {
/* If we are on a controller without this command, return invalid command. */
dev->DataReplyLeft = 0;
dev->Status |= STAT_INVCMD;
break;
}
/* We have to send (decompressor program length + 2 bytes of little endian size). */
dev->DataReplyLeft = dev->cmd_33_len + 2;
memset(dev->DataBuf, 0x00, dev->DataReplyLeft);
dev->DataBuf[0] = dev->cmd_33_len & 0xff;
dev->DataBuf[1] = (dev->cmd_33_len >> 8) & 0xff;
memcpy(&(dev->DataBuf[2]), dev->cmd_33_buf, dev->cmd_33_len);
break;
case 0x39: /* Receive 3 bytes: address high, address low, byte to write to that address. */
/* Since we are not running the actual microcode, just log the received values
(if logging is enabled) and break. */
aha_log("aha_cmds(): Command 0x39: %02X -> %02X%02X\n",
dev->CmdBuf[2], dev->CmdBuf[0], dev->CmdBuf[1]);
break;
case 0x40: /* Receive 2 bytes: address high, address low, then return one byte from that
address. */
aha_log("aha_cmds(): Command 0x40: %02X%02X\n",
dev->CmdBuf[0], dev->CmdBuf[1]);
dev->DataReplyLeft = 1;
dev->DataBuf[0] = 0xff;
break;
default:
@@ -641,6 +640,7 @@ static void
aha_pnp_config_changed(uint8_t ld, isapnp_device_config_t *config, void *priv)
{
x54x_t *dev = (x54x_t *) priv;
int i;
switch (ld) {
case 0:
@@ -660,18 +660,46 @@ aha_pnp_config_changed(uint8_t ld, isapnp_device_config_t *config, void *priv)
if (dev->Base != ISAPNP_IO_DISABLED)
x54x_io_set(dev, dev->Base, 4);
/*
* Patch the ROM BIOS image for stuff Adaptec deliberately
* made hard to understand. Well, maybe not, maybe it was
* their way of handling issues like these at the time..
*
* Patch 1: emulate the I/O ADDR SW setting by patching a
* byte in the BIOS that indicates the I/O ADDR
* switch setting on the board.
*/
if (dev->rom_ioaddr != 0x0000) {
/* Look up the I/O address in the table. */
for (i=0; i<8; i++)
if (aha_ports[i] == dev->Base) break;
if (i == 8) {
aha_log("%s: invalid I/O address %04x selected!\n",
dev->name, dev->Base);
return;
}
dev->bios.rom[dev->rom_ioaddr] = (uint8_t)i;
/* Negation of the DIP switches to satify the checksum. */
dev->bios.rom[dev->rom_ioaddr + 1] = (uint8_t)((i ^ 0xff) + 1);
}
dev->Irq = config->irq[0].irq;
dev->DmaChannel = config->dma[0].dma;
dev->nvr[1] = (dev->Irq - 9) | (dev->DmaChannel << 4);
aha_eeprom_save(dev);
dev->rom_addr = config->mem[0].base;
if (dev->rom_addr) {
mem_mapping_enable(&dev->bios.mapping);
aha_log("SCSI BIOS set to: %08X-%08X\n", dev->rom_addr, dev->rom_addr + config->mem[0].size - 1);
mem_mapping_set_addr(&dev->bios.mapping, dev->rom_addr, config->mem[0].size);
}
}
break;
#ifdef AHA1542CP_FDC
case 1:
if (dev->fdc_address) {
fdc_remove(dev->fdc);
@@ -691,6 +719,7 @@ aha_pnp_config_changed(uint8_t ld, isapnp_device_config_t *config, void *priv)
}
break;
#endif
}
}
@@ -803,6 +832,68 @@ aha_setbios(x54x_t *dev)
}
/* Get the SCSISelect code decompressor program from the microcode rom for the
AHA-1542CP. */
static void
aha_setmcode(x54x_t *dev)
{
uint32_t temp;
FILE *f;
/* Only if this device has a BIOS ROM. */
if (dev->mcode_path == NULL) return;
/* Open the microcode image file and make sure it exists. */
aha_log("%s: loading microcode from '%ls'\n", dev->name, dev->bios_path);
if ((f = rom_fopen(dev->mcode_path, L"rb")) == NULL) {
aha_log("%s: microcode ROM not found!\n", dev->name);
return;
}
/*
* Manually load and process the ROM image.
*
* We *could* use the system "rom_init" function here, but for
* this special case, we can't: we may need WRITE access to the
* memory later on.
*/
(void)fseek(f, 0L, SEEK_END);
temp = ftell(f);
(void)fseek(f, 0L, SEEK_SET);
if (temp < (dev->cmd_33_offset + dev->cmd_33_len - 1)) {
aha_log("%s: microcode ROM size invalid!\n", dev->name);
(void)fclose(f);
return;
}
/* Allocate the buffer and then read the real PnP ROM into it. */
if (aha1542cp_pnp_rom != NULL) {
free(aha1542cp_pnp_rom);
aha1542cp_pnp_rom = NULL;
}
aha1542cp_pnp_rom = (uint8_t *) malloc(dev->pnp_len + 7);
fseek(f, dev->pnp_offset, SEEK_SET);
(void)fread(aha1542cp_pnp_rom, dev->pnp_len, 1, f);
memset(&(aha1542cp_pnp_rom[4]), 0x00, 5);
fseek(f, dev->pnp_offset + 4, SEEK_SET);
(void)fread(&(aha1542cp_pnp_rom[9]), dev->pnp_len - 4, 1, f);
/* Even the real AHA-1542CP microcode seem to be flipping bit
4 to not erroneously indicate there is a range length. */
aha1542cp_pnp_rom[0x87] |= 0x04;
/* Insert the terminator and the checksum byte that will later
be filled in by the isapnp code. */
aha1542cp_pnp_rom[dev->pnp_len + 5] = 0x79;
aha1542cp_pnp_rom[dev->pnp_len + 6] = 0x00;
/* Load the SCSISelect decompression code. */
fseek(f, dev->cmd_33_offset, SEEK_SET);
(void)fread(dev->cmd_33_buf, dev->cmd_33_len, 1, f);
(void)fclose(f);
}
static void
aha_initnvr(x54x_t *dev)
{
@@ -853,6 +944,18 @@ aha_setnvr(x54x_t *dev)
}
void
aha1542cp_close(void *priv)
{
if (aha1542cp_pnp_rom != NULL) {
free(aha1542cp_pnp_rom);
aha1542cp_pnp_rom = NULL;
}
x54x_close(priv);
}
/* General initialization routine for all boards. */
static void *
aha_init(const device_t *info)
@@ -889,6 +992,11 @@ aha_init(const device_t *info)
dev->ven_cmds = aha_cmds;
dev->get_ven_data = aha_setup_data;
dev->mcode_path = NULL;
dev->cmd_33_len = 0x0000;
dev->cmd_33_offset = 0x0000;
memset(dev->cmd_33_buf, 0x00, 4096);
strcpy(dev->vendor, "Adaptec");
/* Perform per-board initialization. */
@@ -961,19 +1069,30 @@ aha_init(const device_t *info)
case AHA_154xCP:
strcpy(dev->name, "AHA-154xCP");
dev->bios_path = L"roms/scsi/adaptec/aha1542cp102.bin";
dev->mcode_path = L"roms/scsi/adaptec/908301-00_f_mcode_17c9.u12";
dev->nvr_path = L"aha1542cp.nvr";
dev->fw_rev = "F001";
dev->rom_shram = 0x3F80; /* shadow RAM address base */
dev->rom_shramsz = 128; /* size of shadow RAM */
dev->rom_ioaddr = 0x3F7E; /* [2:0] idx into addr table */
dev->rom_fwhigh = 0x0055; /* firmware version (hi/lo) */
dev->flags |= X54X_CDROM_BOOT;
dev->flags |= X54X_ISAPNP;
dev->ven_get_host_id = aha_get_host_id; /* function to return host ID from EEPROM */
dev->ven_get_irq = aha_get_irq; /* function to return IRQ from EEPROM */
dev->ven_get_dma = aha_get_dma; /* function to return DMA channel from EEPROM */
isapnp_add_card(aha1542cp_pnp_rom, sizeof(aha1542cp_pnp_rom), aha_pnp_config_changed, NULL, NULL, NULL, dev);
dev->ha_bps = 10000000.0; /* fast SCSI */
dev->ha_bps = 10000000.0; /* fast SCSI */
dev->pnp_len = 0x00be; /* length of the PnP ROM */
dev->pnp_offset = 0x533d; /* offset of the PnP ROM in the microcode ROM */
dev->cmd_33_len = 0x06dc; /* length of the SCSISelect code expansion routine returned by
SCSI controller command 0x33 */
dev->cmd_33_offset = 0x7000; /* offset of the SCSISelect code expansion routine in the
microcode ROM */
aha_setmcode(dev);
isapnp_add_card(aha1542cp_pnp_rom, dev->pnp_len + 7, aha_pnp_config_changed, NULL, NULL, NULL, dev);
#ifdef AHA1542CP_FDC
dev->fdc = device_add(&fdc_at_device);
#endif
break;
case AHA_1640:
@@ -1402,7 +1521,7 @@ const device_t aha154xcp_device = {
"Adaptec AHA-154xCP",
DEVICE_ISA | DEVICE_AT,
AHA_154xCP,
aha_init, x54x_close, NULL,
aha_init, aha1542cp_close, NULL,
{ NULL }, NULL, NULL,
NULL
};

13
src/scsi/scsi_x54x.c
View File

@@ -92,6 +92,8 @@ x54x_irq(x54x_t *dev, int set)
else
pci_clear_irq(dev->pci_slot, PCI_INTA);
} else {
x54x_log("%sing IRQ %i\n", set ? "Rais" : "Lower", irq);
if (set) {
if (dev->interrupt_type)
int_type = dev->interrupt_type(dev);
@@ -961,7 +963,7 @@ x54x_scsi_cmd(x54x_t *dev)
else
dev->callback_sub_phase = 2;
x54x_log("scsi_devices[%02i].Status = %02X\n", i, sd->status);
x54x_log("scsi_devices[%02i].Status = %02X\n", req->TargetID, sd->status);
}
@@ -1310,7 +1312,7 @@ x54x_cmd_callback(void *priv)
period = (1000000.0 / dev->ha_bps) * ((double) dev->temp_period);
timer_on(&dev->timer, dev->media_period + period + 10.0, 0);
x54x_log("Temporary period: %lf us (%" PRIi64 " periods)\n", dev->timer.period, dev->temp_period);
// x54x_log("Temporary period: %lf us (%" PRIi64 " periods)\n", dev->timer.period, dev->temp_period);
}
@@ -1371,6 +1373,13 @@ x54x_in(uint16_t port, void *priv)
break;
}
#ifdef ENABLE_X54X_LOG
if (port == 0x0332)
x54x_log("x54x_in(): %04X, %02X, %08X\n", port, ret, dev->DataReplyLeft);
else
x54x_log("x54x_in(): %04X, %02X\n", port, ret);
#endif
return(ret);
}