smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST500DM002-1BD142
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: KC45
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Mar  4 17:01:44 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is:     208 (intermediate), recommended: 208
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  600) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  84) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   114   079   006    -    62819464
  3 Spin_Up_Time            PO----   100   097   000    -    0
  4 Start_Stop_Count        -O--CK   089   089   020    -    12057
  5 Reallocated_Sector_Ct   PO--CK   091   091   036    -    3016
  7 Seek_Error_Rate         POSR--   081   060   030    -    4456352618
  9 Power_On_Hours          -O--CK   088   088   000    -    10708
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   097   097   020    -    3155
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   001   001   000    -    2607
188 Command_Timeout         -O--CK   100   099   000    -    0 0 3
189 High_Fly_Writes         -O-RCK   094   094   000    -    6
190 Airflow_Temperature_Cel -O---K   069   051   045    -    31 (0 3 31 20 0)
194 Temperature_Celsius     -O---K   031   049   000    -    31 (128 0 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   034   019   000    -    62819464
197 Current_Pending_Sector  -O--C-   099   001   000    -    64
198 Offline_Uncorrectable   ----C-   099   001   000    -    64
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    11100h+32m+49.365s
241 Total_LBAs_Written      ------   100   253   000    -    3067588235
242 Total_LBAs_Read         ------   100   253   000    -    1757605614
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    2248  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    2928  Device vendor specific log
0xbd       GPL     VS     252  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2446 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2446 [5] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:10:01.750  READ DMA EXT
  35 00 00 00 08 00 00 00 8e 52 9c e0 00     00:10:01.749  WRITE DMA EXT
  25 00 00 00 28 00 00 00 76 f1 c3 e0 00     00:10:01.743  READ DMA EXT
  35 00 00 00 08 00 00 00 63 d9 88 e0 00     00:10:01.742  WRITE DMA EXT
  25 00 00 00 70 00 00 00 63 42 80 e0 00     00:10:01.741  READ DMA EXT

Error 2445 [4] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:57.858  READ DMA EXT
  35 00 00 00 01 00 00 00 8e 52 80 e0 00     00:09:57.858  WRITE DMA EXT
  25 00 00 00 40 00 00 00 6d 23 24 e0 00     00:09:57.854  READ DMA EXT
  35 00 00 00 08 00 00 00 63 d8 c0 e0 00     00:09:57.853  WRITE DMA EXT
  25 00 00 00 88 00 00 00 63 3a 08 e0 00     00:09:57.846  READ DMA EXT

Error 2444 [3] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:53.960  READ DMA EXT
  25 00 00 00 20 00 00 00 77 99 56 e0 00     00:09:53.960  READ DMA EXT
  25 00 00 00 08 00 00 00 6b 35 10 e0 00     00:09:53.960  READ DMA EXT
  35 00 00 00 08 00 00 00 65 00 78 e0 00     00:09:53.959  WRITE DMA EXT
  35 00 00 00 08 00 00 00 64 f1 28 e0 00     00:09:53.959  WRITE DMA EXT

Error 2443 [2] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:50.159  READ DMA EXT
  25 00 00 00 20 00 00 00 77 98 f6 e0 00     00:09:50.158  READ DMA EXT
  25 00 00 00 04 00 00 00 6b 35 09 e0 00     00:09:50.042  READ DMA EXT
  35 00 00 00 28 00 00 00 64 ff f0 e0 00     00:09:50.041  WRITE DMA EXT
  35 00 00 00 08 00 00 00 62 b9 30 e0 00     00:09:50.041  WRITE DMA EXT

Error 2442 [1] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:46.195  READ DMA EXT
  25 00 00 00 20 00 00 00 77 9b d6 e0 00     00:09:46.195  READ DMA EXT
  25 00 00 00 08 00 00 00 6b 34 50 e0 00     00:09:46.175  READ DMA EXT
  35 00 00 00 10 00 00 00 62 b5 58 e0 00     00:09:46.175  WRITE DMA EXT
  35 00 00 00 08 00 00 00 5e eb a0 e0 00     00:09:46.174  WRITE DMA EXT

Error 2441 [0] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:42.372  READ DMA EXT
  35 00 00 00 01 00 00 00 f0 54 68 e0 00     00:09:42.371  WRITE DMA EXT
  25 00 00 00 28 00 00 00 86 57 cb e0 00     00:09:42.371  READ DMA EXT
  25 00 00 00 40 00 00 00 80 97 cb e0 00     00:09:42.370  READ DMA EXT
  25 00 00 00 20 00 00 00 77 98 6e e0 00     00:09:42.370  READ DMA EXT

Error 2440 [19] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:38.575  READ DMA EXT
  35 00 00 00 08 00 00 00 b3 1c 90 e0 00     00:09:38.574  WRITE DMA EXT
  25 00 00 00 1e 00 00 00 80 98 91 e0 00     00:09:38.574  READ DMA EXT
  25 00 00 00 30 00 00 00 77 8b 92 e0 00     00:09:38.564  READ DMA EXT
  25 00 00 00 08 00 00 00 63 f4 d8 e0 00     00:09:38.556  READ DMA EXT

Error 2439 [18] occurred at disk power-on lifetime: 9555 hours (398 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 f0 9a 50 00 00  Error: UNC at LBA = 0x02f09a50 = 49322576

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 02 f0 9a 41 e0 00     00:09:34.784  READ DMA EXT
  25 00 00 00 07 00 00 00 80 98 be e0 00     00:09:34.783  READ DMA EXT
  25 00 00 00 10 00 00 00 7b e5 a1 e0 00     00:09:34.770  READ DMA EXT
  35 00 00 00 08 00 00 00 5e eb 80 e0 00     00:09:34.769  WRITE DMA EXT
  35 00 00 00 08 00 00 00 03 d7 10 e0 00     00:09:34.769  WRITE DMA EXT

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      9550         430696824
# 2  Conveyance offline  Completed: read failure       90%      9550         430696824
# 3  Short offline       Completed: read failure       90%      9550         430696824

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    31 Celsius
Power Cycle Min/Max Temperature:     20/31 Celsius
Lifetime    Min/Max Temperature:     14/49 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        59 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (98)

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2           21  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS



