smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST500VT000-1DK142
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 0001SDC2
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Sep  7 17:42:06 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     192 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 104) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x10b1)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   110   092   006    -    157498888
  3 Spin_Up_Time            PO----   100   099   000    -    0
  4 Start_Stop_Count        -O--CK   098   098   020    -    2070
  5 Reallocated_Sector_Ct   PO--CK   099   099   036    -    264
  7 Seek_Error_Rate         POSR--   081   060   030    -    166732164
  9 Power_On_Hours          -O--CK   074   074   000    -    23277
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   098   098   020    -    2054
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   001   001   000    -    605
188 Command_Timeout         -O--CK   100   099   000    -    4
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   064   046   045    -    36 (Min/Max 33/36)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    34
192 Power-Off_Retract_Count -O--CK   100   100   000    -    1876
193 Load_Cycle_Count        -O--CK   099   099   000    -    2439
194 Temperature_Celsius     -O---K   036   054   000    -    36 (0 14 0 0 0)
197 Current_Pending_Sector  -O--C-   100   099   000    -    8
198 Offline_Uncorrectable   ----C-   100   099   000    -    8
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
254 Free_Fall_Sensor        -O--CK   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    2248  Device vendor specific log
0xa8       GPL,SL  VS      65  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    2864  Device vendor specific log
0xbd-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      10  Device vendor specific log
0xc3       GPL,SL  VS       8  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 662 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 662 [1] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: UNC at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 20 00 00 03 24 e4 98 40 00     00:01:19.775  READ FPDMA QUEUED
  61 00 00 00 40 00 00 00 09 19 50 40 00     00:01:19.775  WRITE FPDMA QUEUED
  61 00 00 00 10 00 00 00 09 19 38 40 00     00:01:19.758  WRITE FPDMA QUEUED
  61 00 00 00 30 00 00 00 09 19 00 40 00     00:01:19.758  WRITE FPDMA QUEUED
  61 00 00 00 40 00 00 00 09 18 b8 40 00     00:01:19.758  WRITE FPDMA QUEUED

Error 661 [0] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: UNC at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 00 47 61 a0 40 00     00:01:17.080  READ FPDMA QUEUED
  60 00 00 00 40 00 00 03 0a f7 f8 40 00     00:01:17.080  READ FPDMA QUEUED
  60 00 00 01 00 00 00 01 fe b8 60 40 00     00:01:17.080  READ FPDMA QUEUED
  60 00 00 00 d8 00 00 00 fc b8 48 40 00     00:01:17.080  READ FPDMA QUEUED
  60 00 00 00 08 00 00 00 90 23 98 40 00     00:01:17.080  READ FPDMA QUEUED

Error 660 [19] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: WP at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 02 06 49 00 40 00     00:01:14.080  WRITE FPDMA QUEUED
  61 00 00 00 10 00 00 01 07 9a a8 40 00     00:01:14.080  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 01 07 88 98 40 00     00:01:14.079  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 01 07 88 40 40 00     00:01:14.079  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 01 07 87 d0 40 00     00:01:14.079  WRITE FPDMA QUEUED

Error 659 [18] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: WP at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 00 06 48 08 40 00     00:01:11.419  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 01 07 89 20 40 00     00:01:11.419  READ FPDMA QUEUED
  60 00 00 00 08 00 00 00 47 60 58 40 00     00:01:11.419  READ FPDMA QUEUED
  60 00 00 00 08 00 00 01 ff 1c f8 40 00     00:01:11.419  READ FPDMA QUEUED
  60 00 00 00 08 00 00 02 37 35 10 40 00     00:01:11.418  READ FPDMA QUEUED

Error 658 [17] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: UNC at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 90 00 00 03 28 09 e8 40 00     00:01:03.489  READ FPDMA QUEUED
  60 00 00 00 08 00 00 03 7e 48 10 40 00     00:01:03.460  READ FPDMA QUEUED
  60 00 00 00 48 00 00 03 0c 16 68 40 00     00:01:03.455  READ FPDMA QUEUED
  60 00 00 00 20 00 00 03 28 08 c0 40 00     00:01:03.443  READ FPDMA QUEUED
  60 00 00 00 20 00 00 03 23 3b 58 40 00     00:01:03.425  READ FPDMA QUEUED

Error 657 [16] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: UNC at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 03 7e 48 10 40 00     00:00:11.232  READ DMA EXT
  25 00 00 00 40 00 00 03 7e 48 00 40 00     00:00:08.577  READ DMA EXT
  25 00 00 00 40 00 00 02 e6 ad 80 40 00     00:00:08.576  READ DMA EXT
  25 00 00 00 40 00 00 03 7e 7a 40 40 00     00:00:08.564  READ DMA EXT
  25 00 00 00 40 00 00 02 e6 ad 40 40 00     00:00:08.556  READ DMA EXT

Error 656 [15] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: UNC at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 03 7e 48 00 40 00     00:00:08.577  READ DMA EXT
  25 00 00 00 40 00 00 02 e6 ad 80 40 00     00:00:08.576  READ DMA EXT
  25 00 00 00 40 00 00 03 7e 7a 40 40 00     00:00:08.564  READ DMA EXT
  25 00 00 00 40 00 00 02 e6 ad 40 40 00     00:00:08.556  READ DMA EXT
  25 00 00 00 40 00 00 03 57 be c0 40 00     00:00:08.537  READ DMA EXT

Error 655 [14] occurred at disk power-on lifetime: 23267 hours (969 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 7e 48 10 00 00  Error: UNC at LBA = 0x037e4810 = 58607632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 03 7e 48 10 e3 00     00:02:32.771  READ DMA
  c8 00 00 00 30 00 00 03 0a fc 20 e3 00     00:02:32.770  READ DMA
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     00:02:32.770  FLUSH CACHE EXT
  27 00 00 00 00 00 00 00 00 00 00 e0 00     00:02:32.744  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 00     00:02:32.743  IDENTIFY DEVICE

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short captive       Completed without error       00%     23098         -
# 2  Short offline       Completed without error       00%     23081         -
# 3  Short offline       Interrupted (host reset)      00%     22990         -
# 4  Short offline       Completed without error       00%     22964         -
# 5  Short offline       Interrupted (host reset)      00%     22954         -
# 6  Short offline       Interrupted (host reset)      00%     22930         -
# 7  Short offline       Interrupted (host reset)      00%     22883         -
# 8  Short offline       Interrupted (host reset)      00%     22857         -
# 9  Short offline       Interrupted (host reset)      00%     22813         -
#10  Short offline       Interrupted (host reset)      00%     22790         -
#11  Short offline       Interrupted (host reset)      00%     22744         -
#12  Short offline       Interrupted (host reset)      00%     22707         -
#13  Short offline       Interrupted (host reset)      00%     22659         -
#14  Short offline       Interrupted (host reset)      00%     22635         -
#15  Short offline       Interrupted (host reset)      00%     22611         -
#16  Short offline       Interrupted (host reset)      00%     22565         -
#17  Short offline       Interrupted (host reset)      00%     22540         -
#18  Short offline       Interrupted (host reset)      00%     22507         -
#19  Short offline       Interrupted (host reset)      00%     22470         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    36 Celsius
Power Cycle Min/Max Temperature:     33/36 Celsius
Lifetime    Min/Max Temperature:     14/50 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        300 minutes
Min/Max recommended Temperature:      1/61 Celsius
Min/Max Temperature Limit:            2/60 Celsius
Temperature History Size (Index):    432 (266)

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

