smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.4
Device Model:     ST9250827AS
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 3.AAA
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database 7.3/5319
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 1.5 Gb/s
Local Time is:    Mon Mar 20 03:03:52 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  426) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  92) minutes.
SCT capabilities: 	       (0x0001)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   100   253   006    -    0
  3 Spin_Up_Time            PO----   099   099   000    -    0
  4 Start_Stop_Count        -O--CK   098   098   020    -    2912
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   079   060   030    -    13186920232
  9 Power_On_Hours          -O--CK   076   076   000    -    21735
 10 Spin_Retry_Count        PO--C-   100   100   034    -    0
 12 Power_Cycle_Count       -O--CK   098   098   020    -    2921
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   066   037   045    Past 34 (Min/Max 8/63 #42)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    15
192 Power-Off_Retract_Count -O--CK   100   100   000    -    1865
193 Load_Cycle_Count        -O---K   001   001   000    -    507399
194 Temperature_Celsius     -O-RC-   034   063   000    -    34 (0 8 0 0 0)
195 Hardware_ECC_Recovered  -O--C-   074   057   000    -    48952043
197 Current_Pending_Sector  ----C-   100   100   000    -    0
198 Offline_Uncorrectable   -OSRCK   100   100   000    -    0
199 UDMA_CRC_Error_Count    ------   200   090   000    -    1724
200 Multi_Zone_Error_Rate   -O--CK   100   253   000    -    0
202 Data_Address_Mark_Errs  ------   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory not supported

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03           SL  R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07           SL  R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10           SL  R/O      1  NCQ Command Error log
0x11           SL  R/O      1  SATA Phy Event Counters log
0x20           SL  R/O      1  Streaming performance log [OBS-8]
0x21           SL  R/O      1  Write stream error log
0x22           SL  R/O      1  Read stream error log
0x23           SL  R/O      1  Delayed sector log [OBS-8]
0x80-0x9f      SL  R/W     16  Host vendor specific log
0xa0           SL  VS       1  Device vendor specific log
0xa1           SL  VS      20  Device vendor specific log
0xa2           SL  VS     101  Device vendor specific log
0xa8           SL  VS      20  Device vendor specific log
0xa9           SL  VS       1  Device vendor specific log
0xe0           SL  R/W      1  SCT Command/Status
0xe1           SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
ATA Error Count: 1746 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1746 occurred at disk power-on lifetime: 5259 hours (219 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 2f 34 51 f4 e0  Error: ICRC, ABRT 47 sectors at LBA = 0x00f45134 = 16011572

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 03 f0 73 50 f4 e0 00      00:12:06.575  READ DMA EXT
  25 03 10 63 50 f4 e0 00      00:12:06.572  READ DMA EXT
  25 03 f0 73 4f f4 e0 00      00:12:06.571  READ DMA EXT
  25 03 10 63 4f f4 e0 00      00:12:06.568  READ DMA EXT
  25 03 f0 73 4e f4 e0 00      00:12:06.568  READ DMA EXT

Error 1745 occurred at disk power-on lifetime: 5259 hours (219 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 2f 34 3d f4 e0  Error: ICRC, ABRT 47 sectors at LBA = 0x00f43d34 = 16006452

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 03 f0 73 3c f4 e0 00      00:12:05.890  READ DMA EXT
  25 03 10 63 3c f4 e0 00      00:12:05.886  READ DMA EXT
  25 03 f0 73 3b f4 e0 00      00:12:05.913  READ DMA EXT
  25 03 10 63 3b f4 e0 00      00:12:05.913  READ DMA EXT
  25 03 f0 73 3a f4 e0 00      00:12:05.909  READ DMA EXT

Error 1744 occurred at disk power-on lifetime: 5259 hours (219 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 5f dc 3f db e0  Error: ICRC, ABRT 95 sectors at LBA = 0x00db3fdc = 14368732

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 03 f0 4b 3f db e0 00      00:12:04.713  READ DMA EXT
  25 03 10 3b 3f db e0 00      00:12:04.712  READ DMA EXT
  25 03 f0 4b 3e db e0 00      00:12:04.709  READ DMA EXT
  25 03 10 3b 3e db e0 00      00:12:04.708  READ DMA EXT
  25 03 f0 4b 3d db e0 00      00:12:04.705  READ DMA EXT

Error 1743 occurred at disk power-on lifetime: 5259 hours (219 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 2f bc b9 c4 e0  Error: ICRC, ABRT 47 sectors at LBA = 0x00c4b9bc = 12892604

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 03 40 ab b9 c4 e0 00      00:12:01.759  READ DMA EXT
  25 03 20 8b b9 c4 e0 00      00:12:01.756  READ DMA EXT
  25 03 02 53 de 19 e0 00      00:12:01.755  READ DMA EXT
  25 03 10 5b b2 43 e0 00      00:12:01.752  READ DMA EXT
  25 03 20 3b b2 43 e0 00      00:12:01.972  READ DMA EXT

Error 1742 occurred at disk power-on lifetime: 5259 hours (219 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 6f c4 a6 7a e0  Error: ICRC, ABRT 111 sectors at LBA = 0x007aa6c4 = 8038084

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 03 f0 43 a6 7a e0 00      00:11:55.537  READ DMA EXT
  25 03 f0 53 a5 7a e0 00      00:11:55.534  READ DMA EXT
  25 03 10 b2 86 50 e0 00      00:11:55.533  READ DMA EXT
  25 03 f0 c2 85 50 e0 00      00:11:55.530  READ DMA EXT
  25 03 10 43 a5 7a e0 00      00:11:55.529  READ DMA EXT

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       521 (0x0209)
Device State:                        Active (0)
Current Temperature:                    34 Celsius
Power Cycle Min/Max Temperature:     --/ 0 Celsius
Lifetime    Min/Max Temperature:     --/ 0 Celsius

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            6  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0009  2            5  Transition from drive PhyRdy to drive PhyNRdy
0x8002  2            0  Vendor specific
0x8003  2            3  Vendor specific
0x8004  2            0  Vendor specific

