smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.4
Device Model:     ST9250827AS
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: 3.AAA
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database 7.3/5319
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Apr 25 00:30:41 2022 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  426) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  92) minutes.
SCT capabilities: 	       (0x0001)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   100   253   006    -    0
  3 Spin_Up_Time            PO----   099   099   000    -    0
  4 Start_Stop_Count        -O--CK   095   095   020    -    5861
  5 Reallocated_Sector_Ct   PO--CK   096   096   036    -    163
  7 Seek_Error_Rate         POSR--   066   060   030    -    507334103601
  9 Power_On_Hours          -O--CK   093   093   000    -    6730
 10 Spin_Retry_Count        PO--C-   100   100   034    -    0
 12 Power_Cycle_Count       -O--CK   095   095   020    -    5875
187 Reported_Uncorrect      -O--CK   001   001   000    -    1250
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   064   027   045    Past 36 (Min/Max 18/73 #2387)
191 G-Sense_Error_Rate      -O--CK   099   099   000    -    3775
192 Power-Off_Retract_Count -O--CK   098   098   000    -    4252
193 Load_Cycle_Count        -O---K   014   014   000    -    173176
194 Temperature_Celsius     -O-RC-   036   073   000    -    36 (0 18 0 0 0)
195 Hardware_ECC_Recovered  -O--C-   068   051   000    -    108872224
197 Current_Pending_Sector  ----C-   100   091   000    -    0
198 Offline_Uncorrectable   -OSRCK   100   091   000    -    0
199 UDMA_CRC_Error_Count    ------   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O--CK   100   253   000    -    0
202 Data_Address_Mark_Errs  ------   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory not supported

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03           SL  R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07           SL  R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10           SL  R/O      1  NCQ Command Error log
0x11           SL  R/O      1  SATA Phy Event Counters log
0x20           SL  R/O      1  Streaming performance log [OBS-8]
0x21           SL  R/O      1  Write stream error log
0x22           SL  R/O      1  Read stream error log
0x23           SL  R/O      1  Delayed sector log [OBS-8]
0x80-0x9f      SL  R/W     16  Host vendor specific log
0xa0           SL  VS       1  Device vendor specific log
0xa1           SL  VS      20  Device vendor specific log
0xa2           SL  VS     101  Device vendor specific log
0xa8           SL  VS      20  Device vendor specific log
0xa9           SL  VS       1  Device vendor specific log
0xe0           SL  R/W      1  SCT Command/Status
0xe1           SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
ATA Error Count: 1256 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1256 occurred at disk power-on lifetime: 6003 hours (250 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d3 bc 2e e2  Error: UNC at LBA = 0x022ebcd3 = 36617427

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 d0 bc 2e e2 00      00:36:41.740  READ DMA
  c8 00 08 c8 bc 2e e2 00      00:36:41.740  READ DMA
  c8 00 08 c0 bc 2e e2 00      00:36:41.740  READ DMA
  c8 00 08 b8 bc 2e e2 00      00:36:41.739  READ DMA
  c8 00 08 b0 bc 2e e2 00      00:36:41.739  READ DMA

Error 1255 occurred at disk power-on lifetime: 5994 hours (249 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 09 1d 70 ee  Error: UNC at LBA = 0x0e701d09 = 242228489

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 08 1d 70 ee 00      00:41:29.809  READ DMA
  ec 00 00 00 00 00 a0 02      00:41:29.809  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02      00:41:29.809  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 02      00:41:32.643  IDENTIFY DEVICE
  c8 00 08 00 1d 70 ee 00      00:41:32.640  READ DMA

Error 1254 occurred at disk power-on lifetime: 5994 hours (249 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 00 1d 70 ee  Error: UNC at LBA = 0x0e701d00 = 242228480

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 1d 70 ee 00      00:41:29.809  READ DMA
  c8 00 08 f8 1c 70 ee 00      00:41:29.809  READ DMA
  c8 00 08 f0 1c 70 ee 00      00:41:29.809  READ DMA
  c8 00 08 e8 1c 70 ee 00      00:41:29.808  READ DMA
  c8 00 08 e0 1c 70 ee 00      00:41:29.808  READ DMA

Error 1253 occurred at disk power-on lifetime: 5994 hours (249 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 00 1d 70 e0  Error: UNC at LBA = 0x00701d00 = 7347456

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 00 1c 70 e0 00      00:41:26.809  READ DMA EXT
  25 00 00 00 1a 70 e0 00      00:41:26.770  READ DMA EXT
  25 00 00 00 18 70 e0 00      00:41:26.766  READ DMA EXT
  25 00 00 00 16 70 e0 00      00:41:26.760  READ DMA EXT
  25 00 00 00 14 70 e0 00      00:41:26.756  READ DMA EXT

Error 1252 occurred at disk power-on lifetime: 5993 hours (249 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 c1 94 a9 e9  Error: UNC at LBA = 0x09a994c1 = 162108609

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 c0 94 a9 e9 00      00:28:45.000  READ DMA
  c8 00 08 b8 94 a9 e9 00      00:28:45.000  READ DMA
  c8 00 08 b0 94 a9 e9 00      00:28:45.000  READ DMA
  c8 00 08 a8 94 a9 e9 00      00:28:44.999  READ DMA
  c8 00 08 a0 94 a9 e9 00      00:28:44.999  READ DMA

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      6223         -
# 2  Extended offline    Completed: read failure       90%      6009         36617427
# 3  Extended offline    Completed: read failure       90%      6009         36617427
# 4  Short offline       Completed: read failure       90%      6009         36617427
# 5  Short offline       Completed: read failure       90%      5808         242210325
# 6  Short offline       Completed: read failure       90%      5808         242228489
# 7  Short offline       Completed: read failure       90%      5798         6162464

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       521 (0x0209)
Device State:                        Active (0)
Current Temperature:                    36 Celsius
Power Cycle Min/Max Temperature:     --/ 0 Celsius
Lifetime    Min/Max Temperature:     --/ 0 Celsius

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
0x8002  2            0  Vendor specific
0x8003  2            0  Vendor specific
0x8004  2            0  Vendor specific

