mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
281
HDD/Hitachi/HCS5/HCS5C1032CLA382/6142EC856A72
Normal file
281
HDD/Hitachi/HCS5/HCS5C1032CLA382/6142EC856A72
Normal file
@@ -0,0 +1,281 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Hitachi CinemaStar 5K1000
|
||||
Device Model: HCS5C1032CLA382
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000cca ...
|
||||
Firmware Version: JCFOR39G
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 5700 rpm
|
||||
Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Tue Jun 28 14:22:44 2022 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 6396) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 120) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 099 099 016 - 2
|
||||
2 Throughput_Performance P-S--- 100 100 054 - 0
|
||||
3 Spin_Up_Time POS--- 121 121 024 - 177 (Average 177)
|
||||
4 Start_Stop_Count -O--C- 099 099 000 - 6660
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 020 - 0
|
||||
9 Power_On_Hours -O--C- 094 094 000 - 47947
|
||||
10 Spin_Retry_Count PO--C- 100 100 060 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 2839
|
||||
192 Power-Off_Retract_Count -O--CK 095 095 000 - 6660
|
||||
193 Load_Cycle_Count -O--C- 095 095 000 - 6660
|
||||
194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 10/56)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O---K 100 100 000 - 1
|
||||
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 7 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
Device Error Count: 18 (device log contains only the most recent 4 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 18 [1] occurred at disk power-on lifetime: 47928 hours (1997 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 0b 00 00 0a 4f 14 55 00 00 Error: UNC at LBA = 0x0a4f1455 = 172954709
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 90 00 00 00 61 5e 88 40 00 9d+22:21:16.969 READ FPDMA QUEUED
|
||||
60 00 08 00 88 00 00 00 61 5e 80 40 00 9d+22:21:16.968 READ FPDMA QUEUED
|
||||
60 00 08 00 80 00 00 00 61 5e 78 40 00 9d+22:21:16.967 READ FPDMA QUEUED
|
||||
60 00 08 00 78 00 00 00 61 5e 70 40 00 9d+22:21:16.966 READ FPDMA QUEUED
|
||||
60 00 08 00 70 00 00 00 61 5e 68 40 00 9d+22:21:16.965 READ FPDMA QUEUED
|
||||
|
||||
Error 17 [0] occurred at disk power-on lifetime: 47928 hours (1997 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 cb 00 00 0a 4f 14 55 00 00 Error: UNC at LBA = 0x0a4f1455 = 172954709
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 08 00 00 00 61 5e 10 40 00 9d+22:20:55.280 READ FPDMA QUEUED
|
||||
60 01 00 00 f8 00 00 0a 4f 1b 20 40 00 9d+22:20:55.279 READ FPDMA QUEUED
|
||||
60 01 00 00 f0 00 00 0a 4f 1a 20 40 00 9d+22:20:55.279 READ FPDMA QUEUED
|
||||
60 01 00 00 e8 00 00 0a 4f 19 20 40 00 9d+22:20:55.279 READ FPDMA QUEUED
|
||||
60 01 00 00 e0 00 00 0a 4f 18 20 40 00 9d+22:20:55.278 READ FPDMA QUEUED
|
||||
|
||||
Error 16 [3] occurred at disk power-on lifetime: 47928 hours (1997 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 ab 00 00 0a 4f 14 55 00 00 Error: UNC at LBA = 0x0a4f1455 = 172954709
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 40 00 00 00 61 59 c0 40 00 9d+22:20:33.417 READ FPDMA QUEUED
|
||||
60 00 08 00 38 00 00 00 60 de 18 40 00 9d+22:20:33.415 READ FPDMA QUEUED
|
||||
60 01 00 00 30 00 00 0a 4f 1b 00 40 00 9d+22:20:33.412 READ FPDMA QUEUED
|
||||
60 01 00 00 28 00 00 0a 4f 1a 00 40 00 9d+22:20:33.412 READ FPDMA QUEUED
|
||||
60 01 00 00 20 00 00 0a 4f 19 00 40 00 9d+22:20:33.412 READ FPDMA QUEUED
|
||||
|
||||
Error 15 [2] occurred at disk power-on lifetime: 47928 hours (1997 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 8b 00 00 0a 4f 14 55 00 00 Error: UNC at LBA = 0x0a4f1455 = 172954709
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 c8 00 00 0a 4f 1a e0 40 00 9d+22:20:11.890 READ FPDMA QUEUED
|
||||
60 01 00 00 c0 00 00 0a 4f 19 e0 40 00 9d+22:20:11.889 READ FPDMA QUEUED
|
||||
60 01 00 00 b8 00 00 0a 4f 18 e0 40 00 9d+22:20:11.889 READ FPDMA QUEUED
|
||||
60 01 00 00 b0 00 00 0a 4f 17 e0 40 00 9d+22:20:11.889 READ FPDMA QUEUED
|
||||
60 01 00 00 a8 00 00 0a 4f 16 e0 40 00 9d+22:20:11.889 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 45976 -
|
||||
# 2 Extended offline Completed without error 00% 2 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/33 Celsius
|
||||
Lifetime Min/Max Temperature: 10/56 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 128 (44)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 2839 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 47947 --- Power-on Hours
|
||||
0x01 0x018 6 218979188337 --- Logical Sectors Written
|
||||
0x01 0x020 6 602790156 --- Number of Write Commands
|
||||
0x01 0x028 6 18382406649 --- Logical Sectors Read
|
||||
0x01 0x030 6 181120249 --- Number of Read Commands
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 34570 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 34569 --- Head Flying Hours
|
||||
0x03 0x018 4 6660 --- Head Load Events
|
||||
0x03 0x020 4 1 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 16 --- Read Recovery Attempts
|
||||
0x03 0x030 4 2 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 557 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 35 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 32 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 56 --- Highest Temperature
|
||||
0x05 0x028 1 10 --- Lowest Temperature
|
||||
0x05 0x030 1 54 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 0 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 52 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 0 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 8428 --- Number of Hardware Resets
|
||||
0x06 0x010 4 7392 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
Reference in New Issue
Block a user