80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 3633, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2023-02-14 01:25:13 +03:00
parent 7232be27ad
commit 06d1e49c98
3633 changed files with 600014 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

127
HDD/Maxtor/6E030/6E030L0/C45F2404E85F Normal file
View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 i386] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 8
Device Model: Maxtor 6E030L0
Serial Number: --
Firmware Version: NAR61590
User Capacity: 30,750,031,872 bytes [30.7 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Sat Oct 15 06:16:25 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 192
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1021) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
3 Spin_Up_Time POS--K 224 223 063 - 8966
4 Start_Stop_Count -O--CK 253 253 000 - 774
5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0
6 Read_Channel_Margin P----- 253 253 100 - 0
7 Seek_Error_Rate -O-R-- 253 251 000 - 0
8 Seek_Time_Performance POS--K 246 244 187 - 61897
9 Power_On_Minutes -O--CK 211 211 000 - 544h+33m
10 Spin_Retry_Count PO-R-K 253 252 157 - 0
11 Calibration_Retry_Count PO-R-K 253 252 223 - 0
12 Power_Cycle_Count -O--CK 251 251 000 - 1147
192 Power-Off_Retract_Count -O--CK 253 253 000 - 768
193 Load_Cycle_Count -O--CK 253 253 000 - 1246
194 Temperature_Celsius -O--CK 253 253 000 - 42
195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 1070
196 Reallocated_Event_Count ---R-- 253 253 000 - 0
197 Current_Pending_Sector ---R-- 253 253 000 - 0
198 Offline_Uncorrectable ---R-- 253 253 000 - 0
199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 10
202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0
203 Run_Out_Cancel PO-R-- 253 252 180 - 0
204 Soft_ECC_Correction -O-R-- 253 252 000 - 0
205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0
207 Spin_High_Current -O-R-K 253 252 000 - 0
208 Spin_Buzz -O-R-K 253 252 000 - 0
209 Offline_Seek_Performnce --S--K 189 183 000 - 0
99 Unknown_Attribute --S--- 253 253 000 - 0
100 Unknown_Attribute --S--- 253 253 000 - 0
101 Unknown_Attribute --S--- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

288
HDD/Maxtor/STM3160/STM3160815AS/223F9A0C72D1 Normal file
View File

@@ -0,0 +1,288 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3160815AS
Serial Number: --
Firmware Version: 4.AAB
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Aug 16 22:25:57 2022 +05
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0
3 Spin_Up_Time PO---- 098 097 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1780
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 084 060 030 - 318086429
9 Power_On_Hours -O--CK 078 078 000 - 19399
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1738
187 Reported_Uncorrect -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 064 056 045 - 36 (Min/Max 24/36)
194 Temperature_Celsius -O---K 036 044 000 - 36 (0 15 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 118 071 000 - 27070
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 1 Device vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL,SL VS 101 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
0xff GPL - 23040 Reserved
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 506 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 506 [5] occurred at disk power-on lifetime: 11372 hours (473 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:16:55.828 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:16:55.827 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:17:00.185 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 01 01 00 12 96 00 a1 6e e0 00 00:17:00.126 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:16:59.901 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 505 [4] occurred at disk power-on lifetime: 11372 hours (473 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:16:55.828 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:16:55.827 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:16:55.827 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 01 00 12 9e 00 a1 af e0 00 00:16:55.827 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 12 9e 00 a1 af e0 00 00:16:55.827 READ MULTIPLE EXT
Error 504 [3] occurred at disk power-on lifetime: 11527 hours (480 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:03:24.751 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:03:29.138 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:03:29.079 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 01 01 00 12 96 00 a1 6e e0 00 00:03:28.854 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:03:28.791 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 503 [2] occurred at disk power-on lifetime: 11527 hours (480 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:03:24.751 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:03:24.751 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:03:24.751 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 01 00 12 9e 00 a1 af e0 00 00:03:24.751 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 12 9e 00 a1 af e0 00 00:03:24.750 READ MULTIPLE EXT
Error 502 [1] occurred at disk power-on lifetime: 11372 hours (473 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:16:55.828 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:16:55.827 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:17:00.185 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 01 01 00 12 96 00 a1 6e e0 00 00:17:00.126 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:16:59.901 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 501 [0] occurred at disk power-on lifetime: 11372 hours (473 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:16:55.828 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:16:55.827 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:16:55.827 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 01 00 12 9e 00 a1 af e0 00 00:16:55.827 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 12 9e 00 a1 af e0 00 00:16:55.827 READ MULTIPLE EXT
Error 500 [19] occurred at disk power-on lifetime: 11527 hours (480 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:03:24.751 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:03:29.138 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:03:29.079 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 01 01 00 12 96 00 a1 6e e0 00 00:03:28.854 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:03:28.791 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 499 [18] occurred at disk power-on lifetime: 11527 hours (480 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 e2 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 00 01 01 00 12 96 00 a1 6e e2 00 00:03:24.751 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 12 96 00 a1 6e e0 00 00:03:24.751 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 00 00 00 12 96 00 a1 6e e2 00 00:03:24.751 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 01 00 12 9e 00 a1 af e0 00 00:03:24.751 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 12 9e 00 a1 af e0 00 00:03:24.750 READ MULTIPLE EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 19 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

290
HDD/Maxtor/STM3250/STM3250820AS/4ED71182C2CF Normal file
View File

@@ -0,0 +1,290 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Maxtor DiamondMax 21
Device Model: MAXTOR STM3250820AS
Serial Number: --
Firmware Version: 3.AAE
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sun Sep 4 11:45:23 2022 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 114 089 006 - 81562320
3 Spin_Up_Time PO---- 096 095 000 - 0
4 Start_Stop_Count -O--CK 096 096 020 - 4357
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 5
7 Seek_Error_Rate POSR-- 086 060 030 - 409855603
9 Power_On_Hours -O--CK 088 088 000 - 10675
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 096 096 020 - 4755
187 Reported_Uncorrect -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 060 031 045 Past 40 (Min/Max 40/40)
194 Temperature_Celsius -O---K 040 069 000 - 40 (0 11 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 083 055 000 - 189709558
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 1 Device vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL,SL VS 101 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
0xff GPL - 23040 Reserved
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 639 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 639 [18] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:03:58.970 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:03:58.970 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.427 READ MULTIPLE EXT
Error 638 [17] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:02.979 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 637 [16] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:43:02.979 READ MULTIPLE EXT
Error 636 [15] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:05.846 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:04:05.782 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:03.427 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 635 [14] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:03:58.970 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:03:58.970 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:04:03.427 READ MULTIPLE EXT
Error 634 [13] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:02.979 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 633 [12] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:43:03.362 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:43:03.299 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:43:03.162 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:43:03.045 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:43:02.979 READ MULTIPLE EXT
Error 632 [11] occurred at disk power-on lifetime: 501 hours (20 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 01 01 00 00 00 00 00 00 ed 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:05.846 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:04:05.782 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:04:03.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:04:03.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:04:03.427 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Extended Self-test Log Version: 1 (1 sectors)
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

289
HDD/Maxtor/STM3808/STM380815AS/AE72EE9C9C6F Normal file
View File

@@ -0,0 +1,289 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Maxtor DiamondMax 21
Device Model: MAXTOR STM380815AS
Serial Number: --
Firmware Version: 4.AAB
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Sep 15 00:27:56 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1412
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 088 060 030 - 678691954
9 Power_On_Hours -O--CK 039 039 000 - 53802
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1423
187 Reported_Uncorrect -O--CK 001 001 000 - 2818
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 059 047 045 - 41 (Min/Max 38/41)
194 Temperature_Celsius -O---K 041 053 000 - 41 (0 252 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 096 076 000 - 93889629
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 1 Device vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL,SL VS 101 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
0xff GPL - 23040 Reserved
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2940 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2940 [19] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:35.804 READ DMA
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:39.427 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:35.853 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:35.850 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:35.850 READ DMA
Error 2939 [18] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:35.804 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:35.803 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:35.853 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:35.850 READ DMA
c8 00 d8 00 08 00 00 48 00 55 c7 e0 00 00:15:35.850 READ DMA
Error 2938 [17] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:28.595 READ DMA
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:32.185 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:28.628 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:28.624 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:28.624 READ DMA
Error 2937 [16] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:28.595 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:28.595 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:28.628 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:28.624 READ DMA
c8 00 d8 00 08 00 00 48 00 55 c7 e0 00 00:15:28.624 READ DMA
Error 2936 [15] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:35.804 READ DMA
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:39.427 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:35.853 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:35.850 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:35.850 READ DMA
Error 2935 [14] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:35.804 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:35.803 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:35.853 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:35.850 READ DMA
c8 00 d8 00 08 00 00 48 00 55 c7 e0 00 00:15:35.850 READ DMA
Error 2934 [13] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:28.595 READ DMA
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:32.185 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:28.628 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:28.624 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:28.624 READ DMA
Error 2933 [12] occurred at disk power-on lifetime: 53161 hours (2215 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 57 00 55 a8 e0 00 Error: UNC at LBA = 0x570055a8 = 1459639720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 d8 00 08 00 00 57 00 55 a7 e0 00 00:15:28.595 READ DMA
c8 00 d8 00 08 00 00 d6 00 55 27 e0 00 00:15:28.595 READ DMA
c8 00 d8 00 08 00 00 9d 00 01 a7 e0 00 00:15:28.628 READ DMA
c8 00 d8 00 08 00 00 49 00 55 97 e0 00 00:15:28.624 READ DMA
c8 00 d8 00 08 00 00 48 00 55 c7 e0 00 00:15:28.624 READ DMA
SMART Extended Self-test Log Version: 1 (1 sectors)
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS