mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
317
HDD/Seagate/ST2000/ST2000DM001-9YN164/8A373BF0CFC7
Normal file
317
HDD/Seagate/ST2000/ST2000DM001-9YN164/8A373BF0CFC7
Normal file
@@ -0,0 +1,317 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p12 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Barracuda 7200.14 (AF)
|
||||
Device Model: ST2000DM001-9YN164
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: CC4H
|
||||
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database 7.2/5254
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
|
||||
Local Time is: Sun Aug 14 12:34:21 2022 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 254 (maximum performance)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 575) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 223) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x3085) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 118 099 006 - 187295952
|
||||
3 Spin_Up_Time PO---- 095 094 000 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 104
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 079 060 030 - 13128501680
|
||||
9 Power_On_Hours -O--CK 065 065 000 - 31348
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 101
|
||||
183 Runtime_Bad_Block -O--CK 001 001 000 - 4005
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 109
|
||||
188 Command_Timeout -O--CK 100 097 000 - 119 119 132
|
||||
189 High_Fly_Writes -O-RCK 099 099 000 - 1
|
||||
190 Airflow_Temperature_Cel -O---K 058 051 045 - 42 (Min/Max 27/48)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 70
|
||||
193 Load_Cycle_Count -O--CK 050 050 000 - 100029
|
||||
194 Temperature_Celsius -O---K 042 049 000 - 42 (0 19 0 0 0)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 131 000 - 71982
|
||||
240 Head_Flying_Hours ------ 100 253 000 - 24686h+10m+01.953s
|
||||
241 Total_LBAs_Written ------ 100 253 000 - 64996686611340
|
||||
242 Total_LBAs_Read ------ 100 253 000 - 194221905140606
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 4496 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xab GPL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 5067 Device vendor specific log
|
||||
0xbd GPL VS 512 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 109 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 109 [8] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 08 00 00 69 e1 af c8 40 00 15d+12:26:16.034 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 69 e1 af b8 40 00 15d+12:26:16.034 READ FPDMA QUEUED
|
||||
60 00 00 06 80 00 00 2a 44 4f f0 40 00 15d+12:26:16.034 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:16.034 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 15d+12:26:15.986 READ LOG EXT
|
||||
|
||||
Error 108 [7] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 08 00 00 69 e1 af c8 40 00 15d+12:26:13.086 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 69 e1 af b8 40 00 15d+12:26:13.086 READ FPDMA QUEUED
|
||||
60 00 00 06 80 00 00 2a 44 4f f0 40 00 15d+12:26:13.086 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:13.086 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 15d+12:26:13.086 READ LOG EXT
|
||||
|
||||
Error 107 [6] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 02 b0 00 00 28 65 c2 88 40 00 15d+12:26:10.331 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 28 65 bf d8 40 00 15d+12:26:10.331 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 28 65 ba f8 40 00 15d+12:26:10.330 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:10.322 READ FPDMA QUEUED
|
||||
61 00 00 00 10 00 00 00 00 02 10 40 00 15d+12:26:10.315 WRITE FPDMA QUEUED
|
||||
|
||||
Error 106 [5] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 08 00 00 00 0a 29 87 58 40 00 15d+12:26:07.414 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 2a 42 c1 38 40 00 15d+12:26:07.414 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 69 e1 b0 80 40 00 15d+12:26:07.414 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 21 68 40 00 15d+12:26:07.414 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:07.414 READ FPDMA QUEUED
|
||||
|
||||
Error 105 [4] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 02 b0 00 00 9f 17 21 68 40 00 15d+12:26:04.597 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 1e b8 40 00 15d+12:26:04.597 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 15d+12:26:04.511 READ LOG EXT
|
||||
60 00 00 02 b0 00 00 9f 17 1c 08 40 00 15d+12:26:01.701 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 13 f8 40 00 15d+12:26:01.675 READ FPDMA QUEUED
|
||||
|
||||
Error 104 [3] occurred at disk power-on lifetime: 25540 hours (1064 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 9f 17 20 18 00 00 Error: UNC at LBA = 0x9f172018 = 2669092888
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 02 b0 00 00 9f 17 1c 08 40 00 15d+12:26:01.701 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 13 f8 40 00 15d+12:26:01.675 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 19 58 40 00 15d+12:26:01.670 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 16 a8 40 00 15d+12:26:01.662 READ FPDMA QUEUED
|
||||
60 00 00 02 b0 00 00 9f 17 0e 98 40 00 15d+12:25:59.589 READ FPDMA QUEUED
|
||||
|
||||
Error 103 [2] occurred at disk power-on lifetime: 24379 hours (1015 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 7b c4 47 a8 00 00 Error: UNC at LBA = 0x7bc447a8 = 2076460968
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 d0 ff 00 80 00 00 7b ba 3f 00 40 00 01:39:52.841 READ DMA EXT
|
||||
25 d0 ff 00 80 00 00 7b ba 3e 80 40 00 01:39:52.832 READ DMA EXT
|
||||
25 d0 ff 00 80 00 00 7b aa 4d 00 40 00 01:39:50.025 READ DMA EXT
|
||||
25 d0 ff 00 80 00 00 7b aa 4c 80 40 00 01:39:50.013 READ DMA EXT
|
||||
25 d0 ff 00 80 00 00 7b aa 4c 00 40 00 01:39:50.012 READ DMA EXT
|
||||
|
||||
Error 102 [1] occurred at disk power-on lifetime: 24369 hours (1015 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 7b c4 47 a8 00 00 Error: UNC at LBA = 0x7bc447a8 = 2076460968
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 d8 00 00 80 00 00 7b c4 47 80 40 00 01:59:04.504 READ DMA EXT
|
||||
25 d8 00 00 80 00 00 7b c4 47 00 40 00 01:59:04.504 READ DMA EXT
|
||||
25 d8 00 00 80 00 00 7b c4 46 80 40 00 01:59:04.503 READ DMA EXT
|
||||
25 d8 00 00 80 00 00 7b c4 46 00 40 00 01:59:04.503 READ DMA EXT
|
||||
25 d8 00 00 80 00 00 7b c4 45 80 40 00 01:59:04.502 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 20066 -
|
||||
# 2 Short offline Completed without error 00% 20066 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 42 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/48 Celsius
|
||||
Lifetime Min/Max Temperature: 19/49 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 4523 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user