mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
188
HDD/Seagate/ST9160/ST9160310AS/2566CA49C494
Normal file
188
HDD/Seagate/ST9160/ST9160310AS/2566CA49C494
Normal file
@@ -0,0 +1,188 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 5400.5
|
||||
Device Model: ST9160310AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: DE06
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Sun Aug 14 12:29:36 2022 BST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 208 (intermediate), recommended: 208
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x73) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 59) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x103f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 114 099 006 - 83176570
|
||||
3 Spin_Up_Time PO---- 099 096 085 - 0
|
||||
4 Start_Stop_Count -O--CK 098 098 020 - 2771
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 080 060 030 - 108578468
|
||||
9 Power_On_Hours -O--CK 097 097 000 - 2768
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 098 098 020 - 2750
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 8590196743
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 058 043 045 Past 42 (Min/Max 31/42 #4)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 354
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 202
|
||||
193 Load_Cycle_Count -O--CK 093 093 000 - 15768
|
||||
194 Temperature_Celsius -O---K 042 057 000 - 42 (0 9 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 048 037 000 - 83176570
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
240 Head_Flying_Hours ------ 100 253 000 - 2637 (221 136 0)
|
||||
241 Total_LBAs_Written ------ 100 253 000 - 947297780
|
||||
242 Total_LBAs_Read ------ 100 253 000 - 2128782620
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2819 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 2583 -
|
||||
# 2 Short offline Completed without error 00% 2582 -
|
||||
# 3 Short offline Completed without error 00% 2580 -
|
||||
# 4 Short offline Completed without error 00% 2572 -
|
||||
# 5 Short offline Completed without error 00% 1786 -
|
||||
# 6 Short offline Completed without error 00% 1786 -
|
||||
# 7 Short offline Completed without error 00% 1035 -
|
||||
# 8 Short offline Aborted by host 50% 965 -
|
||||
# 9 Short offline Completed without error 00% 877 -
|
||||
#10 Short offline Completed without error 00% 5 -
|
||||
#11 Short offline Completed without error 00% 5 -
|
||||
#12 Short offline Completed without error 00% 5 -
|
||||
#13 Short offline Completed without error 00% 5 -
|
||||
#14 Short offline Completed without error 00% 5 -
|
||||
#15 Short offline Completed without error 00% 5 -
|
||||
#16 Short offline Completed without error 00% 5 -
|
||||
#17 Short offline Completed without error 00% 5 -
|
||||
#18 Short offline Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 42 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/42 Celsius
|
||||
Lifetime Min/Max Temperature: 9/57 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 14/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (4)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
325
HDD/Seagate/ST9160/ST9160412AS/6CF80F13A8F8
Normal file
325
HDD/Seagate/ST9160/ST9160412AS/6CF80F13A8F8
Normal file
@@ -0,0 +1,325 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 7200.4
|
||||
Device Model: ST9160412AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: 0003LVM1
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s)
|
||||
Local Time is: Sat Sep 17 13:04:38 2022 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x73) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 42) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x103b) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 118 099 034 - 169251466
|
||||
3 Spin_Up_Time PO---- 099 099 000 - 0
|
||||
4 Start_Stop_Count -O--CK 099 099 020 - 1501
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 072 060 030 - 17245995113
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 4721 (201 48 0)
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 020 - 1465
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 190
|
||||
188 Command_Timeout -O--CK 100 099 000 - 4295032842
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 071 045 045 Past 29 (Min/Max 18/31)
|
||||
191 G-Sense_Error_Rate -O--CK 096 096 000 - 8577
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1913
|
||||
193 Load_Cycle_Count -O--CK 057 057 000 - 87397
|
||||
194 Temperature_Celsius -O---K 029 055 000 - 29 (0 11 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 064 060 000 - 169251466
|
||||
196 Reallocated_Event_Count POSR-- 096 096 030 - 4137 (3314 0)
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 65 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2864 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 174 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 174 [13] occurred at disk power-on lifetime: 1166 hours (48 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 01 00 00 05 fc 00 8a 2f e0 00 19:06:57.329 READ DMA EXT
|
||||
35 00 00 00 48 00 00 2a 00 1a 57 e0 00 19:06:57.174 WRITE DMA EXT
|
||||
25 00 00 00 48 00 00 8c 00 5b 6f e0 00 19:06:57.164 READ DMA EXT
|
||||
35 00 00 00 58 00 00 29 00 1a ff e0 00 19:06:57.161 WRITE DMA EXT
|
||||
25 00 00 00 58 00 04 9b 00 02 ff e0 00 19:06:57.144 READ DMA EXT
|
||||
|
||||
Error 173 [12] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: WP at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 00 00 5e 47 40 00 1d+01:06:11.854 WRITE FPDMA QUEUED
|
||||
61 00 00 00 01 00 00 cb 00 13 ff 40 00 1d+01:06:11.853 WRITE FPDMA QUEUED
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:11.852 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 00 1d+01:06:11.822 FLUSH CACHE EXT
|
||||
61 00 00 00 08 00 00 00 00 5e 3f 40 00 1d+01:06:11.821 WRITE FPDMA QUEUED
|
||||
|
||||
Error 172 [11] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:08.734 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+01:06:08.214 READ LOG EXT
|
||||
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+01:06:05.364 READ FPDMA QUEUED
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:05.364 READ FPDMA QUEUED
|
||||
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+01:06:05.354 WRITE FPDMA QUEUED
|
||||
|
||||
Error 171 [10] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+01:06:05.364 READ FPDMA QUEUED
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:06:05.364 READ FPDMA QUEUED
|
||||
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+01:06:05.354 WRITE FPDMA QUEUED
|
||||
ef 00 10 00 03 00 00 00 00 00 00 40 00 1d+01:06:05.353 SET FEATURES [Enable SATA feature]
|
||||
ef 00 03 00 45 00 00 00 00 00 00 40 00 1d+01:06:05.353 SET FEATURES [Set transfer mode]
|
||||
|
||||
Error 170 [9] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+01:05:44.972 READ FPDMA QUEUED
|
||||
61 00 00 00 80 00 05 4c 00 d0 c7 40 00 1d+01:05:44.971 WRITE FPDMA QUEUED
|
||||
60 00 00 00 80 00 0f c1 00 95 8f 40 00 1d+01:05:44.969 READ FPDMA QUEUED
|
||||
61 00 00 00 80 00 05 4c 00 d0 47 40 00 1d+01:05:44.968 WRITE FPDMA QUEUED
|
||||
60 00 00 00 80 00 0f c1 00 95 0f 40 00 1d+01:05:44.967 READ FPDMA QUEUED
|
||||
|
||||
Error 169 [8] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:45.282 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 00 1d+00:25:45.096 FLUSH CACHE EXT
|
||||
61 00 00 00 08 00 00 00 00 5e 47 40 00 1d+00:25:45.096 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 10 fc 00 9e 1f 40 00 1d+00:25:45.095 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 00 1d+00:25:45.039 FLUSH CACHE EXT
|
||||
|
||||
Error 168 [7] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:42.126 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:41.626 READ LOG EXT
|
||||
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+00:25:38.740 READ FPDMA QUEUED
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:38.740 READ FPDMA QUEUED
|
||||
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+00:25:38.730 WRITE FPDMA QUEUED
|
||||
|
||||
Error 167 [6] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 05 fc 00 8a 78 00 00 Error: UNC at LBA = 0x5fc008a78 = 25702730360
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 01 00 00 00 00 00 00 40 00 1d+00:25:38.740 READ FPDMA QUEUED
|
||||
60 00 00 00 80 00 05 fc 00 8a 2f 40 00 1d+00:25:38.740 READ FPDMA QUEUED
|
||||
61 00 00 00 01 00 00 cb 00 13 e7 40 00 1d+00:25:38.730 WRITE FPDMA QUEUED
|
||||
ef 00 10 00 03 00 00 00 00 00 00 40 00 1d+00:25:38.730 SET FEATURES [Enable SATA feature]
|
||||
ef 00 03 00 45 00 00 00 00 00 00 40 00 1d+00:25:38.730 SET FEATURES [Set transfer mode]
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1244 -
|
||||
# 2 Vendor (0x50) Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 29 Celsius
|
||||
Power Cycle Min/Max Temperature: 18/31 Celsius
|
||||
Lifetime Min/Max Temperature: 11/55 Celsius
|
||||
Under/Over Temperature Limit Count: 0/21
|
||||
Vendor specific:
|
||||
00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 10 minutes
|
||||
Temperature Logging Interval: 11 minutes
|
||||
Min/Max recommended Temperature: 0/ 0 Celsius
|
||||
Min/Max Temperature Limit: 0/ 0 Celsius
|
||||
Temperature History Size (Index): 128 (22)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 29 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
260
HDD/Seagate/ST9160/ST9160821AS/18D9D97705B9
Normal file
260
HDD/Seagate/ST9160/ST9160821AS/18D9D97705B9
Normal file
@@ -0,0 +1,260 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RC3 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 5400.3
|
||||
Device Model: ST9160821AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.ALC
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Sun May 8 15:06:23 2022 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 24) The self-test routine was aborted by
|
||||
the host.
|
||||
Total time to complete Offline
|
||||
data collection: ( 426) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 111) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 118 093 006 - 188213950
|
||||
3 Spin_Up_Time PO---- 099 099 000 - 0
|
||||
4 Start_Stop_Count -O--CK 094 094 020 - 6396
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1
|
||||
7 Seek_Error_Rate POSR-- 072 060 030 - 327415158068
|
||||
9 Power_On_Hours -O--CK 075 075 000 - 22686
|
||||
10 Spin_Retry_Count PO--C- 100 100 034 - 0
|
||||
12 Power_Cycle_Count -O--CK 094 094 020 - 6540
|
||||
187 Reported_Uncorrect -O--CK 087 087 000 - 13
|
||||
189 High_Fly_Writes -O-RCK 084 084 000 - 16
|
||||
190 Airflow_Temperature_Cel -O---K 061 040 045 Past 39 (Min/Max 38/42)
|
||||
192 Power-Off_Retract_Count -O--CK 099 099 000 - 2798
|
||||
193 Load_Cycle_Count -O--CK 001 001 000 - 590568
|
||||
194 Temperature_Celsius -O---K 039 060 000 - 39 (0 13 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 085 054 000 - 202394141
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 SL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 SL R/O 1 NCQ Command Error log
|
||||
0x11 SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 SL R/O 1 Write stream error log
|
||||
0x22 SL R/O 1 Read stream error log
|
||||
0x23 SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xa0 SL VS 1 Device vendor specific log
|
||||
0xa1 SL VS 20 Device vendor specific log
|
||||
0xa2 SL VS 101 Device vendor specific log
|
||||
0xa8 SL VS 20 Device vendor specific log
|
||||
0xa9 SL VS 1 Device vendor specific log
|
||||
0xe0 SL R/W 1 SCT Command/Status
|
||||
0xe1 SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 13 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 13 occurred at disk power-on lifetime: 10983 hours (457 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 6c 52 94 e0 Error: UNC at LBA = 0x0094526c = 9720428
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 08 65 52 94 e0 00 00:01:11.661 READ DMA EXT
|
||||
35 00 00 60 72 be e0 00 00:01:11.660 WRITE DMA EXT
|
||||
35 00 00 60 71 be e0 00 00:01:11.658 WRITE DMA EXT
|
||||
35 00 00 60 70 be e0 00 00:01:11.657 WRITE DMA EXT
|
||||
35 00 00 60 6f be e0 00 00:01:11.656 WRITE DMA EXT
|
||||
|
||||
Error 12 occurred at disk power-on lifetime: 10983 hours (457 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 6c 52 94 e0 Error: UNC at LBA = 0x0094526c = 9720428
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 08 65 52 94 e0 00 00:01:09.356 READ DMA EXT
|
||||
25 00 08 6d 52 94 e0 00 00:01:09.355 READ DMA EXT
|
||||
35 00 00 60 6a be e0 00 00:01:09.354 WRITE DMA EXT
|
||||
35 00 00 60 69 be e0 00 00:01:09.352 WRITE DMA EXT
|
||||
35 00 00 60 68 be e0 00 00:01:09.351 WRITE DMA EXT
|
||||
|
||||
Error 11 occurred at disk power-on lifetime: 10983 hours (457 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 6c 52 94 e0 Error: UNC at LBA = 0x0094526c = 9720428
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 08 65 52 94 e0 00 00:01:07.070 READ DMA EXT
|
||||
35 00 00 60 62 be e0 00 00:01:07.069 WRITE DMA EXT
|
||||
35 00 00 60 61 be e0 00 00:01:07.068 WRITE DMA EXT
|
||||
35 00 00 60 60 be e0 00 00:01:07.067 WRITE DMA EXT
|
||||
35 00 00 60 5f be e0 00 00:01:07.067 WRITE DMA EXT
|
||||
|
||||
Error 10 occurred at disk power-on lifetime: 10983 hours (457 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 6c 52 94 e0 Error: UNC at LBA = 0x0094526c = 9720428
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 08 65 52 94 e0 00 00:01:04.784 READ DMA EXT
|
||||
25 00 08 5d 52 94 e0 00 00:01:04.783 READ DMA EXT
|
||||
35 00 00 60 5a be e0 00 00:01:04.783 WRITE DMA EXT
|
||||
35 00 00 60 59 be e0 00 00:01:04.782 WRITE DMA EXT
|
||||
35 00 00 60 58 be e0 00 00:01:04.686 WRITE DMA EXT
|
||||
|
||||
Error 9 occurred at disk power-on lifetime: 10983 hours (457 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 6c 52 94 e0 Error: UNC at LBA = 0x0094526c = 9720428
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 80 0d 52 94 e0 00 00:01:01.847 READ DMA EXT
|
||||
25 00 08 8d 51 94 e0 00 00:01:01.846 READ DMA EXT
|
||||
35 00 00 60 0a be e0 00 00:01:01.846 WRITE DMA EXT
|
||||
35 00 00 60 09 be e0 00 00:01:01.846 WRITE DMA EXT
|
||||
35 00 00 60 08 be e0 00 00:01:01.868 WRITE DMA EXT
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Aborted by host 80% 15162 -
|
||||
# 2 Short offline Aborted by host 80% 15162 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 521 (0x0209)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 39 Celsius
|
||||
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
||||
Lifetime Min/Max Temperature: --/ 0 Celsius
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x8002 2 0 Vendor specific
|
||||
0x8003 2 3 Vendor specific
|
||||
0x8004 2 0 Vendor specific
|
||||
|
||||
162
HDD/Seagate/ST9160/ST9160821AS/2619AEA490FE
Normal file
162
HDD/Seagate/ST9160/ST9160821AS/2619AEA490FE
Normal file
@@ -0,0 +1,162 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 5400.3
|
||||
Device Model: ST9160821AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.ALC
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Fri Sep 9 20:01:19 2022 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 426) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 111) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 111 095 006 - 33371779
|
||||
3 Spin_Up_Time PO---- 099 099 000 - 0
|
||||
4 Start_Stop_Count -O--CK 094 094 020 - 6862
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 084 060 030 - 4567590956
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 5094
|
||||
10 Spin_Retry_Count PO--C- 100 100 034 - 0
|
||||
12 Power_Cycle_Count -O--CK 096 096 020 - 4831
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 084 084 000 - 16
|
||||
190 Airflow_Temperature_Cel -O---K 064 046 045 - 36 (Min/Max 35/36)
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1279
|
||||
193 Load_Cycle_Count -O--CK 043 043 000 - 115050
|
||||
194 Temperature_Celsius -O---K 036 054 000 - 36 (0 4 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 075 055 000 - 39033687
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 SL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 SL R/O 1 NCQ Command Error log
|
||||
0x11 SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 SL R/O 1 Write stream error log
|
||||
0x22 SL R/O 1 Read stream error log
|
||||
0x23 SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xa0 SL VS 1 Device vendor specific log
|
||||
0xa1 SL VS 20 Device vendor specific log
|
||||
0xa2 SL VS 101 Device vendor specific log
|
||||
0xa8 SL VS 20 Device vendor specific log
|
||||
0xa9 SL VS 1 Device vendor specific log
|
||||
0xe0 SL R/W 1 SCT Command/Status
|
||||
0xe1 SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 5090 -
|
||||
# 2 Short offline Completed: read failure 70% 4953 839745
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 521 (0x0209)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 36 Celsius
|
||||
Power Cycle Min/Max Temperature: --/ 0 Celsius
|
||||
Lifetime Min/Max Temperature: --/ 0 Celsius
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x8002 2 0 Vendor specific
|
||||
0x8003 2 0 Vendor specific
|
||||
0x8004 2 0 Vendor specific
|
||||
|
||||
Reference in New Issue
Block a user