mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
328
HDD/Toshiba/MK5076/MK5076GSX/2BDC506234B5
Normal file
328
HDD/Toshiba/MK5076/MK5076GSX/2BDC506234B5
Normal file
@@ -0,0 +1,328 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba 2.5" HDD MK..76GSX
|
||||
Device Model: TOSHIBA MK5076GSX
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000039 ...
|
||||
Firmware Version: GS001C
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Sep 23 22:46:02 2022 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 165) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
|
||||
2 Throughput_Performance POS--K 100 100 050 - 0
|
||||
3 Spin_Up_Time PO---K 100 100 002 - 2071
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 5009
|
||||
5 Reallocated_Sector_Ct PO--CK 099 099 010 - 37
|
||||
7 Seek_Error_Rate POSR-K 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 050 - 0
|
||||
9 Power_On_Minutes -O--CK 062 062 000 - 254h+44m
|
||||
10 Spin_Retry_Count PO--CK 199 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 4992
|
||||
183 Runtime_Bad_Block -O--CK 100 100 001 - 1
|
||||
184 End-to-End_Error PO--CK 100 100 097 - 0
|
||||
185 Unknown_Attribute -O--CK 100 100 001 - 65535
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 786
|
||||
188 Command_Timeout -O--CK 100 099 000 - 19
|
||||
189 High_Fly_Writes -O-RCK 100 100 001 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 056 028 040 Past 44 (Min/Max 39/46 #2044)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 776
|
||||
192 Power-Off_Retract_Count -O---K 099 099 000 - 53216044
|
||||
193 Load_Cycle_Count -O--CK 093 093 000 - 74047
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 14
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 786 (device log contains only the most recent 256 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 786 [17] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 4a 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 48 00 00 07 61 7c e0 40 00 00:44:10.025 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:44:10.024 READ LOG EXT
|
||||
60 00 30 00 38 00 00 07 61 7c e0 40 00 00:44:05.513 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:44:05.513 READ LOG EXT
|
||||
60 00 30 00 28 00 00 07 61 7c e0 40 00 00:44:00.947 READ FPDMA QUEUED
|
||||
|
||||
Error 785 [16] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 3a 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 38 00 00 07 61 7c e0 40 00 00:44:05.513 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:44:05.513 READ LOG EXT
|
||||
60 00 30 00 28 00 00 07 61 7c e0 40 00 00:44:00.947 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:44:00.946 READ LOG EXT
|
||||
60 00 30 00 18 00 00 07 61 7c e0 40 00 00:43:56.791 READ FPDMA QUEUED
|
||||
|
||||
Error 784 [15] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 2a 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 28 00 00 07 61 7c e0 40 00 00:44:00.947 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:44:00.946 READ LOG EXT
|
||||
60 00 30 00 18 00 00 07 61 7c e0 40 00 00:43:56.791 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:56.791 READ LOG EXT
|
||||
60 00 30 00 08 00 00 07 61 7c e0 40 00 00:43:52.691 READ FPDMA QUEUED
|
||||
|
||||
Error 783 [14] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 1a 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 18 00 00 07 61 7c e0 40 00 00:43:56.791 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:56.791 READ LOG EXT
|
||||
60 00 30 00 08 00 00 07 61 7c e0 40 00 00:43:52.691 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:52.691 READ LOG EXT
|
||||
60 00 30 00 f8 00 00 07 61 7c e0 40 00 00:43:48.247 READ FPDMA QUEUED
|
||||
|
||||
Error 782 [13] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 0a 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 08 00 00 07 61 7c e0 40 00 00:43:52.691 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:52.691 READ LOG EXT
|
||||
60 00 30 00 f8 00 00 07 61 7c e0 40 00 00:43:48.247 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:48.246 READ LOG EXT
|
||||
60 00 30 00 e8 00 00 07 61 7c e0 40 00 00:43:43.619 READ FPDMA QUEUED
|
||||
|
||||
Error 781 [12] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 fa 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 f8 00 00 07 61 7c e0 40 00 00:43:48.247 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:48.246 READ LOG EXT
|
||||
60 00 30 00 e8 00 00 07 61 7c e0 40 00 00:43:43.619 READ FPDMA QUEUED
|
||||
60 00 40 00 e0 00 00 00 14 03 cc 40 00 00:43:43.610 READ FPDMA QUEUED
|
||||
60 00 10 00 d8 00 00 00 0b 7f aa 40 00 00:43:43.599 READ FPDMA QUEUED
|
||||
|
||||
Error 780 [11] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 ea 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 e8 00 00 07 61 7c e0 40 00 00:43:43.619 READ FPDMA QUEUED
|
||||
60 00 40 00 e0 00 00 00 14 03 cc 40 00 00:43:43.610 READ FPDMA QUEUED
|
||||
60 00 10 00 d8 00 00 00 0b 7f aa 40 00 00:43:43.599 READ FPDMA QUEUED
|
||||
60 00 02 00 d0 00 00 00 0b db 55 40 00 00:43:43.589 READ FPDMA QUEUED
|
||||
60 00 08 00 c8 00 00 01 70 34 b8 40 00 00:43:43.575 READ FPDMA QUEUED
|
||||
|
||||
Error 779 [10] occurred at disk power-on lifetime: 7942 hours (330 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 da 00 00 07 61 7c e6 67 00 Error: UNC at LBA = 0x07617ce6 = 123829478
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 30 00 d8 00 00 07 61 7c e0 40 00 00:43:35.835 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:35.835 READ LOG EXT
|
||||
60 00 30 00 c8 00 00 07 61 7c e0 40 00 00:43:31.235 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:43:31.235 READ LOG EXT
|
||||
60 00 30 00 b8 00 00 07 61 7c e0 40 00 00:43:27.046 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3 -
|
||||
# 2 Extended offline Interrupted (host reset) 90% 3 -
|
||||
# 3 Extended offline Aborted by host 90% 3 -
|
||||
# 4 Short offline Completed without error 00% 2 -
|
||||
# 5 Extended offline Interrupted (host reset) 90% 2 -
|
||||
# 6 Extended offline Aborted by host 90% 2 -
|
||||
# 7 Short offline Completed without error 00% 1 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 44 Celsius
|
||||
Power Cycle Min/Max Temperature: 39/46 Celsius
|
||||
Lifetime Min/Max Temperature: 15/72 Celsius
|
||||
Under/Over Temperature Limit Count: 0/2044
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: 0/60 Celsius
|
||||
Temperature History Size (Index): 478 (13)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 17 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
Reference in New Issue
Block a user