mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
395
HDD/WDC/WD10/WD10EZEX-60WN4A1/3D3D7A83B84A
Normal file
395
HDD/WDC/WD10/WD10EZEX-60WN4A1/3D3D7A83B84A
Normal file
@@ -0,0 +1,395 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Western Digital Blue
|
||||
Device Model: WDC WD10EZEX-60WN4A1
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0014ee ...
|
||||
Firmware Version: 03.01A03
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 3.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Nov 8 15:03:07 2022 EET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (11220) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 116) minutes.
|
||||
SCT capabilities: (0x303d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
||||
3 Spin_Up_Time POS--K 176 168 021 - 2166
|
||||
4 Start_Stop_Count -O--CK 093 093 000 - 7024
|
||||
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
||||
7 Seek_Error_Rate POSR-K 200 200 051 - 0
|
||||
9 Power_On_Hours -O--CK 080 080 000 - 15063
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 098 098 000 - 2181
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 097 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 076 000 - 27
|
||||
188 Command_Timeout -O--CK 100 056 000 - 193276477485
|
||||
190 Airflow_Temperature_Cel -O---K 067 053 040 - 33 (Min/Max 23/34)
|
||||
192 Power-Off_Retract_Count -O--CK 200 200 000 - 375
|
||||
193 Load_Cycle_Count -O--CK 192 192 000 - 24771
|
||||
194 Temperature_Celsius -O---K 110 096 000 - 33
|
||||
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x08 GPL R/O 2 Power Conditions log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0d GPL,SL R/O 8 LPS Mis-alignment log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
||||
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
|
||||
0xb6 GPL VS 1181 Device vendor specific log
|
||||
0xb6 SL VS 1 Device vendor specific log
|
||||
0xb7 GPL,SL VS 48 Device vendor specific log
|
||||
0xbd GPL,SL VS 1 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xc1 GPL VS 93 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
||||
Device Error Count: 67 (device log contains only the most recent 24 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 67 [18] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 a0 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:25.204 FLUSH CACHE EXT
|
||||
61 00 10 00 90 00 00 00 5d 1f a0 40 00 00:32:25.204 WRITE FPDMA QUEUED
|
||||
61 00 08 00 88 00 00 00 5d 1f 18 40 00 00:32:25.203 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:16.719 FLUSH CACHE EXT
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:16.719 READ LOG EXT
|
||||
|
||||
Error 66 [17] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 a0 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:16.719 FLUSH CACHE EXT
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:16.719 READ LOG EXT
|
||||
61 00 08 00 78 00 00 00 5d 1f 20 40 00 00:32:08.236 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:07.239 READ LOG EXT
|
||||
61 00 08 00 70 00 00 00 5d 1f 20 40 00 00:31:58.755 WRITE FPDMA QUEUED
|
||||
|
||||
Error 65 [16] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 78 00 00 00 5d 1f 20 40 00 00:32:08.236 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:32:07.239 READ LOG EXT
|
||||
61 00 08 00 70 00 00 00 5d 1f 20 40 00 00:31:58.755 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:57.751 READ LOG EXT
|
||||
61 00 08 00 68 00 00 00 5d 1f 20 40 00 00:31:49.268 WRITE FPDMA QUEUED
|
||||
|
||||
Error 64 [15] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 70 00 00 00 5d 1f 20 40 00 00:31:58.755 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:57.751 READ LOG EXT
|
||||
61 00 08 00 68 00 00 00 5d 1f 20 40 00 00:31:49.268 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:48.269 READ LOG EXT
|
||||
61 00 08 00 60 00 00 00 5d 1f 20 40 00 00:31:39.785 WRITE FPDMA QUEUED
|
||||
|
||||
Error 63 [14] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 68 00 00 00 5d 1f 20 40 00 00:31:49.268 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:48.269 READ LOG EXT
|
||||
61 00 08 00 60 00 00 00 5d 1f 20 40 00 00:31:39.785 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:38.789 READ LOG EXT
|
||||
61 00 08 00 58 00 00 00 5d 1f 20 40 00 00:31:30.306 WRITE FPDMA QUEUED
|
||||
|
||||
Error 62 [13] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 60 00 00 00 5d 1f 20 40 00 00:31:39.785 WRITE FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:31:38.789 READ LOG EXT
|
||||
61 00 08 00 58 00 00 00 5d 1f 20 40 00 00:31:30.306 WRITE FPDMA QUEUED
|
||||
61 00 08 00 50 00 00 00 63 bc 48 40 00 00:31:28.954 WRITE FPDMA QUEUED
|
||||
61 00 08 00 48 00 00 00 60 08 50 40 00 00:31:21.742 WRITE FPDMA QUEUED
|
||||
|
||||
Error 61 [12] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 5d 1f 20 40 00 Error: IDNF at LBA = 0x005d1f20 = 6102816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 08 00 58 00 00 00 5d 1f 20 40 00 00:31:30.306 WRITE FPDMA QUEUED
|
||||
61 00 08 00 50 00 00 00 63 bc 48 40 00 00:31:28.954 WRITE FPDMA QUEUED
|
||||
61 00 08 00 48 00 00 00 60 08 50 40 00 00:31:21.742 WRITE FPDMA QUEUED
|
||||
61 00 08 00 40 00 00 00 5d 1f 10 40 00 00:31:21.213 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:31:12.729 FLUSH CACHE EXT
|
||||
|
||||
Error 60 [11] occurred at disk power-on lifetime: 12808 hours (533 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 a0 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:31:12.729 FLUSH CACHE EXT
|
||||
61 00 08 00 30 00 00 00 5d 1f a0 40 00 00:31:12.729 WRITE FPDMA QUEUED
|
||||
61 00 28 00 28 00 00 00 5d 22 58 40 00 00:31:12.729 WRITE FPDMA QUEUED
|
||||
61 00 08 00 20 00 00 00 00 09 20 40 00 00:31:09.480 WRITE FPDMA QUEUED
|
||||
61 00 08 00 18 00 00 1a 46 49 e8 40 00 00:31:09.480 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 13988 -
|
||||
# 2 Short offline Completed without error 00% 12863 -
|
||||
# 3 Short offline Completed without error 00% 12861 -
|
||||
# 4 Short offline Completed without error 00% 11430 -
|
||||
# 5 Short offline Completed without error 00% 11414 -
|
||||
# 6 Short offline Completed without error 00% 11400 -
|
||||
# 7 Short offline Completed without error 00% 8687 -
|
||||
# 8 Short offline Completed without error 00% 8671 -
|
||||
# 9 Short offline Completed without error 00% 8647 -
|
||||
#10 Short offline Completed without error 00% 8629 -
|
||||
#11 Short offline Completed without error 00% 8613 -
|
||||
#12 Short offline Completed without error 00% 8601 -
|
||||
#13 Short offline Completed without error 00% 8585 -
|
||||
#14 Short offline Completed without error 00% 8583 -
|
||||
#15 Short offline Completed without error 00% 8566 -
|
||||
#16 Short offline Completed without error 00% 8553 -
|
||||
#17 Short offline Completed without error 00% 8546 -
|
||||
#18 Short offline Completed without error 00% 8526 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 258 (0x0102)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 23/34 Celsius
|
||||
Lifetime Min/Max Temperature: 22/47 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
Vendor specific:
|
||||
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: -41/85 Celsius
|
||||
Temperature History Size (Index): 128 (15)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 85 (8.5 seconds)
|
||||
Write: 85 (8.5 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 2181 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 15063 --- Power-on Hours
|
||||
0x01 0x018 6 16244838966 --- Logical Sectors Written
|
||||
0x01 0x020 6 71380612 --- Number of Write Commands
|
||||
0x01 0x028 6 10890799906 --- Logical Sectors Read
|
||||
0x01 0x030 6 81995655 --- Number of Read Commands
|
||||
0x01 0x038 6 2687192448 --- Date and Time TimeStamp
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 10831 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 4284 --- Head Flying Hours
|
||||
0x03 0x018 4 25147 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
||||
0x03 0x040 4 375 --- Number of High Priority Unload Events
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 27 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 2949165 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 31 --- Average Short Term Temperature
|
||||
0x05 0x018 1 34 --- Average Long Term Temperature
|
||||
0x05 0x020 1 47 --- Highest Temperature
|
||||
0x05 0x028 1 20 --- Lowest Temperature
|
||||
0x05 0x030 1 39 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 22 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 36 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 25 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 24514 --- Number of Hardware Resets
|
||||
0x06 0x010 4 18604 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x8000 4 48220 Vendor specific
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user