Update of reports (new: 3633, modified: 0)

SSD/BHT/WR202/WR202I0064G E70215F5/2CB3E547382D

@@ -0,0 +1,108 @@
+smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
+Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
+
+=== START OF INFORMATION SECTION ===
+Device Model:     BHT WR202I0064G E70215F5
+Serial Number:    --
+Firmware Version: 150100
+User Capacity:    62,537,072,640 bytes [62.5 GB]
+Sector Size:      512 bytes logical/physical
+Rotation Rate:    Solid State Device
+TRIM Command:     Available, deterministic
+Device is:        Not in smartctl database 7.3/5319
+ATA Version is:   ACS-2, ATA/ATAPI-7 T13/1532D revision 1
+SATA Version is:  SATA 2.6, 3.0 Gb/s
+Local Time is:    Sun Jan 29 10:05:52 2023 CET
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+AAM feature is:   Unavailable
+APM feature is:   Unavailable
+Rd look-ahead is: Unavailable
+Write cache is:   Enabled
+DSN feature is:   Unavailable
+ATA Security is:  Disabled, frozen [SEC2]
+Wt Cache Reorder: Unavailable
+
+=== START OF READ SMART DATA SECTION ===
+SMART overall-health self-assessment test result: PASSED
+
+General SMART Values:
+Offline data collection status:  (0x00)	Offline data collection activity
+					was never started.
+					Auto Offline Data Collection: Disabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever 
+					been run.
+Total time to complete Offline 
+data collection: 		( 1115) seconds.
+Offline data collection
+capabilities: 			 (0x1d) SMART execute Offline immediate.
+					No Auto Offline data collection support.
+					Abort Offline collection upon new
+					command.
+					Offline surface scan supported.
+					Self-test supported.
+					No Conveyance Self-test supported.
+					No Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					No General Purpose Logging support.
+Short self-test routine 
+recommended polling time: 	 (   2) minutes.
+Extended self-test routine
+recommended polling time: 	 (  18) minutes.
+
+SMART Attributes Data Structure revision number: 10
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
+  9 Power_On_Hours          -O--CK   100   100   000    -    177
+ 12 Power_Cycle_Count       -O--CK   100   100   000    -    19
+173 Unknown_Attribute       -O--CK   100   100   000    -    0
+188 Command_Timeout         -O--CK   100   100   000    -    94
+194 Temperature_Celsius     -O---K   100   120   000    -    32
+199 UDMA_CRC_Error_Count    PO--CK   100   100   000    -    0
+241 Total_LBAs_Written      -O--CK   100   100   000    -    131
+242 Total_LBAs_Read         -O--CK   100   100   000    -    33
+234 Unknown_Attribute       -O--CK   100   100   000    -    0
+235 Unknown_Attribute       -O--CK   100   100   000    -    0
+236 Unknown_Attribute       -O--CK   100   100   000    -    0
+237 Unknown_Attribute       -O--CK   100   100   000    -    0
+243 Unknown_Attribute       -O--CK   100   100   000    -    0
+244 Unknown_Attribute       -O--CK   100   100   000    -    0
+245 Unknown_Attribute       -O--CK   100   100   000    -    0
+246 Unknown_Attribute       -O--CK   100   100   000    -    0
+247 Unknown_Attribute       -O--CK   100   100   000    -    1028
+248 Unknown_Attribute       -O--CK   100   100   000    -    1
+                            ||||||_ K auto-keep
+                            |||||__ C event count
+                            ||||___ R error rate
+                            |||____ S speed/performance
+                            ||_____ O updated online
+                            |______ P prefailure warning
+
+Read SMART Log Directory failed: Input/output error
+
+General Purpose Log Directory not supported
+
+SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
+
+SMART Error Log Version: 1
+No Errors Logged
+
+SMART Extended Self-test Log (GP Log 0x07) not supported
+
+SMART Self-test log structure revision number 1
+No self-tests have been logged.  [To run self-tests, use: smartctl -t]
+
+Selective Self-tests/Logging not supported
+
+SCT Commands not supported
+
+Device Statistics (GP/SMART Log 0x04) not supported
+
+Pending Defects log (GP Log 0x0c) not supported
+
+SATA Phy Event Counters (GP Log 0x11) not supported
+