mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
277
SSD/Ramsta/SSD S800/SSD S800 120GB/668F6C8CC89E
Normal file
277
SSD/Ramsta/SSD S800/SSD S800 120GB/668F6C8CC89E
Normal file
@@ -0,0 +1,277 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: Ramsta SSD S800 120GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: RY2DV0
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jan 7 21:40:03 2023 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5d) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 6610
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 99
|
||||
160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0
|
||||
161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 0
|
||||
163 Initial_Bad_Block_Count -O--CK 100 100 050 - 2356
|
||||
164 Total_Erase_Count -O--CK 100 100 050 - 111
|
||||
165 Max_Erase_Count -O--CK 100 100 050 - 158
|
||||
166 Min_Erase_Count -O--CK 100 100 050 - 0
|
||||
167 Average_Erase_Count -O--CK 100 100 050 - 73
|
||||
168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 0
|
||||
169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 100663296
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 8872
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 3384
|
||||
178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 3
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 61
|
||||
194 Temperature_Celsius -O--CK 100 100 050 - 42
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 0
|
||||
241 Host_Writes_32MiB -O--CK 100 100 050 - 87893
|
||||
242 Host_Reads_32MiB -O--CK 100 100 050 - 490
|
||||
249 Unkn_SiliconMotion_Attr -O--CK 100 100 050 - 98980
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 16 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
Device Error Count: 2
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 5832 hours (243 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 00 00 01 00 00 4f 00 c2 e0 51 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 4f 00 c2 e0 00 00 00:00:07.520 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 00 00:00:07.510 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 4f 00 c2 9a 00 00 00:00:07.510 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 00 00:00:07.510 IDENTIFY DEVICE
|
||||
25 00 00 03 b8 00 00 04 00 00 f1 40 00 00:00:04.050 READ DMA EXT
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 5206 hours (216 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 00 00 01 00 00 4f 00 c2 e0 51 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 4f 00 c2 e0 00 00 00:03:44.020 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 00 00:03:44.020 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 4f 00 c2 9a 00 00 00:03:44.010 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 00 00:03:44.010 IDENTIFY DEVICE
|
||||
25 00 00 01 08 00 07 7a 00 d3 38 40 00 00:01:56.720 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Offline Completed without error 00% 5832 -
|
||||
# 2 Offline Self-test routine in progress 10% 5832 -
|
||||
# 3 Offline Self-test routine in progress 10% 5832 -
|
||||
# 4 Offline Self-test routine in progress 10% 5832 -
|
||||
# 5 Offline Self-test routine in progress 10% 5832 -
|
||||
# 6 Offline Self-test routine in progress 10% 5832 -
|
||||
# 7 Offline Self-test routine in progress 10% 5832 -
|
||||
# 8 Offline Self-test routine in progress 10% 5832 -
|
||||
# 9 Offline Self-test routine in progress 10% 5832 -
|
||||
#10 Offline Self-test routine in progress 10% 5832 -
|
||||
#11 Offline Self-test routine in progress 10% 5832 -
|
||||
#12 Offline Self-test routine in progress 10% 5832 -
|
||||
#13 Offline Self-test routine in progress 10% 5832 -
|
||||
#14 Offline Self-test routine in progress 10% 5832 -
|
||||
#15 Offline Self-test routine in progress 10% 5832 -
|
||||
#16 Offline Self-test routine in progress 10% 5832 -
|
||||
#17 Offline Self-test routine in progress 10% 5832 -
|
||||
#18 Offline Self-test routine in progress 10% 5832 -
|
||||
#19 Offline Self-test routine in progress 10% 5832 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 99 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6610 --- Power-on Hours
|
||||
0x01 0x018 6 5760155648 --- Logical Sectors Written
|
||||
0x01 0x020 6 113246941 --- Number of Write Commands
|
||||
0x01 0x028 6 32112640 --- Logical Sectors Read
|
||||
0x01 0x030 6 468981 --- Number of Read Commands
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0009 4 59 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 161 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
Reference in New Issue
Block a user