mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
134
SSD/Smartbuy/SSD/SSD 120GB/5FBAB29B7B36
Normal file
134
SSD/Smartbuy/SSD/SSD 120GB/5FBAB29B7B36
Normal file
@@ -0,0 +1,134 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Phison Driven SSDs
|
||||
Device Model: SSD Smartbuy 120GB
|
||||
Serial Number: --
|
||||
Firmware Version: S8FM08.3
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Jan 31 23:54:48 2023 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 255) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x1b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 10937
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 6541
|
||||
168 SATA_Phy_Error_Count -O--C- 100 100 000 - 2
|
||||
170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/147
|
||||
173 MaxAvgErase_Ct -O--C- 100 100 000 - 228 (Average 188)
|
||||
192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 452
|
||||
194 Temperature_Celsius PO---K 100 100 020 - 30
|
||||
218 CRC_Error_Count PO-R-- 100 100 050 - 25120
|
||||
231 SSD_Life_Left PO--C- 100 100 000 - 93
|
||||
241 Lifetime_Writes_GiB -O--C- 100 100 000 - 12552
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Invalid Error Log index = 0x4e91 (reserved = 0x00)
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
# 2 Short offline Completed without error 00% 212 -
|
||||
# 3 Short offline Completed without error 00% 403 -
|
||||
# 4 Short offline Completed without error 00% 33 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
342
SSD/Smartbuy/SSD/SSD 256GB/B523E1EEFAFC
Normal file
342
SSD/Smartbuy/SSD/SSD 256GB/B523E1EEFAFC
Normal file
@@ -0,0 +1,342 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p13 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: Smartbuy SSD 256GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: H190117D
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Oct 10 15:32:56 2022 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 5386
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 1426
|
||||
167 Unknown_Attribute -O---K 100 100 000 - 0
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 148
|
||||
169 Unknown_Attribute PO--C- 093 093 010 - 15204381
|
||||
171 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
172 Unknown_Attribute -O--CK 000 000 000 - 0
|
||||
173 Unknown_Attribute -O--C- 200 200 000 - 700093431988
|
||||
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
||||
177 Wear_Leveling_Count -O--C- 100 100 000 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 3168
|
||||
187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 499
|
||||
194 Temperature_Celsius -O---K 048 048 000 - 48 (Min/Max 48/48)
|
||||
199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 163
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 210
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 180
|
||||
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 526
|
||||
210 Unknown_Attribute -O--CK 200 200 000 - 1198
|
||||
211 Unknown_Attribute -O--CK 200 200 000 - 943
|
||||
231 Unknown_SSD_Attribute PO---K 088 088 005 - 12
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 31545
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 10182
|
||||
245 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 148
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 148 [147] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:01:31.300 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:01:31.300 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:01:31.300 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:01:31.300 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:01:31.000 SECURITY FREEZE LOCK
|
||||
|
||||
Error 147 [146] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:00:39.400 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:00:39.400 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:00:39.400 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:00:39.400 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:00:39.100 SECURITY FREEZE LOCK
|
||||
|
||||
Error 146 [145] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:00:04.100 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:00:04.100 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:00:04.100 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:00:04.100 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:00:03.800 SECURITY FREEZE LOCK
|
||||
|
||||
Error 145 [144] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:00:17.100 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:00:17.100 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:00:17.100 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:00:17.100 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:00:16.900 SECURITY FREEZE LOCK
|
||||
|
||||
Error 144 [143] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:00:09.500 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:00:09.500 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:00:09.500 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:00:09.500 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:00:09.300 SECURITY FREEZE LOCK
|
||||
|
||||
Error 143 [142] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:02:25.800 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:02:25.800 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:02:25.800 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:02:25.800 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:02:25.500 SECURITY FREEZE LOCK
|
||||
|
||||
Error 142 [141] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:02:07.500 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:02:07.500 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:02:07.500 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:02:07.500 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:02:07.200 SECURITY FREEZE LOCK
|
||||
|
||||
Error 141 [140] occurred at disk power-on lifetime: 5097 hours (212 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 67 01 00 00 02 00 00 00 a0 08
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
70 00 ff 00 00 00 00 00 00 00 00 a0 80 00:00:04.800 SEEK [OBS-7]
|
||||
25 03 da 00 67 00 00 00 00 00 02 40 80 00:00:04.800 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 01 40 80 00:00:04.800 READ DMA EXT
|
||||
25 03 da 00 01 00 00 00 00 00 00 40 80 00:00:04.800 READ DMA EXT
|
||||
f5 00 da 00 01 00 00 00 c2 4f f0 a0 80 00:00:04.500 SECURITY FREEZE LOCK
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3448 -
|
||||
# 2 Short offline Completed without error 00% 3430 -
|
||||
# 3 Short offline Completed without error 00% 3423 -
|
||||
# 4 Short offline Completed without error 00% 3414 -
|
||||
# 5 Short offline Completed without error 00% 2662 -
|
||||
# 6 Extended offline Completed without error 00% 1962 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 48 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/48 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (237)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1426 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5386 --- Power-on Hours
|
||||
0x01 0x018 6 66156024936 --- Logical Sectors Written
|
||||
0x01 0x020 6 178691956 --- Number of Write Commands
|
||||
0x01 0x028 6 21353520428 --- Logical Sectors Read
|
||||
0x01 0x030 6 121423124 --- Number of Read Commands
|
||||
0x01 0x038 6 4962898895796 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 28 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 148 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 28 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user