mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
160
SSD/Team/T/T253512GB/40D59801A1A5
Normal file
160
SSD/Team/T/T253512GB/40D59801A1A5
Normal file
@@ -0,0 +1,160 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM T253512GB
|
||||
Serial Number: --
|
||||
Firmware Version: V0718B0
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Dec 26 19:42:08 2022 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 254 (maximum performance)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 5
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 61
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 5050
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 5
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 23
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 247
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 19
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x24 GPL R/O 88 Current Device Internal Status Data log
|
||||
0x25 GPL R/O 32 Saved Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 0 (0x0000)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 23 Celsius
|
||||
Power Cycle Min/Max Temperature: 23/23 Celsius
|
||||
Lifetime Min/Max Temperature: 21/23 Celsius
|
||||
Specified Max Operating Temperature: 100 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Data Table command not supported
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 5 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 0 --- Power-on Hours
|
||||
0x01 0x018 6 16195773 --- Logical Sectors Written
|
||||
0x01 0x020 6 299923 --- Number of Write Commands
|
||||
0x01 0x028 6 1297551 --- Logical Sectors Read
|
||||
0x01 0x030 6 32689 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 18 Device-to-host register FISes sent due to a COMRESET
|
||||
|
136
SSD/Team/T/T253512GB/69200ADB0558
Normal file
136
SSD/Team/T/T253512GB/69200ADB0558
Normal file
@@ -0,0 +1,136 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM T253512GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 02b2a2 ...
|
||||
Add. Product Id: mavlsata
|
||||
Firmware Version: V4.30.2
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 T13/2161-D revision 4
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jan 7 20:49:01 2023 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x75) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x00) Error logging NOT supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 90) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 5
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
9 Power_On_Hours PO--CK 100 100 010 - 5
|
||||
12 Power_Cycle_Count PO--CK 100 100 010 - 15
|
||||
161 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
164 Unknown_Attribute PO--CK 100 100 010 - 164
|
||||
165 Unknown_Attribute PO--CK 100 100 010 - 1
|
||||
166 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
167 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
169 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0
|
||||
177 Wear_Leveling_Count PO--CK 100 100 010 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
|
||||
192 Power-Off_Retract_Count PO--CK 100 100 010 - 0
|
||||
194 Temperature_Celsius PO--CK 100 100 010 - 48
|
||||
195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0
|
||||
199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0
|
||||
241 Total_LBAs_Written PO--CK 100 100 010 - 20
|
||||
242 Total_LBAs_Read PO--CK 100 100 010 - 1
|
||||
243 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
244 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
245 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
246 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
248 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
249 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0
|
||||
251 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
252 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
253 Unknown_Attribute PO--CK 100 100 010 - 0
|
||||
254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log not supported
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
155
SSD/Team/T253/T253A3512G/14492182BABE
Normal file
155
SSD/Team/T253/T253A3512G/14492182BABE
Normal file
@@ -0,0 +1,155 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM T253A3512G
|
||||
Serial Number: --
|
||||
Firmware Version: SBFM61.5
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Sat Jan 7 20:50:45 2023 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (65535) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x79) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 6) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 6454
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 14
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
170 Unknown_Attribute PO---- 100 100 010 - 287
|
||||
173 Unknown_Attribute -O--C- 100 100 000 - 589837
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 10
|
||||
194 Temperature_Celsius PO---K 067 067 000 - 33
|
||||
218 Unknown_Attribute PO-R-- 100 100 050 - 0
|
||||
231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99
|
||||
241 Total_LBAs_Written -O--C- 100 100 000 - 2575
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 14 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6454 --- Power-on Hours
|
||||
0x01 0x018 6 5400167506 --- Logical Sectors Written
|
||||
0x01 0x028 6 46183123 --- Logical Sectors Read
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x020 1 33 --- Highest Temperature
|
||||
0x05 0x028 1 33 --- Lowest Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 49 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
147
SSD/Team/T253/T253X2256G/9015FC7E9989
Normal file
147
SSD/Team/T253/T253X2256G/9015FC7E9989
Normal file
@@ -0,0 +1,147 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM T253X2256G
|
||||
Serial Number: --
|
||||
Firmware Version: S0920A0
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Dec 26 14:25:25 2022 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 3323
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 164
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 9
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 132736
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 286
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 1
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 93
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 5050
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 99
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 84
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 0
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 157666
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 20337
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 184086
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 164 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3323 --- Power-on Hours
|
||||
0x01 0x018 6 1742925877 --- Logical Sectors Written
|
||||
0x01 0x020 6 67574187 --- Number of Write Commands
|
||||
0x01 0x028 6 1332848176 --- Logical Sectors Read
|
||||
0x01 0x030 6 1252114 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
158
SSD/Team/T253/T253X5480G/4F606F9FFCC5
Normal file
158
SSD/Team/T253/T253X5480G/4F606F9FFCC5
Normal file
@@ -0,0 +1,158 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM T253X5480G
|
||||
Serial Number: --
|
||||
Firmware Version: SBFMP1.5
|
||||
User Capacity: 480,103,981,056 bytes [480 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Wed Feb 8 19:05:27 2023 +04
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (65535) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x79) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 6) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 8989
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 87
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
170 Unknown_Attribute PO---- 100 100 010 - 138
|
||||
173 Unknown_Attribute -O--C- 100 100 000 - 3276880
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 52
|
||||
194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33)
|
||||
218 Unknown_Attribute PO-R-- 100 100 050 - 0
|
||||
231 Unknown_SSD_Attribute PO--C- 100 100 000 - 95
|
||||
241 Total_LBAs_Written -O--C- 100 100 000 - 11134
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 87 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 8989 --- Power-on Hours
|
||||
0x01 0x018 6 23350866887 --- Logical Sectors Written
|
||||
0x01 0x028 6 21987492809 --- Logical Sectors Read
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x020 1 33 --- Highest Temperature
|
||||
0x05 0x028 1 33 --- Lowest Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 4721 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 5 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 172 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 170 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
183
SSD/Team/T2535/T2535T240G/D4E1C2CC53D5
Normal file
183
SSD/Team/T2535/T2535T240G/D4E1C2CC53D5
Normal file
@@ -0,0 +1,183 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM T2535T240G
|
||||
Serial Number: --
|
||||
Firmware Version: R0412A0
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database [for details use: -P showall]
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Jun 19 21:10:36 2022 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 12467
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 3139
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 72
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 787914
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 5479
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 139
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 560
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 5050
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 89
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 561
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 0
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 1039742
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 770511
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 1023962
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
Device Error Count: 22 (device log contains only the most recent 4 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 22 [1] log entry is empty
|
||||
Error 21 [0] log entry is empty
|
||||
Error 20 [3] log entry is empty
|
||||
Error 19 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
|
||||
2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT
|
||||
2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT
|
||||
b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG
|
||||
b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3557 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3139 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 12467 --- Power-on Hours
|
||||
0x01 0x018 6 3716039580 --- Logical Sectors Written
|
||||
0x01 0x020 6 30613 --- Number of Write Commands
|
||||
0x01 0x028 6 3251572705 --- Logical Sectors Read
|
||||
0x01 0x030 6 25516 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 11 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 38 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
141
SSD/Team/TEAML5/TEAML5Lite3D120G/A424FD6B5B86
Normal file
141
SSD/Team/TEAML5/TEAML5Lite3D120G/A424FD6B5B86
Normal file
@@ -0,0 +1,141 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.2 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Silicon Motion based SSDs
|
||||
Device Model: TEAML5Lite3D120G
|
||||
Serial Number: --
|
||||
Firmware Version: Q0410A
|
||||
User Capacity: 120,034,123,776 bytes [120 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Sun Dec 18 23:40:21 2022 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 60) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
SCT capabilities: (0x0035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
||||
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
|
||||
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 3461
|
||||
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 2461
|
||||
160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0
|
||||
161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 84
|
||||
163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 4
|
||||
164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 81129
|
||||
165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 115
|
||||
166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 15
|
||||
167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 62
|
||||
168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 1000
|
||||
169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 94
|
||||
175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 26
|
||||
178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0
|
||||
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 133
|
||||
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 35
|
||||
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
|
||||
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
|
||||
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
|
||||
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0003 100 100 050 Pre-fail Always - 0
|
||||
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
||||
241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 97700
|
||||
242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 78722
|
||||
245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 162258
|
||||
|
||||
SMART Error Log Version: 1
|
||||
Warning: ATA error count 0 inconsistent with error log pointer 1
|
||||
|
||||
ATA Error Count: 0
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 ec 00 00 00 00 00 Device Fault
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA
|
||||
|
||||
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 23 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
7 0 65535 Read_scanning was completed without error
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
|
||||
|
155
SSD/Team/TIM3/TIM3F56032GMC104/96BCD45F49F2
Normal file
155
SSD/Team/TIM3/TIM3F56032GMC104/96BCD45F49F2
Normal file
@@ -0,0 +1,155 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM TIM3F56032GMC104
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: SBFM01.1
|
||||
User Capacity: 32,017,047,552 bytes [32.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: mSATA
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri May 27 17:33:09 2022 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (65535) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x79) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 6) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 5
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 24
|
||||
168 Unknown_Attribute -O--C- 100 100 000 - 0
|
||||
170 Unknown_Attribute PO---- 093 093 010 - 25
|
||||
173 Unknown_Attribute -O--C- 100 100 000 - 131079
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 18
|
||||
194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33)
|
||||
218 Unknown_Attribute PO-R-- 100 100 050 - 17
|
||||
231 Unknown_SSD_Attribute PO--C- 100 100 000 - 99
|
||||
241 Total_LBAs_Written -O--C- 100 100 000 - 47
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 24 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5 --- Power-on Hours
|
||||
0x01 0x018 6 99902384 --- Logical Sectors Written
|
||||
0x01 0x028 6 98677467 --- Logical Sectors Read
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x020 1 33 --- Highest Temperature
|
||||
0x05 0x028 1 33 --- Lowest Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x018 4 17 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 13 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
147
SSD/Team/TM8/TM8PS7512G/220ABB69D907
Normal file
147
SSD/Team/TM8/TM8PS7512G/220ABB69D907
Normal file
@@ -0,0 +1,147 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM TM8PS7512G
|
||||
Serial Number: --
|
||||
Firmware Version: U0503A0
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jan 2 11:10:27 2023 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 25
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 28
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 92
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 111
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 1
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 5050
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 24
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 32
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 296
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 38
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 28 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 25 --- Power-on Hours
|
||||
0x01 0x018 6 19422129 --- Logical Sectors Written
|
||||
0x01 0x020 6 417877 --- Number of Write Commands
|
||||
0x01 0x028 6 2528732 --- Logical Sectors Read
|
||||
0x01 0x030 6 51518 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
|
||||
|
170
SSD/Team/TM8/TM8PS7512G/9EFAA1DDC0C8
Normal file
170
SSD/Team/TM8/TM8PS7512G/9EFAA1DDC0C8
Normal file
@@ -0,0 +1,170 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM TM8PS7512G
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000000 ...
|
||||
Firmware Version: V1.3.0
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Feb 11 23:02:16 2023 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 33) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0031) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--C- 100 100 000 - 17115
|
||||
12 Power_Cycle_Count -O--C- 100 100 000 - 84
|
||||
192 Power-Off_Retract_Count -O--C- 100 100 000 - 72
|
||||
199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
|
||||
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 92
|
||||
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 224
|
||||
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 175
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 24197
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 19289
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 48 Celsius
|
||||
Power Cycle Min/Max Temperature: ?/48 Celsius
|
||||
Lifetime Min/Max Temperature: ?/ ? Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -127/127 Celsius
|
||||
Min/Max Temperature Limit: -127/127 Celsius
|
||||
Temperature History Size (Index): 478 (200)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 84 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 17115 --- Power-on Hours
|
||||
0x01 0x018 6 50744982769 --- Logical Sectors Written
|
||||
0x01 0x020 6 791544282 --- Number of Write Commands
|
||||
0x01 0x028 6 40453388972 --- Logical Sectors Read
|
||||
0x01 0x030 6 751666662 --- Number of Read Commands
|
||||
0x01 0x038 6 15772606272568 --- Date and Time TimeStamp
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 29 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 45 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
147
SSD/Team/TM8/TM8PS7512G/EBDAD17F1BD8
Normal file
147
SSD/Team/TM8/TM8PS7512G/EBDAD17F1BD8
Normal file
@@ -0,0 +1,147 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TEAM TM8PS7512G
|
||||
Serial Number: --
|
||||
Firmware Version: U0503A0
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jun 23 17:42:29 2022 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 609
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 39
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute PO--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 47
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 3600
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 14
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 1
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 1
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 5050
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 25
|
||||
194 Temperature_Celsius -O---K 100 100 050 - 38
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written ----CK 100 100 050 - 8480
|
||||
242 Total_LBAs_Read ----CK 100 100 050 - 252
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xde GPL VS 8 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 39 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 609 --- Power-on Hours
|
||||
0x01 0x018 6 555804726 --- Logical Sectors Written
|
||||
0x01 0x020 6 80884 --- Number of Write Commands
|
||||
0x01 0x028 6 16539881 --- Logical Sectors Read
|
||||
0x01 0x030 6 7344 --- Number of Read Commands
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
|
Reference in New Issue
Block a user