mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 3633, modified: 0)
This commit is contained in:
Andrey Ponomarenko
162
SSD/XPG/SX950/SX950U/73FEC6DE58B3
Normal file
162
SSD/XPG/SX950/SX950U/73FEC6DE58B3
Normal file
@@ -0,0 +1,162 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: XPG SX950U
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 707c18 ...
|
||||
Firmware Version: R0126A
|
||||
User Capacity: 240,057,409,536 bytes [240 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 T13/2161-D revision 5
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Apr 22 20:19:41 2022 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
||||
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 8
|
||||
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 8889
|
||||
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 2446
|
||||
148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 18829
|
||||
149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1299
|
||||
150 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1219
|
||||
151 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1255
|
||||
159 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
||||
160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 11
|
||||
161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 35
|
||||
163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 23
|
||||
164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 106287
|
||||
165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 252
|
||||
166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 179
|
||||
167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 230
|
||||
168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1500
|
||||
169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100
|
||||
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 4
|
||||
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 236
|
||||
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 37
|
||||
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 9
|
||||
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 2
|
||||
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 8580
|
||||
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
||||
241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 270161
|
||||
242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 326315
|
||||
245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1913166
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 0
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 ec 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
|
||||
c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 5857 -
|
||||
# 2 Short offline Completed without error 00% 5839 -
|
||||
# 3 Short offline Completed without error 00% 5831 -
|
||||
# 4 Extended offline Completed without error 00% 5829 -
|
||||
# 5 Short offline Completed without error 00% 5820 -
|
||||
# 6 Short offline Completed without error 00% 5816 -
|
||||
# 7 Short offline Completed without error 00% 5815 -
|
||||
# 8 Short offline Completed without error 00% 5814 -
|
||||
# 9 Short offline Completed without error 00% 5805 -
|
||||
#10 Short offline Completed without error 00% 5800 -
|
||||
#11 Short offline Completed without error 00% 5796 -
|
||||
#12 Short offline Completed without error 00% 5791 -
|
||||
#13 Short offline Completed without error 00% 5787 -
|
||||
#14 Short offline Completed without error 00% 5784 -
|
||||
#15 Short offline Completed without error 00% 5765 -
|
||||
#16 Short offline Completed without error 00% 5751 -
|
||||
#17 Short offline Completed without error 00% 5746 -
|
||||
#18 Short offline Completed without error 00% 5743 -
|
||||
#19 Short offline Completed without error 00% 5739 -
|
||||
#20 Short offline Completed without error 00% 5736 -
|
||||
#21 Short offline Completed without error 00% 5722 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user