diff --git a/HDD/Hitachi/HTS5450/HTS545032B9A300/991D16E439B4 b/HDD/Hitachi/HTS5450/HTS545032B9A300/991D16E439B4 new file mode 100644 index 000000000..73573755c --- /dev/null +++ b/HDD/Hitachi/HTS5450/HTS545032B9A300/991D16E439B4 @@ -0,0 +1,243 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K500.B +Device Model: HTS545032B9A300 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: PB3OC60F +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Feb 17 08:18:26 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 106) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 110 110 040 - 4320 + 3 Spin_Up_Time POS--- 144 144 033 - 2 + 4 Start_Stop_Count -O--C- 077 077 000 - 36298 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 118 118 040 - 33 + 9 Power_On_Hours -O--C- 057 057 000 - 19024 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1497 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 220 +193 Load_Cycle_Count -O--C- 050 050 000 - 508979 +194 Temperature_Celsius -O---- 220 220 000 - 25 (Min/Max 8/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 8 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 8 [3] occurred at disk power-on lifetime: 15882 hours (661 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 10 00 01 00 59 67 f8 e0 00 Error: IDNF 16 sectors at LBA = 0x1005967f8 = 4300826616 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 10 00 01 00 59 67 f8 e0 00 00:16:42.800 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 f0 e0 00 00:16:42.800 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 e0 e0 00 00:16:42.800 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 d0 e0 00 00:16:42.800 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 c0 e0 00 00:16:42.800 READ DMA EXT + +Error 7 [2] occurred at disk power-on lifetime: 15882 hours (661 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 10 00 01 00 3b 97 f8 e0 00 Error: IDNF 16 sectors at LBA = 0x1003b97f8 = 4298872824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 10 00 01 00 3b 97 f8 e0 00 00:16:37.600 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae f0 e0 00 00:16:37.600 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae e0 e0 00 00:16:37.600 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae d0 e0 00 00:16:37.600 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae c0 e0 00 00:16:37.600 READ DMA EXT + +Error 6 [1] occurred at disk power-on lifetime: 15882 hours (661 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 10 00 01 00 59 67 f8 e0 00 Error: IDNF 16 sectors at LBA = 0x1005967f8 = 4300826616 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 10 00 01 00 59 67 f8 e0 00 00:00:22.300 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 f0 e0 00 00:00:22.300 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 e0 e0 00 00:00:22.300 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 d0 e0 00 00:00:22.300 READ DMA EXT + 25 00 00 00 10 00 00 0f d5 16 c0 e0 00 00:00:22.300 READ DMA EXT + +Error 5 [0] occurred at disk power-on lifetime: 15882 hours (661 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 10 00 01 00 3b 97 f8 e0 00 Error: IDNF 16 sectors at LBA = 0x1003b97f8 = 4298872824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 10 00 01 00 3b 97 f8 e0 00 00:00:17.100 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae f0 e0 00 00:00:17.100 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae e0 e0 00 00:00:17.100 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae d0 e0 00 00:00:17.100 READ DMA EXT + 25 00 00 00 10 00 00 0f 7b ae c0 e0 00 00:00:17.100 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 749 - +# 2 Short offline Completed without error 00% 2 - +# 3 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 16/26 Celsius +Lifetime Min/Max Temperature: 8/47 Celsius +Specified Max Operating Temperature: 30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (214) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Samsung/HD103/HD103SJ/C89926A6234C b/HDD/Samsung/HD103/HD103SJ/C89926A6234C new file mode 100644 index 000000000..7a85f74d5 --- /dev/null +++ b/HDD/Samsung/HD103/HD103SJ/C89926A6234C @@ -0,0 +1,355 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F3 +Device Model: SAMSUNG HD103SJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AJ10001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Feb 17 21:37:36 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 254 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 137) The previous self-test completed having + a test element that failed and the + device is suspected of having handling + damage. +Total time to complete Offline +data collection: ( 9360) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 156) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 001 001 051 NOW 84362 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 070 047 025 - 9148 + 4 Start_Stop_Count -O--CK 090 090 000 - 10406 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 24972 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 + 12 Power_Cycle_Count -O--CK 091 091 000 - 9451 +191 G-Sense_Error_Rate -O---K 100 100 000 - 51 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 054 000 - 35 (Min/Max 14/46) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 002 002 000 - 8158 +198 Offline_Uncorrectable ----CK 001 001 000 - 9784 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 243 +223 Load_Retry_Count -O--CK 252 252 000 - 0 +225 Load_Cycle_Count -O--CK 099 099 000 - 11268 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 48646 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 48646 [5] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 2b 4b bb 08 40 00 Error: UNC at LBA = 0x2b4bbb08 = 726383368 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b bb 08 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b bb 08 40 08 00:00:03.360 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.360 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.360 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.360 IDENTIFY DEVICE + +Error 48645 [4] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 2b 4b bb 08 40 00 Error: UNC at LBA = 0x2b4bbb08 = 726383368 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b bb 08 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b bb 08 40 08 00:00:03.359 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.359 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.359 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.359 IDENTIFY DEVICE + +Error 48644 [3] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 2b 4b bb 08 40 00 Error: UNC at LBA = 0x2b4bbb08 = 726383368 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b bb 08 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b bb 08 40 08 00:00:03.358 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.358 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.358 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.358 IDENTIFY DEVICE + +Error 48643 [2] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 2b 4b ba 80 40 00 Error: UNC at LBA = 0x2b4bba80 = 726383232 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b ba 80 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b ba 80 40 08 00:00:03.357 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.357 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.357 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.357 IDENTIFY DEVICE + +Error 48642 [1] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 2b 4b ba 80 40 00 Error: UNC at LBA = 0x2b4bba80 = 726383232 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b ba 80 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b ba 80 40 08 00:00:03.355 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.355 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.355 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.355 IDENTIFY DEVICE + +Error 48641 [0] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 2b 4b ba 80 40 00 Error: UNC at LBA = 0x2b4bba80 = 726383232 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b ba 80 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b ba 80 40 08 00:00:03.354 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.354 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.354 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.354 IDENTIFY DEVICE + +Error 48640 [7] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 07 00 00 2b 4b ba d9 40 00 Error: UNC at LBA = 0x2b4bbad9 = 726383321 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b ba d8 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b ba d8 40 08 00:00:03.353 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.353 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.353 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.353 IDENTIFY DEVICE + +Error 48639 [6] occurred at disk power-on lifetime: 24735 hours (1030 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 07 00 00 2b 4b ba d9 40 00 Error: UNC at LBA = 0x2b4bbad9 = 726383321 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 08 00 00 2b 4b ba d8 40 08 00:00:03.347 READ FPDMA QUEUED + 60 00 10 00 08 00 00 2b 4b ba d8 40 08 00:00:03.352 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:03.352 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:03.352 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:03.352 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: handling damage?? 90% 24229 0 +# 2 Extended offline Completed: handling damage?? 90% 24225 0 +# 3 Short offline Completed: handling damage?? 90% 24216 0 +# 4 Short offline Completed: handling damage?? 90% 24210 0 +# 5 Short offline Completed: handling damage?? 90% 19759 0 +# 6 Short offline Completed: handling damage?? 90% 19753 0 +# 7 Short offline Completed: handling damage?? 90% 17294 0 +# 8 Extended offline Completed: handling damage?? 90% 17294 0 +# 9 Short offline Completed: handling damage?? 90% 17203 0 +#10 Short offline Completed: handling damage?? 90% 11868 0 + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed_handling_damage?? [90% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 27/36 Celsius +Lifetime Min/Max Temperature: 17/53 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (108) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 1948 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + + + diff --git a/HDD/Samsung/HM250/HM250HI/46277831A8E2 b/HDD/Samsung/HM250/HM250HI/46277831A8E2 new file mode 100644 index 000000000..1d965412b --- /dev/null +++ b/HDD/Samsung/HM250/HM250HI/46277831A8E2 @@ -0,0 +1,347 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint M7 +Device Model: SAMSUNG HM250HI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 2AC101C4 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Feb 14 15:35:40 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 20) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 4080) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 68) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 576 + 2 Throughput_Performance POS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 093 092 025 - 2360 + 4 Start_Stop_Count -O--CK 097 097 000 - 3516 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate POSR-K 252 252 051 - 0 + 8 Seek_Time_Performance P-S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7432 + 10 Spin_Retry_Count PO--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 441 + 12 Power_Cycle_Count -O--CK 097 097 000 - 3208 +183 Runtime_Bad_Block -O--CK 252 252 010 - 0 +184 End-to-End_Error PO--CK 252 252 048 - 0 +186 Unknown_Attribute -O--CK 252 252 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 82 +188 Command_Timeout -O--CK 252 252 000 - 0 +190 Airflow_Temperature_Cel -O---- 066 048 040 - 34 (Min/Max 13/53) +191 G-Sense_Error_Rate -O---K 100 100 000 - 1551 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +193 Load_Cycle_Count -O--CK 074 074 000 - 267486 +194 Temperature_Celsius -O---- 064 048 000 - 34 (Min/Max 13/53) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 095 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 489 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xbb GPL VS 4 Device vendor specific log +0xbc GPL VS 2 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 413 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 413 [4] occurred at disk power-on lifetime: 6344 hours (264 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 ff 98 00 00 16 be e7 c8 40 00 Error: UNC at LBA = 0x16bee7c8 = 381609928 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 16 be e7 60 40 08 00:00:14.609 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be e5 e0 40 08 00:00:14.609 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be e4 60 40 08 00:00:14.608 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be e2 e0 40 08 00:00:14.608 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be e1 60 40 08 00:00:14.608 READ FPDMA QUEUED + +Error 412 [3] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 ff 6e 00 00 18 3f 6f 1a 40 00 Error: UNC at LBA = 0x183f6f1a = 406810394 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 18 3f 70 08 40 08 00:00:17.166 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 6e 88 40 08 00:00:17.166 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 6d 08 40 08 00:00:17.166 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 6b 88 40 08 00:00:17.166 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 6a 08 40 08 00:00:17.166 READ FPDMA QUEUED + +Error 411 [2] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 ff 07 00 00 18 3f 60 81 40 00 Error: UNC at LBA = 0x183f6081 = 406806657 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 18 3f 5f 88 40 08 00:00:17.164 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 5e 08 40 08 00:00:17.164 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 5c 88 40 08 00:00:17.164 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 5b 08 40 08 00:00:17.164 READ FPDMA QUEUED + 60 00 00 01 80 00 00 18 3f 59 88 40 08 00:00:17.164 READ FPDMA QUEUED + +Error 410 [1] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 ff 99 00 00 16 c0 b2 ef 40 00 Error: UNC at LBA = 0x16c0b2ef = 381727471 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 16 c0 b2 88 40 08 00:00:16.919 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 c0 b1 08 40 08 00:00:16.919 READ FPDMA QUEUED + 61 00 00 00 08 00 00 00 1a 66 e0 40 08 00:00:16.919 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 19 16 a0 40 08 00:00:16.919 WRITE FPDMA QUEUED + 60 00 03 01 80 00 00 16 c0 af 88 40 08 00:00:16.918 READ FPDMA QUEUED + +Error 409 [0] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 fe 97 00 00 16 c0 80 f1 40 00 Error: UNC at LBA = 0x16c080f1 = 381714673 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 16 c0 7f 88 40 08 00:00:16.916 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 c0 7e 08 40 08 00:00:16.916 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 c0 7c 88 40 08 00:00:16.916 READ FPDMA QUEUED + 60 00 00 03 00 00 00 16 c0 79 88 40 08 00:00:16.916 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:16.916 FLUSH CACHE EXT + +Error 408 [7] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 ff ff 00 00 16 bf f8 89 40 00 Error: UNC at LBA = 0x16bff889 = 381679753 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 16 bf f8 88 40 08 00:00:16.912 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 bf f7 08 40 08 00:00:16.912 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 bf f5 88 40 08 00:00:16.912 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 bf f4 08 40 08 00:00:16.912 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 bf f2 88 40 08 00:00:16.912 READ FPDMA QUEUED + +Error 407 [6] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 ff 78 00 00 16 be bf 90 40 00 Error: UNC at LBA = 0x16bebf90 = 381599632 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 16 be bf 08 40 08 00:00:16.907 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be bd 88 40 08 00:00:16.907 READ FPDMA QUEUED + 61 00 00 00 18 00 00 00 3b 3e 88 40 08 00:00:16.907 WRITE FPDMA QUEUED + 60 00 00 01 80 00 00 16 be bc 08 40 08 00:00:16.907 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be ba 88 40 08 00:00:16.906 READ FPDMA QUEUED + +Error 406 [5] occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 01 fe 8a 00 00 16 be 40 fe 40 00 Error: UNC at LBA = 0x16be40fe = 381567230 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 80 00 00 16 be 41 08 40 08 00:00:16.904 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be 3f 88 40 08 00:00:16.904 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be 3e 08 40 08 00:00:16.904 READ FPDMA QUEUED + 60 00 00 01 80 00 00 16 be 3c 88 40 08 00:00:16.904 READ FPDMA QUEUED + 60 00 10 01 80 00 00 16 be 3b 08 40 08 00:00:16.904 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 40% 5951 - +# 2 Short offline Completed without error 00% 5937 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Aborted_by_host [40% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 33/35 Celsius +Lifetime Min/Max Temperature: 19/61 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (43) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 22 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 22 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + diff --git a/HDD/Seagate/ST1000/ST1000LM035-1RK172/69E618C56CCD b/HDD/Seagate/ST1000/ST1000LM035-1RK172/69E618C56CCD new file mode 100644 index 000000000..ebc2f99ca --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM035-1RK172/69E618C56CCD @@ -0,0 +1,212 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Mobile HDD +Device Model: ST1000LM035-1RK172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM3 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 15:02:11 2023 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 156) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 064 006 - 139899627 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4286 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 079 060 045 - 4375176772 + 9 Power_On_Hours -O--CK 098 098 000 - 2560 (213 141 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1452 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 4295032833 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 072 051 040 - 28 (Min/Max 19/32) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 15 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 +193 Load_Cycle_Count -O--CK 074 074 000 - 53486 +194 Temperature_Celsius -O---K 028 049 000 - 28 (0 17 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2315 (250 231 0) +241 Total_LBAs_Written ------ 100 253 000 - 7690589279 +242 Total_LBAs_Read ------ 100 253 000 - 10769037333 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2276 - +# 2 Short offline Completed without error 00% 1729 - +# 3 Short offline Aborted by host 10% 1669 - +# 4 Short offline Completed without error 00% 19 - +# 5 Short offline Completed without error 00% 12 - +# 6 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 19/32 Celsius +Lifetime Min/Max Temperature: 16/49 Celsius +Specified Max Operating Temperature: 32 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (99) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1452 --- Lifetime Power-On Resets +0x01 0x010 4 2560 --- Power-on Hours +0x01 0x018 6 7690590671 --- Logical Sectors Written +0x01 0x020 6 130921959 --- Number of Write Commands +0x01 0x028 6 10769042166 --- Logical Sectors Read +0x01 0x030 6 118800877 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 205 --- Spindle Motor Power-on Hours +0x03 0x010 4 36 --- Head Flying Hours +0x03 0x018 4 53486 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3250/ST3250310AS/D7A3DB4BAF9B b/HDD/Seagate/ST3250/ST3250310AS/D7A3DB4BAF9B new file mode 100644 index 000000000..3b03f4e68 --- /dev/null +++ b/HDD/Seagate/ST3250/ST3250310AS/D7A3DB4BAF9B @@ -0,0 +1,230 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.10 +Device Model: ST3250310AS +Serial Number: -- +Firmware Version: 3.AHB +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Fri Feb 17 21:05:11 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Another SCT command is executing, abort Feature Control +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 73) The previous self-test completed having + a test element that failed and the test + element that failed is not known. +Total time to complete Offline +data collection: ( 433) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 56) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 + 3 Spin_Up_Time -O---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 146 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2 + 7 Seek_Error_Rate POSR-- 087 060 030 - 594906567 + 9 Power_On_Hours -O--CK 061 061 000 - 34687 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count PO--CK 100 100 020 - 146 +184 End-to-End_Error PO--CK 097 097 097 NOW 3 +187 Reported_Uncorrect -O-RCK 100 100 000 - 0 +189 High_Fly_Writes -O---K 100 100 045 - 0 +190 Airflow_Temperature_Cel -O---K 065 053 000 - 35 (Min/Max 25/37) +194 Temperature_Celsius -O-RC- 035 047 000 - 35 (0 20 0 0 0) +195 Hardware_ECC_Recovered -O--C- 061 044 000 - 172917157 +197 Current_Pending_Sector ----C- 100 100 000 - 0 +198 Offline_Uncorrectable -OSRCK 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 200 200 000 - 3 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 34518 hours (1438 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 80 00 02 39 00 07 29 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x239000729 = 9546237737 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 02 2c 00 6c 28 e0 00 00:35:56.921 READ DMA EXT + 25 00 00 00 80 00 02 2b 00 6c a8 e0 00 00:35:56.920 READ DMA EXT + 25 00 00 00 80 00 02 2b 00 6c 28 e0 00 00:35:56.920 READ DMA EXT + 25 00 00 00 80 00 02 2a 00 6c a8 e0 00 00:35:56.919 READ DMA EXT + 35 00 00 00 08 00 02 75 00 54 58 e0 00 00:35:56.919 WRITE DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 30578 hours (1274 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 80 00 00 f8 00 08 47 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0xf8000847 = 4160751687 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 03 72 00 e5 27 e0 00 07:40:33.607 READ DMA EXT + 25 00 00 00 40 00 03 71 00 e5 e7 e0 00 07:40:33.647 READ DMA EXT + 25 00 00 00 40 00 03 71 00 e5 e7 e0 00 07:40:33.646 READ DMA EXT + 25 00 00 00 60 00 03 71 00 e5 87 e0 00 07:40:33.646 READ DMA EXT + 25 00 00 00 60 00 03 70 00 e5 c7 e0 00 07:40:33.645 READ DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 27298 hours (1137 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 08 00 00 38 00 7a cf e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x38007acf = 939555535 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 70 00 66 af e0 00 00:50:25.453 READ DMA EXT + 25 00 00 00 08 00 00 6c 00 66 3f e0 00 00:50:25.449 READ DMA EXT + 25 00 00 00 08 00 03 6e 00 a8 b7 e0 00 00:50:25.449 READ DMA EXT + 25 00 00 00 08 00 00 6f 00 66 57 e0 00 00:50:25.448 READ DMA EXT + 25 00 00 00 08 00 00 70 00 66 a7 e0 00 00:50:25.448 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: unknown failure 90% 34636 515803021802 +# 2 Short offline Completed: unknown failure 90% 34615 515431105820 +# 3 Short offline Completed: unknown failure 90% 34613 515780430703 +# 4 Extended offline Interrupted (host reset) 90% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: --/37 Celsius +Lifetime Min/Max Temperature: --/46 Celsius + +Another SCT command is executing, abort Read Data Table +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Read SCT Temperature History failed + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 27 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy +0x8002 2 0 Vendor specific +0x8003 2 15 Vendor specific +0x8004 2 0 Vendor specific + diff --git a/HDD/Seagate/ST4000/ST4000NM0035-1V4107/7F7205B95E15 b/HDD/Seagate/ST4000/ST4000NM0035-1V4107/7F7205B95E15 new file mode 100644 index 000000000..0f3005c8b --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000NM0035-1V4107/7F7205B95E15 @@ -0,0 +1,230 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Enterprise Capacity 3.5 HDD +Device Model: ST4000NM0035-1V4107 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: TN05 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 15:02:11 2023 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 405) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 064 044 - 61163106 + 3 Spin_Up_Time PO---- 093 093 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1351 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 088 060 045 - 638552799 + 9 Power_On_Hours -O--CK 094 094 000 - 5732 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1293 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 001 000 - 2 3 797 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 052 040 - 35 (Min/Max 18/35) +191 G-Sense_Error_Rate -O--CK 097 097 000 - 6965 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 78 +193 Load_Cycle_Count -O--CK 094 094 000 - 13998 +194 Temperature_Celsius -O---K 035 048 000 - 35 (0 18 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 016 001 000 - 61163106 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 902 +240 Head_Flying_Hours ------ 100 253 000 - 4721h+04m+44.329s +241 Total_LBAs_Written ------ 100 253 000 - 45108020484 +242 Total_LBAs_Read ------ 100 253 000 - 38819734212 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 18/35 Celsius +Lifetime Min/Max Temperature: 18/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/40 Celsius +Min/Max Temperature Limit: 5/60 Celsius +Temperature History Size (Index): 128 (99) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1293 --- Lifetime Power-On Resets +0x01 0x010 4 5732 --- Power-on Hours +0x01 0x018 6 45109647341 --- Logical Sectors Written +0x01 0x020 6 185317739 --- Number of Write Commands +0x01 0x028 6 38823028585 --- Logical Sectors Read +0x01 0x030 6 186105424 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1042360981 N-- Spindle Motor Power-on Hours +0x03 0x010 4 1042358236 N-- Head Flying Hours +0x03 0x018 4 13998 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 76 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 797 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 34 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 3840 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1776 --- Number of Hardware Resets +0x06 0x010 4 241 --- Number of ASR Events +0x06 0x018 4 902 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST500/ST500DM002-1BD142/BE336BED4364 b/HDD/Seagate/ST500/ST500DM002-1BD142/BE336BED4364 new file mode 100644 index 000000000..8cf7361d0 --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM002-1BD142/BE336BED4364 @@ -0,0 +1,170 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST500DM002-1BD142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: HP73 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 13:16:18 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 82) minutes. +SCT capabilities: (0x103b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 107 099 006 - 14389888 + 3 Spin_Up_Time PO---K 099 097 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3444 + 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 432 + 7 Seek_Error_Rate POSR-K 087 060 030 - 510125231 + 9 Power_On_Hours -O--CK 062 062 000 - 33594 + 10 Spin_Retry_Count PO--CK 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1692 +180 Unknown_HDD_Attribute PO-R-K 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 097 000 - 2 2 8 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 049 045 - 41 (Min/Max 39/41) +194 Temperature_Celsius -O---K 041 051 000 - 41 (0 17 0 0 0) +195 Hardware_ECC_Recovered -O-RCK 041 030 000 - 14389888 +196 Reallocated_Event_Count -O--CK 099 099 036 - 432 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 24 +199 UDMA_CRC_Error_Count -O--CK 200 199 000 - 1402 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 32445 - +# 2 Short offline Aborted by host 90% 32445 - +# 3 Extended offline Interrupted (host reset) 90% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 39/40 Celsius +Lifetime Min/Max Temperature: 17/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (29) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST9320/ST9320423ASG/AF2E0949B7A3 b/HDD/Seagate/ST9320/ST9320423ASG/AF2E0949B7A3 new file mode 100644 index 000000000..75bedcd2e --- /dev/null +++ b/HDD/Seagate/ST9320/ST9320423ASG/AF2E0949B7A3 @@ -0,0 +1,174 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 7200.4 +Device Model: ST9320423ASG +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0004SDM1 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Feb 16 17:29:49 2023 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 130695782 + 3 Spin_Up_Time PO---- 100 097 085 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3934 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 075 060 030 - 17308437884 + 9 Power_On_Hours -O--CK 080 080 000 - 17788 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 097 037 020 - 3768 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 049 045 - 37 (Min/Max 29/37) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 98 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 3 +193 Load_Cycle_Count -O--CK 001 001 000 - 846254 +194 Temperature_Celsius -O---K 037 051 000 - 37 (243 52 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 055 055 000 - 130695782 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 13892 (37 131 0) +241 Total_LBAs_Written ------ 100 253 000 - 1611550754 +242 Total_LBAs_Read ------ 100 253 000 - 4073498572 +254 Free_Fall_Sensor -O--CK 001 001 000 - 90 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - +# 2 Short offline Aborted by host 90% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 29/37 Celsius +Lifetime Min/Max Temperature: 0/52 Celsius +Specified Max Operating Temperature: 35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (115) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Toshiba/MK2576/MK2576GSXZ/A6660C64F835 b/HDD/Toshiba/MK2576/MK2576GSXZ/A6660C64F835 new file mode 100644 index 000000000..82b86685d --- /dev/null +++ b/HDD/Toshiba/MK2576/MK2576GSXZ/A6660C64F835 @@ -0,0 +1,174 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MK2576GSXZ +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GS001A +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Feb 17 11:55:27 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 100) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1180 + 4 Start_Stop_Count -O--CK 100 100 000 - 153 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 42009 + 10 Spin_Retry_Count PO--CK 103 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 153 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 2 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 58 +193 Load_Cycle_Count -O--CK 100 100 000 - 1574 +194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 17/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 63 +222 Loaded_Hours -O--CK 098 098 000 - 825 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 320 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 41839 - +# 2 Short offline Completed without error 00% 26 - +# 3 Short offline Completed without error 00% 1 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 29/32 Celsius +Lifetime Min/Max Temperature: 17/62 Celsius +Under/Over Temperature Limit Count: 0/10 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (457) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/WDC/WD10/WD10EZEX-00BN5A0/465994CF5D4B b/HDD/WDC/WD10/WD10EZEX-00BN5A0/465994CF5D4B new file mode 100644 index 000000000..b87c6d91d --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-00BN5A0/465994CF5D4B @@ -0,0 +1,322 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-00BN5A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 13:16:17 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11280) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 117) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 675 + 3 Spin_Up_Time POS--K 173 172 021 - 2308 + 4 Start_Stop_Count -O--CK 092 092 000 - 8458 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 063 063 000 - 27497 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 093 093 000 - 7807 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 1298 +193 Load_Cycle_Count -O--CK 198 198 000 - 7661 +194 Temperature_Celsius -O---K 103 091 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 175 000 - 174 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 817 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 817 [0] occurred at disk power-on lifetime: 27392 hours (1141 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 00 01:39:37.652 FLUSH CACHE EXT + ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:39:37.652 IDENTIFY DEVICE + b0 00 d8 00 00 00 00 00 c2 4f 00 a0 00 01:39:35.538 SMART ENABLE OPERATIONS + ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:39:35.538 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 a0 00 01:39:35.538 SET FEATURES [Enable write cache] + +Error 816 [23] occurred at disk power-on lifetime: 27392 hours (1141 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 c2 4f 00 a0 00 Device Fault; Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d8 00 00 00 00 00 c2 4f 00 a0 00 01:39:35.538 SMART ENABLE OPERATIONS + ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:39:35.538 IDENTIFY DEVICE + ef 00 02 00 00 00 00 00 00 00 00 a0 00 01:39:35.538 SET FEATURES [Enable write cache] + ef 00 66 00 00 00 00 00 00 00 00 a0 00 01:39:35.537 SET FEATURES [Disable revert defaults] + 2f 00 00 00 01 00 00 00 00 00 00 e0 00 01:39:33.605 READ LOG EXT + +Error 815 [22] occurred at disk power-on lifetime: 27384 hours (1141 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:43:11.573 FLUSH CACHE EXT + 47 00 00 00 01 00 00 00 00 00 00 e0 08 00:43:11.572 READ LOG DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:43:11.572 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:43:11.572 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:43:11.572 IDENTIFY DEVICE + +Error 814 [21] occurred at disk power-on lifetime: 27384 hours (1141 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:43:07.335 FLUSH CACHE EXT + 47 00 00 00 01 00 00 00 00 00 00 e0 08 00:43:07.335 READ LOG DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:43:07.335 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:43:07.335 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:43:07.334 IDENTIFY DEVICE + +Error 813 [20] occurred at disk power-on lifetime: 27384 hours (1141 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:43:03.091 FLUSH CACHE EXT + 47 00 00 00 01 00 00 00 00 00 00 e0 08 00:43:03.090 READ LOG DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:43:03.090 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:43:03.090 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:43:03.089 IDENTIFY DEVICE + +Error 812 [19] occurred at disk power-on lifetime: 27384 hours (1141 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:42:58.851 FLUSH CACHE EXT + 47 00 00 00 01 00 00 00 00 00 00 e0 08 00:42:58.851 READ LOG DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:42:58.851 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:42:58.851 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:42:58.850 IDENTIFY DEVICE + +Error 811 [18] occurred at disk power-on lifetime: 27384 hours (1141 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:42:54.602 FLUSH CACHE EXT + 47 00 00 00 01 00 00 00 00 00 00 e0 08 00:42:54.602 READ LOG DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:42:54.602 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:42:54.602 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:42:54.602 IDENTIFY DEVICE + +Error 810 [17] occurred at disk power-on lifetime: 27384 hours (1141 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:42:50.357 FLUSH CACHE EXT + 60 00 20 00 b0 00 00 00 00 00 08 40 08 00:42:50.355 READ FPDMA QUEUED + 60 00 08 00 a8 00 00 00 00 00 00 40 08 00:42:50.355 READ FPDMA QUEUED + 60 00 68 00 a0 00 00 74 70 67 88 40 08 00:42:50.355 READ FPDMA QUEUED + 60 00 80 00 98 00 00 74 70 67 00 40 08 00:42:50.355 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 24002 - +# 2 Short offline Aborted by host 90% 24002 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 30/40 Celsius +Lifetime Min/Max Temperature: 0/52 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (52) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1356 Vendor specific + + + diff --git a/HDD/WDC/WD1002/WD1002FAEX-00Z3A0/B3DFE7EED460 b/HDD/WDC/WD1002/WD1002FAEX-00Z3A0/B3DFE7EED460 new file mode 100644 index 000000000..9901cb7f2 --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FAEX-00Z3A0/B3DFE7EED460 @@ -0,0 +1,161 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1002FAEX-00Z3A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 6.0 Gb/s +Local Time is: Tue Feb 14 12:12:15 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (17580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 203) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 170 164 021 - 4491 + 4 Start_Stop_Count -O--CK 100 100 000 - 93 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 94423 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 91 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 82 +193 Load_Cycle_Count -O--CK 200 200 000 - 10 +194 Temperature_Celsius -O---K 109 095 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 3 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 32/44 Celsius +Lifetime Min/Max Temperature: 36/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (442) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 12922179 Vendor specific + diff --git a/HDD/WDC/WD1600/WD1600AAJS-61WAA0/ECB98BABBE95 b/HDD/WDC/WD1600/WD1600AAJS-61WAA0/ECB98BABBE95 new file mode 100644 index 000000000..9abdedb19 --- /dev/null +++ b/HDD/WDC/WD1600/WD1600AAJS-61WAA0/ECB98BABBE95 @@ -0,0 +1,174 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue Serial ATA +Device Model: WDC WD1600AAJS-61WAA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 58.01D58 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Fri Feb 17 21:37:36 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 52) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 + 3 Spin_Up_Time PO---- 153 152 021 - 3316 + 4 Start_Stop_Count -O--CK 095 095 000 - 5685 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-- 100 253 051 - 0 + 9 Power_On_Hours -O--CK 087 087 000 - 9527 + 10 Spin_Retry_Count -O--C- 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 3780 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 1036 +193 Load_Cycle_Count -O--CK 199 199 000 - 5685 +194 Temperature_Celsius -O---K 105 097 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--C- 200 200 000 - 0 +198 Offline_Uncorrectable ----C- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 12 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8774 - +# 2 Extended offline Interrupted (host reset) 60% 8771 - +# 3 Short offline Completed without error 00% 8761 - +# 4 Short offline Completed without error 00% 8756 - +# 5 Short offline Completed without error 00% 4640 - +# 6 Short offline Completed without error 00% 4270 - +# 7 Short offline Completed without error 00% 2404 - +# 8 Short offline Completed without error 00% 2398 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 26/42 Celsius +Lifetime Min/Max Temperature: 31/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/85 Celsius +Temperature History Size (Index): 128 (104) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x8000 4 16307 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EARS-00MVWB1/A58838D2D4BC b/HDD/WDC/WD20/WD20EARS-00MVWB1/A58838D2D4BC new file mode 100644 index 000000000..ee14982c2 --- /dev/null +++ b/HDD/WDC/WD20/WD20EARS-00MVWB1/A58838D2D4BC @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green (AF) +Device Model: WDC WD20EARS-00MVWB1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 51.0AB51 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Feb 14 15:02:12 2023 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (39660) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 382) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 + 3 Spin_Up_Time POS--K 162 158 021 - 6866 + 4 Start_Stop_Count -O--CK 097 097 000 - 3560 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 028 028 000 - 52805 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1001 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 926 +193 Load_Cycle_Count -O--CK 200 200 000 - 2837 +194 Temperature_Celsius -O---K 119 095 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 52792 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 19/32 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (116) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 5297 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EZRZ-00GXCB0/6FEE75FBC2D8 b/HDD/WDC/WD40/WD40EZRZ-00GXCB0/6FEE75FBC2D8 new file mode 100644 index 000000000..15138c768 --- /dev/null +++ b/HDD/WDC/WD40/WD40EZRZ-00GXCB0/6FEE75FBC2D8 @@ -0,0 +1,215 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD40EZRZ-00GXCB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 15:02:12 2023 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43440) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 462) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 163 161 021 - 6841 + 4 Start_Stop_Count -O--CK 100 100 000 - 837 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 5007 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 802 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 53 +193 Load_Cycle_Count -O--CK 166 166 000 - 104222 +194 Temperature_Celsius -O---K 123 104 000 - 27 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 21/27 Celsius +Lifetime Min/Max Temperature: 20/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (200) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 802 --- Lifetime Power-On Resets +0x01 0x010 4 5007 --- Power-on Hours +0x01 0x018 6 32020952030 --- Logical Sectors Written +0x01 0x020 6 110045123 --- Number of Write Commands +0x01 0x028 6 28699915763 --- Logical Sectors Read +0x01 0x030 6 151676648 --- Number of Read Commands +0x01 0x038 6 845330816 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4964 --- Spindle Motor Power-on Hours +0x03 0x010 4 2103 --- Head Flying Hours +0x03 0x018 4 104276 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 53 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1336 --- Number of Hardware Resets +0x06 0x010 4 409 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5299 Vendor specific + diff --git a/HDD/WDC/WD50/WD50NPZZ-00A9JT0/F5FDCB7FE6FE b/HDD/WDC/WD50/WD50NPZZ-00A9JT0/F5FDCB7FE6FE new file mode 100644 index 000000000..87b13ebef --- /dev/null +++ b/HDD/WDC/WD50/WD50NPZZ-00A9JT0/F5FDCB7FE6FE @@ -0,0 +1,165 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD50NPZZ-00A9JT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 22:34:36 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5820) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 57) minutes. +SCT capabilities: (0x30b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 253 253 021 - 4683 + 4 Start_Stop_Count -O--CK 099 099 000 - 1668 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 503 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 656 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 294 +193 Load_Cycle_Count -O--CK 198 198 000 - 6466 +194 Temperature_Celsius -O---K 124 107 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 289 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 82 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 26/28 Celsius +Lifetime Min/Max Temperature: 17/45 Celsius +Specified Max Operating Temperature: 30 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (40) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 402 Vendor specific + diff --git a/HDD/WDC/WD800/WD800AAJS-00TDA0/953E96AE6156 b/HDD/WDC/WD800/WD800AAJS-00TDA0/953E96AE6156 new file mode 100644 index 000000000..129acd1eb --- /dev/null +++ b/HDD/WDC/WD800/WD800AAJS-00TDA0/953E96AE6156 @@ -0,0 +1,294 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue Serial ATA +Device Model: WDC WD800AAJS-00TDA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.00A01 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Tue Feb 14 14:32:03 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2460) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 34) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 23569 + 3 Spin_Up_Time PO---- 167 165 021 - 2625 + 4 Start_Stop_Count -O--CK 097 097 000 - 3964 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-- 200 200 051 - 0 + 9 Power_On_Hours -O--CK 078 078 000 - 16076 + 10 Spin_Retry_Count PO--C- 100 100 051 - 0 + 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 3901 +194 Temperature_Celsius -O---K 110 086 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--C- 150 150 000 - 661 +198 Offline_Uncorrectable ----C- 112 001 000 - 1151 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 105022 +200 Multi_Zone_Error_Rate P--R-- 149 058 051 - 1649 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 25106 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 25106 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 7b 40 6a ab 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 15 6a 7b 00 ab c6 00 00 00 00:00:09.488 NOP [Abort queued commands] + 03 56 c6 6a a4 00 10 00 15 00 00 00 00 01:56:28.886 CFA REQUEST EXTENDED ERROR + 00 10 00 00 05 6a 12 03 9d 40 00 00 00 00:00:01.280 NOP [Abort queued commands] + +Error 25105 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 56 40 6a a4 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 05 6a 56 00 a4 c6 00 00 00 00:00:05.392 NOP [Abort queued commands] + 03 10 30 6a 9d 00 10 00 05 00 00 00 00 01:56:27.026 CFA REQUEST EXTENDED ERROR + 00 00 00 00 f5 6a 10 00 9d c6 00 00 00 00:00:26.376 NOP [Abort queued commands] + +Error 25104 [23] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 12 40 6a 9d 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 08 00 00 67 6a 10 00 9d 30 00 00 00 00:00:01.296 NOP [Abort queued commands] + 00 ca 40 6a 95 00 00 00 f5 00 00 00 03 01:56:27.024 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 e5 6a ca 00 95 c6 00 00 00 00:01:02.736 NOP [Abort queued commands] + +Error 25103 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 ca 40 6a 95 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 e5 6a ca 00 95 c6 00 00 00 00:01:02.736 NOP [Abort queued commands] + 03 83 c6 6a 8e 00 10 00 e5 00 00 00 00 01:56:23.299 CFA REQUEST EXTENDED ERROR + 00 10 00 00 d5 6a 46 03 87 40 00 00 00 00:00:54.528 NOP [Abort queued commands] + +Error 25102 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 83 40 6a 8e 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 d5 6a 83 00 8e c6 00 00 00 00:00:58.640 NOP [Abort queued commands] + 03 46 c6 6a 87 00 10 00 d5 00 00 00 00 01:56:21.446 CFA REQUEST EXTENDED ERROR + 00 10 00 00 c5 6a 0a 03 80 40 00 00 00 00:00:50.432 NOP [Abort queued commands] + +Error 25101 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 46 40 6a 87 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 c5 6a 46 00 87 c6 00 00 00 00:00:54.544 NOP [Abort queued commands] + 03 08 30 6a 80 00 10 00 c5 00 00 00 00 01:56:19.594 CFA REQUEST EXTENDED ERROR + 00 00 00 00 b5 6a 08 00 80 c6 00 00 00 00:00:26.376 NOP [Abort queued commands] + +Error 25100 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 0a 40 6a 80 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 08 00 00 67 6a 08 00 80 30 00 00 00 00:00:50.448 NOP [Abort queued commands] + 00 cb 40 6a 78 00 00 00 b5 00 00 00 03 01:56:19.592 NOP [Reserved subcommand] [OBS-ACS-2] + 00 20 00 00 55 6a cb 03 78 40 00 00 00 00:00:46.352 NOP [Abort queued commands] + +Error 25099 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 00 01 10 00 51 00 00 e3 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 cb 40 6a 78 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 20 00 00 55 6a cb 03 78 40 00 00 00 00:00:46.352 NOP [Abort queued commands] + 00 af 40 6a 71 00 00 00 35 00 00 00 03 01:56:17.739 NOP [Reserved subcommand] [OBS-ACS-2] + 00 00 00 00 15 6a ae 00 71 c6 00 00 00 00:00:13.600 NOP [Abort queued commands] + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: --/35 Celsius +Lifetime Min/Max Temperature: --/58 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/65 Celsius +Min/Max Temperature Limit: 1/70 Celsius +Temperature History Size (Index): 128 (86) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 29 Device-to-host register FISes sent due to a COMRESET +0x8000 4 6314 Vendor specific + + + diff --git a/NVMe/ADATA/SX6000/SX6000LNP 256GB/7F16C56FF55F b/NVMe/ADATA/SX6000/SX6000LNP 256GB/7F16C56FF55F new file mode 100644 index 000000000..73e570abd --- /dev/null +++ b/NVMe/ADATA/SX6000/SX6000LNP 256GB/7F16C56FF55F @@ -0,0 +1,61 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: ADATA SX6000LNP +Serial Number: -- +Firmware Version: VC0S036H +PCI Vendor/Subsystem ID: 0x1cc1 +IEEE OUI Identifier: 0x707c18 +Controller ID: 1 +NVMe Version: 1.4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 707c18 ... +Local Time is: Tue Feb 14 14:32:03 2023 UTC +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0054): DS_Mngmt Sav/Sel_Feat Timestmp +Log Page Attributes (0x02): Cmd_Eff_Lg +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 100 Celsius +Critical Comp. Temp. Threshold: 110 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 4.00W - - 1 1 1 1 0 0 + 2 + 3.00W - - 2 2 2 2 0 0 + 3 - 0.0300W - - 3 3 3 3 5000 10000 + 4 - 0.0050W - - 4 4 4 4 54000 45000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 29 Celsius +Available Spare: 100% +Available Spare Threshold: 32% +Percentage Used: 0% +Data Units Read: 31,724 [16.2 GB] +Data Units Written: 67,593 [34.6 GB] +Host Read Commands: 380,157 +Host Write Commands: 586,694 +Controller Busy Time: 0 +Power Cycles: 8 +Power On Hours: 0 +Unsafe Shutdowns: 4 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, 8 of 8 entries) +No Errors Logged + diff --git a/NVMe/FORESEE/P900/P900F256GB/B60418C0111E b/NVMe/FORESEE/P900/P900F256GB/B60418C0111E new file mode 100644 index 000000000..801fe4dbf --- /dev/null +++ b/NVMe/FORESEE/P900/P900F256GB/B60418C0111E @@ -0,0 +1,58 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: FORESEE P900F256GB +Serial Number: -- +Firmware Version: V2.0 +PCI Vendor/Subsystem ID: 0x1d97 +IEEE OUI Identifier: 0x5b6230 +Controller ID: 0 +NVMe Version: 1.2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 0 +Namespace 1 Formatted LBA Size: 512 +Local Time is: Mon Aug 8 01:54:36 2022 UTC +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0004): Frmw_DL +Optional NVM Commands (0x000c): DS_Mngmt Wr_Zero +Log Page Attributes (0x02): Cmd_Eff_Lg +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 100 Celsius +Critical Comp. Temp. Threshold: 120 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 10.00W - - 0 0 0 0 10 10 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 47 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 76% +Data Units Read: 85,192,008 [43.6 TB] +Data Units Written: 56,554,089 [28.9 TB] +Host Read Commands: 1,182,220,195 +Host Write Commands: 846,108,074 +Controller Busy Time: 96,064 +Power Cycles: 3,261 +Power On Hours: 15,502 +Unsafe Shutdowns: 0 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 47 Celsius + +Error Information (NVMe Log 0x01, 8 of 8 entries) +No Errors Logged + diff --git a/NVMe/Gigabyte/GP-GSM2/GP-GSM2NE3128GNTD/E20B94C70087 b/NVMe/Gigabyte/GP-GSM2/GP-GSM2NE3128GNTD/E20B94C70087 new file mode 100644 index 000000000..d3950faa3 --- /dev/null +++ b/NVMe/Gigabyte/GP-GSM2/GP-GSM2NE3128GNTD/E20B94C70087 @@ -0,0 +1,64 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: GIGABYTE GP-GSM2NE3128GNTD +Serial Number: -- +Firmware Version: EDFM00.5 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 128,035,676,160 [128 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +NVMe Version: 1.3 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 128,035,676,160 [128 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Tue Feb 14 15:02:45 2023 CET +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 95 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 4.50W - - 0 0 0 0 0 0 + 1 + 2.70W - - 1 1 1 1 0 0 + 2 + 2.16W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 1000 1000 + 4 - 0.0020W - - 4 4 4 4 5000 45000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 1 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 25 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 5% +Data Units Read: 2,734,628 [1.40 TB] +Data Units Written: 12,151,235 [6.22 TB] +Host Read Commands: 85,440,960 +Host Write Commands: 239,139,954 +Controller Busy Time: 2,214 +Power Cycles: 25 +Power On Hours: 9,324 +Unsafe Shutdowns: 6 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, 16 of 16 entries) +No Errors Logged + diff --git a/NVMe/Netac/S930/S930E8-256GPN/62839CBF01F1 b/NVMe/Netac/S930/S930E8-256GPN/62839CBF01F1 new file mode 100644 index 000000000..ed3e11af2 --- /dev/null +++ b/NVMe/Netac/S930/S930E8-256GPN/62839CBF01F1 @@ -0,0 +1,60 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Netac S930E8/256GPN +Serial Number: -- +Firmware Version: T0918A0L +PCI Vendor/Subsystem ID: 0x126f +IEEE OUI Identifier: 0x000000 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +NVMe Version: 1.3 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Mon Feb 13 23:07:48 2023 CET +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x0014): DS_Mngmt Sav/Sel_Feat +Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 83 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 40 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 2,559,041 [1.31 TB] +Data Units Written: 4,868,511 [2.49 TB] +Host Read Commands: 20,340,045 +Host Write Commands: 62,750,337 +Controller Busy Time: 1,897 +Power Cycles: 748 +Power On Hours: 1,424 +Unsafe Shutdowns: 275 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 1 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 35 +Thermal Temp. 1 Total Time: 1764 + +Error Information (NVMe Log 0x01, 16 of 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB256/MZVLB256HAHQ-000H1/70F245B8C80F b/NVMe/Samsung/MZVLB256/MZVLB256HAHQ-000H1/70F245B8C80F new file mode 100644 index 000000000..b3fe5d8af --- /dev/null +++ b/NVMe/Samsung/MZVLB256/MZVLB256HAHQ-000H1/70F245B8C80F @@ -0,0 +1,67 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB256HAHQ-000H1 +Serial Number: -- +Firmware Version: EXD70H1Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +NVMe Version: 1.2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 241,716,563,968 [241 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Mon Feb 13 21:11:20 2023 WET +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 24 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 9% +Data Units Read: 23,207,775 [11.8 TB] +Data Units Written: 62,031,563 [31.7 TB] +Host Read Commands: 65,646,984 +Host Write Commands: 1,723,512,389 +Controller Busy Time: 1,407 +Power Cycles: 162 +Power On Hours: 5,832 +Unsafe Shutdowns: 82 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 485 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 24 Celsius +Temperature Sensor 2: 38 Celsius + +Error Information (NVMe Log 0x01, 16 of 256 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 980/SSD 980 500GB/124DAED96D5E b/NVMe/Samsung/SSD 980/SSD 980 500GB/124DAED96D5E new file mode 100644 index 000000000..e7c54e588 --- /dev/null +++ b/NVMe/Samsung/SSD 980/SSD 980 500GB/124DAED96D5E @@ -0,0 +1,67 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 980 500GB +Serial Number: -- +Firmware Version: 2B4QFXO7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 5 +NVMe Version: 1.4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Utilization: 12,827,652,096 [12.8 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Wed Feb 15 14:39:18 2023 CET +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0055): Comp DS_Mngmt Sav/Sel_Feat Timestmp +Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 82 Celsius +Critical Comp. Temp. Threshold: 85 Celsius +Namespace 1 Features (0x10): NP_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 5.24W - - 0 0 0 0 0 0 + 1 + 4.49W - - 1 1 1 1 0 0 + 2 + 2.19W - - 2 2 2 2 0 500 + 3 - 0.0500W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 1000 9000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 26 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 7,831 [4.00 GB] +Data Units Written: 28,016 [14.3 GB] +Host Read Commands: 116,978 +Host Write Commands: 416,824 +Controller Busy Time: 0 +Power Cycles: 43 +Power On Hours: 9 +Unsafe Shutdowns: 10 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 26 Celsius +Temperature Sensor 2: 29 Celsius + +Error Information (NVMe Log 0x01, 16 of 64 entries) +No Errors Logged + diff --git a/NVMe/SanDisk/WD Blue SN570/WD Blue SN570 1TB/FE388455E59A b/NVMe/SanDisk/WD Blue SN570/WD Blue SN570 1TB/FE388455E59A new file mode 100644 index 000000000..52dfcaf57 --- /dev/null +++ b/NVMe/SanDisk/WD Blue SN570/WD Blue SN570 1TB/FE388455E59A @@ -0,0 +1,65 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WD Blue SN570 1TB +Serial Number: -- +Firmware Version: 234100WD +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 1,000,204,886,016 [1.00 TB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +NVMe Version: 1.4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Fri Feb 17 18:37:46 2023 CET +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 80 Celsius +Critical Comp. Temp. Threshold: 85 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 4.20W 3.70W - 0 0 0 0 0 0 + 1 + 2.70W 2.30W - 0 0 0 0 0 0 + 2 + 1.90W 1.80W - 0 0 0 0 0 0 + 3 - 0.0250W - - 3 3 3 3 3900 11000 + 4 - 0.0050W - - 4 4 4 4 5000 44000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 67 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 22,524 [11.5 GB] +Data Units Written: 118,848 [60.8 GB] +Host Read Commands: 398,076 +Host Write Commands: 573,934 +Controller Busy Time: 2 +Power Cycles: 183 +Power On Hours: 9 +Unsafe Shutdowns: 146 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 1 +Warning Comp. Temperature Time: 8 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, 16 of 256 entries) +No Errors Logged + diff --git a/NVMe/SanDisk/WD PC SN810/WD PC SN810 SDCPNRY-512G-1006/1F5282C6E7E7 b/NVMe/SanDisk/WD PC SN810/WD PC SN810 SDCPNRY-512G-1006/1F5282C6E7E7 new file mode 100644 index 000000000..117f52d02 --- /dev/null +++ b/NVMe/SanDisk/WD PC SN810/WD PC SN810 SDCPNRY-512G-1006/1F5282C6E7E7 @@ -0,0 +1,65 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WD PC SN810 SDCPNRY-512G-1006 +Serial Number: -- +Firmware Version: HPS2 +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 8224 +NVMe Version: 1.4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Tue Feb 14 08:46:05 2023 UTC +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 88 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.25W 8.25W - 0 0 0 0 0 0 + 1 + 3.50W 3.50W - 0 0 0 0 0 0 + 2 + 2.60W 2.60W - 0 0 0 0 0 0 + 3 - 0.0250W - - 3 3 3 3 5000 10000 + 4 - 0.0035W - - 4 4 4 4 3900 45700 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 39 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 11,882,134 [6.08 TB] +Data Units Written: 13,732,476 [7.03 TB] +Host Read Commands: 152,599,238 +Host Write Commands: 226,331,165 +Controller Busy Time: 489 +Power Cycles: 345 +Power On Hours: 802 +Unsafe Shutdowns: 44 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, 16 of 256 entries) +No Errors Logged + diff --git a/NVMe/SanDisk/WD_BLACK SN770/WD_BLACK SN770 500GB/2B78CFAF0E7B b/NVMe/SanDisk/WD_BLACK SN770/WD_BLACK SN770 500GB/2B78CFAF0E7B new file mode 100644 index 000000000..52adb47d6 --- /dev/null +++ b/NVMe/SanDisk/WD_BLACK SN770/WD_BLACK SN770 500GB/2B78CFAF0E7B @@ -0,0 +1,68 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.4-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WD_BLACK SN770 500GB +Serial Number: -- +Firmware Version: 731030WD +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +NVMe Version: 1.4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Thu Feb 16 00:03:10 2023 EST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify +Log Page Attributes (0x7e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg *Other* +Maximum Data Transfer Size: 256 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 88 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 4.70W 4.30W - 0 0 0 0 0 0 + 1 + 3.00W 3.00W - 0 0 0 0 0 0 + 2 + 2.20W 2.00W - 0 0 0 0 0 0 + 3 - 0.0150W - - 3 3 3 3 1500 2500 + 4 - 0.0050W - - 4 4 4 4 10000 6000 + 5 - 0.0033W - - 5 5 5 5 176000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 37 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 447,171 [228 GB] +Data Units Written: 828,512 [424 GB] +Host Read Commands: 2,894,191 +Host Write Commands: 9,792,020 +Controller Busy Time: 10 +Power Cycles: 107 +Power On Hours: 478 +Unsafe Shutdowns: 4 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 56 Celsius +Temperature Sensor 2: 37 Celsius + +Error Information (NVMe Log 0x01, 16 of 256 entries) +No Errors Logged + diff --git a/NVMe/Transcend/TS128/TS128GMTE110S/7DEAFAE9CB35 b/NVMe/Transcend/TS128/TS128GMTE110S/7DEAFAE9CB35 new file mode 100644 index 000000000..5abc6c173 --- /dev/null +++ b/NVMe/Transcend/TS128/TS128GMTE110S/7DEAFAE9CB35 @@ -0,0 +1,58 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: TS128GMTE110S +Serial Number: -- +Firmware Version: T1102A0L +PCI Vendor/Subsystem ID: 0x1d79 +IEEE OUI Identifier: 0x000000 +Total NVM Capacity: 128,035,676,160 [128 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +NVMe Version: 1.3 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 128,035,676,160 [128 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Tue Feb 14 15:05:07 2023 +08 +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x0014): DS_Mngmt Sav/Sel_Feat +Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 83 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 53 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 5% +Data Units Read: 50,795 [26.0 GB] +Data Units Written: 4,544,492 [2.32 TB] +Host Read Commands: 1,014,553 +Host Write Commands: 52,999,254 +Controller Busy Time: 2,561 +Power Cycles: 47 +Power On Hours: 1,649 +Unsafe Shutdowns: 36 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, 16 of 64 entries) +No Errors Logged + diff --git a/NVMe/WDC/PC SN530/PC SN530 SDBPNPZ-512G-1002/61F5559E612E b/NVMe/WDC/PC SN530/PC SN530 SDBPNPZ-512G-1002/61F5559E612E new file mode 100644 index 000000000..fb4165dec --- /dev/null +++ b/NVMe/WDC/PC SN530/PC SN530 SDBPNPZ-512G-1002/61F5559E612E @@ -0,0 +1,65 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WDC PC SN530 SDBPNPZ-512G-1002 +Serial Number: -- +Firmware Version: 21106000 +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +NVMe Version: 1.4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Tue Feb 14 10:20:38 2023 UTC +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 80 Celsius +Critical Comp. Temp. Threshold: 85 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.50W 2.10W - 0 0 0 0 0 0 + 1 + 2.40W 1.60W - 0 0 0 0 0 0 + 2 + 1.90W 1.50W - 0 0 0 0 0 0 + 3 - 0.0250W - - 3 3 3 3 3900 11000 + 4 - 0.0050W - - 4 4 4 4 5000 39000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 37 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 8% +Data Units Read: 102,388,562 [52.4 TB] +Data Units Written: 99,595,086 [50.9 TB] +Host Read Commands: 1,374,018,923 +Host Write Commands: 1,599,870,036 +Controller Busy Time: 4,500 +Power Cycles: 2,636 +Power On Hours: 14,196 +Unsafe Shutdowns: 287 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 56 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, 16 of 256 entries) +No Errors Logged + diff --git a/SSD/ADATA/SU630/SU630 480GB/6E4FFF79C63A b/SSD/ADATA/SU630/SU630 480GB/6E4FFF79C63A new file mode 100644 index 000000000..6cce05b99 --- /dev/null +++ b/SSD/ADATA/SU630/SU630 480GB/6E4FFF79C63A @@ -0,0 +1,194 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SU630 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: S190429a +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 13:58:15 2023 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 10477 + 12 Power_Cycle_Count -O--C- 100 100 000 - 903 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 098 098 010 - 24117271 +173 Unknown_Attribute -O--C- 200 200 000 - 21482831906 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 18720 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 62 +194 Temperature_Celsius -O---K 065 065 030 - 35 (Min/Max 1/81) +231 Unknown_SSD_Attribute PO--CK 098 098 005 - 2 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 56895000768 +234 Unknown_Attribute -O--CK 100 100 000 - 27451390656 +241 Total_LBAs_Written -O--CK 100 100 000 - 19875983368 +242 Total_LBAs_Read -O--CK 100 100 000 - 10762472511 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10375 - +# 2 Short offline Completed without error 00% 10375 - +# 3 Extended offline Completed without error 00% 10105 - +# 4 Short offline Completed without error 00% 10105 - +# 5 Extended offline Completed without error 00% 9452 - +# 6 Short offline Completed without error 00% 9452 - +# 7 Extended offline Completed without error 00% 8268 - +# 8 Short offline Completed without error 00% 8268 - +# 9 Extended offline Completed without error 00% 7357 - +#10 Short offline Completed without error 00% 7357 - +#11 Extended offline Completed without error 00% 6444 - +#12 Short offline Completed without error 00% 6444 - +#13 Extended offline Completed without error 00% 5168 - +#14 Short offline Completed without error 00% 5168 - +#15 Short offline Completed without error 00% 4831 - +#16 Extended offline Completed without error 00% 4831 - +#17 Extended offline Completed without error 00% 4447 - +#18 Short offline Completed without error 00% 4447 - +#19 Extended offline Completed without error 00% 2477 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/37 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (368) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 903 --- Lifetime Power-On Resets +0x01 0x010 4 10477 --- Power-on Hours +0x01 0x018 6 19875983368 --- Logical Sectors Written +0x01 0x020 6 653022236 --- Number of Write Commands +0x01 0x028 6 10762472511 --- Logical Sectors Read +0x01 0x030 6 110031520 --- Number of Read Commands +0x01 0x038 6 9658444515340 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SU650/SU650 120GB/01A5C87E03EC b/SSD/ADATA/SU650/SU650 120GB/01A5C87E03EC new file mode 100644 index 000000000..4b1df0910 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/01A5C87E03EC @@ -0,0 +1,329 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU650 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: P190710b +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 21:37:37 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 4894 + 12 Power_Cycle_Count -O--C- 100 100 000 - 7353 +167 Average_Erase_Count -O---K 100 100 000 - 0 +168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 11 +169 Remaining_Lifetime_Perc PO--C- 094 094 010 - 1835022 +173 Unknown_Attribute -O--C- 200 200 000 - 511111069835 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 502 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 5383 +194 Temperature_Celsius -O---K 073 073 030 - 27 (Min/Max 7/57) +231 SSD_Life_Left PO--CK 091 091 005 - 9 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 30769816448 +234 Unknown_Attribute -O--CK 100 100 000 - 32029945856 +241 Host_Writes_32MiB -O--CK 100 100 000 - 12391869596 +242 Host_Reads_32MiB -O--CK 100 100 000 - 14370640083 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 11 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 11 [10] occurred at disk power-on lifetime: 4253 hours (177 days + 5 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 90 00 00 00 00 09 08 40 08 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ef 00 10 00 02 00 00 00 00 00 00 a0 80 00:04:08.800 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 00:04:08.800 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 80 00:04:08.800 SET FEATURES [Set transfer mode] + ef 00 10 00 02 00 00 00 00 00 00 a0 80 00:04:08.800 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 00:04:08.800 IDENTIFY DEVICE + +Error 10 [9] occurred at disk power-on lifetime: 4253 hours (177 days + 5 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 18 00 00 0d e6 5f f8 40 08 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ef 00 10 00 02 00 00 00 00 00 00 a0 80 00:04:07.800 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 00:04:07.800 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 80 00:04:07.800 SET FEATURES [Set transfer mode] + ef 00 10 00 02 00 00 00 00 00 00 a0 80 00:04:07.800 SET FEATURES [Enable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 a0 80 00:04:07.800 IDENTIFY DEVICE + +Error 9 [8] occurred at disk power-on lifetime: 4253 hours (177 days + 5 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 20 00 00 00 00 00 02 40 00 Error: ICRC, ABRT 32 sectors at LBA = 0x00000002 = 2 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 00 20 00 00 00 00 00 02 40 80 00:02:45.100 WRITE DMA EXT + 25 00 00 00 20 00 00 0d f9 4b 8f 40 80 00:02:45.100 READ DMA EXT + 35 00 00 00 01 00 00 00 00 00 01 40 80 00:02:45.100 WRITE DMA EXT + 25 00 00 00 20 00 00 0d f9 4b 8f 40 80 00:02:45.100 READ DMA EXT + 25 00 00 00 01 00 00 0d f9 4b af 40 80 00:02:45.100 READ DMA EXT + +Error 8 [7] occurred at disk power-on lifetime: 4253 hours (177 days + 5 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 08 00 00 05 6b 12 18 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ef 00 02 00 00 00 00 00 00 00 00 00 80 00:16:27.700 SET FEATURES [Enable write cache] + ef 00 02 00 00 00 00 00 00 00 00 00 ff 00:16:27.600 SET FEATURES [Enable write cache] + ef 00 02 00 00 00 00 00 00 00 00 00 80 00:16:27.600 SET FEATURES [Enable write cache] + ef 00 02 00 00 00 00 00 00 00 00 00 ff 00:16:27.600 SET FEATURES [Enable write cache] + ef 00 02 00 00 00 00 00 00 00 00 00 80 00:16:27.600 SET FEATURES [Enable write cache] + +Error 7 [6] occurred at disk power-on lifetime: 2235 hours (93 days + 3 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 80 00:13:21.500 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 80 00:13:21.500 STANDBY IMMEDIATE + ea 00 00 00 00 00 00 00 00 00 00 a0 80 00:13:18.600 FLUSH CACHE EXT + 31 00 f1 00 01 00 00 00 00 00 00 a0 80 00:13:15.000 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 80 00:13:15.000 STANDBY IMMEDIATE + +Error 6 [5] occurred at disk power-on lifetime: 2235 hours (93 days + 3 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 80 00:13:15.000 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 80 00:13:15.000 STANDBY IMMEDIATE + ea 00 00 00 00 00 00 00 00 00 00 a0 80 00:13:13.600 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 00:13:12.600 FLUSH CACHE EXT + 31 00 f1 00 01 00 00 00 00 00 00 a0 80 00:13:05.200 WRITE SECTOR(S) (w/o retry) [OBS-5] + +Error 5 [4] occurred at disk power-on lifetime: 2235 hours (93 days + 3 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 80 00:13:05.200 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 80 00:13:05.200 STANDBY IMMEDIATE + ec 00 00 00 00 00 00 00 00 00 00 a0 80 00:12:46.300 IDENTIFY DEVICE + b0 00 d8 00 01 00 00 00 c2 4f 01 a0 80 00:12:46.300 SMART ENABLE OPERATIONS + ea 00 00 00 00 00 00 00 00 00 00 a0 80 00:12:38.600 FLUSH CACHE EXT + +Error 4 [3] occurred at disk power-on lifetime: 2234 hours (93 days + 2 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 80 00:08:55.000 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 80 00:08:55.000 STANDBY IMMEDIATE + ec 00 00 00 00 00 00 00 00 00 00 a0 80 00:08:47.000 IDENTIFY DEVICE + ea 00 00 00 00 00 00 00 00 00 00 a0 80 00:08:39.300 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 a0 80 00:08:34.200 FLUSH CACHE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 00% 4232 - +# 2 Extended offline Interrupted (host reset) 00% 4228 - +# 3 Short offline Interrupted (host reset) 00% 4221 - +# 4 Short offline Completed without error 00% 4216 - +# 5 Short offline Aborted by host 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/39 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (281) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7353 --- Lifetime Power-On Resets +0x01 0x010 4 4894 --- Power-on Hours +0x01 0x018 6 12391869596 --- Logical Sectors Written +0x01 0x020 6 104599121 --- Number of Write Commands +0x01 0x028 6 14370640083 --- Logical Sectors Read +0x01 0x030 6 160871672 --- Number of Read Commands +0x01 0x038 6 147683812433020 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 11 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apple/SSD SM0128/SSD SM0128F/D0A242ABF8E9 b/SSD/Apple/SSD SM0128/SSD SM0128F/D0A242ABF8E9 new file mode 100644 index 000000000..065f63425 --- /dev/null +++ b/SSD/Apple/SSD SM0128/SSD SM0128F/D0A242ABF8E9 @@ -0,0 +1,89 @@ +smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.2 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128F +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: UXM2JA1Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 15:55:10 2023 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x5f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x001a 200 200 000 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 17911 + 12 Power_Cycle_Count 0x0032 075 075 000 Old_age Always - 24466 +169 Unknown_Apple_Attrib 0x0013 253 253 010 Pre-fail Always - 846280525696 +173 Wear_Leveling_Count 0x0032 163 163 100 Old_age Always - 3500471223209 +174 Host_Reads_MiB 0x0022 099 099 000 Old_age Always - 17884036 +175 Host_Writes_MiB 0x0022 099 099 000 Old_age Always - 56970965 +192 Power-Off_Retract_Count 0x0012 099 099 000 Old_age Always - 132 +194 Temperature_Celsius 0x0022 054 054 000 Old_age Always - 46 (Min/Max 11/63) +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0 +240 Unknown_SSD_Attribute 0x0022 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/China/IM128/IM128-P130/DE373B06AAA5 b/SSD/China/IM128/IM128-P130/DE373B06AAA5 new file mode 100644 index 000000000..e1f083e0c --- /dev/null +++ b/SSD/China/IM128/IM128-P130/DE373B06AAA5 @@ -0,0 +1,163 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IM128-P130 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQJ1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 21:51:20 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9 + 12 Power_Cycle_Count -O--C- 100 100 000 - 48 +161 Unknown_Attribute -O--C- 100 100 000 - 56 +163 Unknown_Attribute PO---- 100 100 050 - 33 +165 Unknown_Attribute ------ 100 100 000 - 2 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 33 +194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 157 +242 Total_LBAs_Read -O--C- 100 100 000 - 20 +249 Unknown_Attribute -O--C- 100 100 000 - 92 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 48 --- Lifetime Power-On Resets +0x01 0x010 4 9 --- Power-on Hours +0x01 0x018 6 329411142 --- Logical Sectors Written +0x01 0x028 6 43529398 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/IT128/IT128-P130/0ED93730262A b/SSD/China/IT128/IT128-P130/0ED93730262A new file mode 100644 index 000000000..30c296a5c --- /dev/null +++ b/SSD/China/IT128/IT128-P130/0ED93730262A @@ -0,0 +1,163 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: IT128-P130 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFQJ1.3 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 20:52:57 2023 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 709 + 12 Power_Cycle_Count -O--C- 100 100 000 - 45 +161 Unknown_Attribute -O--C- 100 100 000 - 55 +163 Unknown_Attribute PO---- 100 100 050 - 36 +165 Unknown_Attribute ------ 100 100 000 - 49 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 26 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 29 +194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 1067 +242 Total_LBAs_Read -O--C- 100 100 000 - 48 +249 Unknown_Attribute -O--C- 100 100 000 - 1246 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 --- Lifetime Power-On Resets +0x01 0x010 4 709 --- Power-on Hours +0x01 0x018 6 2238714342 --- Logical Sectors Written +0x01 0x028 6 102451037 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 16GB/EE79D1DE4730 b/SSD/China/SATA SSD/SATA SSD 16GB/EE79D1DE4730 new file mode 100644 index 000000000..c4d9d2b95 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 16GB/EE79D1DE4730 @@ -0,0 +1,156 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 23:02:14 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1685 + 12 Power_Cycle_Count -O--C- 100 100 000 - 17 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/57 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 107 (Average 66) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 5 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 97 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 823 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 1685 --- Power-on Hours +0x01 0x018 6 1726342898 --- Logical Sectors Written +0x01 0x028 6 35605133 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/5862C6695BA4 b/SSD/China/SATA SSD/SATA SSD 256GB/5862C6695BA4 new file mode 100644 index 000000000..c6f187d9c --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/5862C6695BA4 @@ -0,0 +1,156 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Feb 16 22:39:08 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 1 + 12 Power_Cycle_Count -O--C- 100 100 000 - 5 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/42 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 4 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 1 --- Power-on Hours +0x01 0x018 6 3553151 --- Logical Sectors Written +0x01 0x028 6 1157092 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSD/SSD 256GB/5F0752271692 b/SSD/China/SSD/SSD 256GB/5F0752271692 new file mode 100644 index 000000000..8cd490612 --- /dev/null +++ b/SSD/China/SSD/SSD 256GB/5F0752271692 @@ -0,0 +1,149 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD +Serial Number: -- +Firmware Version: U0409A0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 13 23:07:48 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3 + 12 Power_Cycle_Count -O--CK 100 100 050 - 9 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 11 +164 Unknown_Attribute -O--CK 100 100 050 - 52 +165 Unknown_Attribute -O--CK 100 100 050 - 1 +166 Unknown_Attribute -O--CK 100 100 050 - 0 +167 Unknown_Attribute -O--CK 100 100 050 - 0 +168 Unknown_Attribute -O--CK 100 100 050 - 1500 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 +194 Temperature_Celsius -O---K 100 100 050 - 34 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 142 +242 Total_LBAs_Read ----CK 100 100 050 - 64 +245 Unknown_Attribute -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 3 --- Power-on Hours +0x01 0x018 6 9357357 --- Logical Sectors Written +0x01 0x020 6 113325 --- Number of Write Commands +0x01 0x028 6 4240645 --- Logical Sectors Read +0x01 0x030 6 93255 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/47B031D25A28 b/SSD/Crucial/CT240/CT240BX500SSD1/47B031D25A28 new file mode 100644 index 000000000..c678b3981 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/47B031D25A28 @@ -0,0 +1,145 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR022 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 08:50:51 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 000 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14190 + 12 Power_Cycle_Count -O--CK 100 100 000 - 97 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +173 Ave_Block-Erase_Count -O--CK 012 012 000 - 247 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 82 +180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 227 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 049 022 000 - 51 (Min/Max 37/78) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 088 088 001 - 12 +206 Write_Error_Rate -OSR-- 000 000 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 28330833880 +247 Host_Program_Page_Count -O--CK 100 100 000 - 885338558 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1302552576 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10153 - +# 2 Short offline Completed without error 00% 46 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 97 --- Lifetime Power-On Resets +0x01 0x010 4 14190 --- Power-on Hours +0x01 0x018 6 2561030104 --- Logical Sectors Written +0x01 0x020 6 377775693 --- Number of Write Commands +0x01 0x028 6 185847261 --- Logical Sectors Read +0x01 0x030 6 4938464 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT275/CT275MX300SSD4/FC67AD80BCEE b/SSD/Crucial/CT275/CT275MX300SSD4/FC67AD80BCEE new file mode 100644 index 000000000..bf9adfe86 --- /dev/null +++ b/SSD/Crucial/CT275/CT275MX300SSD4/FC67AD80BCEE @@ -0,0 +1,225 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Crucial_CT275MX300SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR031 +User Capacity: 275,064,201,216 bytes [275 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 15 19:57:53 2023 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 728) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 38346 + 12 Power_Cycle_Count -O--CK 100 100 000 - 189 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 047 047 000 - 802 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 124 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 053 028 000 - 47 (Min/Max 19/72) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 047 047 001 - 53 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 153749186699 +247 Host_Program_Page_Count -O--CK 100 100 000 - 4804662160 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 7503546051 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1249 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 38345 - +# 2 Vendor (0xff) Completed without error 00% 38220 - +# 3 Vendor (0xff) Completed without error 00% 38057 - +# 4 Vendor (0xff) Completed without error 00% 37894 - +# 5 Vendor (0xff) Completed without error 00% 37714 - +# 6 Vendor (0xff) Completed without error 00% 37505 - +# 7 Vendor (0xff) Completed without error 00% 37323 - +# 8 Vendor (0xff) Completed without error 00% 37118 - +# 9 Vendor (0xff) Completed without error 00% 36949 - +#10 Vendor (0xff) Completed without error 00% 36762 - +#11 Vendor (0xff) Completed without error 00% 36606 - +#12 Vendor (0xff) Completed without error 00% 36492 - +#13 Vendor (0xff) Completed without error 00% 36326 - +#14 Vendor (0xff) Completed without error 00% 36157 - +#15 Vendor (0xff) Completed without error 00% 35976 - +#16 Vendor (0xff) Completed without error 00% 35783 - +#17 Vendor (0xff) Completed without error 00% 35596 - +#18 Vendor (0xff) Completed without error 00% 35352 - +#19 Vendor (0xff) Completed without error 00% 35246 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 23/49 Celsius +Lifetime Min/Max Temperature: 19/72 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (351) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 189 --- Lifetime Power-On Resets +0x01 0x010 4 38346 --- Power-on Hours +0x01 0x018 6 153749186699 --- Logical Sectors Written +0x01 0x020 6 2681177715 --- Number of Write Commands +0x01 0x028 6 35409236018 --- Logical Sectors Read +0x01 0x030 6 499197549 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 223 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 49 --- Average Short Term Temperature +0x05 0x018 1 41 --- Average Long Term Temperature +0x05 0x020 1 72 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 35 --- Lowest Average Short Term Temperature +0x05 0x040 1 41 --- Highest Average Long Term Temperature +0x05 0x048 1 41 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 821 --- Number of Hardware Resets +0x06 0x010 4 140 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 53 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 38 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Dogfish/SSD/SSD 128GB/167616B19A4D b/SSD/Dogfish/SSD/SSD 128GB/167616B19A4D new file mode 100644 index 000000000..54b0ea4ab --- /dev/null +++ b/SSD/Dogfish/SSD/SSD 128GB/167616B19A4D @@ -0,0 +1,164 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: DOGFISH SSD 128GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: VE0R6325 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 09:30:38 2023 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x59) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 18 + 12 Power_Cycle_Count -O--CK 100 100 000 - 10 +161 Unknown_Attribute -O--CK 100 100 050 - 0 +162 Unknown_Attribute -O--CK 100 100 000 - 203 +163 Unknown_Attribute -O--CK 100 100 000 - 3000 +164 Unknown_Attribute -O--CK 100 100 000 - 0 +166 Unknown_Attribute -O--CK 100 100 000 - 13 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +169 Unknown_Attribute -O--CK 100 100 000 - 100 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 6 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 3525572 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 45 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +206 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +207 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space -O--CK 100 100 000 - 100 +241 Total_LBAs_Written -O--CK 100 100 000 - 35 +242 Total_LBAs_Read -O--CK 100 100 000 - 123 +249 Unknown_Attribute -O--CK 100 100 000 - 0 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 35 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 5 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 18 --- Power-on Hours +0x01 0x018 6 73788455 --- Logical Sectors Written +0x01 0x020 6 442553 --- Number of Write Commands +0x01 0x028 6 258491251 --- Logical Sectors Read +0x01 0x030 6 2122011 --- Number of Read Commands +0x01 0x038 6 32356827 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Gigabyte/GP-GSTFS3112/GP-GSTFS31120GNTD/CAAF0EAF74B0 b/SSD/Gigabyte/GP-GSTFS3112/GP-GSTFS31120GNTD/CAAF0EAF74B0 new file mode 100644 index 000000000..32611f59d --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3112/GP-GSTFS31120GNTD/CAAF0EAF74B0 @@ -0,0 +1,158 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31120GNTD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM61.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 16:16:40 2023 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16203 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1012 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 064 064 000 - 0/252 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 326 (Average 295) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 306 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 90 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 14938 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1012 --- Lifetime Power-On Resets +0x01 0x010 4 16203 --- Power-on Hours +0x01 0x018 6 31328661301 --- Logical Sectors Written +0x01 0x028 6 62542212327 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/AB528F1EFA23 b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/AB528F1EFA23 new file mode 100644 index 000000000..ccceacb93 --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/AB528F1EFA23 @@ -0,0 +1,162 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31480GNTD +Serial Number: -- +Firmware Version: SBFM61.5 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 13:58:15 2023 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 622 + 12 Power_Cycle_Count -O--C- 100 100 000 - 54 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 000 - 0/201 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 1 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 516 - +# 2 Short offline Completed without error 00% 515 - +# 3 Extended offline Completed without error 00% 234 - +# 4 Short offline Completed without error 00% 234 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 54 --- Lifetime Power-On Resets +0x01 0x010 4 622 --- Power-on Hours +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x028 6 74098 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 266 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/C4B3832D8D1D b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/C4B3832D8D1D new file mode 100644 index 000000000..5ba7820c0 --- /dev/null +++ b/SSD/Gigabyte/GP-GSTFS3148/GP-GSTFS31480GNTD/C4B3832D8D1D @@ -0,0 +1,158 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: GIGABYTE GP-GSTFS31480GNTD +Serial Number: -- +Firmware Version: SBFMLA.5 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 15 10:11:52 2023 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 403 + 12 Power_Cycle_Count -O--C- 100 100 000 - 161 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/158 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 7 (Average 3) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 64 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1901 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 161 --- Lifetime Power-On Resets +0x01 0x010 4 403 --- Power-on Hours +0x01 0x018 6 3988333928 --- Logical Sectors Written +0x01 0x028 6 1130131100 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1046 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/94E236FE0731 b/SSD/Intel/SSDSC2/SSDSC2BW120A4/94E236FE0731 new file mode 100644 index 000000000..37118600e --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/94E236FE0731 @@ -0,0 +1,220 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 21:21:43 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 10430h+14m+57.400s + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 42 +183 SATA_Downshift_Count -O--CK 100 100 000 - 15 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 029 052 000 - 29 (Min/Max 8/52) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 42 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 463933 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 43 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 075 075 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 463933 +242 Host_Reads_32MiB -O--CK 100 100 000 - 350973 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 91225 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 10409 - +# 2 Offline Interrupted (host reset) 10% 8930 - +# 3 Offline Interrupted (host reset) 10% 8930 - +# 4 Offline Interrupted (host reset) 10% 8930 - +# 5 Offline Interrupted (host reset) 10% 8930 - +# 6 Offline Interrupted (host reset) 10% 8930 - +# 7 Offline Interrupted (host reset) 10% 8930 - +# 8 Offline Interrupted (host reset) 10% 8930 - +# 9 Offline Interrupted (host reset) 10% 8930 - +#10 Offline Interrupted (host reset) 10% 8930 - +#11 Offline Interrupted (host reset) 10% 8930 - +#12 Offline Interrupted (host reset) 10% 8930 - +#13 Offline Interrupted (host reset) 10% 8342 - +#14 Offline Interrupted (host reset) 10% 8342 - +#15 Offline Interrupted (host reset) 10% 8342 - +#16 Offline Interrupted (host reset) 10% 8342 - +#17 Offline Interrupted (host reset) 10% 7305 - +#18 Offline Interrupted (host reset) 10% 7179 - +#19 Offline Interrupted (host reset) 10% 6776 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 8/52 Celsius +Lifetime Min/Max Temperature: 8/78 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (398) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 60 --- Lifetime Power-On Resets +0x01 0x010 4 10434 --- Power-on Hours +0x01 0x018 6 30422659602 --- Logical Sectors Written +0x01 0x028 6 23018176585 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 364 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 25 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 364 --- Number of Hardware Resets +0x06 0x010 4 19 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 26 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW120A4/96BDBB914D8A b/SSD/Intel/SSDSC2/SSDSC2BW120A4/96BDBB914D8A new file mode 100644 index 000000000..3a9a345fa --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW120A4/96BDBB914D8A @@ -0,0 +1,220 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW120A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: DC32 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 12:35:40 2023 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 20726h+56m+14.370s + 12 Power_Cycle_Count -O--CK 100 100 000 - 414 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 143 +183 SATA_Downshift_Count -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 032 044 000 - 32 (Min/Max 13/44) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 143 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 243054 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 51 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 081 081 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 243054 +242 Host_Reads_32MiB -O--CK 100 100 000 - 259182 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 61406 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 20672 - +# 2 Offline Interrupted (host reset) 10% 20672 - +# 3 Offline Interrupted (host reset) 10% 20672 - +# 4 Offline Interrupted (host reset) 10% 20672 - +# 5 Offline Interrupted (host reset) 10% 20672 - +# 6 Offline Interrupted (host reset) 10% 20672 - +# 7 Offline Interrupted (host reset) 10% 20672 - +# 8 Offline Interrupted (host reset) 10% 20672 - +# 9 Offline Interrupted (host reset) 10% 20672 - +#10 Offline Interrupted (host reset) 10% 20672 - +#11 Offline Interrupted (host reset) 10% 20671 - +#12 Offline Interrupted (host reset) 10% 20671 - +#13 Offline Interrupted (host reset) 10% 20671 - +#14 Offline Interrupted (host reset) 10% 20665 - +#15 Offline Interrupted (host reset) 10% 20665 - +#16 Offline Interrupted (host reset) 10% 20665 - +#17 Offline Interrupted (host reset) 10% 20665 - +#18 Offline Interrupted (host reset) 10% 20635 - +#19 Offline Interrupted (host reset) 10% 20419 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 13/44 Celsius +Lifetime Min/Max Temperature: 13/76 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (472) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 420 --- Lifetime Power-On Resets +0x01 0x010 4 20730 --- Power-on Hours +0x01 0x018 6 15947142555 --- Logical Sectors Written +0x01 0x028 6 17002538980 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 953 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 953 --- Number of Hardware Resets +0x06 0x010 4 572 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT120A3/D4B63477A82D b/SSD/Intel/SSDSC2/SSDSC2CT120A3/D4B63477A82D new file mode 100644 index 000000000..3b0d901ab --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT120A3/D4B63477A82D @@ -0,0 +1,176 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT120A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 300i +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 21:42:12 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 903672h+25m+15.900s + 12 Power_Cycle_Count -O--CK 100 100 000 - 312 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 30 +225 Host_Writes_32MiB -O--CK 100 100 000 - 38468 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 38468 +242 Host_Reads_32MiB -O--CK 100 100 000 - 33872 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 1234 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (57) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 324 --- Lifetime Power-On Resets +0x01 0x010 4 8878 --- Power-on Hours +0x01 0x018 6 3417434542 --- Logical Sectors Written +0x01 0x028 6 3335527564 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8089 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8089 --- Number of Hardware Resets +0x06 0x010 4 7807 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Kingston/SA400/SA400S37240G/EA9B3DECF8EF b/SSD/Kingston/SA400/SA400S37240G/EA9B3DECF8EF new file mode 100644 index 000000000..c1e59d5ce --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/EA9B3DECF8EF @@ -0,0 +1,146 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: S1Z40102 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 20:30:46 2023 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 19672 + 12 Power_Cycle_Count -O--CK 100 100 000 - 138 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 102 +194 Temperature_Celsius -O---K 039 063 000 - 39 (Min/Max 28/63) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 084 084 000 - 84 +233 Flash_Writes_GiB -O--CK 100 100 000 - 13454 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 19382 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1510 +244 Average_Erase_Count ------ 100 100 000 - 162 +245 Max_Erase_Count ------ 100 100 000 - 199 +246 Total_Erase_Count ------ 100 100 000 - 69495 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 745 - +# 2 Short offline Completed without error 00% 295 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 138 --- Lifetime Power-On Resets +0x01 0x010 4 19672 --- Power-on Hours +0x01 0x018 6 1994216714 --- Logical Sectors Written +0x01 0x020 6 69594090 --- Number of Write Commands +0x01 0x028 6 3168317144 --- Logical Sectors Read +0x01 0x030 6 667360 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 28 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 23 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SA400/SA400S37480G/3DB5FEA80BF6 b/SSD/Kingston/SA400/SA400S37480G/3DB5FEA80BF6 new file mode 100644 index 000000000..4d97722f9 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37480G/3DB5FEA80BF6 @@ -0,0 +1,144 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37480G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SAN20102 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 22:12:45 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 8 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius -O---K 033 033 000 - 33 (Min/Max 19/33) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 2 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 2 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 0 +244 Average_Erase_Count ------ 100 100 000 - 0 +245 Max_Erase_Count ------ 100 100 000 - 0 +246 Total_Erase_Count ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 8 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 4671402 --- Logical Sectors Written +0x01 0x020 6 44507 --- Number of Write Commands +0x01 0x028 6 681406 --- Logical Sectors Read +0x01 0x030 6 14064 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SUV500/SUV500MS480G/F9975695BA85 b/SSD/Kingston/SUV500/SUV500MS480G/F9975695BA85 new file mode 100644 index 000000000..594937408 --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS480G/F9975695BA85 @@ -0,0 +1,209 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Kingston SSDNow UV400/500 +Device Model: KINGSTON SUV500MS480G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: mSATA +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Feb 14 13:58:15 2023 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 141771 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12726 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1052 +100 Unknown_Kingston_Attr -O--CK 100 100 000 - 12863904 +101 Unknown_Kingston_Attr -O--CK 100 100 000 - 543008 +170 Reserved_Block_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 65 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 086 086 000 - 4466 +178 Used_Rsvd_Blk_Cnt_Chip -O---- 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O---- 100 100 000 - 1454 +183 Runtime_Bad_Block -O--CK 097 097 000 - 12 +187 Reported_Uncorrect PO--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 041 100 000 - 41 (Min/Max 15/64) +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 141771 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +201 Unc_Read_Error_Rate -O--CK 100 100 000 - 0 +204 Soft_ECC_Correction -O--CK 100 100 000 - 141771 +231 SSD_Life_Left -O--CK 086 086 000 - 14 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 43985 +234 Unknown_Attribute -O--CK 100 100 000 - 6364 +241 Host_Writes_GiB -O--CK 100 100 000 - 11116 +242 Host_Reads_GiB -O--CK 100 100 000 - 6273 +250 Read_Retry_Count -O--CK 100 100 000 - 141787 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 5 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 9 Device vendor specific log +0xab SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 19/43 Celsius +Lifetime Min/Max Temperature: 15/64 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (468) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1052 --- Lifetime Power-On Resets +0x01 0x010 4 12726 --- Power-on Hours +0x01 0x018 6 23313457359 --- Logical Sectors Written +0x01 0x020 6 762617847 --- Number of Write Commands +0x01 0x028 6 13156527772 --- Logical Sectors Read +0x01 0x030 6 118636981 --- Number of Read Commands +0x01 0x038 6 45813785280 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5180 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 -D- Current Temperature +0x05 0x010 1 - -D- Average Short Term Temperature +0x05 0x018 1 0 -D- Average Long Term Temperature +0x05 0x020 1 64 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 - -D- Highest Average Short Term Temperature +0x05 0x038 1 - -D- Lowest Average Short Term Temperature +0x05 0x040 1 - -D- Highest Average Long Term Temperature +0x05 0x048 1 - -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5180 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SV300/SV300S37A120G/A9B2DBA9D7D2 b/SSD/Kingston/SV300/SV300S37A120G/A9B2DBA9D7D2 new file mode 100644 index 000000000..86682834d --- /dev/null +++ b/SSD/Kingston/SV300/SV300S37A120G/A9B2DBA9D7D2 @@ -0,0 +1,201 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SV300S37A120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 600ABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: In smartctl database 7.3/5319 +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 22:40:00 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 069 069 000 - 27928h+27m+04.530s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1574 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 311 +177 Wear_Range_Delta ------ 000 000 000 - 97 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 019 045 000 - 19 (Min/Max 12/45) +194 Temperature_Celsius -O---K 019 045 000 - 19 (Min/Max 12/45) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 095 095 011 - 1 +233 SandForce_Internal -O--CK 000 000 000 - 24519 +234 SandForce_Internal -O--CK 000 000 000 - 15013 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 15013 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 6413 +244 Unknown_Attribute ------ 094 094 010 - 196739272 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 19 Celsius +Power Cycle Min/Max Temperature: 12/45 Celsius +Lifetime Min/Max Temperature: 12/62 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (364) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1574 --- Lifetime Power-On Resets +0x01 0x010 4 27928 --- Power-on Hours +0x01 0x018 6 31485615491 --- Logical Sectors Written +0x01 0x028 6 13450285587 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 539 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 19 --- Current Temperature +0x05 0x010 1 18 --- Average Short Term Temperature +0x05 0x018 1 21 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 17 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 5697 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 6 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 17 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Micron/M600/M600_MTFDDAK128MBF/9CFF242A5BC8 b/SSD/Micron/M600/M600_MTFDDAK128MBF/9CFF242A5BC8 new file mode 100644 index 000000000..ce1b5915f --- /dev/null +++ b/SSD/Micron/M600/M600_MTFDDAK128MBF/9CFF242A5BC8 @@ -0,0 +1,201 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron Client SSDs +Device Model: Micron_M600_MTFDDAK128MBF +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU04 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Feb 13 21:04:44 2023 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 411) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 39068 + 12 Power_Cycle_Count -O--CK 100 100 000 - 51 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 060 060 000 - 1209 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 37 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 862 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 058 000 - 34 (Min/Max 17/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 060 060 001 - 40 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 48665427476 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1521007647 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 5707204394 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39063 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Completed [00% left] (57881389-57946924) + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 32/35 Celsius +Lifetime Min/Max Temperature: 17/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (260) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 51 --- Lifetime Power-On Resets +0x01 0x010 4 39068 --- Power-on Hours +0x01 0x018 6 48665427476 --- Logical Sectors Written +0x01 0x020 6 644674897 --- Number of Write Commands +0x01 0x028 6 11971794631 --- Logical Sectors Read +0x01 0x030 6 123087452 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 44 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 32 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 321 --- Number of Hardware Resets +0x06 0x010 4 73 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 40 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/MyDigitalSSD/SB/SB2/EC71F039FA69 b/SSD/MyDigitalSSD/SB/SB2/EC71F039FA69 new file mode 100644 index 000000000..f971f2dce --- /dev/null +++ b/SSD/MyDigitalSSD/SB/SB2/EC71F039FA69 @@ -0,0 +1,155 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SB2 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM11.0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 04:13:11 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 16626 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2500 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 055 055 010 - 434 +173 Unknown_Attribute -O--C- 100 100 000 - 7209103 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 148 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 89 +241 Total_LBAs_Written -O--C- 100 100 000 - 11445 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2500 --- Lifetime Power-On Resets +0x01 0x010 4 16626 --- Power-on Hours +0x01 0x018 6 24001911821 --- Logical Sectors Written +0x01 0x028 6 39818579243 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/MZ7/MZ7L3240HCHQ-00A07 240GB/68778A73AAD4 b/SSD/Samsung/MZ7/MZ7L3240HCHQ-00A07 240GB/68778A73AAD4 new file mode 100644 index 000000000..7ec2c1b0a --- /dev/null +++ b/SSD/Samsung/MZ7/MZ7L3240HCHQ-00A07 240GB/68778A73AAD4 @@ -0,0 +1,208 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG MZ7L3240HCHQ-00A07 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: JXTC304Q +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic, zeroed +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Feb 14 12:33:49 2023 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 25) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 201 + 12 Power_Cycle_Count -O--CK 099 099 000 - 10 +177 Wear_Leveling_Count PO--C- 099 099 005 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 222 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 057 052 000 - 43 +194 Temperature_Celsius -O---K 057 052 000 - 43 (Min/Max 26/48) +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 +235 Unknown_Attribute -O--C- 099 099 000 - 5 +241 Total_LBAs_Written -O--CK 099 099 000 - 360978890 +242 Total_LBAs_Read -O--CK 099 099 000 - 1783221 +243 Unknown_Attribute -O--CK 100 100 000 - 0 +244 Unknown_Attribute -O--CK 100 100 000 - 0 +245 Unknown_Attribute -O--CK 100 100 000 - 65535 +246 Unknown_Attribute -O--CK 100 100 000 - 65535 +247 Unknown_Attribute -O--CK 100 100 000 - 65535 +251 Unknown_Attribute -O--CK 100 100 000 - 430262912 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 26/45 Celsius +Lifetime Min/Max Temperature: 26/48 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (62) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 201 --- Power-on Hours +0x01 0x018 6 360978890 --- Logical Sectors Written +0x01 0x020 6 12504689 --- Number of Write Commands +0x01 0x028 6 1783221 --- Logical Sectors Read +0x01 0x030 6 85115 --- Number of Read Commands +0x01 0x038 6 838000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 49 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/MZMPC032/MZMPC032HBCD-000L1/C7D0CDE6401B b/SSD/Samsung/MZMPC032/MZMPC032HBCD-000L1/C7D0CDE6401B new file mode 100644 index 000000000..6e9e33697 --- /dev/null +++ b/SSD/Samsung/MZMPC032/MZMPC032HBCD-000L1/C7D0CDE6401B @@ -0,0 +1,147 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MZMPC032HBCD-000L1 +Serial Number: -- +Firmware Version: CXM13L1Q +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +TRIM Command: Available +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Feb 17 16:16:41 2023 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 180) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 098 098 000 - 8319 + 12 Power_Cycle_Count -O--CK 095 095 000 - 4343 +175 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--C- 093 093 017 - 243 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 089 089 010 - 44 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 092 092 010 - 58 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 092 092 010 - 758 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 059 041 000 - 41 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 +233 Media_Wearout_Indicator -O-RCK 198 198 000 - 311 +234 Unknown_Attribute -O--C- 100 100 000 - 0 +235 Unknown_Attribute -O--C- 099 099 000 - 74 +236 Unknown_Attribute -O--C- 099 099 000 - 82 +237 Unknown_Attribute -O--C- 099 099 000 - 243 +238 Unknown_Attribute -O--C- 099 099 000 - 58 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 2 Comprehensive SMART error log +0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 414 - +# 2 Short offline Completed without error 00% 184 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 49152 R_ERR response for data FIS +0x0003 2 53248 R_ERR response for device-to-host data FIS +0x0004 2 57344 R_ERR response for host-to-device data FIS +0x0005 2 7952 R_ERR response for non-data FIS +0x0006 2 2562 R_ERR response for device-to-host non-data FIS +0x0007 2 4096 R_ERR response for host-to-device non-data FIS +0x0008 2 7952 Device-to-host non-data FIS retries +0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23857 Device-to-host register FISes sent due to a COMRESET +0x000b 2 6145 CRC errors within host-to-device FIS +0x000d 2 7953 Non-CRC errors within host-to-device FIS +0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC +0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/E6918F2B84ED b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/E6918F2B84ED new file mode 100644 index 000000000..0178859f7 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/E6918F2B84ED @@ -0,0 +1,168 @@ +smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) +Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 15 14:36:16 2023 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 14451 + 12 Power_Cycle_Count -O--CK 099 099 000 - 844 +177 Wear_Leveling_Count PO--C- 097 097 000 - 58 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 074 061 000 - 26 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 4 +241 Total_LBAs_Written -O--CK 099 099 000 - 30839925486 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 20/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO M.2 1TB/2A955E317300 b/SSD/Samsung/SSD 860/SSD 860 EVO M.2 1TB/2A955E317300 new file mode 100644 index 000000000..563a7919d --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO M.2 1TB/2A955E317300 @@ -0,0 +1,196 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO M.2 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT24B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic, zeroed +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Feb 16 18:39:34 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 4422 + 12 Power_Cycle_Count -O--CK 099 099 000 - 15 +177 Wear_Leveling_Count PO--C- 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 060 054 000 - 40 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 9 +241 Total_LBAs_Written -O--CK 099 099 000 - 1098385632 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 37/46 Celsius +Lifetime Min/Max Temperature: 26/46 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (62) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 4422 --- Power-on Hours +0x01 0x018 6 1098385632 --- Logical Sectors Written +0x01 0x020 6 19671188 --- Number of Write Commands +0x01 0x028 6 12345014 --- Logical Sectors Read +0x01 0x030 6 278924 --- Number of Read Commands +0x01 0x038 6 1480000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 9 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 66 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 31 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 31 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/SanDisk/WD Green 2/WD Green 2.5 240GB/908A2BFAF454 b/SSD/SanDisk/WD Green 2/WD Green 2.5 240GB/908A2BFAF454 new file mode 100644 index 000000000..418dc1b61 --- /dev/null +++ b/SSD/SanDisk/WD Green 2/WD Green 2.5 240GB/908A2BFAF454 @@ -0,0 +1,157 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WD Green 2.5 240GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 42051100 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +TRIM Command: Available, deterministic +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-4, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Feb 15 01:19:04 2023 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15 +165 Unknown_Attribute -O--CK 100 100 000 - 65536 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 14 +168 Unknown_Attribute -O--CK 100 100 000 - 1 +169 Unknown_Attribute -O--CK 100 100 000 - 76 +170 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute -O--CK 100 100 005 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 014 - 26 (Min/Max 24/31) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +232 Available_Reservd_Space PO--CK 100 100 000 - 97 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Unknown_Attribute -O--CK 100 100 000 - 8 +241 Total_LBAs_Written ----CK 253 253 000 - 3 +242 Total_LBAs_Read ----CK 253 253 000 - 0 +244 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa7 GPL,SL VS 1 Device vendor specific log +0xde GPL,SL VS 1 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (empty) == +0x05 ===== = = === == Temperature Statistics (empty) == +0x07 ===== = = === == Solid State Device Statistics (empty) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/WDC/WDS120/WDS120G2G0B-00EPW0/058DB11A9F90 b/SSD/WDC/WDS120/WDS120G2G0B-00EPW0/058DB11A9F90 new file mode 100644 index 000000000..7d2722e33 --- /dev/null +++ b/SSD/WDC/WDS120/WDS120G2G0B-00EPW0/058DB11A9F90 @@ -0,0 +1,322 @@ +smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue / Red / Green SSDs +Device Model: WDC WDS120G2G0B-00EPW0 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UI510000 +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +TRIM Command: Available, deterministic +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Feb 17 21:37:37 2023 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3525 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1397 +165 Block_Erase_Count -O--CK 100 100 000 - 2213 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 19 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 51 +169 Total_Bad_Blocks -O--CK 100 100 --- - 320 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 19 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 128 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 066 040 000 - 34 (Min/Max 0/40) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x062003500620 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 2228 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 12314 +241 Host_Writes_GiB ----CK 100 100 000 - 5268 +242 Host_Reads_GiB ----CK 100 100 000 - 4313 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +Device Error Count: 14 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 14 [3] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands] + +Error 13 [2] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands] + +Error 12 [1] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands] + +Error 11 [0] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands] + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 10 [63] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands] + +Error 9 [62] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands] + +Error 8 [61] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands] + +Error 7 [60] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2803 - +# 2 Extended offline Interrupted (host reset) 60% 2800 - +# 3 Short offline Completed without error 00% 2790 - +# 4 Short offline Completed without error 00% 2784 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1397 --- Lifetime Power-On Resets +0x01 0x010 4 3525 --- Power-on Hours +0x01 0x018 6 11048163713 --- Logical Sectors Written +0x01 0x028 6 9046775210 --- Logical Sectors Read +0x01 0x038 6 3525 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + +