mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 0, modified: 1434)
This commit is contained in:
Andrey Ponomarenko
@@ -1,4 +1,4 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
@@ -13,19 +13,14 @@ Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Tue Feb 1 22:41:01 2022 CET
|
||||
Local Time is: Mon Feb 21 13:42:24 2022 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 208 (intermediate), recommended: 208
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
@@ -64,217 +59,135 @@ SCT capabilities: (0x103f) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 116 084 006 - 109036055
|
||||
3 Spin_Up_Time PO---- 100 098 085 - 0
|
||||
4 Start_Stop_Count -O--CK 037 037 020 - 65535
|
||||
5 Reallocated_Sector_Ct PO--CK 098 098 036 - 49
|
||||
7 Seek_Error_Rate POSR-- 070 060 030 - 103396291735
|
||||
9 Power_On_Hours -O--CK 098 098 000 - 1804
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 090 037 020 - 10584
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 14726
|
||||
188 Command_Timeout -O--CK 100 099 000 - 4295032904
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 051 039 045 Past 49 (Min/Max 46/49 #973)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1642
|
||||
192 Power-Off_Retract_Count -O--CK 099 099 000 - 3868
|
||||
193 Load_Cycle_Count -O--CK 030 030 000 - 140413
|
||||
194 Temperature_Celsius -O---K 049 061 000 - 49 (0 13 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 047 034 000 - 109036055
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
240 Head_Flying_Hours ------ 100 253 000 - 4230 (102 18 0)
|
||||
241 Total_LBAs_Written ------ 100 253 000 - 503227876
|
||||
242 Total_LBAs_Read ------ 100 253 000 - 3524793591
|
||||
254 Free_Fall_Sensor -O--CK 001 001 000 - 3255
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x000f 117 084 006 Pre-fail Always - 118551424
|
||||
3 Spin_Up_Time 0x0003 100 098 085 Pre-fail Always - 0
|
||||
4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
|
||||
5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always - 49
|
||||
7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 103397225628
|
||||
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1845
|
||||
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
||||
12 Power_Cycle_Count 0x0032 090 037 020 Old_age Always - 10642
|
||||
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 14726
|
||||
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032904
|
||||
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
||||
190 Airflow_Temperature_Cel 0x0022 074 039 045 Old_age Always In_the_past 26 (3 205 26 23 0)
|
||||
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1642
|
||||
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 3890
|
||||
193 Load_Cycle_Count 0x0032 030 030 000 Old_age Always - 141496
|
||||
194 Temperature_Celsius 0x0022 026 061 000 Old_age Always - 26 (0 13 0 0 0)
|
||||
195 Hardware_ECC_Recovered 0x001a 047 034 000 Old_age Always - 118551424
|
||||
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
||||
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4270 (188 103 0)
|
||||
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 978540805
|
||||
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1454474014
|
||||
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 3255
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 65 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2864 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 14444 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 14444 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 14444 [3] occurred at disk power-on lifetime: 1064 hours (44 days + 8 hours)
|
||||
Error 14444 occurred at disk power-on lifetime: 1064 hours (44 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: UNC at LBA = 0x023e7873 = 37648499
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 78 3e 02 Error: UNC at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 01 00 00 02 3e 78 73 40 00 00:35:56.325 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 72 40 00 00:35:56.324 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 71 40 00 00:35:56.324 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 70 40 00 00:35:56.324 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 6f 40 00 00:35:56.323 READ FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 00 01 73 78 3e 42 00 00:35:56.325 READ FPDMA QUEUED
|
||||
60 00 01 72 78 3e 42 00 00:35:56.324 READ FPDMA QUEUED
|
||||
60 00 01 71 78 3e 42 00 00:35:56.324 READ FPDMA QUEUED
|
||||
60 00 01 70 78 3e 42 00 00:35:56.324 READ FPDMA QUEUED
|
||||
60 00 01 6f 78 3e 42 00 00:35:56.323 READ FPDMA QUEUED
|
||||
|
||||
Error 14443 [2] occurred at disk power-on lifetime: 1064 hours (44 days + 8 hours)
|
||||
Error 14443 occurred at disk power-on lifetime: 1064 hours (44 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: UNC at LBA = 0x023e7873 = 37648499
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 78 3e 02 Error: UNC at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 60 00 00 02 3e 79 60 40 00 00:35:53.546 READ FPDMA QUEUED
|
||||
60 00 00 01 00 00 00 02 3e 78 60 40 00 00:35:53.545 READ FPDMA QUEUED
|
||||
60 00 00 01 00 00 00 02 3e 77 60 40 00 00:35:53.545 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 0c 1b 74 28 40 00 00:35:53.525 READ FPDMA QUEUED
|
||||
61 00 00 00 38 00 00 0c 44 7c 78 40 00 00:35:53.521 WRITE FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 00 60 60 79 3e 42 00 00:35:53.546 READ FPDMA QUEUED
|
||||
60 00 00 60 78 3e 42 00 00:35:53.545 READ FPDMA QUEUED
|
||||
60 00 00 60 77 3e 42 00 00:35:53.545 READ FPDMA QUEUED
|
||||
60 00 08 28 74 1b 4c 00 00:35:53.525 READ FPDMA QUEUED
|
||||
61 00 38 78 7c 44 4c 00 00:35:53.521 WRITE FPDMA QUEUED
|
||||
|
||||
Error 14442 [1] occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
Error 14442 occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 78 3e 02 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 10 00 00 00 5e fc e0 40 00 00:40:26.547 WRITE FPDMA QUEUED
|
||||
60 00 00 00 38 00 00 00 09 a2 90 40 00 00:40:26.546 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 00 03 39 90 40 00 00:40:26.545 WRITE FPDMA QUEUED
|
||||
60 00 00 00 40 00 00 00 09 6a 40 40 00 00:40:26.545 READ FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 0a 43 28 20 40 00 00:40:26.544 WRITE FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
61 00 10 e0 fc 5e 40 00 00:40:26.547 WRITE FPDMA QUEUED
|
||||
60 00 38 90 a2 09 40 00 00:40:26.546 READ FPDMA QUEUED
|
||||
61 00 08 90 39 03 40 00 00:40:26.545 WRITE FPDMA QUEUED
|
||||
60 00 40 40 6a 09 40 00 00:40:26.545 READ FPDMA QUEUED
|
||||
61 00 20 20 28 43 4a 00 00:40:26.544 WRITE FPDMA QUEUED
|
||||
|
||||
Error 14441 [0] occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
Error 14441 occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 78 3e 02 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 80 00 00 00 60 b7 c0 40 00 00:40:23.869 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 08 c7 52 20 40 00 00:40:23.866 WRITE FPDMA QUEUED
|
||||
60 00 00 00 30 00 00 00 0b cd 80 40 00 00:40:23.865 READ FPDMA QUEUED
|
||||
60 00 00 00 38 00 00 00 09 a2 90 40 00 00:40:23.865 READ FPDMA QUEUED
|
||||
60 00 00 00 30 00 00 00 0b cd a8 40 00 00:40:23.864 READ FPDMA QUEUED
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
61 00 80 c0 b7 60 40 00 00:40:23.869 WRITE FPDMA QUEUED
|
||||
61 00 40 20 52 c7 48 00 00:40:23.866 WRITE FPDMA QUEUED
|
||||
60 00 30 80 cd 0b 40 00 00:40:23.865 READ FPDMA QUEUED
|
||||
60 00 38 90 a2 09 40 00 00:40:23.865 READ FPDMA QUEUED
|
||||
60 00 30 a8 cd 0b 40 00 00:40:23.864 READ FPDMA QUEUED
|
||||
|
||||
Error 14440 [19] occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
Error 14440 occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 78 3e 02 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 20 00 00 00 5e fd 78 40 00 00:39:53.564 WRITE FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 73 40 00 00:39:53.563 READ FPDMA QUEUED
|
||||
61 00 00 00 10 00 00 00 03 4f f0 40 00 00:39:53.562 WRITE FPDMA QUEUED
|
||||
ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:39:53.562 SET FEATURES [Enable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:39:53.549 SET FEATURES [Enable write cache]
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
61 00 20 78 fd 5e 40 00 00:39:53.564 WRITE FPDMA QUEUED
|
||||
60 00 01 73 78 3e 42 00 00:39:53.563 READ FPDMA QUEUED
|
||||
61 00 10 f0 4f 03 40 00 00:39:53.562 WRITE FPDMA QUEUED
|
||||
ef 10 03 00 00 00 a0 00 00:39:53.562 SET FEATURES [Enable SATA feature]
|
||||
ef 02 00 00 00 00 a0 00 00:39:53.549 SET FEATURES [Enable write cache]
|
||||
|
||||
Error 14439 [18] occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: UNC at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 01 00 00 02 3e 78 73 40 00 00:39:50.803 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 72 40 00 00:39:50.799 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 71 40 00 00:39:50.784 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 70 40 00 00:39:50.774 READ FPDMA QUEUED
|
||||
60 00 00 00 01 00 00 02 3e 78 6f 40 00 00:39:50.768 READ FPDMA QUEUED
|
||||
|
||||
Error 14438 [17] occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 10 00 00 00 03 4f f0 40 00 00:39:46.335 WRITE FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 0b 25 b0 c0 40 00 00:39:46.334 WRITE FPDMA QUEUED
|
||||
61 00 00 00 38 00 00 00 63 0f 70 40 00 00:39:46.334 WRITE FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 04 89 e9 68 40 00 00:39:46.333 WRITE FPDMA QUEUED
|
||||
60 00 00 00 80 00 00 09 2b ed 40 40 00 00:39:46.332 READ FPDMA QUEUED
|
||||
|
||||
Error 14437 [16] occurred at disk power-on lifetime: 1041 hours (43 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 02 3e 78 73 00 00 Error: WP at LBA = 0x023e7873 = 37648499
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 20 00 00 12 0f e3 80 40 00 00:39:16.366 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 03 4b bc 70 40 00 00:39:16.365 WRITE FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 0f 2b 63 60 40 00 00:39:16.364 WRITE FPDMA QUEUED
|
||||
61 00 00 00 58 00 00 10 cb 1e 68 40 00 00:39:16.364 WRITE FPDMA QUEUED
|
||||
61 00 00 00 28 00 00 09 d3 5e 18 40 00 00:39:16.312 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1217 -
|
||||
# 2 Short offline Completed without error 00% 732 -
|
||||
@@ -296,36 +209,5 @@ Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 49 Celsius
|
||||
Power Cycle Min/Max Temperature: 46/49 Celsius
|
||||
Lifetime Min/Max Temperature: 13/61 Celsius
|
||||
Specified Max Operating Temperature: 39 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 14/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (29)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
Reference in New Issue
Block a user