80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 51, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2023-05-11 09:39:12 +03:00
parent 10d3a0272e
commit 26d4b75067
51 changed files with 8305 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

306
HDD/Samsung/HD251/HD251HJ/D1F4A5274B8F Normal file
View File

@@ -0,0 +1,306 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD251HJ
Serial Number: --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: 1AC01113
User Capacity: 250,058,268,160 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Fri May 5 08:26:48 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3534) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
Conveyance self-test routine
recommended polling time: ( 7) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 094 094 011 - 2670
4 Start_Stop_Count -O--CK 098 098 000 - 1827
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 095 095 000 - 27273
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 1778
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 070 062 000 - 30 (Min/Max 30/31)
194 Temperature_Celsius -O---K 070 060 000 - 30 (Min/Max 30/31)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 358
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 5
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 2 Write stream error log
0x22 GPL R/O 2 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 7
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 [6] occurred at disk power-on lifetime: 18526 hours (771 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 00 00 00 02 b6 bc dc e2 00 at LBA = 0x02b6bcdc = 45530332
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 00 00 00 00 b6 bc dc e2 02 00:29:28.050 WRITE DMA
ca 00 00 00 df 00 00 00 b6 bb fd e2 02 00:29:28.050 WRITE DMA
ca 00 00 00 00 00 00 00 b6 ba fd e2 02 00:29:28.050 WRITE DMA
ca 00 00 00 00 00 00 00 b6 b9 fd e2 02 00:29:28.050 WRITE DMA
ca 00 00 00 00 00 00 00 b6 b8 fd e2 02 00:29:28.040 WRITE DMA
Error 6 [5] occurred at disk power-on lifetime: 17503 hours (729 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 00 00 00 03 07 06 35 e3 00 at LBA = 0x03070635 = 50791989
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 00 00 00 00 07 06 35 e3 02 17d+22:43:06.010 WRITE DMA
ca 00 00 00 00 00 00 00 07 05 35 e3 02 17d+22:43:06.010 WRITE DMA
ea 00 00 00 00 00 00 00 00 00 00 40 02 17d+22:43:01.160 FLUSH CACHE EXT
35 00 00 00 02 00 00 1c dd af c0 40 02 17d+22:43:01.160 WRITE DMA EXT
35 00 00 00 02 00 00 1c dd ad c0 40 02 17d+22:43:01.160 WRITE DMA EXT
Error 5 [4] occurred at disk power-on lifetime: 16790 hours (699 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 00 00 00 02 36 e6 e6 e2 00 at LBA = 0x0236e6e6 = 37152486
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 00 00 00 00 36 e6 e6 e2 02 6d+23:34:15.810 WRITE DMA
ca 00 00 00 00 00 00 00 36 e5 e6 e2 02 6d+23:34:15.810 WRITE DMA
ca 00 00 00 00 00 00 00 36 e4 e6 e2 02 6d+23:34:15.810 WRITE DMA
ca 00 00 00 00 00 00 00 36 e3 e6 e2 02 6d+23:34:15.810 WRITE DMA
ca 00 00 00 00 00 00 00 36 e2 e6 e2 02 6d+23:34:15.810 WRITE DMA
Error 4 [3] occurred at disk power-on lifetime: 16790 hours (699 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 00 00 00 02 34 70 aa e2 00 at LBA = 0x023470aa = 36991146
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 00 00 00 00 34 70 aa e2 02 6d+23:34:14.440 WRITE DMA
ca 00 00 00 00 00 00 00 34 6f aa e2 02 6d+23:34:14.440 WRITE DMA
ca 00 00 00 00 00 00 00 34 6e aa e2 02 6d+23:34:14.440 WRITE DMA
ca 00 00 00 00 00 00 00 34 6d aa e2 02 6d+23:34:14.440 WRITE DMA
ca 00 00 00 00 00 00 00 34 6c aa e2 02 6d+23:34:14.430 WRITE DMA
Error 3 [2] occurred at disk power-on lifetime: 16790 hours (699 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 00 00 00 02 2a ce 0b e2 00 at LBA = 0x022ace0b = 36359691
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 00 00 00 00 2a ce 0b e2 02 6d+23:34:08.440 WRITE DMA
ca 00 00 00 00 00 00 00 2a cd 0b e2 02 6d+23:34:08.440 WRITE DMA
ca 00 00 00 00 00 00 00 2a cc 0b e2 02 6d+23:34:08.430 WRITE DMA
ca 00 00 00 00 00 00 00 2a cb 0b e2 02 6d+23:34:08.430 WRITE DMA
ca 00 00 00 00 00 00 00 2a ca 0b e2 02 6d+23:34:08.430 WRITE DMA
Error 2 [1] occurred at disk power-on lifetime: 14291 hours (595 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 08 00 00 0e cb 80 5f e0 00 8 sectors at LBA = 0x0ecb805f = 248217695
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 60 00 00 04 0b e4 9f e0 00 02:31:44.000 READ DMA EXT
25 00 00 00 08 00 00 0e cb 80 57 e0 00 02:31:43.990 READ DMA EXT
25 00 00 00 80 00 00 04 0b e5 8f e0 00 02:31:43.990 READ DMA EXT
25 00 00 00 10 00 00 04 0b e4 8f e0 00 02:31:43.990 READ DMA EXT
25 00 00 00 08 00 00 0e c9 d2 c7 e0 00 02:31:43.990 READ DMA EXT
Error 1 [0] occurred at disk power-on lifetime: 359 hours (14 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 53 00 10 00 00 0f 85 77 ff e0 00 Error: ICRC, ABRT 16 sectors at LBA = 0x0f8577ff = 260405247
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 20 00 00 0f 85 77 ef e0 00 01:31:01.800 WRITE DMA EXT
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:31:01.780 FLUSH CACHE EXT
35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:31:01.780 WRITE DMA EXT
35 00 00 00 20 00 00 0f 85 74 ef e0 00 01:31:01.780 WRITE DMA EXT
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:31:01.760 FLUSH CACHE EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: --/31 Celsius
Lifetime Min/Max Temperature: --/51 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (42)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC