80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 6895, modified: 16)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions
Download Patch File Download Diff File Expand all files Collapse all files

92
HDD/Fujitsu/MHS2060/MHS2060AT/3C17C98DAB8F Normal file
View File

@@ -0,0 +1,92 @@
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.4 macppc] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHS AT
Device Model: FUJITSU MHS2060AT
Serial Number: --
Firmware Version: 8105
User Capacity: 60,011,642,880 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-6 T13/1410D revision 3a
Local Time is: Wed Dec 20 02:57:24 2023 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 621) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 225439
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 0
3 Spin_Up_Time 0x0003 093 093 025 Pre-fail Always - 23809
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 1252
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 4005
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0032 098 098 000 Old_age Always - 429h+27m+45s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 773
192 Emerg_Retract_Cycle_Ct 0x0032 099 099 000 Old_age Always - 27
193 Load_Cycle_Count 0x0032 096 096 000 Old_age Always - 14325
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Min/Max 9/54)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 14788
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Scan_UNC_SectCt 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Write_Error_Count 0x000f 100 100 060 Pre-fail Always - 17657
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 429500858987
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more

94
HDD/Fujitsu/MHV2040/MHV2040AH/EB78416AB45F Normal file
View File

@@ -0,0 +1,94 @@
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.3 i386] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV
Device Model: FUJITSU MHV2040AH
Serial Number: --
Firmware Version: 00840096
User Capacity: 40,007,761,920 bytes [40.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-6 T13/1410D revision 3a
Local Time is: Tue Jul 18 20:44:00 2023 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 221) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 28) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 142370
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 12124160
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 3468
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 (2000 0)
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 3535
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0032 070 070 000 Old_age Always - 15140h+40m+51s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2368
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 128
193 Load_Cycle_Count 0x0032 084 084 000 Old_age Always - 321699
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 37 (Min/Max 10/48)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 8
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 (0 7008)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 21896
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 429544701689
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

161
HDD/Fujitsu/MHV2080/MHV2080BH PL/B382FD7A8EDF Normal file
View File

@@ -0,0 +1,161 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV
Device Model: FUJITSU MHV2080BH PL
Serial Number: --
Firmware Version: 00000029
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
Local Time is: Thu Nov 7 20:31:54 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 471) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 99743
2 Throughput_Performance P-S--- 100 100 030 - 22216704
3 Spin_Up_Time PO---- 100 100 025 - 0
4 Start_Stop_Count -O--CK 099 099 000 - 2445
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 1323
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Seconds -O--CK 094 094 000 - 3122h+34m+47s
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2372
192 Power-Off_Retract_Count -O--CK 100 100 000 - 65
193 Load_Cycle_Count -O--CK 098 098 000 - 52674
194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 8/54)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 744
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6959)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 4398
203 Run_Out_Cancel -O---- 100 100 000 - 1529194610964
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: --/35 Celsius
Lifetime Min/Max Temperature: --/54 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (105)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

100
HDD/Fujitsu/MHV2080/MHV2080BH/EF927B29D13D Normal file
View File

@@ -0,0 +1,100 @@
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.3 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV
Device Model: FUJITSU MHV2080BH
Serial Number: --
Firmware Version: 00000029
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
Local Time is: Tue Aug 8 13:00:18 2023 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 471) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 68655
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 21954560
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 3158
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 (2000 0)
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 524
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0032 089 089 000 Old_age Always - 5857h+37m+40s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3103
192 Power-Off_Retract_Count 0x0032 090 090 000 Old_age Always - 2577
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 139818
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 (Min/Max 14/58)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 262
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 (0 6938)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 20465
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3728082796683
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5409 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

318
HDD/Fujitsu/MHW2120/MHW2120BH/94245EB70B48 Normal file
View File

@@ -0,0 +1,318 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p8 i386] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHW BH
Device Model: FUJITSU MHW2120BH
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 00850012
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sun Dec 24 18:45:20 2023 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 578) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 1211
2 Throughput_Performance --S--- 100 100 000 - 32374784
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 2144
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate -OSR-- 100 100 000 - 2553
8 Seek_Time_Performance --S--- 100 100 000 - 0
9 Power_On_Hours -O--CK 086 086 000 - 7083
10 Spin_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2139
191 G-Sense_Error_Rate -O--C- 100 100 000 - 1678
192 Power-Off_Retract_Count -O--CK 100 100 000 - 133
194 Temperature_Celsius -O---K 100 065 000 - 34 (Min/Max 19/67)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6991)
197 Current_Pending_Sector -O--C- 099 095 000 - 2
198 Offline_Uncorrectable ----C- 097 097 000 - 7
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate -OSR-- 100 100 000 - 26122
201 Soft_Read_Error_Rate ----C- 100 100 000 - 0
203 Run_Out_Cancel -O---- 100 100 000 - 2632754003933
225 Load_Cycle_Count -O--CK 100 100 000 - 6422
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 35
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 35 [34] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 3d 6e ad 1f 75 52 73 eb 00 Error: UNC 61 sectors at LBA = 0x6ead1f755273 = 121689836180083
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 80 6e ad 1f 75 52 30 eb 00 18:02:06.747 READ DMA
c8 00 00 00 08 61 19 a7 6e ad 18 eb 00 18:02:06.740 READ DMA
ca 00 00 00 08 73 e5 8f 61 19 a0 e1 00 18:02:06.740 WRITE DMA
c8 00 00 00 78 6e ad b7 73 e5 18 eb 00 18:02:06.727 READ DMA
c8 00 00 00 50 60 ea 7f 6e ad 68 eb 00 18:02:06.718 READ DMA
Error 34 [33] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 0d 42 75 52 73 75 54 6e eb 00 Error: UNC 3394 sectors at LBA = 0x75527b75546e = 128997119054958
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 0d 50 75 52 73 75 54 60 eb 00 17:33:30.813 READ DMA
c8 00 00 00 20 6b 45 6f 75 52 60 eb 00 17:33:26.160 READ DMA
c8 00 00 00 10 6b 45 5f 6b 45 60 eb 00 17:33:26.160 READ DMA
c8 00 00 00 80 6b 44 df 6b 44 e0 eb 00 17:33:26.158 READ DMA
c8 00 00 00 30 6d 89 6f 6b 44 b0 eb 00 17:33:26.144 READ DMA
Error 33 [32] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 0d 6b 45 6f 75 52 73 eb 00 Error: UNC 13 sectors at LBA = 0x6b456f755273 = 117945966875251
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 20 6b 45 6f 75 52 60 eb 00 17:33:26.160 READ DMA
c8 00 00 00 10 6b 45 5f 6b 45 60 eb 00 17:33:26.160 READ DMA
c8 00 00 00 80 6b 44 df 6b 44 e0 eb 00 17:33:26.158 READ DMA
c8 00 00 00 30 6d 89 6f 6b 44 b0 eb 00 17:33:26.144 READ DMA
c8 00 00 00 28 6b e3 ff 6d 89 48 eb 00 17:33:26.144 READ DMA
Error 32 [31] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 38 03 8f 2f 75 52 78 eb 00 Error: UNC 56 sectors at LBA = 0x38f2f755278 = 3913511424632
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 38 03 8f 2f 75 52 78 eb 00 17:28:20.982 READ DMA
ca 00 00 00 08 75 d1 b7 03 8f 28 e6 00 17:28:20.944 WRITE DMA
ca 00 00 00 f8 75 d0 bf 75 d0 c0 eb 00 17:28:20.943 WRITE DMA
ca 00 00 00 00 6b 85 4f 75 cf c0 eb 00 17:28:20.942 WRITE DMA
ca 00 00 00 f8 6b 84 57 6b 84 58 eb 00 17:28:20.940 WRITE DMA
Error 31 [30] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 42 05 75 54 6e 75 52 73 eb 00 Error: UNC 16901 sectors at LBA = 0x75546f755273 = 129005507662451
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 42 18 75 54 6e 75 52 60 eb 00 17:28:16.326 READ DMA
c8 00 00 00 50 79 bb e7 75 54 60 eb 00 17:28:11.669 READ DMA
c8 00 00 00 18 79 bb cf 79 bb d0 eb 00 17:28:11.669 READ DMA
c8 00 00 00 80 79 bb 4f 79 bb 50 eb 00 17:28:11.668 READ DMA
c8 00 00 00 40 79 bc e7 79 bb 10 eb 00 17:28:11.668 READ DMA
Error 30 [29] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 42 79 bb e7 75 54 6e eb 00 Error: UNC 66 sectors at LBA = 0x79bbef75546e = 133848083289198
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 50 79 bb e7 75 54 60 eb 00 17:28:11.669 READ DMA
c8 00 00 00 18 79 bb cf 79 bb d0 eb 00 17:28:11.669 READ DMA
c8 00 00 00 80 79 bb 4f 79 bb 50 eb 00 17:28:11.668 READ DMA
c8 00 00 00 40 79 bc e7 79 bb 10 eb 00 17:28:11.668 READ DMA
c8 00 00 00 40 79 bc a7 79 bc a8 eb 00 17:28:11.667 READ DMA
Error 29 [28] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 05 70 5f 3f 75 52 73 eb 00 Error: UNC 5 sectors at LBA = 0x705f3f755273 = 123554388857459
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 18 70 5f 3f 75 52 60 eb 00 17:26:46.953 READ DMA
ca 00 00 00 88 70 5e b7 70 5e b8 eb 00 17:26:46.915 WRITE DMA
ca 00 00 00 00 70 5d b7 70 5d b8 eb 00 17:26:46.914 WRITE DMA
ca 00 00 00 00 69 67 a7 70 5c b8 eb 00 17:26:46.912 WRITE DMA
ca 00 00 00 88 69 67 1f 69 67 20 eb 00 17:26:46.912 WRITE DMA
Error 28 [27] occurred at disk power-on lifetime: 6777 hours (282 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 03 03 8f 2f 75 54 ad eb 00 Error: UNC 3 sectors at LBA = 0x38f2f7554ad = 3913511425197
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 38 03 8f 2f 75 54 78 eb 00 17:26:42.352 READ DMA
ca 00 00 00 08 c4 71 5f 03 8f 28 e6 00 17:26:42.316 WRITE DMA
ca 00 00 00 90 c4 70 cf c4 70 d0 e6 00 17:26:42.315 WRITE DMA
ca 00 00 00 00 c4 6f cf c4 6f d0 e6 00 17:26:42.314 WRITE DMA
ca 00 00 00 00 43 66 4f c4 6e d0 e6 00 17:26:42.313 WRITE DMA
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 904 -
# 2 Short offline Completed without error 00% 2 -
# 3 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: --/35 Celsius
Lifetime Min/Max Temperature: --/67 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (48)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

245
HDD/Fujitsu/MHW2160/MHW2160BH PL/0C89C221565F Normal file
View File

@@ -0,0 +1,245 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHW BH
Device Model: FUJITSU MHW2160BH PL
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0000001C
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Fri Aug 11 17:16:34 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 136563
2 Throughput_Performance P-S--- 100 100 030 - 38600704
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 098 098 000 - 6933
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 3140
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 064 064 000 - 18464
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 5049
192 Power-Off_Retract_Count -O--CK 100 100 000 - 195
193 Load_Cycle_Count -O--CK 096 096 000 - 87627
194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 1/54)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 501
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6316)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 24862
203 Run_Out_Cancel -O---- 100 100 000 - 3728109274414
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 4
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 [3] occurred at disk power-on lifetime: 8611 hours (358 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 bc 00 00 00 e3 0d 1b e0 00 Error: ICRC, ABRT 188 sectors at LBA = 0x00e30d1b = 14880027
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 01 00 00 00 00 e3 0c d7 e0 00 01:07:26.523 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 0b d7 e0 00 01:07:26.522 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 0a d7 e0 00 01:07:26.516 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 09 d7 e0 00 01:07:26.514 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 08 d7 e0 00 01:07:26.511 WRITE DMA EXT
Error 3 [2] occurred at disk power-on lifetime: 1360 hours (56 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 01 02 40 bf e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x010240bf = 16924863
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 01 02 40 bf e0 00 00:04:30.779 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 b7 e0 00 00:04:30.779 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 af e0 00 00:04:30.778 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 a7 e0 00 00:04:30.778 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 9f e0 00 00:04:30.778 WRITE DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 391 hours (16 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 01 00 23 a7 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x010023a7 = 16786343
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 01 00 23 a7 e0 00 08:37:29.411 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 9f e0 00 08:37:29.410 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 97 e0 00 08:37:29.410 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 8f e0 00 08:37:29.409 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 87 e0 00 08:37:29.409 WRITE DMA EXT
Error 1 [0] occurred at disk power-on lifetime: 224 hours (9 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 01 01 ab 8f e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0101ab8f = 16886671
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 01 01 ab 8f e0 00 00:06:47.408 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 87 e0 00 00:06:47.407 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 7f e0 00 00:06:47.407 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 77 e0 00 00:06:47.407 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 6f e0 00 00:06:47.406 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: --/36 Celsius
Lifetime Min/Max Temperature: --/54 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (105)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1107 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

201
HDD/Fujitsu/MHW2160/MHW2160BH PL/3BC00BFB7852 Normal file
View File

@@ -0,0 +1,201 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHW BH
Device Model: FUJITSU MHW2160BH PL
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 891F
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Mon Sep 9 22:50:02 2024 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 217236
2 Throughput_Performance P-S--- 100 100 030 - 39124992
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 3488
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 3115
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 027 027 000 - 36642
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3411
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 253 253 000 - 0
185 Unknown_Attribute ----C- 253 253 000 - 0
186 Unknown_Attribute -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 054 044 000 - 46 (Min/Max 35/48)
191 G-Sense_Error_Rate -O--CK 253 099 000 - 16580611
192 Power-Off_Retract_Count -O--CK 100 100 000 - 11010216
193 Load_Cycle_Count -O--CK 076 076 000 - 480397
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 93
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6849)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 21541
203 Run_Out_Cancel -O---- 100 100 000 - 3728047604811
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 35217 hours (1467 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 04 e8 b5 e0 00 Error: ICRC, ABRT at LBA = 0x0004e8b5 = 321717
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 77 00 00 00 04 e8 3f e0 00 00:02:40.955 WRITE DMA EXT
35 00 00 00 2d 00 00 00 04 e8 0f e0 00 00:02:40.955 WRITE DMA EXT
35 00 00 00 2d 00 00 00 04 e7 df e0 00 00:02:40.954 WRITE DMA EXT
35 00 00 00 04 00 00 00 04 e7 d7 e0 00 00:02:40.954 WRITE DMA EXT
35 00 00 00 08 00 00 00 04 e7 cf e0 00 00:02:40.953 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 36638 -
# 2 Short offline Aborted by host 90% 36638 -
# 3 Short offline Aborted by host 90% 36637 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: --/50 Celsius
Lifetime Min/Max Temperature: --/63 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (47)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

162
HDD/Fujitsu/MHX2250/MHX2250BT/A4892D924287 Normal file
View File

@@ -0,0 +1,162 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHX2250BT
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0040000C
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Tue Jun 27 23:23:41 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1382) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 159) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 187890
2 Throughput_Performance P-S--- 100 100 030 - 74383360
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 1809
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 46
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 080 080 000 - 10116
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1771
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10
193 Load_Cycle_Count -O--CK 086 086 000 - 289992
194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 14/47)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 3105
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6024)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 20759
203 Run_Out_Cancel -O---- 100 100 000 - 1533264069449
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: --/31 Celsius
Lifetime Min/Max Temperature: --/47 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (2)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 33 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 33 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

168
HDD/Fujitsu/MHY2120/MHY2120BH/EE149F934E39 Normal file
View File

@@ -0,0 +1,168 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHY BH
Device Model: FUJITSU MHY2120BH
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0084000D
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sat Oct 7 10:36:00 2023 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 487) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 69) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 27881
2 Throughput_Performance P-S--- 100 100 030 - 26935296
3 Spin_Up_Time PO---- 100 100 025 - 0
4 Start_Stop_Count -O--CK 099 099 000 - 1486
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 1448
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 032 032 000 - 34307
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1091
192 Power-Off_Retract_Count -O--CK 100 100 000 - 103
193 Load_Cycle_Count -O--CK 087 087 000 - 263155
194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 7/50)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 19
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6977)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 4927
203 Run_Out_Cancel -O---- 100 100 000 - 1529152408603
240 Transfer_Error_Rate -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16890 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 29/41 Celsius
Lifetime Min/Max Temperature: 7/50 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (416)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 101 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 102 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

232
HDD/Fujitsu/MHZ2160/MHZ2160BH FFS G1/D5936C44D8DA Normal file
View File

@@ -0,0 +1,232 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHZ BH
Device Model: FUJITSU MHZ2160BH FFS G1
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 00810091
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Tue Oct 17 00:48:27 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 0
2 Throughput_Performance P-S--- 100 100 030 - 0
3 Spin_Up_Time PO---- 100 100 025 - 0
4 Start_Stop_Count -O--CK 094 094 000 - 29290
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0
7 Seek_Error_Rate POSR-- 100 100 047 - 0
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 089 089 000 - 5733
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 095 095 000 - 25149
160 Unknown_Attribute -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 097 097 000 - 2276544021356
193 Load_Cycle_Count -O--CK 092 092 000 - 170870
194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 10/53)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 0
203 Run_Out_Cancel -O---- 100 100 000 - 0
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
254 Free_Fall_Sensor -O--CK 100 100 000 - 8589942966
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 3
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 [2] occurred at disk power-on lifetime: 4252 hours (177 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 b1 00 00 ff 00 46 e8 40 00 Error: ICRC, ABRT 177 sectors at LBA = 0xff0046e8 = 4278208232
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 01 00 00 0d ff 00 46 99 40 00 00:01:30.535 WRITE DMA EXT
35 00 00 01 00 00 0d fe 00 46 99 40 00 00:01:30.534 WRITE DMA EXT
35 00 00 01 00 00 0d fd 00 46 99 40 00 00:01:30.531 WRITE DMA EXT
35 00 00 01 00 00 0d fc 00 46 99 40 00 00:01:30.529 WRITE DMA EXT
35 00 00 01 00 00 0d fb 00 46 99 40 00 00:01:30.524 WRITE DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 4024 hours (167 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 5b 00 06 a0 00 3c e0 00 00 Error:
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 08 00 01 00 00 00 00 00 01 00 ff 00:11:52.899 NOP [Reserved subcommand] [OBS-ACS-2]
60 00 08 00 68 00 0d ad 00 41 98 40 00 00:11:22.892 READ FPDMA QUEUED
60 00 08 00 60 00 05 3f 00 7c 58 40 00 00:11:04.519 READ FPDMA QUEUED
60 00 08 00 58 00 06 a0 00 3c e0 40 00 00:10:54.148 READ FPDMA QUEUED
61 00 08 00 50 00 05 b7 00 88 00 40 00 00:10:52.550 WRITE FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 2333 hours (97 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 70 00 00 b5 00 4a 7b 40 00 Error: ICRC, ABRT 112 sectors at LBA = 0xb5004a7b = 3036695163
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 0d b4 00 4a eb 40 00 00:00:27.364 READ DMA EXT
25 00 00 01 00 00 0d b3 00 4a eb 40 00 00:00:27.361 READ DMA EXT
25 00 00 01 00 00 0d b2 00 4a eb 40 00 00:00:27.357 READ DMA EXT
25 00 00 01 00 00 0d b1 00 4a eb 40 00 00:00:27.354 READ DMA EXT
25 00 00 01 00 00 0d b0 00 4a eb 40 00 00:00:27.351 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 28/29 Celsius
Lifetime Min/Max Temperature: 10/53 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (439)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

242
HDD/Fujitsu/MHZ2160/MHZ2160BH G2/892C1D5D4174 Normal file
View File

@@ -0,0 +1,242 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHZ BH
Device Model: FUJITSU MHZ2160BH G2
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 8909
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Tue Oct 15 20:22:11 2024 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 47480
2 Throughput_Performance P-S--- 100 100 030 - 28311552
3 Spin_Up_Time PO---- 100 100 025 - 0
4 Start_Stop_Count -O--CK 099 099 000 - 2366
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 2996
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 095 095 000 - 2747
10 Spin_Retry_Count PO--C- 100 100 020 - 0
11 Calibration_Retry_Count -O--CK 253 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2341
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 253 253 097 - 0
185 Unknown_Attribute ----C- 253 253 000 - 0
186 Unknown_Attribute -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 2336462209024
188 Command_Timeout -O--CK 100 099 000 - 5
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 063 044 000 - 37 (Min/Max 27/38)
191 G-Sense_Error_Rate -O--CK 253 099 000 - 16580609
192 Power-Off_Retract_Count -O--CK 100 100 000 - 9175180
193 Load_Cycle_Count -O--CK 100 100 000 - 14362
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 122
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6931)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 30620
203 Run_Out_Cancel -O---- 100 100 000 - 429532643801
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x23 GPL,SL R/O 1 Delayed sector log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 3
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 [2] occurred at disk power-on lifetime: 2459 hours (102 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 03 00 00 ab 00 03 a5 60 00 Error: ICRC, ABRT 3 sectors at LBA = 0xab0003a5 = 2868904869
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 ab 00 03 a0 60 00 01:07:45.653 WRITE DMA EXT
35 00 00 00 08 00 00 ab 00 03 98 60 00 01:07:45.653 WRITE DMA EXT
35 00 00 00 08 00 00 ab 00 03 90 60 00 01:07:45.652 WRITE DMA EXT
35 00 00 00 08 00 00 ab 00 03 88 60 00 01:07:45.651 WRITE DMA EXT
35 00 00 00 08 00 00 ab 00 03 80 60 00 01:07:45.651 WRITE DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 2444 hours (101 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 ff 00 03 ff 60 00 Error: ICRC, ABRT 1 sectors at LBA = 0xff0003ff = 4278191103
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 ff 00 03 f8 60 00 01:02:35.603 WRITE DMA EXT
35 00 00 00 08 00 00 ff 00 03 f0 60 00 01:02:35.603 WRITE DMA EXT
35 00 00 00 08 00 00 ff 00 03 e8 60 00 01:02:35.601 WRITE DMA EXT
35 00 00 00 08 00 00 ff 00 03 e0 60 00 01:02:35.601 WRITE DMA EXT
35 00 00 00 08 00 00 ff 00 03 d8 60 00 01:02:35.600 WRITE DMA EXT
Error 1 [0] occurred at disk power-on lifetime: 2354 hours (98 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 71 00 00 2a 00 dc ee e0 00 Error: ICRC, ABRT 113 sectors at LBA = 0x2a00dcee = 704699630
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 02 2a 00 dc df e0 00 00:49:48.526 WRITE DMA EXT
35 00 00 00 30 00 04 22 00 b9 af e0 00 00:49:48.526 WRITE DMA EXT
35 00 00 00 50 00 02 2d 00 d6 df e0 00 00:49:48.525 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 00 cf e0 00 00:49:47.931 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 00 d7 e0 00 00:49:47.930 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3 -
# 2 Short offline Completed without error 00% 3 -
# 3 Short offline Completed without error 00% 2 -
# 4 Short offline Completed without error 00% 1 -
# 5 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 39 Celsius
Power Cycle Min/Max Temperature: 29/40 Celsius
Lifetime Min/Max Temperature: 16/60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (310)
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 19 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC