80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 6895, modified: 16)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions
Download Patch File Download Diff File Expand all files Collapse all files

245
HDD/Fujitsu/MHW2160/MHW2160BH PL/0C89C221565F Normal file
View File

@@ -0,0 +1,245 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHW BH
Device Model: FUJITSU MHW2160BH PL
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 0000001C
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Fri Aug 11 17:16:34 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 136563
2 Throughput_Performance P-S--- 100 100 030 - 38600704
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 098 098 000 - 6933
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 3140
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 064 064 000 - 18464
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 5049
192 Power-Off_Retract_Count -O--CK 100 100 000 - 195
193 Load_Cycle_Count -O--CK 096 096 000 - 87627
194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 1/54)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 501
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6316)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 24862
203 Run_Out_Cancel -O---- 100 100 000 - 3728109274414
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 4
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 [3] occurred at disk power-on lifetime: 8611 hours (358 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 bc 00 00 00 e3 0d 1b e0 00 Error: ICRC, ABRT 188 sectors at LBA = 0x00e30d1b = 14880027
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 01 00 00 00 00 e3 0c d7 e0 00 01:07:26.523 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 0b d7 e0 00 01:07:26.522 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 0a d7 e0 00 01:07:26.516 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 09 d7 e0 00 01:07:26.514 WRITE DMA EXT
35 00 00 01 00 00 00 00 e3 08 d7 e0 00 01:07:26.511 WRITE DMA EXT
Error 3 [2] occurred at disk power-on lifetime: 1360 hours (56 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 01 02 40 bf e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x010240bf = 16924863
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 01 02 40 bf e0 00 00:04:30.779 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 b7 e0 00 00:04:30.779 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 af e0 00 00:04:30.778 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 a7 e0 00 00:04:30.778 WRITE DMA EXT
35 00 00 00 08 00 00 01 02 40 9f e0 00 00:04:30.778 WRITE DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 391 hours (16 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 01 00 23 a7 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x010023a7 = 16786343
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 01 00 23 a7 e0 00 08:37:29.411 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 9f e0 00 08:37:29.410 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 97 e0 00 08:37:29.410 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 8f e0 00 08:37:29.409 WRITE DMA EXT
35 00 00 00 08 00 00 01 00 23 87 e0 00 08:37:29.409 WRITE DMA EXT
Error 1 [0] occurred at disk power-on lifetime: 224 hours (9 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 01 01 ab 8f e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0101ab8f = 16886671
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 08 00 00 01 01 ab 8f e0 00 00:06:47.408 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 87 e0 00 00:06:47.407 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 7f e0 00 00:06:47.407 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 77 e0 00 00:06:47.407 WRITE DMA EXT
35 00 00 00 08 00 00 01 01 ab 6f e0 00 00:06:47.406 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: --/36 Celsius
Lifetime Min/Max Temperature: --/54 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (105)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1107 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC

201
HDD/Fujitsu/MHW2160/MHW2160BH PL/3BC00BFB7852 Normal file
View File

@@ -0,0 +1,201 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHW BH
Device Model: FUJITSU MHW2160BH PL
Serial Number: --
LU WWN Device Id: 5 00000e ...
Firmware Version: 891F
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Mon Sep 9 22:50:02 2024 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 046 - 217236
2 Throughput_Performance P-S--- 100 100 030 - 39124992
3 Spin_Up_Time PO---- 100 100 025 - 1
4 Start_Stop_Count -O--CK 099 099 000 - 3488
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0)
7 Seek_Error_Rate POSR-- 100 100 047 - 3115
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Hours -O--CK 027 027 000 - 36642
10 Spin_Retry_Count PO--C- 100 100 020 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3411
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 253 253 000 - 0
185 Unknown_Attribute ----C- 253 253 000 - 0
186 Unknown_Attribute -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 054 044 000 - 46 (Min/Max 35/48)
191 G-Sense_Error_Rate -O--CK 253 099 000 - 16580611
192 Power-Off_Retract_Count -O--CK 100 100 000 - 11010216
193 Load_Cycle_Count -O--CK 076 076 000 - 480397
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 93
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6849)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 21541
203 Run_Out_Cancel -O---- 100 100 000 - 3728047604811
240 Head_Flying_Hours -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 51 Comprehensive SMART error log
0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 35217 hours (1467 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 04 e8 b5 e0 00 Error: ICRC, ABRT at LBA = 0x0004e8b5 = 321717
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 77 00 00 00 04 e8 3f e0 00 00:02:40.955 WRITE DMA EXT
35 00 00 00 2d 00 00 00 04 e8 0f e0 00 00:02:40.955 WRITE DMA EXT
35 00 00 00 2d 00 00 00 04 e7 df e0 00 00:02:40.954 WRITE DMA EXT
35 00 00 00 04 00 00 00 04 e7 d7 e0 00 00:02:40.954 WRITE DMA EXT
35 00 00 00 08 00 00 00 04 e7 cf e0 00 00:02:40.953 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 36638 -
# 2 Short offline Aborted by host 90% 36638 -
# 3 Short offline Aborted by host 90% 36637 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 0 (0x0000)
Device State: Active (0)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: --/50 Celsius
Lifetime Min/Max Temperature: --/63 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (47)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC