80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 6895, modified: 16)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions
Download Patch File Download Diff File Expand all files Collapse all files

211
HDD/HPE/MB0010/MB001000GWFWK/8C8E10B5824A Normal file
View File

@@ -0,0 +1,211 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MB001000GWFWK
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: HPG6
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 2 19:46:35 2024 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x2025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 140 139 021 - 4000
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 100 200 051 - 0
9 Power_On_Hours -O--CK 100 100 000 - 16
10 Spin_Retry_Count PO--CK 100 253 051 - 0
169 Unknown_Attribute P----K 100 100 098 - 0
180 Unknown_HDD_Attribute POSR-K 200 200 100 - 0
194 Temperature_Celsius -O---K 107 105 000 - 36
196 Reallocated_Event_Count PO--CK 200 200 140 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 113 Pending Defects log
0x0d GPL,SL R/O 8 LPS Mis-alignment log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80 GPL R/W 16 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xb4 GPL,SL VS 16 Device vendor specific log
0xb5 SL VS 1 Device vendor specific log
0xb6 GPL VS 3 Device vendor specific log
0xb7 GPL,SL VS 39 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xd0 GPL VS 1 Device vendor specific log
0xd7 GPL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 32/36 Celsius
Lifetime Min/Max Temperature: 19/38 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (81)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 25 --- Lifetime Power-On Resets
0x01 0x010 4 16 --- Power-on Hours
0x01 0x018 6 23652884 --- Logical Sectors Written
0x01 0x020 6 88248 --- Number of Write Commands
0x01 0x028 6 464747040 --- Logical Sectors Read
0x01 0x030 6 551938 --- Number of Read Commands
0x01 0x038 6 57600000 --- Date and Time TimeStamp
0x01 0x048 2 0 N-- Workload Utilization
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 16 --- Spindle Motor Power-on Hours
0x03 0x010 4 16 --- Head Flying Hours
0x03 0x018 4 26 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 17 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 36 --- Current Temperature
0x05 0x010 1 - --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 38 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x030 1 - --- Highest Average Short Term Temperature
0x05 0x038 1 - --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 - --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 91 --- Number of Hardware Resets
0x06 0x010 4 65 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 0 Vendor specific

386
HDD/HPE/MB0500/MB0500GCEHE/068950F69B67 Normal file
View File

@@ -0,0 +1,386 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MB0500GCEHE
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: HPG1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 16 01:08:33 2024 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 81) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 335
3 Spin_Up_Time POS--K 174 171 021 - 2275
4 Start_Stop_Count -O--CK 100 100 000 - 457
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 082 082 000 - 13349
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count PO--CK 100 100 051 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 457
180 Unknown_HDD_Attribute POSR-K 200 200 100 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 001 000 - 234
188 Command_Timeout -O--CK 100 094 000 - 13
190 Airflow_Temperature_Cel -O---K 064 059 045 - 36
192 Power-Off_Retract_Count -O--CK 200 200 000 - 100
193 Load_Cycle_Count -O--CK 200 200 000 - 356
194 Temperature_Celsius -O---K 107 102 000 - 36
195 Hardware_ECC_Recovered -OS-CK 200 200 000 - 0
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 23
198 Offline_Uncorrectable ----CK 200 200 000 - 16
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 20
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1903 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 234 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 234 [17] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f5 86 40 00 Error: UNC at LBA = 0x3a13f586 = 974386566
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 a0 00 00 3a 13 f5 80 40 08 15:25:30.105 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:30.101 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:30.101 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:30.101 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:30.100 SET FEATURES [Enable SATA feature]
Error 233 [16] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f5 86 40 00 Error: UNC at LBA = 0x3a13f586 = 974386566
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 30 00 00 3a 13 f5 80 40 08 15:25:28.306 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:28.303 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:28.303 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:28.302 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:28.302 SET FEATURES [Enable SATA feature]
Error 232 [15] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f5 86 40 00 Error: UNC at LBA = 0x3a13f586 = 974386566
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 98 00 00 3a 13 f5 80 40 08 15:25:26.508 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:26.506 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:26.504 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:26.504 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:26.504 SET FEATURES [Enable SATA feature]
Error 231 [14] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f5 86 40 00 Error: UNC at LBA = 0x3a13f586 = 974386566
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 40 00 00 3a 13 f5 80 40 08 15:25:24.717 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:24.716 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:24.714 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:24.714 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:24.714 SET FEATURES [Enable SATA feature]
Error 230 [13] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f5 86 40 00 Error: UNC at LBA = 0x3a13f586 = 974386566
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 28 00 00 3a 13 f5 80 40 08 15:25:22.940 READ FPDMA QUEUED
60 00 08 00 20 00 00 3a 13 f5 78 40 08 15:25:22.940 READ FPDMA QUEUED
60 00 08 00 18 00 00 3a 13 f5 70 40 08 15:25:22.940 READ FPDMA QUEUED
60 00 08 00 10 00 00 3a 13 f5 68 40 08 15:25:22.939 READ FPDMA QUEUED
60 00 08 00 08 00 00 3a 13 f5 60 40 08 15:25:22.939 READ FPDMA QUEUED
Error 229 [12] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f0 fb 40 00 Error: UNC at LBA = 0x3a13f0fb = 974385403
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 18 00 00 3a 13 f0 f8 40 08 15:25:21.090 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:21.087 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:21.087 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:21.087 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:21.085 SET FEATURES [Enable SATA feature]
Error 228 [11] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f0 fb 40 00 Error: UNC at LBA = 0x3a13f0fb = 974385403
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 b8 00 00 3a 13 f0 f8 40 08 15:25:19.291 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:19.288 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:19.288 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:19.288 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:19.287 SET FEATURES [Enable SATA feature]
Error 227 [10] occurred at disk power-on lifetime: 9776 hours (407 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 3a 13 f0 fb 40 00 Error: UNC at LBA = 0x3a13f0fb = 974385403
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 00 00 00 3a 13 f0 f8 40 08 15:25:17.493 READ FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:17.490 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:25:17.489 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:25:17.489 SET FEATURES [Set transfer mode]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:25:17.489 SET FEATURES [Enable SATA feature]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 13211 974000030
# 2 Extended offline Completed: read failure 90% 12324 974000030
# 3 Extended offline Completed: read failure 90% 12323 974000030
# 4 Extended offline Completed: read failure 90% 11716 974000030
# 5 Extended offline Completed: read failure 90% 10478 974000030
# 6 Extended offline Completed: read failure 90% 10006 974000030
# 7 Extended offline Completed: read failure 90% 9932 974000030
# 8 Extended offline Completed: read failure 90% 9932 974000030
# 9 Extended offline Completed: read failure 90% 9932 974000030
#10 Extended offline Completed: read failure 90% 9932 974000030
#11 Extended offline Completed: read failure 90% 9932 974000030
#12 Extended offline Completed: read failure 90% 9932 974000030
#13 Extended offline Completed: read failure 90% 9932 974000030
#14 Extended offline Completed: read failure 90% 9932 974000030
#15 Extended offline Completed: read failure 90% 9736 973219881
#16 Extended offline Completed: read failure 90% 9713 973605476
#17 Extended offline Completed: read failure 90% 9713 974000030
#18 Extended offline Completed: read failure 90% 9713 973605476
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 35/40 Celsius
Lifetime Min/Max Temperature: 0/41 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (182)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 457 --- Lifetime Power-On Resets
0x01 0x010 4 13349 --- Power-on Hours
0x01 0x018 6 9768577735 --- Logical Sectors Written
0x01 0x020 6 102247492 --- Number of Write Commands
0x01 0x028 6 931560053863 --- Logical Sectors Read
0x01 0x030 6 2344225690 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 14000 --- Spindle Motor Power-on Hours
0x03 0x010 4 13997 --- Head Flying Hours
0x03 0x018 4 457 --- Head Load Events
0x03 0x020 4 200 N-- Number of Reallocated Logical Sectors
0x03 0x028 4 1182 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 100 N-- Number of Reported Uncorrectable Errors
0x04 0x010 4 100 N-- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 36 --- Current Temperature
0x05 0x010 1 35 --- Average Short Term Temperature
0x05 0x018 1 28 --- Average Long Term Temperature
0x05 0x020 1 41 --- Highest Temperature
0x05 0x028 1 18 --- Lowest Temperature
0x05 0x030 1 35 --- Highest Average Short Term Temperature
0x05 0x038 1 21 --- Lowest Average Short Term Temperature
0x05 0x040 1 33 --- Highest Average Long Term Temperature
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2127 --- Number of Hardware Resets
0x06 0x010 4 9975 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 36 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 23897 Vendor specific

230
HDD/HPE/MB0500/MB0500GCEHE/105F520524B7 Normal file
View File

@@ -0,0 +1,230 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MB0500GCEHE
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: HPG1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 16 01:08:33 2024 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 174 170 021 - 2291
4 Start_Stop_Count -O--CK 100 100 000 - 453
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 082 082 000 - 13365
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count PO--CK 100 100 051 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 453
180 Unknown_HDD_Attribute POSR-K 200 200 100 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 063 059 045 - 37
192 Power-Off_Retract_Count -O--CK 200 200 000 - 95
193 Load_Cycle_Count -O--CK 200 200 000 - 357
194 Temperature_Celsius -O---K 106 102 000 - 37
195 Hardware_ECC_Recovered -OS-CK 200 200 000 - 0
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1904 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13228 -
# 2 Extended offline Completed without error 00% 12341 -
# 3 Extended offline Interrupted (host reset) 60% 12339 -
# 4 Short offline Completed without error 00% 12013 -
# 5 Extended offline Completed without error 00% 11734 -
# 6 Extended offline Completed without error 00% 10494 -
# 7 Extended offline Completed without error 00% 9947 -
# 8 Extended offline Completed without error 00% 9899 -
# 9 Extended offline Completed without error 00% 9751 -
#10 Extended offline Completed without error 00% 9727 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 33/40 Celsius
Lifetime Min/Max Temperature: 14/41 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (220)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 453 --- Lifetime Power-On Resets
0x01 0x010 4 13365 --- Power-on Hours
0x01 0x018 6 5204848732 --- Logical Sectors Written
0x01 0x020 6 71247694 --- Number of Write Commands
0x01 0x028 6 928086597371 --- Logical Sectors Read
0x01 0x030 6 1817806024 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 14086 --- Spindle Motor Power-on Hours
0x03 0x010 4 14082 --- Head Flying Hours
0x03 0x018 4 453 --- Head Load Events
0x03 0x020 4 200 N-- Number of Reallocated Logical Sectors
0x03 0x028 4 8 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 100 N-- Number of Reported Uncorrectable Errors
0x04 0x010 4 100 N-- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 37 --- Current Temperature
0x05 0x010 1 37 --- Average Short Term Temperature
0x05 0x018 1 28 --- Average Long Term Temperature
0x05 0x020 1 41 --- Highest Temperature
0x05 0x028 1 18 --- Lowest Temperature
0x05 0x030 1 39 --- Highest Average Short Term Temperature
0x05 0x038 1 21 --- Lowest Average Short Term Temperature
0x05 0x040 1 33 --- Highest Average Long Term Temperature
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2131 --- Number of Hardware Resets
0x06 0x010 4 22301 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 36 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 23897 Vendor specific

353
HDD/HPE/MM1000/MM1000GBKAL/38175C0428E4 Normal file
View File

@@ -0,0 +1,353 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation.2 (SATA)
Device Model: MM1000GBKAL
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPGE
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 24 21:41:33 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 200) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 081 063 044 - 166048801
3 Spin_Up_Time PO---- 094 094 070 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 127
5 Reallocated_Sector_Ct PO--CK 081 081 036 - 787
7 Seek_Error_Rate POSR-- 075 060 030 - 34857299
9 Power_On_Hours -O--CK 049 049 000 - 45206
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 126
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1976310000
184 End-to-End_Error -O--CK 100 100 003 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 049 045 - 24 (Min/Max 12/24)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
193 Load_Cycle_Count -O--CK 100 100 000 - 1990
194 Temperature_Celsius -O---K 024 051 000 - 24 (0 9 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 117 099 000 - 166048801
196 Reallocated_Event_Count PO--CK 081 081 036 - 787
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xb6 GPL VS 1918 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 104 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 104 [3] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 9c 28 00 00 Error: IDNF at LBA = 0x22819c28 = 578919464
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 9c 28 40 00 3d+15:55:57.924 WRITE FPDMA QUEUED
60 00 00 02 00 00 00 23 17 48 70 40 00 3d+15:55:57.852 READ FPDMA QUEUED
60 00 00 00 e8 00 00 23 17 47 88 40 00 3d+15:55:57.842 READ FPDMA QUEUED
60 00 00 00 38 00 00 23 17 46 90 40 00 3d+15:55:57.842 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 17 44 90 40 00 3d+15:55:57.841 READ FPDMA QUEUED
Error 103 [2] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 4c 98 00 00 Error: IDNF at LBA = 0x18004c98 = 402672792
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 4c 98 40 00 3d+15:55:50.180 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 b0 40 00 3d+15:55:50.170 WRITE FPDMA QUEUED
60 00 00 01 78 00 00 23 15 03 78 40 00 3d+15:55:50.063 READ FPDMA QUEUED
60 00 00 01 38 00 00 23 15 01 e0 40 00 3d+15:55:50.060 READ FPDMA QUEUED
60 00 00 00 90 00 00 23 15 00 c0 40 00 3d+15:55:50.059 READ FPDMA QUEUED
Error 102 [1] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 53 d0 00 00 Error: IDNF at LBA = 0x228153d0 = 578900944
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 53 d0 40 00 3d+15:55:42.428 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 21 83 b4 e0 40 00 3d+15:55:42.427 READ FPDMA QUEUED
60 00 00 00 08 00 00 21 83 b4 d0 40 00 3d+15:55:42.423 READ FPDMA QUEUED
60 00 00 00 08 00 00 21 83 b4 d8 40 00 3d+15:55:42.422 READ FPDMA QUEUED
60 00 00 00 08 00 00 21 83 b4 c8 40 00 3d+15:55:42.418 READ FPDMA QUEUED
Error 101 [0] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 80 fd 28 00 00 Error: IDNF at LBA = 0x2280fd28 = 578878760
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 80 fd 28 40 00 3d+15:55:26.266 WRITE FPDMA QUEUED
60 00 00 00 c0 00 00 23 0c d3 f0 40 00 3d+15:55:26.257 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 80 fd 88 40 00 3d+15:55:26.248 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 80 fd 40 40 00 3d+15:55:26.238 WRITE FPDMA QUEUED
60 00 00 00 30 00 00 23 0c c9 68 40 00 3d+15:55:26.224 READ FPDMA QUEUED
Error 100 [19] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 23 05 34 00 00 00 Error: IDNF at LBA = 0x23053400 = 587543552
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 40 00 00 23 05 34 00 40 00 3d+15:54:42.693 WRITE FPDMA QUEUED
61 00 00 00 58 00 00 23 05 33 a0 40 00 3d+15:54:42.685 WRITE FPDMA QUEUED
61 00 00 00 60 00 00 23 05 33 38 40 00 3d+15:54:42.676 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 23 05 32 f0 40 00 3d+15:54:42.667 WRITE FPDMA QUEUED
61 00 00 00 40 00 00 23 05 32 a8 40 00 3d+15:54:42.659 WRITE FPDMA QUEUED
Error 99 [18] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 86 dd a0 00 00 Error: IDNF at LBA = 0x2186dda0 = 562486688
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 21 86 dd a0 40 00 3d+15:51:11.661 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 18 1e 64 98 40 00 3d+15:51:11.651 WRITE FPDMA QUEUED
61 00 00 00 48 00 00 24 80 80 a0 40 00 3d+15:51:11.645 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 24 00 32 80 40 00 3d+15:51:11.638 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 23 80 67 d0 40 00 3d+15:51:11.629 WRITE FPDMA QUEUED
Error 98 [17] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 82 5d 40 00 00 Error: IDNF at LBA = 0x21825d40 = 562191680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 21 82 5d 40 40 00 3d+15:51:05.739 WRITE FPDMA QUEUED
60 00 00 00 10 00 00 23 02 62 98 40 00 3d+15:51:05.729 READ FPDMA QUEUED
61 00 00 00 80 00 00 22 80 4e 08 40 00 3d+15:51:05.720 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 22 80 4d f0 40 00 3d+15:51:05.712 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 80 4d e0 40 00 3d+15:51:05.703 WRITE FPDMA QUEUED
Error 97 [16] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 86 d5 80 00 00 Error: IDNF at LBA = 0x2186d580 = 562484608
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 10 00 00 21 86 d5 80 40 00 3d+15:50:50.028 WRITE FPDMA QUEUED
60 00 00 00 78 00 00 24 80 2d 78 40 00 3d+15:50:50.016 READ FPDMA QUEUED
61 00 00 00 08 00 00 21 86 d5 80 40 00 3d+15:50:50.013 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 86 d3 18 40 00 3d+15:50:50.012 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 86 d2 00 40 00 3d+15:50:50.003 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44779 -
# 2 Short offline Completed without error 00% 44755 -
# 3 Short offline Completed without error 00% 44732 -
# 4 Short offline Completed without error 00% 44707 -
# 5 Short offline Completed without error 00% 44703 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: 12/24 Celsius
Lifetime Min/Max Temperature: 9/51 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (64)
SCT Error Recovery Control:
Read: 100 (10.0 seconds)
Write: 100 (10.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 126 --- Lifetime Power-On Resets
0x01 0x010 4 45206 --- Power-on Hours
0x01 0x018 6 12552860146 --- Logical Sectors Written
0x01 0x020 6 31069158 --- Number of Write Commands
0x01 0x028 6 54522273303 --- Logical Sectors Read
0x01 0x030 6 147509778 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 45209 --- Spindle Motor Power-on Hours
0x03 0x010 4 45209 --- Head Flying Hours
0x03 0x018 4 1990 --- Head Load Events
0x03 0x020 4 787 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

353
HDD/HPE/MM1000/MM1000GBKAL/6167FD60916E Normal file
View File

@@ -0,0 +1,353 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation.2 (SATA)
Device Model: MM1000GBKAL
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPGE
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 24 21:41:33 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 642) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 204) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 082 063 044 - 182229588
3 Spin_Up_Time PO---- 094 094 070 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 127
5 Reallocated_Sector_Ct PO--CK 095 095 036 - 237
7 Seek_Error_Rate POSR-- 081 060 030 - 140946336
9 Power_On_Hours -O--CK 049 049 000 - 45207
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 126
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 189036646
184 End-to-End_Error -O--CK 100 100 003 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 051 045 - 24 (Min/Max 13/25)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
193 Load_Cycle_Count -O--CK 100 100 000 - 1990
194 Temperature_Celsius -O---K 024 049 000 - 24 (0 11 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 118 099 000 - 182229588
196 Reallocated_Event_Count PO--CK 095 095 036 - 237
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xb6 GPL VS 1918 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 33 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 33 [12] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 1e 12 c8 00 00 Error: IDNF at LBA = 0x181e12c8 = 404624072
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 1e 12 c8 40 00 3d+15:56:32.197 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 f0 40 00 3d+15:56:32.185 WRITE FPDMA QUEUED
60 00 00 00 60 00 00 23 23 b6 f0 40 00 3d+15:56:32.162 READ FPDMA QUEUED
60 00 00 00 18 00 00 23 23 b6 d8 40 00 3d+15:56:32.162 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 82 54 80 40 00 3d+15:56:32.141 WRITE FPDMA QUEUED
Error 32 [11] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 05 80 28 d0 00 00 Error: IDNF at LBA = 0x058028d0 = 92285136
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 05 80 28 d0 40 00 3d+15:56:05.463 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 18 00 57 30 40 00 3d+15:56:05.441 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 d0 40 00 3d+15:56:05.435 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 02 94 5d 80 40 00 3d+15:56:05.429 WRITE FPDMA QUEUED
61 00 00 00 30 00 00 02 94 3a 08 40 00 3d+15:56:05.412 WRITE FPDMA QUEUED
Error 31 [10] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 1e 5f f8 00 00 Error: IDNF at LBA = 0x181e5ff8 = 404643832
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 28 00 00 18 1e 5f f8 40 00 3d+15:49:58.221 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 9f 8b 78 40 00 3d+15:49:58.211 WRITE FPDMA QUEUED
61 00 00 00 50 00 00 24 80 79 a8 40 00 3d+15:49:58.204 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 24 00 31 b8 40 00 3d+15:49:58.196 WRITE FPDMA QUEUED
61 00 00 00 28 00 00 23 80 63 30 40 00 3d+15:49:58.188 WRITE FPDMA QUEUED
Error 30 [9] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 1e 5f 00 00 00 Error: IDNF at LBA = 0x181e5f00 = 404643584
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 1e 5f 00 40 00 3d+15:49:38.462 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 18 1e 5e f8 40 00 3d+15:49:38.456 WRITE FPDMA QUEUED
60 00 00 01 c0 00 00 23 19 e2 18 40 00 3d+15:49:38.453 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 19 e0 18 40 00 3d+15:49:38.449 READ FPDMA QUEUED
60 00 00 01 78 00 00 23 19 de 10 40 00 3d+15:49:38.447 READ FPDMA QUEUED
Error 29 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 1e 58 40 00 00 Error: IDNF at LBA = 0x181e5840 = 404641856
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 1e 58 40 40 00 3d+15:47:16.912 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 30 6e c8 40 00 3d+15:47:16.903 WRITE FPDMA QUEUED
60 00 00 00 c8 00 00 23 30 5b b0 40 00 3d+15:47:16.898 READ FPDMA QUEUED
60 00 00 01 40 00 00 23 30 5a 18 40 00 3d+15:47:16.888 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 30 58 18 40 00 3d+15:47:16.887 READ FPDMA QUEUED
Error 28 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 1e 57 b8 00 00 Error: IDNF at LBA = 0x181e57b8 = 404641720
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 1e 57 b8 40 00 3d+15:47:03.849 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 24 80 6d 10 40 00 3d+15:47:03.840 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 24 80 6c f8 40 00 3d+15:47:03.832 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 24 80 6c d8 40 00 3d+15:47:03.821 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 24 00 30 50 40 00 3d+15:47:03.814 WRITE FPDMA QUEUED
Error 27 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 23 80 52 d8 00 00 Error: IDNF at LBA = 0x238052d8 = 595612376
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 23 80 52 d8 40 00 3d+15:44:02.266 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 23 33 d0 f8 40 00 3d+15:44:02.260 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 83 61 30 40 00 3d+15:44:02.251 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 86 d7 c0 40 00 3d+15:44:02.242 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 24 80 5f b8 40 00 3d+15:44:02.213 WRITE FPDMA QUEUED
Error 26 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 1e 4d d8 00 00 Error: IDNF at LBA = 0x181e4dd8 = 404639192
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 1e 4d d8 40 00 3d+15:43:21.352 WRITE FPDMA QUEUED
60 00 00 00 48 00 00 23 24 7b a8 40 00 3d+15:43:21.352 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 24 7b f0 40 00 3d+15:43:21.351 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 82 66 08 40 00 3d+15:43:21.343 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 23 24 7a c8 40 00 3d+15:43:21.328 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44780 -
# 2 Short offline Completed without error 00% 44756 -
# 3 Short offline Completed without error 00% 44733 -
# 4 Short offline Completed without error 00% 44708 -
# 5 Short offline Completed without error 00% 44430 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: 13/25 Celsius
Lifetime Min/Max Temperature: 11/48 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (121)
SCT Error Recovery Control:
Read: 100 (10.0 seconds)
Write: 100 (10.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 126 --- Lifetime Power-On Resets
0x01 0x010 4 45207 --- Power-on Hours
0x01 0x018 6 12607431482 --- Logical Sectors Written
0x01 0x020 6 84209927 --- Number of Write Commands
0x01 0x028 6 55042730696 --- Logical Sectors Read
0x01 0x030 6 200988889 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
0x03 0x010 4 45210 --- Head Flying Hours
0x03 0x018 4 1990 --- Head Load Events
0x03 0x020 4 237 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

352
HDD/HPE/MM1000/MM1000GBKAL/F1658F9937EE Normal file
View File

@@ -0,0 +1,352 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation.2 (SATA)
Device Model: MM1000GBKAL
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPGE
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 24 21:41:32 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 206) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 084 063 044 - 237961160
3 Spin_Up_Time PO---- 094 094 070 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 127
5 Reallocated_Sector_Ct PO--CK 073 073 036 - 1106
7 Seek_Error_Rate POSR-- 075 060 030 - 34629268
9 Power_On_Hours -O--CK 049 049 000 - 45207
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 126
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1545705648
184 End-to-End_Error -O--CK 100 100 003 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 047 045 - 24 (Min/Max 12/24)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
193 Load_Cycle_Count -O--CK 100 100 000 - 1998
194 Temperature_Celsius -O---K 024 053 000 - 24 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 120 099 000 - 237961160
196 Reallocated_Event_Count PO--CK 073 073 036 - 1106
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xb6 GPL VS 1918 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 149 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 149 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 82 2f c0 00 00 Error: IDNF at LBA = 0x22822fc0 = 578957248
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 82 2f c0 40 00 3d+15:56:24.205 WRITE FPDMA QUEUED
60 00 00 00 f0 00 00 23 21 3c c0 40 00 3d+15:56:24.204 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 21 3a c0 40 00 3d+15:56:24.195 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 82 30 20 40 00 3d+15:56:24.186 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 82 2f a8 40 00 3d+15:56:24.175 WRITE FPDMA QUEUED
Error 148 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 82 2a 38 00 00 Error: IDNF at LBA = 0x22822a38 = 578955832
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 82 2a 38 40 00 3d+15:56:23.232 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 23 21 92 40 40 00 3d+15:56:23.222 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 82 2f 10 40 00 3d+15:56:23.201 WRITE FPDMA QUEUED
60 00 00 00 68 00 00 23 21 93 28 40 00 3d+15:56:23.201 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 21 93 50 40 00 3d+15:56:23.201 READ FPDMA QUEUED
Error 147 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 f3 80 00 00 Error: IDNF at LBA = 0x2281f380 = 578941824
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 f3 80 40 00 3d+15:56:12.772 WRITE FPDMA QUEUED
60 00 00 00 28 00 00 23 1c d9 90 40 00 3d+15:56:12.745 READ FPDMA QUEUED
60 00 00 00 b8 00 00 23 1c d8 60 40 00 3d+15:56:12.738 READ FPDMA QUEUED
60 00 00 00 40 00 00 23 1c d4 00 40 00 3d+15:56:12.737 READ FPDMA QUEUED
60 00 00 00 e0 00 00 23 1c d2 b8 40 00 3d+15:56:12.736 READ FPDMA QUEUED
Error 146 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 ef 08 00 00 Error: IDNF at LBA = 0x2281ef08 = 578940680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 ef 08 40 00 3d+15:56:11.561 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 21 84 7d f0 40 00 3d+15:56:11.561 READ FPDMA QUEUED
60 00 00 00 10 00 00 21 84 7d 80 40 00 3d+15:56:11.561 READ FPDMA QUEUED
60 00 00 00 b8 00 00 21 84 7c c8 40 00 3d+15:56:11.560 READ FPDMA QUEUED
60 00 00 00 08 00 00 23 1c 75 f0 40 00 3d+15:56:11.482 READ FPDMA QUEUED
Error 145 [4] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 4c b0 00 00 Error: IDNF at LBA = 0x18004cb0 = 402672816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 4c b0 40 00 3d+15:56:00.152 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 c0 40 00 3d+15:56:00.143 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 93 9f 78 40 00 3d+15:56:00.131 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 23 17 29 28 40 00 3d+15:56:00.113 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 17 29 00 40 00 3d+15:56:00.113 READ FPDMA QUEUED
Error 144 [3] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 2d 08 00 00 Error: IDNF at LBA = 0x22812d08 = 578891016
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 2d 08 40 00 3d+15:55:38.383 WRITE FPDMA QUEUED
60 00 00 02 00 00 00 23 0f fb 28 40 00 3d+15:55:38.353 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 0f f9 28 40 00 3d+15:55:38.346 READ FPDMA QUEUED
60 00 00 02 00 00 00 23 0f f7 28 40 00 3d+15:55:38.345 READ FPDMA QUEUED
60 00 00 01 c8 00 00 23 0f f4 f8 40 00 3d+15:55:38.344 READ FPDMA QUEUED
Error 143 [2] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 2a e0 00 00 Error: IDNF at LBA = 0x18002ae0 = 402664160
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 2a e0 40 00 3d+15:54:08.975 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 00 2b 48 40 00 3d+15:54:08.933 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 21 86 d9 40 40 00 3d+15:54:08.884 READ FPDMA QUEUED
60 00 00 00 08 00 00 21 86 d5 88 40 00 3d+15:54:08.817 READ FPDMA QUEUED
61 00 00 00 08 00 00 05 80 28 00 40 00 3d+15:54:08.798 WRITE FPDMA QUEUED
Error 142 [1] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 86 dd a0 00 00 Error: IDNF at LBA = 0x2186dda0 = 562486688
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 10 00 00 21 86 dd a0 40 00 3d+15:51:15.457 WRITE FPDMA QUEUED
61 00 00 00 20 00 00 18 1e 64 98 40 00 3d+15:51:15.449 WRITE FPDMA QUEUED
61 00 00 00 48 00 00 24 80 80 a0 40 00 3d+15:51:15.440 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 24 00 32 80 40 00 3d+15:51:15.431 WRITE FPDMA QUEUED
61 00 00 00 18 00 00 23 80 67 d8 40 00 3d+15:51:15.422 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44779 -
# 2 Short offline Completed without error 00% 44756 -
# 3 Short offline Completed without error 00% 44732 -
# 4 Short offline Completed without error 00% 44708 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: 12/24 Celsius
Lifetime Min/Max Temperature: 10/53 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (14)
SCT Error Recovery Control:
Read: 100 (10.0 seconds)
Write: 100 (10.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 126 --- Lifetime Power-On Resets
0x01 0x010 4 45207 --- Power-on Hours
0x01 0x018 6 12523256080 --- Logical Sectors Written
0x01 0x020 6 31039985 --- Number of Write Commands
0x01 0x028 6 54225506715 --- Logical Sectors Read
0x01 0x030 6 146907177 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
0x03 0x010 4 45210 --- Head Flying Hours
0x03 0x018 4 1998 --- Head Load Events
0x03 0x020 4 1106 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

352
HDD/HPE/MM1000/MM1000GBKAL/F2D5A10F5B10 Normal file
View File

@@ -0,0 +1,352 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation.2 (SATA)
Device Model: MM1000GBKAL
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPGE
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 24 21:41:32 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 078 063 044 - 60643563
3 Spin_Up_Time PO---- 094 094 070 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 127
5 Reallocated_Sector_Ct PO--CK 070 070 036 - 1263
7 Seek_Error_Rate POSR-- 075 060 030 - 33945416
9 Power_On_Hours -O--CK 049 049 000 - 45207
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 126
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1543766816
184 End-to-End_Error -O--CK 100 100 003 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 099 099 000 - 1
190 Airflow_Temperature_Cel -O---K 076 047 045 - 24 (Min/Max 12/25)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
193 Load_Cycle_Count -O--CK 100 100 000 - 1996
194 Temperature_Celsius -O---K 024 053 000 - 24 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 114 099 000 - 60643563
196 Reallocated_Event_Count PO--CK 070 070 036 - 1263
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xb6 GPL VS 1918 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 170 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 170 [9] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 57 38 00 00 Error: IDNF at LBA = 0x18005738 = 402675512
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 57 38 40 00 3d+15:56:12.465 WRITE FPDMA QUEUED
60 00 00 01 70 00 00 23 1c e5 20 40 00 3d+15:56:12.348 READ FPDMA QUEUED
60 00 00 01 70 00 00 23 1c e3 20 40 00 3d+15:56:12.341 READ FPDMA QUEUED
60 00 00 01 88 00 00 23 1c e1 10 40 00 3d+15:56:12.341 READ FPDMA QUEUED
60 00 00 01 f8 00 00 23 1c de b8 40 00 3d+15:56:12.340 READ FPDMA QUEUED
Error 169 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 18 00 4c b0 00 00 Error: IDNF at LBA = 0x18004cb0 = 402672816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 18 00 4c b0 40 00 3d+15:55:58.728 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 93 9f 70 40 00 3d+15:55:58.717 WRITE FPDMA QUEUED
60 00 00 00 48 00 00 23 17 29 00 40 00 3d+15:55:58.699 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 17 29 48 40 00 3d+15:55:58.699 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 81 96 88 40 00 3d+15:55:58.690 WRITE FPDMA QUEUED
Error 168 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 81 4c 42 00 00 Error: IDNF at LBA = 0x22814c42 = 578899010
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 81 4c 40 40 00 3d+15:55:42.813 WRITE FPDMA QUEUED
60 00 00 02 00 00 00 21 83 a7 d8 40 00 3d+15:55:42.805 READ FPDMA QUEUED
60 00 00 02 00 00 00 21 83 a5 d8 40 00 3d+15:55:42.797 READ FPDMA QUEUED
60 00 00 00 28 00 00 23 11 c8 30 40 00 3d+15:55:42.775 READ FPDMA QUEUED
60 00 00 00 18 00 00 23 11 c7 b0 40 00 3d+15:55:42.768 READ FPDMA QUEUED
Error 167 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 85 7c 20 00 00 Error: IDNF at LBA = 0x21857c20 = 562396192
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 21 85 7c 20 40 00 3d+15:55:39.254 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 30 69 c0 40 00 3d+15:55:39.248 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 18 00 4c 80 40 00 3d+15:55:39.243 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 18 00 47 c0 40 00 3d+15:55:39.229 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 92 dd 60 40 00 3d+15:55:39.223 WRITE FPDMA QUEUED
Error 166 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 85 7c 18 00 00 Error: IDNF at LBA = 0x21857c18 = 562396184
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 21 85 7c 18 40 00 3d+15:55:38.798 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 92 b9 80 40 00 3d+15:55:38.787 WRITE FPDMA QUEUED
60 00 00 00 20 00 00 23 10 95 60 40 00 3d+15:55:38.773 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 10 96 70 40 00 3d+15:55:38.772 READ FPDMA QUEUED
60 00 00 00 20 00 00 23 10 95 c8 40 00 3d+15:55:38.772 READ FPDMA QUEUED
Error 165 [4] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 80 ea 08 00 00 Error: IDNF at LBA = 0x2280ea08 = 578873864
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 80 ea 08 40 00 3d+15:55:23.509 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 21 83 3f 98 40 00 3d+15:55:23.499 READ FPDMA QUEUED
60 00 00 00 28 00 00 23 0b 76 b0 40 00 3d+15:55:23.494 READ FPDMA QUEUED
60 00 00 00 08 00 00 21 83 3f 60 40 00 3d+15:55:23.494 READ FPDMA QUEUED
60 00 00 00 28 00 00 23 0b 77 28 40 00 3d+15:55:23.493 READ FPDMA QUEUED
Error 164 [3] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 22 80 b6 80 00 00 Error: IDNF at LBA = 0x2280b680 = 578860672
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 08 00 00 22 80 b6 80 40 00 3d+15:55:11.876 WRITE FPDMA QUEUED
60 00 00 00 10 00 00 23 07 a0 28 40 00 3d+15:55:11.870 READ FPDMA QUEUED
61 00 00 00 08 00 00 22 80 b7 d8 40 00 3d+15:55:11.862 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 80 b7 a8 40 00 3d+15:55:11.853 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 22 80 b7 90 40 00 3d+15:55:11.845 WRITE FPDMA QUEUED
Error 163 [2] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 21 81 f4 48 00 00 Error: IDNF at LBA = 0x2181f448 = 562164808
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 10 00 00 21 81 f4 48 40 00 3d+15:54:33.010 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 21 2b 14 50 40 00 3d+15:54:32.998 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 18 00 35 20 40 00 3d+15:54:32.985 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 02 90 ac 28 40 00 3d+15:54:32.975 WRITE FPDMA QUEUED
61 00 00 00 88 00 00 23 04 0c 58 40 00 3d+15:54:32.607 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44780 -
# 2 Short offline Completed without error 00% 44756 -
# 3 Short offline Completed without error 00% 44733 -
# 4 Short offline Completed without error 00% 44708 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 24 Celsius
Power Cycle Min/Max Temperature: 12/25 Celsius
Lifetime Min/Max Temperature: 10/53 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (66)
SCT Error Recovery Control:
Read: 100 (10.0 seconds)
Write: 100 (10.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 126 --- Lifetime Power-On Resets
0x01 0x010 4 45207 --- Power-on Hours
0x01 0x018 6 12554479325 --- Logical Sectors Written
0x01 0x020 6 30554351 --- Number of Write Commands
0x01 0x028 6 54336032174 --- Logical Sectors Read
0x01 0x030 6 146350778 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
0x03 0x010 4 45210 --- Head Flying Hours
0x03 0x018 4 1996 --- Head Load Events
0x03 0x020 4 1263 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

203
HDD/HPE/MM1000/MM1000GFJTE/6570CFEA7235 Normal file
View File

@@ -0,0 +1,203 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MM1000GFJTE
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPG1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Nov 11 20:25:37 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 177) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x1025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 081 064 044 - 130927154
3 Spin_Up_Time PO---- 095 095 070 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 083 060 030 - 213869271
9 Power_On_Hours -O--CK 095 095 000 - 5238
10 Spin_Retry_Count PO--C- 100 100 097 - 0
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 3793117354
194 Temperature_Celsius -O---K 030 043 000 - 30 (0 22 0 0 0)
196 Reallocated_Event_Count PO--CK 100 100 010 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 8160 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 8840 Device vendor specific log
0xb5 SL VS 1 Device vendor specific log
0xb6 GPL VS 16385 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xd0 GPL VS 1 Device vendor specific log
0xd7 GPL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 29/32 Celsius
Lifetime Min/Max Temperature: 21/42 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/47
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (12)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 37 --- Lifetime Power-On Resets
0x01 0x010 4 5238 --- Power-on Hours
0x01 0x018 6 3779927327 --- Logical Sectors Written
0x01 0x020 6 159545963 --- Number of Write Commands
0x01 0x028 6 17647002 --- Logical Sectors Read
0x01 0x030 6 249940 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 5213 --- Spindle Motor Power-on Hours
0x03 0x010 4 5213 --- Head Flying Hours
0x03 0x018 4 248 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 26 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 29 --- Average Short Term Temperature
0x05 0x018 1 29 --- Average Long Term Temperature
0x05 0x020 1 43 --- Highest Temperature
0x05 0x028 1 22 --- Lowest Temperature
0x05 0x030 1 31 --- Highest Average Short Term Temperature
0x05 0x038 1 28 --- Lowest Average Short Term Temperature
0x05 0x040 1 29 --- Highest Average Long Term Temperature
0x05 0x048 1 28 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 13 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 181 --- Number of Hardware Resets
0x06 0x010 4 33 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS