mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
353
HDD/HPE/MM1000/MM1000GBKAL/38175C0428E4
Normal file
353
HDD/HPE/MM1000/MM1000GBKAL/38175C0428E4
Normal file
@@ -0,0 +1,353 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Constellation.2 (SATA)
|
||||
Device Model: MM1000GBKAL
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: HPGE
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Nov 24 21:41:33 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Disabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 634) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 200) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x103d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 081 063 044 - 166048801
|
||||
3 Spin_Up_Time PO---- 094 094 070 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 127
|
||||
5 Reallocated_Sector_Ct PO--CK 081 081 036 - 787
|
||||
7 Seek_Error_Rate POSR-- 075 060 030 - 34857299
|
||||
9 Power_On_Hours -O--CK 049 049 000 - 45206
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 126
|
||||
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1976310000
|
||||
184 End-to-End_Error -O--CK 100 100 003 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 076 049 045 - 24 (Min/Max 12/24)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 1990
|
||||
194 Temperature_Celsius -O---K 024 051 000 - 24 (0 9 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 117 099 000 - 166048801
|
||||
196 Reallocated_Event_Count PO--CK 081 081 036 - 787
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 4496 Device vendor specific log
|
||||
0xa8 GPL,SL VS 129 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 5176 Device vendor specific log
|
||||
0xb6 GPL VS 1918 Device vendor specific log
|
||||
0xbd GPL VS 252 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 104 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 104 [3] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 81 9c 28 00 00 Error: IDNF at LBA = 0x22819c28 = 578919464
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 81 9c 28 40 00 3d+15:55:57.924 WRITE FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 17 48 70 40 00 3d+15:55:57.852 READ FPDMA QUEUED
|
||||
60 00 00 00 e8 00 00 23 17 47 88 40 00 3d+15:55:57.842 READ FPDMA QUEUED
|
||||
60 00 00 00 38 00 00 23 17 46 90 40 00 3d+15:55:57.842 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 17 44 90 40 00 3d+15:55:57.841 READ FPDMA QUEUED
|
||||
|
||||
Error 103 [2] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 00 4c 98 00 00 Error: IDNF at LBA = 0x18004c98 = 402672792
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 00 4c 98 40 00 3d+15:55:50.180 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 05 80 28 b0 40 00 3d+15:55:50.170 WRITE FPDMA QUEUED
|
||||
60 00 00 01 78 00 00 23 15 03 78 40 00 3d+15:55:50.063 READ FPDMA QUEUED
|
||||
60 00 00 01 38 00 00 23 15 01 e0 40 00 3d+15:55:50.060 READ FPDMA QUEUED
|
||||
60 00 00 00 90 00 00 23 15 00 c0 40 00 3d+15:55:50.059 READ FPDMA QUEUED
|
||||
|
||||
Error 102 [1] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 81 53 d0 00 00 Error: IDNF at LBA = 0x228153d0 = 578900944
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 81 53 d0 40 00 3d+15:55:42.428 WRITE FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 83 b4 e0 40 00 3d+15:55:42.427 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 83 b4 d0 40 00 3d+15:55:42.423 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 83 b4 d8 40 00 3d+15:55:42.422 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 83 b4 c8 40 00 3d+15:55:42.418 READ FPDMA QUEUED
|
||||
|
||||
Error 101 [0] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 80 fd 28 00 00 Error: IDNF at LBA = 0x2280fd28 = 578878760
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 80 fd 28 40 00 3d+15:55:26.266 WRITE FPDMA QUEUED
|
||||
60 00 00 00 c0 00 00 23 0c d3 f0 40 00 3d+15:55:26.257 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 80 fd 88 40 00 3d+15:55:26.248 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 80 fd 40 40 00 3d+15:55:26.238 WRITE FPDMA QUEUED
|
||||
60 00 00 00 30 00 00 23 0c c9 68 40 00 3d+15:55:26.224 READ FPDMA QUEUED
|
||||
|
||||
Error 100 [19] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 23 05 34 00 00 00 Error: IDNF at LBA = 0x23053400 = 587543552
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 40 00 00 23 05 34 00 40 00 3d+15:54:42.693 WRITE FPDMA QUEUED
|
||||
61 00 00 00 58 00 00 23 05 33 a0 40 00 3d+15:54:42.685 WRITE FPDMA QUEUED
|
||||
61 00 00 00 60 00 00 23 05 33 38 40 00 3d+15:54:42.676 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 23 05 32 f0 40 00 3d+15:54:42.667 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 23 05 32 a8 40 00 3d+15:54:42.659 WRITE FPDMA QUEUED
|
||||
|
||||
Error 99 [18] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 86 dd a0 00 00 Error: IDNF at LBA = 0x2186dda0 = 562486688
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 21 86 dd a0 40 00 3d+15:51:11.661 WRITE FPDMA QUEUED
|
||||
61 00 00 00 18 00 00 18 1e 64 98 40 00 3d+15:51:11.651 WRITE FPDMA QUEUED
|
||||
61 00 00 00 48 00 00 24 80 80 a0 40 00 3d+15:51:11.645 WRITE FPDMA QUEUED
|
||||
61 00 00 00 10 00 00 24 00 32 80 40 00 3d+15:51:11.638 WRITE FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 23 80 67 d0 40 00 3d+15:51:11.629 WRITE FPDMA QUEUED
|
||||
|
||||
Error 98 [17] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 82 5d 40 00 00 Error: IDNF at LBA = 0x21825d40 = 562191680
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 21 82 5d 40 40 00 3d+15:51:05.739 WRITE FPDMA QUEUED
|
||||
60 00 00 00 10 00 00 23 02 62 98 40 00 3d+15:51:05.729 READ FPDMA QUEUED
|
||||
61 00 00 00 80 00 00 22 80 4e 08 40 00 3d+15:51:05.720 WRITE FPDMA QUEUED
|
||||
61 00 00 00 10 00 00 22 80 4d f0 40 00 3d+15:51:05.712 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 80 4d e0 40 00 3d+15:51:05.703 WRITE FPDMA QUEUED
|
||||
|
||||
Error 97 [16] occurred at disk power-on lifetime: 44763 hours (1865 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 86 d5 80 00 00 Error: IDNF at LBA = 0x2186d580 = 562484608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 10 00 00 21 86 d5 80 40 00 3d+15:50:50.028 WRITE FPDMA QUEUED
|
||||
60 00 00 00 78 00 00 24 80 2d 78 40 00 3d+15:50:50.016 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 86 d5 80 40 00 3d+15:50:50.013 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 86 d3 18 40 00 3d+15:50:50.012 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 86 d2 00 40 00 3d+15:50:50.003 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 44779 -
|
||||
# 2 Short offline Completed without error 00% 44755 -
|
||||
# 3 Short offline Completed without error 00% 44732 -
|
||||
# 4 Short offline Completed without error 00% 44707 -
|
||||
# 5 Short offline Completed without error 00% 44703 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: 12/24 Celsius
|
||||
Lifetime Min/Max Temperature: 9/51 Celsius
|
||||
Specified Max Operating Temperature: 60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 10 minutes
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 128 (64)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 100 (10.0 seconds)
|
||||
Write: 100 (10.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 126 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 45206 --- Power-on Hours
|
||||
0x01 0x018 6 12552860146 --- Logical Sectors Written
|
||||
0x01 0x020 6 31069158 --- Number of Write Commands
|
||||
0x01 0x028 6 54522273303 --- Logical Sectors Read
|
||||
0x01 0x030 6 147509778 --- Number of Read Commands
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 45209 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 45209 --- Head Flying Hours
|
||||
0x03 0x018 4 1990 --- Head Load Events
|
||||
0x03 0x020 4 787 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
353
HDD/HPE/MM1000/MM1000GBKAL/6167FD60916E
Normal file
353
HDD/HPE/MM1000/MM1000GBKAL/6167FD60916E
Normal file
@@ -0,0 +1,353 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Constellation.2 (SATA)
|
||||
Device Model: MM1000GBKAL
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: HPGE
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Nov 24 21:41:33 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Disabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 642) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 204) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x103d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 082 063 044 - 182229588
|
||||
3 Spin_Up_Time PO---- 094 094 070 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 127
|
||||
5 Reallocated_Sector_Ct PO--CK 095 095 036 - 237
|
||||
7 Seek_Error_Rate POSR-- 081 060 030 - 140946336
|
||||
9 Power_On_Hours -O--CK 049 049 000 - 45207
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 126
|
||||
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 189036646
|
||||
184 End-to-End_Error -O--CK 100 100 003 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 076 051 045 - 24 (Min/Max 13/25)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 1990
|
||||
194 Temperature_Celsius -O---K 024 049 000 - 24 (0 11 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 118 099 000 - 182229588
|
||||
196 Reallocated_Event_Count PO--CK 095 095 036 - 237
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 4496 Device vendor specific log
|
||||
0xa8 GPL,SL VS 129 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 5176 Device vendor specific log
|
||||
0xb6 GPL VS 1918 Device vendor specific log
|
||||
0xbd GPL VS 252 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 33 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 33 [12] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 1e 12 c8 00 00 Error: IDNF at LBA = 0x181e12c8 = 404624072
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 1e 12 c8 40 00 3d+15:56:32.197 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 05 80 28 f0 40 00 3d+15:56:32.185 WRITE FPDMA QUEUED
|
||||
60 00 00 00 60 00 00 23 23 b6 f0 40 00 3d+15:56:32.162 READ FPDMA QUEUED
|
||||
60 00 00 00 18 00 00 23 23 b6 d8 40 00 3d+15:56:32.162 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 82 54 80 40 00 3d+15:56:32.141 WRITE FPDMA QUEUED
|
||||
|
||||
Error 32 [11] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 05 80 28 d0 00 00 Error: IDNF at LBA = 0x058028d0 = 92285136
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 05 80 28 d0 40 00 3d+15:56:05.463 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 18 00 57 30 40 00 3d+15:56:05.441 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 05 80 28 d0 40 00 3d+15:56:05.435 WRITE FPDMA QUEUED
|
||||
61 00 00 00 18 00 00 02 94 5d 80 40 00 3d+15:56:05.429 WRITE FPDMA QUEUED
|
||||
61 00 00 00 30 00 00 02 94 3a 08 40 00 3d+15:56:05.412 WRITE FPDMA QUEUED
|
||||
|
||||
Error 31 [10] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 1e 5f f8 00 00 Error: IDNF at LBA = 0x181e5ff8 = 404643832
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 28 00 00 18 1e 5f f8 40 00 3d+15:49:58.221 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 02 9f 8b 78 40 00 3d+15:49:58.211 WRITE FPDMA QUEUED
|
||||
61 00 00 00 50 00 00 24 80 79 a8 40 00 3d+15:49:58.204 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 24 00 31 b8 40 00 3d+15:49:58.196 WRITE FPDMA QUEUED
|
||||
61 00 00 00 28 00 00 23 80 63 30 40 00 3d+15:49:58.188 WRITE FPDMA QUEUED
|
||||
|
||||
Error 30 [9] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 1e 5f 00 00 00 Error: IDNF at LBA = 0x181e5f00 = 404643584
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 1e 5f 00 40 00 3d+15:49:38.462 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 18 1e 5e f8 40 00 3d+15:49:38.456 WRITE FPDMA QUEUED
|
||||
60 00 00 01 c0 00 00 23 19 e2 18 40 00 3d+15:49:38.453 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 19 e0 18 40 00 3d+15:49:38.449 READ FPDMA QUEUED
|
||||
60 00 00 01 78 00 00 23 19 de 10 40 00 3d+15:49:38.447 READ FPDMA QUEUED
|
||||
|
||||
Error 29 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 1e 58 40 00 00 Error: IDNF at LBA = 0x181e5840 = 404641856
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 1e 58 40 40 00 3d+15:47:16.912 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 30 6e c8 40 00 3d+15:47:16.903 WRITE FPDMA QUEUED
|
||||
60 00 00 00 c8 00 00 23 30 5b b0 40 00 3d+15:47:16.898 READ FPDMA QUEUED
|
||||
60 00 00 01 40 00 00 23 30 5a 18 40 00 3d+15:47:16.888 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 30 58 18 40 00 3d+15:47:16.887 READ FPDMA QUEUED
|
||||
|
||||
Error 28 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 1e 57 b8 00 00 Error: IDNF at LBA = 0x181e57b8 = 404641720
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 1e 57 b8 40 00 3d+15:47:03.849 WRITE FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 24 80 6d 10 40 00 3d+15:47:03.840 WRITE FPDMA QUEUED
|
||||
61 00 00 00 10 00 00 24 80 6c f8 40 00 3d+15:47:03.832 WRITE FPDMA QUEUED
|
||||
61 00 00 00 10 00 00 24 80 6c d8 40 00 3d+15:47:03.821 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 24 00 30 50 40 00 3d+15:47:03.814 WRITE FPDMA QUEUED
|
||||
|
||||
Error 27 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 23 80 52 d8 00 00 Error: IDNF at LBA = 0x238052d8 = 595612376
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 23 80 52 d8 40 00 3d+15:44:02.266 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 23 33 d0 f8 40 00 3d+15:44:02.260 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 83 61 30 40 00 3d+15:44:02.251 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 86 d7 c0 40 00 3d+15:44:02.242 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 24 80 5f b8 40 00 3d+15:44:02.213 WRITE FPDMA QUEUED
|
||||
|
||||
Error 26 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 1e 4d d8 00 00 Error: IDNF at LBA = 0x181e4dd8 = 404639192
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 1e 4d d8 40 00 3d+15:43:21.352 WRITE FPDMA QUEUED
|
||||
60 00 00 00 48 00 00 23 24 7b a8 40 00 3d+15:43:21.352 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 24 7b f0 40 00 3d+15:43:21.351 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 82 66 08 40 00 3d+15:43:21.343 WRITE FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 24 7a c8 40 00 3d+15:43:21.328 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 44780 -
|
||||
# 2 Short offline Completed without error 00% 44756 -
|
||||
# 3 Short offline Completed without error 00% 44733 -
|
||||
# 4 Short offline Completed without error 00% 44708 -
|
||||
# 5 Short offline Completed without error 00% 44430 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: 13/25 Celsius
|
||||
Lifetime Min/Max Temperature: 11/48 Celsius
|
||||
Specified Max Operating Temperature: 60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 10 minutes
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 128 (121)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 100 (10.0 seconds)
|
||||
Write: 100 (10.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 126 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 45207 --- Power-on Hours
|
||||
0x01 0x018 6 12607431482 --- Logical Sectors Written
|
||||
0x01 0x020 6 84209927 --- Number of Write Commands
|
||||
0x01 0x028 6 55042730696 --- Logical Sectors Read
|
||||
0x01 0x030 6 200988889 --- Number of Read Commands
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 45210 --- Head Flying Hours
|
||||
0x03 0x018 4 1990 --- Head Load Events
|
||||
0x03 0x020 4 237 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
352
HDD/HPE/MM1000/MM1000GBKAL/F1658F9937EE
Normal file
352
HDD/HPE/MM1000/MM1000GBKAL/F1658F9937EE
Normal file
@@ -0,0 +1,352 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Constellation.2 (SATA)
|
||||
Device Model: MM1000GBKAL
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: HPGE
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Nov 24 21:41:32 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Disabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 634) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 206) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x103d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 084 063 044 - 237961160
|
||||
3 Spin_Up_Time PO---- 094 094 070 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 127
|
||||
5 Reallocated_Sector_Ct PO--CK 073 073 036 - 1106
|
||||
7 Seek_Error_Rate POSR-- 075 060 030 - 34629268
|
||||
9 Power_On_Hours -O--CK 049 049 000 - 45207
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 126
|
||||
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1545705648
|
||||
184 End-to-End_Error -O--CK 100 100 003 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 076 047 045 - 24 (Min/Max 12/24)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 1998
|
||||
194 Temperature_Celsius -O---K 024 053 000 - 24 (0 10 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 120 099 000 - 237961160
|
||||
196 Reallocated_Event_Count PO--CK 073 073 036 - 1106
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 4496 Device vendor specific log
|
||||
0xa8 GPL,SL VS 129 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 5176 Device vendor specific log
|
||||
0xb6 GPL VS 1918 Device vendor specific log
|
||||
0xbd GPL VS 252 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 149 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 149 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 82 2f c0 00 00 Error: IDNF at LBA = 0x22822fc0 = 578957248
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 82 2f c0 40 00 3d+15:56:24.205 WRITE FPDMA QUEUED
|
||||
60 00 00 00 f0 00 00 23 21 3c c0 40 00 3d+15:56:24.204 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 21 3a c0 40 00 3d+15:56:24.195 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 82 30 20 40 00 3d+15:56:24.186 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 82 2f a8 40 00 3d+15:56:24.175 WRITE FPDMA QUEUED
|
||||
|
||||
Error 148 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 82 2a 38 00 00 Error: IDNF at LBA = 0x22822a38 = 578955832
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 82 2a 38 40 00 3d+15:56:23.232 WRITE FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 21 92 40 40 00 3d+15:56:23.222 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 82 2f 10 40 00 3d+15:56:23.201 WRITE FPDMA QUEUED
|
||||
60 00 00 00 68 00 00 23 21 93 28 40 00 3d+15:56:23.201 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 21 93 50 40 00 3d+15:56:23.201 READ FPDMA QUEUED
|
||||
|
||||
Error 147 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 81 f3 80 00 00 Error: IDNF at LBA = 0x2281f380 = 578941824
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 81 f3 80 40 00 3d+15:56:12.772 WRITE FPDMA QUEUED
|
||||
60 00 00 00 28 00 00 23 1c d9 90 40 00 3d+15:56:12.745 READ FPDMA QUEUED
|
||||
60 00 00 00 b8 00 00 23 1c d8 60 40 00 3d+15:56:12.738 READ FPDMA QUEUED
|
||||
60 00 00 00 40 00 00 23 1c d4 00 40 00 3d+15:56:12.737 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 23 1c d2 b8 40 00 3d+15:56:12.736 READ FPDMA QUEUED
|
||||
|
||||
Error 146 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 81 ef 08 00 00 Error: IDNF at LBA = 0x2281ef08 = 578940680
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 81 ef 08 40 00 3d+15:56:11.561 WRITE FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 84 7d f0 40 00 3d+15:56:11.561 READ FPDMA QUEUED
|
||||
60 00 00 00 10 00 00 21 84 7d 80 40 00 3d+15:56:11.561 READ FPDMA QUEUED
|
||||
60 00 00 00 b8 00 00 21 84 7c c8 40 00 3d+15:56:11.560 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 23 1c 75 f0 40 00 3d+15:56:11.482 READ FPDMA QUEUED
|
||||
|
||||
Error 145 [4] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 00 4c b0 00 00 Error: IDNF at LBA = 0x18004cb0 = 402672816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 00 4c b0 40 00 3d+15:56:00.152 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 05 80 28 c0 40 00 3d+15:56:00.143 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 02 93 9f 78 40 00 3d+15:56:00.131 WRITE FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 17 29 28 40 00 3d+15:56:00.113 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 17 29 00 40 00 3d+15:56:00.113 READ FPDMA QUEUED
|
||||
|
||||
Error 144 [3] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 81 2d 08 00 00 Error: IDNF at LBA = 0x22812d08 = 578891016
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 81 2d 08 40 00 3d+15:55:38.383 WRITE FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 0f fb 28 40 00 3d+15:55:38.353 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 0f f9 28 40 00 3d+15:55:38.346 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 23 0f f7 28 40 00 3d+15:55:38.345 READ FPDMA QUEUED
|
||||
60 00 00 01 c8 00 00 23 0f f4 f8 40 00 3d+15:55:38.344 READ FPDMA QUEUED
|
||||
|
||||
Error 143 [2] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 00 2a e0 00 00 Error: IDNF at LBA = 0x18002ae0 = 402664160
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 00 2a e0 40 00 3d+15:54:08.975 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 00 2b 48 40 00 3d+15:54:08.933 WRITE FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 86 d9 40 40 00 3d+15:54:08.884 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 86 d5 88 40 00 3d+15:54:08.817 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 05 80 28 00 40 00 3d+15:54:08.798 WRITE FPDMA QUEUED
|
||||
|
||||
Error 142 [1] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 86 dd a0 00 00 Error: IDNF at LBA = 0x2186dda0 = 562486688
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 10 00 00 21 86 dd a0 40 00 3d+15:51:15.457 WRITE FPDMA QUEUED
|
||||
61 00 00 00 20 00 00 18 1e 64 98 40 00 3d+15:51:15.449 WRITE FPDMA QUEUED
|
||||
61 00 00 00 48 00 00 24 80 80 a0 40 00 3d+15:51:15.440 WRITE FPDMA QUEUED
|
||||
61 00 00 00 18 00 00 24 00 32 80 40 00 3d+15:51:15.431 WRITE FPDMA QUEUED
|
||||
61 00 00 00 18 00 00 23 80 67 d8 40 00 3d+15:51:15.422 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 44779 -
|
||||
# 2 Short offline Completed without error 00% 44756 -
|
||||
# 3 Short offline Completed without error 00% 44732 -
|
||||
# 4 Short offline Completed without error 00% 44708 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: 12/24 Celsius
|
||||
Lifetime Min/Max Temperature: 10/53 Celsius
|
||||
Specified Max Operating Temperature: 60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 10 minutes
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 128 (14)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 100 (10.0 seconds)
|
||||
Write: 100 (10.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 126 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 45207 --- Power-on Hours
|
||||
0x01 0x018 6 12523256080 --- Logical Sectors Written
|
||||
0x01 0x020 6 31039985 --- Number of Write Commands
|
||||
0x01 0x028 6 54225506715 --- Logical Sectors Read
|
||||
0x01 0x030 6 146907177 --- Number of Read Commands
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 45210 --- Head Flying Hours
|
||||
0x03 0x018 4 1998 --- Head Load Events
|
||||
0x03 0x020 4 1106 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
352
HDD/HPE/MM1000/MM1000GBKAL/F2D5A10F5B10
Normal file
352
HDD/HPE/MM1000/MM1000GBKAL/F2D5A10F5B10
Normal file
@@ -0,0 +1,352 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Constellation.2 (SATA)
|
||||
Device Model: MM1000GBKAL
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: HPGE
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Nov 24 21:41:32 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Disabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 634) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 205) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x103d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 078 063 044 - 60643563
|
||||
3 Spin_Up_Time PO---- 094 094 070 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 127
|
||||
5 Reallocated_Sector_Ct PO--CK 070 070 036 - 1263
|
||||
7 Seek_Error_Rate POSR-- 075 060 030 - 33945416
|
||||
9 Power_On_Hours -O--CK 049 049 000 - 45207
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 126
|
||||
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 1543766816
|
||||
184 End-to-End_Error -O--CK 100 100 003 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 099 099 000 - 1
|
||||
190 Airflow_Temperature_Cel -O---K 076 047 045 - 24 (Min/Max 12/25)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 125
|
||||
193 Load_Cycle_Count -O--CK 100 100 000 - 1996
|
||||
194 Temperature_Celsius -O---K 024 053 000 - 24 (0 10 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 114 099 000 - 60643563
|
||||
196 Reallocated_Event_Count PO--CK 070 070 036 - 1263
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x12 GPL,SL R/O 1 SATA NCQ Non-Data log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 4496 Device vendor specific log
|
||||
0xa8 GPL,SL VS 129 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 5176 Device vendor specific log
|
||||
0xb6 GPL VS 1918 Device vendor specific log
|
||||
0xbd GPL VS 252 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 170 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 170 [9] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 00 57 38 00 00 Error: IDNF at LBA = 0x18005738 = 402675512
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 00 57 38 40 00 3d+15:56:12.465 WRITE FPDMA QUEUED
|
||||
60 00 00 01 70 00 00 23 1c e5 20 40 00 3d+15:56:12.348 READ FPDMA QUEUED
|
||||
60 00 00 01 70 00 00 23 1c e3 20 40 00 3d+15:56:12.341 READ FPDMA QUEUED
|
||||
60 00 00 01 88 00 00 23 1c e1 10 40 00 3d+15:56:12.341 READ FPDMA QUEUED
|
||||
60 00 00 01 f8 00 00 23 1c de b8 40 00 3d+15:56:12.340 READ FPDMA QUEUED
|
||||
|
||||
Error 169 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 18 00 4c b0 00 00 Error: IDNF at LBA = 0x18004cb0 = 402672816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 18 00 4c b0 40 00 3d+15:55:58.728 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 02 93 9f 70 40 00 3d+15:55:58.717 WRITE FPDMA QUEUED
|
||||
60 00 00 00 48 00 00 23 17 29 00 40 00 3d+15:55:58.699 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 17 29 48 40 00 3d+15:55:58.699 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 81 96 88 40 00 3d+15:55:58.690 WRITE FPDMA QUEUED
|
||||
|
||||
Error 168 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 81 4c 42 00 00 Error: IDNF at LBA = 0x22814c42 = 578899010
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 81 4c 40 40 00 3d+15:55:42.813 WRITE FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 21 83 a7 d8 40 00 3d+15:55:42.805 READ FPDMA QUEUED
|
||||
60 00 00 02 00 00 00 21 83 a5 d8 40 00 3d+15:55:42.797 READ FPDMA QUEUED
|
||||
60 00 00 00 28 00 00 23 11 c8 30 40 00 3d+15:55:42.775 READ FPDMA QUEUED
|
||||
60 00 00 00 18 00 00 23 11 c7 b0 40 00 3d+15:55:42.768 READ FPDMA QUEUED
|
||||
|
||||
Error 167 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 85 7c 20 00 00 Error: IDNF at LBA = 0x21857c20 = 562396192
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 21 85 7c 20 40 00 3d+15:55:39.254 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 30 69 c0 40 00 3d+15:55:39.248 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 18 00 4c 80 40 00 3d+15:55:39.243 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 18 00 47 c0 40 00 3d+15:55:39.229 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 02 92 dd 60 40 00 3d+15:55:39.223 WRITE FPDMA QUEUED
|
||||
|
||||
Error 166 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 85 7c 18 00 00 Error: IDNF at LBA = 0x21857c18 = 562396184
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 21 85 7c 18 40 00 3d+15:55:38.798 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 02 92 b9 80 40 00 3d+15:55:38.787 WRITE FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 10 95 60 40 00 3d+15:55:38.773 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 10 96 70 40 00 3d+15:55:38.772 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 23 10 95 c8 40 00 3d+15:55:38.772 READ FPDMA QUEUED
|
||||
|
||||
Error 165 [4] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 80 ea 08 00 00 Error: IDNF at LBA = 0x2280ea08 = 578873864
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 80 ea 08 40 00 3d+15:55:23.509 WRITE FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 83 3f 98 40 00 3d+15:55:23.499 READ FPDMA QUEUED
|
||||
60 00 00 00 28 00 00 23 0b 76 b0 40 00 3d+15:55:23.494 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 21 83 3f 60 40 00 3d+15:55:23.494 READ FPDMA QUEUED
|
||||
60 00 00 00 28 00 00 23 0b 77 28 40 00 3d+15:55:23.493 READ FPDMA QUEUED
|
||||
|
||||
Error 164 [3] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 22 80 b6 80 00 00 Error: IDNF at LBA = 0x2280b680 = 578860672
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 08 00 00 22 80 b6 80 40 00 3d+15:55:11.876 WRITE FPDMA QUEUED
|
||||
60 00 00 00 10 00 00 23 07 a0 28 40 00 3d+15:55:11.870 READ FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 80 b7 d8 40 00 3d+15:55:11.862 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 80 b7 a8 40 00 3d+15:55:11.853 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 22 80 b7 90 40 00 3d+15:55:11.845 WRITE FPDMA QUEUED
|
||||
|
||||
Error 163 [2] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 21 81 f4 48 00 00 Error: IDNF at LBA = 0x2181f448 = 562164808
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 10 00 00 21 81 f4 48 40 00 3d+15:54:33.010 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 21 2b 14 50 40 00 3d+15:54:32.998 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 18 00 35 20 40 00 3d+15:54:32.985 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 02 90 ac 28 40 00 3d+15:54:32.975 WRITE FPDMA QUEUED
|
||||
61 00 00 00 88 00 00 23 04 0c 58 40 00 3d+15:54:32.607 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 44780 -
|
||||
# 2 Short offline Completed without error 00% 44756 -
|
||||
# 3 Short offline Completed without error 00% 44733 -
|
||||
# 4 Short offline Completed without error 00% 44708 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: 12/25 Celsius
|
||||
Lifetime Min/Max Temperature: 10/53 Celsius
|
||||
Specified Max Operating Temperature: 60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 10 minutes
|
||||
Min/Max recommended Temperature: 5/60 Celsius
|
||||
Min/Max Temperature Limit: -40/70 Celsius
|
||||
Temperature History Size (Index): 128 (66)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 100 (10.0 seconds)
|
||||
Write: 100 (10.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 126 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 45207 --- Power-on Hours
|
||||
0x01 0x018 6 12554479325 --- Logical Sectors Written
|
||||
0x01 0x020 6 30554351 --- Number of Write Commands
|
||||
0x01 0x028 6 54336032174 --- Logical Sectors Read
|
||||
0x01 0x030 6 146350778 --- Number of Read Commands
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 45210 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 45210 --- Head Flying Hours
|
||||
0x03 0x018 4 1996 --- Head Load Events
|
||||
0x03 0x020 4 1263 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
203
HDD/HPE/MM1000/MM1000GFJTE/6570CFEA7235
Normal file
203
HDD/HPE/MM1000/MM1000GFJTE/6570CFEA7235
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: MM1000GFJTE
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: HPG1
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Nov 11 20:25:37 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 617) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 177) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x1025) SCT Status supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 081 064 044 - 130927154
|
||||
3 Spin_Up_Time PO---- 095 095 070 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 083 060 030 - 213869271
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 5238
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 3793117354
|
||||
194 Temperature_Celsius -O---K 030 043 000 - 30 (0 22 0 0 0)
|
||||
196 Reallocated_Event_Count PO--CK 100 100 010 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x08 GPL R/O 2 Power Conditions log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x24 GPL R/O 512 Current Device Internal Status Data log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 8160 Device vendor specific log
|
||||
0xa8 GPL,SL VS 129 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 8840 Device vendor specific log
|
||||
0xb5 SL VS 1 Device vendor specific log
|
||||
0xb6 GPL VS 16385 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xc1 GPL,SL VS 10 Device vendor specific log
|
||||
0xc3 GPL,SL VS 8 Device vendor specific log
|
||||
0xd0 GPL VS 1 Device vendor specific log
|
||||
0xd7 GPL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: 29/32 Celsius
|
||||
Lifetime Min/Max Temperature: 21/42 Celsius
|
||||
Specified Max Operating Temperature: 60 Celsius
|
||||
Under/Over Temperature Limit Count: 0/47
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 59 minutes
|
||||
Min/Max recommended Temperature: 0/ 0 Celsius
|
||||
Min/Max Temperature Limit: 0/ 0 Celsius
|
||||
Temperature History Size (Index): 128 (12)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 37 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5238 --- Power-on Hours
|
||||
0x01 0x018 6 3779927327 --- Logical Sectors Written
|
||||
0x01 0x020 6 159545963 --- Number of Write Commands
|
||||
0x01 0x028 6 17647002 --- Logical Sectors Read
|
||||
0x01 0x030 6 249940 --- Number of Read Commands
|
||||
0x01 0x038 6 - --- Date and Time TimeStamp
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 5213 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 5213 --- Head Flying Hours
|
||||
0x03 0x018 4 248 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
||||
0x03 0x040 4 26 --- Number of High Priority Unload Events
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 30 --- Current Temperature
|
||||
0x05 0x010 1 29 --- Average Short Term Temperature
|
||||
0x05 0x018 1 29 --- Average Long Term Temperature
|
||||
0x05 0x020 1 43 --- Highest Temperature
|
||||
0x05 0x028 1 22 --- Lowest Temperature
|
||||
0x05 0x030 1 31 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 28 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 29 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 28 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 13 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 181 --- Number of Hardware Resets
|
||||
0x06 0x010 4 33 --- Number of ASR Events
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
Reference in New Issue
Block a user