mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
198
HDD/Maxtor/6E040/6E040L0/C4665EA87ABD
Normal file
198
HDD/Maxtor/6E040/6E040L0/C4665EA87ABD
Normal file
@@ -0,0 +1,198 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [NetBSD 9.3_STABLE sparc64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Maxtor DiamondMax Plus 8
|
||||
Device Model: Maxtor 6E040L0
|
||||
Serial Number: --
|
||||
Firmware Version: NAR61HA0
|
||||
User Capacity: 40,020,664,320 bytes [40.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
|
||||
Local Time is: Wed Sep 20 17:06:42 2023 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 1021) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 17) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
3 Spin_Up_Time 0x0027 220 220 063 Pre-fail Always - 11410
|
||||
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 84
|
||||
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
|
||||
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
|
||||
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
|
||||
8 Seek_Time_Performance 0x0027 250 236 187 Pre-fail Always - 58988
|
||||
9 Power_On_Minutes 0x0032 075 075 000 Old_age Always - 584h+36m
|
||||
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
|
||||
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
|
||||
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 100
|
||||
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 70
|
||||
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 742
|
||||
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 35
|
||||
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 1315
|
||||
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
|
||||
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
|
||||
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
|
||||
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
|
||||
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
|
||||
202 Data_Address_Mark_Errs 0x000a 253 248 000 Old_age Always - 0
|
||||
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2
|
||||
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
|
||||
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
|
||||
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
|
||||
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
|
||||
209 Offline_Seek_Performnce 0x0024 188 184 000 Old_age Offline - 0
|
||||
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
|
||||
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
|
||||
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
Warning: ATA error count 3204 inconsistent with error log pointer 5
|
||||
|
||||
ATA Error Count: 3204 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 3204 occurred at disk power-on lifetime: 24494 hours (1020 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 08 17 53 fd e2 Error: UNC 8 sectors at LBA = 0x02fd5317 = 50156311
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 17 53 fd e2 00 33d+11:23:42.704 READ DMA
|
||||
c8 00 08 0f 53 fd e2 00 33d+11:23:42.688 READ DMA
|
||||
c8 00 08 07 53 fd e2 00 33d+11:23:42.688 READ DMA
|
||||
c8 00 08 ff 52 fd e2 00 33d+11:23:42.688 READ DMA
|
||||
c8 00 08 f7 52 fd e2 00 33d+11:23:42.688 READ DMA
|
||||
|
||||
Error 3203 occurred at disk power-on lifetime: 24494 hours (1020 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 38 cf 52 fd e2 Error: UNC 56 sectors at LBA = 0x02fd52cf = 50156239
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 80 cf 52 fd e2 00 33d+11:23:40.448 READ DMA
|
||||
c8 00 80 4f 52 fd e2 00 33d+11:23:40.448 READ DMA
|
||||
c8 00 80 cf 51 fd e2 00 33d+11:23:40.448 READ DMA
|
||||
c8 00 80 4f 51 fd e2 00 33d+11:23:40.448 READ DMA
|
||||
c8 00 80 cf 50 fd e2 00 33d+11:23:40.448 READ DMA
|
||||
|
||||
Error 3202 occurred at disk power-on lifetime: 24494 hours (1020 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 08 17 53 fd e2 Error: UNC 8 sectors at LBA = 0x02fd5317 = 50156311
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 17 53 fd e2 00 33d+11:09:27.040 READ DMA
|
||||
ca 00 08 07 d3 22 e2 00 33d+11:09:27.024 WRITE DMA
|
||||
ca 00 08 e7 31 60 e0 00 33d+11:09:27.024 WRITE DMA
|
||||
ca 00 08 2f 00 5e e0 00 33d+11:09:27.024 WRITE DMA
|
||||
ca 00 80 27 c3 5c e3 00 33d+11:09:27.024 WRITE DMA
|
||||
|
||||
Error 3201 occurred at disk power-on lifetime: 24494 hours (1020 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 08 17 53 fd e2 Error: UNC 8 sectors at LBA = 0x02fd5317 = 50156311
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 17 53 fd e2 00 33d+11:09:24.832 READ DMA
|
||||
ca 00 08 07 d3 22 e2 00 33d+11:09:24.816 WRITE DMA
|
||||
ca 00 10 c7 1b 60 e0 00 33d+11:09:24.816 WRITE DMA
|
||||
ca 00 08 47 00 5e e0 00 33d+11:09:24.816 WRITE DMA
|
||||
c8 00 01 00 00 00 e0 00 33d+11:09:24.816 READ DMA
|
||||
|
||||
Error 3200 occurred at disk power-on lifetime: 24494 hours (1020 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 08 17 53 fd e2 Error: UNC 8 sectors at LBA = 0x02fd5317 = 50156311
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 17 53 fd e2 00 33d+11:09:22.576 READ DMA
|
||||
ca 00 08 07 d3 22 e2 00 33d+11:09:22.576 WRITE DMA
|
||||
ca 00 08 2f 1b 60 e0 00 33d+11:09:22.576 WRITE DMA
|
||||
ca 00 38 bf 33 5f e0 00 33d+11:09:22.576 WRITE DMA
|
||||
c8 00 08 1f 4c 34 e0 00 33d+11:09:22.560 READ DMA
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
227
HDD/Maxtor/6Y120/6Y120M0/D10C2171FA4B
Normal file
227
HDD/Maxtor/6Y120/6Y120M0/D10C2171FA4B
Normal file
@@ -0,0 +1,227 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Maxtor DiamondMax Plus 9
|
||||
Device Model: Maxtor 6Y120M0
|
||||
Serial Number: --
|
||||
Firmware Version: YAR511W0
|
||||
User Capacity: 122,941,242,880 bytes [122 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
|
||||
Local Time is: Tue Aug 15 15:22:15 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 254 (maximum performance), recommended: 192
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x80) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 242) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
No General Purpose Logging support.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 54) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
3 Spin_Up_Time POS--K 204 204 063 - 14568
|
||||
4 Start_Stop_Count -O--CK 252 252 000 - 2472
|
||||
5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0
|
||||
6 Read_Channel_Margin P----- 253 253 100 - 0
|
||||
7 Seek_Error_Rate -O-R-- 253 252 000 - 0
|
||||
8 Seek_Time_Performance POS--K 251 230 187 - 64275
|
||||
9 Power_On_Minutes -O--CK 222 222 000 - 1004h+48m
|
||||
10 Spin_Retry_Count PO-R-K 253 252 157 - 0
|
||||
11 Calibration_Retry_Count PO-R-K 253 252 223 - 0
|
||||
12 Power_Cycle_Count -O--CK 248 248 000 - 2245
|
||||
192 Power-Off_Retract_Count -O--CK 253 253 000 - 0
|
||||
193 Load_Cycle_Count -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O--CK 253 253 000 - 34
|
||||
195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 5279
|
||||
196 Reallocated_Event_Count ---R-- 253 253 000 - 0
|
||||
197 Current_Pending_Sector ---R-- 253 253 000 - 0
|
||||
198 Offline_Uncorrectable ---R-- 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count ---R-- 199 198 000 - 1
|
||||
200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 18
|
||||
202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0
|
||||
203 Run_Out_Cancel PO-R-- 253 252 180 - 3
|
||||
204 Soft_ECC_Correction -O-R-- 253 252 000 - 0
|
||||
205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0
|
||||
207 Spin_High_Current -O-R-K 253 252 000 - 0
|
||||
208 Spin_Buzz -O-R-K 253 252 000 - 0
|
||||
209 Offline_Seek_Performnce --S--K 189 189 000 - 0
|
||||
99 Unknown_Attribute --S--- 253 253 000 - 0
|
||||
100 Unknown_Attribute --S--- 253 253 000 - 0
|
||||
101 Unknown_Attribute --S--- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
Read SMART Log Directory failed: Input/output error
|
||||
|
||||
General Purpose Log Directory not supported
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
Warning: ATA error count 34 inconsistent with error log pointer 5
|
||||
|
||||
ATA Error Count: 34 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 34 occurred at disk power-on lifetime: 10143 hours (422 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
10 51 01 3f ef 4f ee Error: IDNF at LBA = 0x0e4fef3f = 240119615
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
ca 00 01 3f ef 4f ee 00 00:17:30.688 WRITE DMA
|
||||
c8 00 01 3f ef 4f ee 00 00:17:30.656 READ DMA
|
||||
c8 00 01 3f 00 00 e0 00 00:17:30.640 READ DMA
|
||||
ec 00 00 00 00 00 a0 00 00:17:30.640 IDENTIFY DEVICE
|
||||
c8 00 01 3f 00 00 e0 00 00:17:30.640 READ DMA
|
||||
|
||||
Error 33 occurred at disk power-on lifetime: 10143 hours (422 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
10 51 01 3f ef 4f ee Error: IDNF 1 sectors at LBA = 0x0e4fef3f = 240119615
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 01 3f ef 4f ee 00 00:17:30.656 READ DMA
|
||||
c8 00 01 3f 00 00 e0 00 00:17:30.640 READ DMA
|
||||
ec 00 00 00 00 00 a0 00 00:17:30.640 IDENTIFY DEVICE
|
||||
c8 00 01 3f 00 00 e0 00 00:17:30.640 READ DMA
|
||||
ec 00 00 00 00 00 a0 00 00:17:30.640 IDENTIFY DEVICE
|
||||
|
||||
Error 32 occurred at disk power-on lifetime: 8867 hours (369 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
84 51 00 c7 bf 8b ed Error: ICRC, ABRT at LBA = 0x0d8bbfc7 = 227262407
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 40 c7 bf 8b ed 00 12:06:01.824 READ DMA
|
||||
c8 00 08 87 1d 4a e7 00 12:06:01.808 READ DMA
|
||||
c8 00 08 0f 23 4a e7 00 12:06:01.808 READ DMA
|
||||
c8 00 08 8f 1c 4a e7 00 12:06:01.808 READ DMA
|
||||
c8 00 40 ef 5c 88 ed 00 12:06:01.792 READ DMA
|
||||
|
||||
Error 31 occurred at disk power-on lifetime: 8792 hours (366 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
84 51 00 7f c5 8b ed Error: ICRC, ABRT at LBA = 0x0d8bc57f = 227263871
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 d0 40 7f c5 8b ed 00 03:33:47.504 READ DMA
|
||||
c8 d0 40 77 5d 88 ed 00 03:33:47.504 READ DMA
|
||||
c8 d0 40 57 5c 88 ed 00 03:33:47.504 READ DMA
|
||||
c8 d0 08 3f 61 ca e0 00 03:33:47.488 READ DMA
|
||||
c8 d0 08 6f 2d 4a e7 00 03:33:47.488 READ DMA
|
||||
|
||||
Error 30 occurred at disk power-on lifetime: 8058 hours (335 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
84 51 00 1f c3 9a e8 Error: ICRC, ABRT at LBA = 0x089ac31f = 144360223
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 1f c3 9a e8 00 04:17:30.368 READ DMA
|
||||
c8 00 08 d7 e3 9c e8 00 04:17:30.352 READ DMA
|
||||
c8 00 08 ef c1 9a e8 00 04:17:30.352 READ DMA
|
||||
c8 00 08 bf b9 98 e8 00 04:17:30.352 READ DMA
|
||||
c8 00 08 19 37 39 ee 00 04:17:30.352 READ DMA
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
||||
161
HDD/Maxtor/7B300/7B300S0/BB65711A42CC
Normal file
161
HDD/Maxtor/7B300/7B300S0/BB65711A42CC
Normal file
@@ -0,0 +1,161 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: Maxtor 7B300S0
|
||||
Serial Number: --
|
||||
Firmware Version: BANC1WE0
|
||||
User Capacity: 300,090,728,448 bytes [300 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
|
||||
Local Time is: Sun May 14 11:30:28 2023 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 192 (intermediate), recommended: 192
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 118) The previous self-test completed having
|
||||
the read element of the test failed.
|
||||
Total time to complete Offline
|
||||
data collection: ( 2283) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 118) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
3 Spin_Up_Time POS--K 184 177 063 - 21732
|
||||
4 Start_Stop_Count -O--CK 253 253 000 - 476
|
||||
5 Reallocated_Sector_Ct PO--CK 252 252 063 - 11
|
||||
6 Read_Channel_Margin P----- 253 253 100 - 0
|
||||
7 Seek_Error_Rate -O-R-- 253 252 000 - 0
|
||||
8 Seek_Time_Performance POS--K 250 237 187 - 63342
|
||||
9 Power_On_Hours -O--CK 001 001 000 - 35839
|
||||
10 Spin_Retry_Count PO-R-K 253 252 157 - 0
|
||||
11 Calibration_Retry_Count PO-R-K 253 252 223 - 0
|
||||
12 Power_Cycle_Count -O--CK 252 252 000 - 480
|
||||
192 Power-Off_Retract_Count -O--CK 253 253 000 - 0
|
||||
193 Load_Cycle_Count -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O--CK 036 253 000 - 35
|
||||
195 Hardware_ECC_Recovered -O-R-- 252 205 000 - 62881
|
||||
196 Reallocated_Event_Count ---R-- 209 209 000 - 44
|
||||
197 Current_Pending_Sector ---R-- 252 252 000 - 11
|
||||
198 Offline_Uncorrectable ---R-- 181 181 000 - 72
|
||||
199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0
|
||||
200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 0
|
||||
202 Data_Address_Mark_Errs -O-R-- 253 177 000 - 0
|
||||
203 Run_Out_Cancel PO-R-- 253 221 180 - 0
|
||||
204 Soft_ECC_Correction -O-R-- 253 252 000 - 0
|
||||
205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0
|
||||
207 Spin_High_Current -O-R-K 253 252 000 - 0
|
||||
208 Spin_Buzz -O-R-K 253 252 000 - 0
|
||||
209 Offline_Seek_Performnce --S--K 234 234 000 - 232
|
||||
210 Unknown_Attribute -O--CK 253 252 000 - 0
|
||||
211 Unknown_Attribute -O--CK 253 252 000 - 0
|
||||
212 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
Read SMART Log Directory failed: Input/output error
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL R/O 1 Log Directory
|
||||
0x02 GPL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL R/O 4 Ext. Comprehensive SMART error log
|
||||
0x06 GPL R/O 1 SMART self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (4 sectors)
|
||||
Device Error Count: 1
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 59961 hours (2498 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
78 -- 00 00 50 00 00 07 c8 e7 32 40 00 at LBA = 0x07c8e732 = 130606898
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 20 00 50 00 00 0f 16 de cf 40 08 02:23:16.413 WRITE FPDMA QUEUED
|
||||
61 00 20 00 50 00 00 0f 16 de cf 40 08 02:23:16.413 WRITE FPDMA QUEUED
|
||||
60 00 c9 00 48 00 00 07 c8 e7 2f 40 08 02:23:15.860 READ FPDMA QUEUED
|
||||
60 00 e0 00 48 00 00 07 c8 e6 2f 40 08 02:23:15.860 READ FPDMA QUEUED
|
||||
60 00 e0 00 48 00 00 07 c8 e6 2f 40 08 02:23:15.859 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed: read failure 60% 63733 375658991
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
||||
143
HDD/Maxtor/STM3160/STM3160211AS/0B09C5C0D7C2
Normal file
143
HDD/Maxtor/STM3160/STM3160211AS/0B09C5C0D7C2
Normal file
@@ -0,0 +1,143 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Maxtor DiamondMax 20
|
||||
Device Model: MAXTOR STM3160211AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.AAE
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Mon Oct 30 16:46:12 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 23) The self-test routine was aborted by
|
||||
the host.
|
||||
Total time to complete Offline
|
||||
data collection: ( 430) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 54) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 114 098 006 - 74799054
|
||||
3 Spin_Up_Time PO---- 095 094 000 - 0
|
||||
4 Start_Stop_Count -O--CK 099 099 020 - 1650
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 076 060 030 - 46515555
|
||||
9 Power_On_Hours -O--CK 099 099 000 - 904
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 020 - 1722
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 072 051 045 - 28 (Min/Max 21/28)
|
||||
194 Temperature_Celsius -O---K 028 049 000 - 28 (0 19 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 080 046 000 - 192923129
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL,SL R/O 1 Streaming performance log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 1 Device vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL,SL VS 101 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
0xff GPL - 23040 Reserved
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Aborted by host 70% 849 -
|
||||
# 2 Short offline Aborted by host 70% 849 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
||||
210
HDD/Maxtor/STM3160/STM3160215AS/92A6E0B16752
Normal file
210
HDD/Maxtor/STM3160/STM3160215AS/92A6E0B16752
Normal file
@@ -0,0 +1,210 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Maxtor DiamondMax 21
|
||||
Device Model: MAXTOR STM3160215AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.AAD
|
||||
User Capacity: 160,041,885,696 bytes [160 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Wed Nov 22 02:43:37 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 430) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 54) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 118 087 006 - 173434882
|
||||
3 Spin_Up_Time PO---- 099 097 000 - 0
|
||||
4 Start_Stop_Count -O--CK 094 094 020 - 6366
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 087 060 030 - 503149913
|
||||
9 Power_On_Hours -O--CK 085 085 000 - 13934
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 095 095 020 - 5402
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 054 031 045 Past 46 (137 102 46 46 0)
|
||||
194 Temperature_Celsius -O---K 046 069 000 - 46 (0 24 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 084 067 000 - 62462980
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 1 Device vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL,SL VS 101 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
0xff GPL - 23040 Reserved
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 2
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 10172 hours (423 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 10 00 00 00 00 00 00 e0 00 Error: IDNF 16 sectors at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 20 00 10 00 12 9e 00 a1 a1 e0 00 00:42:04.608 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 f1 e0 00 00:42:04.607 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 e1 e0 00 00:42:04.607 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 d1 e0 00 00:42:04.607 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 c1 e0 00 00:42:04.607 READ DMA EXT
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 10172 hours (423 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 10 00 00 00 00 00 00 e0 00 Error: IDNF 16 sectors at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 20 00 10 00 12 9e 00 a1 a1 e0 00 00:37:13.269 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 f1 e0 00 00:37:13.269 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 e1 e0 00 00:37:13.268 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 d1 e0 00 00:37:13.268 READ DMA EXT
|
||||
25 00 20 00 10 00 12 9c 00 a1 c1 e0 00 00:37:13.268 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 13404 -
|
||||
# 2 Short offline Completed without error 00% 13399 -
|
||||
# 3 Short offline Interrupted (host reset) 70% 13398 -
|
||||
# 4 Short offline Completed without error 00% 13391 -
|
||||
# 5 Short offline Completed without error 00% 13385 -
|
||||
# 6 Short offline Completed without error 00% 13384 -
|
||||
# 7 Short offline Completed without error 00% 13381 -
|
||||
# 8 Short offline Completed without error 00% 13355 -
|
||||
# 9 Short offline Completed without error 00% 13346 -
|
||||
#10 Short offline Completed without error 00% 13344 -
|
||||
#11 Short offline Completed without error 00% 13343 -
|
||||
#12 Short offline Completed without error 00% 13340 -
|
||||
#13 Short offline Completed without error 00% 13338 -
|
||||
#14 Short offline Interrupted (host reset) 90% 13334 -
|
||||
#15 Short offline Completed without error 00% 13323 -
|
||||
#16 Short offline Completed without error 00% 13317 -
|
||||
#17 Short offline Completed without error 00% 13303 -
|
||||
#18 Short offline Completed without error 00% 13302 -
|
||||
#19 Short offline Interrupted (host reset) 90% 13301 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
145
HDD/Maxtor/STM3802/STM380211AS/7A9908229E84
Normal file
145
HDD/Maxtor/STM3802/STM380211AS/7A9908229E84
Normal file
@@ -0,0 +1,145 @@
|
||||
smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p22-HBSD amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Maxtor DiamondMax 20
|
||||
Device Model: MAXTOR STM380211AS
|
||||
Serial Number: --
|
||||
Firmware Version: 3.AAE
|
||||
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Sun May 5 20:02:36 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 430) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 27) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 085 073 006 - 12093830
|
||||
3 Spin_Up_Time PO---- 095 094 000 - 0
|
||||
4 Start_Stop_Count -O--CK 100 100 020 - 761
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1
|
||||
7 Seek_Error_Rate POSR-- 087 060 030 - 576996816
|
||||
9 Power_On_Hours -O--CK 070 070 000 - 26401
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 857
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 050 045 045 Past 50 (Min/Max 47/51)
|
||||
194 Temperature_Celsius -O---K 050 055 000 - 50 (0 11 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 046 041 000 - 97995876
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 1 Device vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL,SL VS 101 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
0xff GPL - 23040 Reserved
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 8010 -
|
||||
# 2 Conveyance offline Completed without error 00% 6730 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 13 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
||||
292
HDD/Maxtor/STM3802/STM380215AS/BBE3D33C9D56
Normal file
292
HDD/Maxtor/STM3802/STM380215AS/BBE3D33C9D56
Normal file
@@ -0,0 +1,292 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Maxtor DiamondMax 21
|
||||
Device Model: MAXTOR STM380215AS
|
||||
Serial Number: --
|
||||
Firmware Version: 4.AAB
|
||||
User Capacity: 80,025,280,000 bytes [80.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Tue Aug 22 17:25:06 2023 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 25) The self-test routine was aborted by
|
||||
the host.
|
||||
Total time to complete Offline
|
||||
data collection: ( 430) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 27) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0
|
||||
3 Spin_Up_Time PO---- 098 097 000 - 0
|
||||
4 Start_Stop_Count -O--CK 088 088 020 - 12619
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2
|
||||
7 Seek_Error_Rate POSR-- 087 060 030 - 643533396
|
||||
9 Power_On_Hours -O--CK 093 093 000 - 6835
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 087 087 020 - 13549
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 181
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 056 041 045 Past 44 (Min/Max 40/45 #8)
|
||||
194 Temperature_Celsius -O---K 044 059 000 - 44 (0 19 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 063 054 000 - 21936604
|
||||
197 Current_Pending_Sector -O--C- 084 001 000 - 328
|
||||
198 Offline_Uncorrectable ----C- 084 001 000 - 328
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 155 000 - 2536
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 1 Device vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL,SL VS 101 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
0xff GPL - 23040 Reserved
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 1482 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1482 [1] occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 01 01 00 01 b2 00 4e 6b e9 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
37 00 00 01 01 00 09 f0 00 50 6e e9 00 00:05:40.837 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 00 00 00 09 f0 00 50 6e e0 00 00:05:39.486 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
37 00 00 00 00 00 09 f0 00 50 6e e9 00 00:05:39.433 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 01 01 00 09 f0 00 50 6e e0 00 00:05:39.433 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
37 00 00 01 01 00 09 f0 00 50 6e e9 00 00:05:39.433 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 1481 [0] occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 01 01 00 01 b2 00 4e 6b e9 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
37 00 00 01 01 00 09 f0 00 50 6e e9 00 00:05:40.837 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 00 00 00 09 f0 00 50 6e e0 00 00:05:39.486 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
37 00 00 00 00 00 09 f0 00 50 6e e9 00 00:05:39.433 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 00 01 00 09 f8 00 50 af e0 00 00:05:39.433 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
29 00 00 00 01 00 09 f8 00 50 af e0 00 00:05:39.433 READ MULTIPLE EXT
|
||||
|
||||
Error 1480 [19] occurred at disk power-on lifetime: 6713 hours (279 days + 17 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 03 2b 00 c8 72 e3 00 Error: UNC at LBA = 0x32b00c872 = 13606373490
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 02 00 03 2b 00 c8 72 e3 00 00:02:22.740 READ DMA
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:22.737 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:02:29.647 IDENTIFY DEVICE
|
||||
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 00:02:29.591 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:29.589 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 1479 [18] occurred at disk power-on lifetime: 6713 hours (279 days + 17 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 03 2b 00 c8 72 e3 00 Error: UNC at LBA = 0x32b00c872 = 13606373490
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 02 00 03 2b 00 c8 72 e3 00 00:02:22.740 READ DMA
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:22.737 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:02:22.722 IDENTIFY DEVICE
|
||||
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 00:02:22.659 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:22.657 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 1478 [17] occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 01 01 00 01 b2 00 4e 6b e9 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
37 00 00 01 01 00 09 f0 00 50 6e e9 00 00:05:40.837 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 00 00 00 09 f0 00 50 6e e0 00 00:05:39.486 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
37 00 00 00 00 00 09 f0 00 50 6e e9 00 00:05:39.433 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 01 01 00 09 f0 00 50 6e e0 00 00:05:39.433 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
37 00 00 01 01 00 09 f0 00 50 6e e9 00 00:05:39.433 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 1477 [16] occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 01 01 00 01 b2 00 4e 6b e9 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
37 00 00 01 01 00 09 f0 00 50 6e e9 00 00:05:40.837 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 00 00 00 09 f0 00 50 6e e0 00 00:05:39.486 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
37 00 00 00 00 00 09 f0 00 50 6e e9 00 00:05:39.433 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
27 00 00 00 01 00 09 f8 00 50 af e0 00 00:05:39.433 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
29 00 00 00 01 00 09 f8 00 50 af e0 00 00:05:39.433 READ MULTIPLE EXT
|
||||
|
||||
Error 1476 [15] occurred at disk power-on lifetime: 6713 hours (279 days + 17 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 03 2b 00 c8 72 e3 00 Error: UNC at LBA = 0x32b00c872 = 13606373490
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 02 00 03 2b 00 c8 72 e3 00 00:02:22.740 READ DMA
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:22.737 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:02:29.647 IDENTIFY DEVICE
|
||||
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 00:02:29.591 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:29.589 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 1475 [14] occurred at disk power-on lifetime: 6713 hours (279 days + 17 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 03 2b 00 c8 72 e3 00 Error: UNC at LBA = 0x32b00c872 = 13606373490
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
c8 00 00 00 02 00 03 2b 00 c8 72 e3 00 00:02:22.740 READ DMA
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:22.737 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:02:22.722 IDENTIFY DEVICE
|
||||
ef 00 03 00 42 00 ff ff 00 ff ff a0 00 00:02:22.659 SET FEATURES [Set transfer mode]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:22.657 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Aborted by host 90% 6071 -
|
||||
# 2 Short offline Completed without error 00% 5997 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
Reference in New Issue
Block a user