mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
346
HDD/Samsung/HD103/HD103SI/35C6DBCE8D11
Normal file
346
HDD/Samsung/HD103/HD103SI/35C6DBCE8D11
Normal file
@@ -0,0 +1,346 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F2 EG
|
||||
Device Model: SAMSUNG HD103SI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 1AG01118
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Thu Aug 29 19:21:55 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 38) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: (13053) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 218) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 23) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 095 051 - 94
|
||||
3 Spin_Up_Time POS--- 082 082 011 - 6270
|
||||
4 Start_Stop_Count -O--CK 096 096 000 - 4156
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 11148
|
||||
9 Power_On_Hours -O--CK 092 092 000 - 38160
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 3
|
||||
12 Power_Cycle_Count -O--CK 096 096 000 - 4156
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 095 000 - 94
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 145
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 444
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 072 056 000 - 28 (Min/Max 19/28)
|
||||
194 Temperature_Celsius -O---K 066 054 000 - 34 (Min/Max 19/34)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 82195
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 097 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 436
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL R/O 2 Streaming performance log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 662 (device log contains only the most recent 8 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 662 [5] occurred at disk power-on lifetime: 38159 hours (1589 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 2f 00 00 00 00 0a d1 40 00 at LBA = 0x00000ad1 = 2769
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 20 20 00 e0 00 00 00 70 66 20 40 00 00:03:07.940 READ FPDMA QUEUED
|
||||
60 20 20 00 e0 00 00 00 70 64 20 40 00 00:03:07.940 READ FPDMA QUEUED
|
||||
60 20 20 00 e0 00 00 00 00 0a 20 40 00 00:03:07.940 READ FPDMA QUEUED
|
||||
60 20 20 00 e0 00 00 00 00 08 20 40 00 00:03:07.940 READ FPDMA QUEUED
|
||||
60 20 20 00 01 00 00 00 00 08 00 40 00 00:03:05.710 READ FPDMA QUEUED
|
||||
|
||||
Error 661 [4] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 57 00 00 00 00 09 a9 40 00 at LBA = 0x000009a9 = 2473
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 f8 00 00 00 00 09 08 40 00 00:00:25.020 READ FPDMA QUEUED
|
||||
60 00 00 00 78 00 00 00 00 08 88 40 00 00:00:25.020 READ FPDMA QUEUED
|
||||
60 00 00 00 30 00 00 00 00 08 48 40 00 00:00:25.020 READ FPDMA QUEUED
|
||||
60 00 00 00 10 00 00 00 00 08 28 40 00 00:00:25.020 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 00 08 10 40 00 00:00:25.020 READ FPDMA QUEUED
|
||||
|
||||
Error 660 [3] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 5f 00 00 74 70 65 a1 40 00 at LBA = 0x747065a1 = 1953523105
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 02 00 00 00 00 70 64 00 40 00 00:07:41.600 READ FPDMA QUEUED
|
||||
60 00 00 01 f8 00 00 00 00 0a 08 40 00 00:07:41.600 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 00 09 f8 40 00 00:07:41.590 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 00 09 f0 40 00 00:07:41.590 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 00 09 e8 40 00 00:07:41.590 READ FPDMA QUEUED
|
||||
|
||||
Error 659 [2] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 17 00 00 00 00 08 e9 40 00 at LBA = 0x000008e9 = 2281
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 f8 00 00 00 00 09 08 40 00 00:07:40.880 READ FPDMA QUEUED
|
||||
60 00 00 00 78 00 00 00 00 08 88 40 00 00:07:40.880 READ FPDMA QUEUED
|
||||
60 00 00 00 30 00 00 00 00 08 48 40 00 00:07:40.880 READ FPDMA QUEUED
|
||||
60 00 00 00 10 00 00 00 00 08 28 40 00 00:07:40.880 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 00 08 10 40 00 00:07:40.880 READ FPDMA QUEUED
|
||||
|
||||
Error 658 [1] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 00 00 08 0e 40 00 at LBA = 0x0000080e = 2062
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 08 00 00 00 00 08 08 40 00 00:07:40.160 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 00 08 00 40 00 00:07:40.130 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 67 f0 40 00 00:07:40.130 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 67 80 40 00 00:07:40.130 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 6b f8 40 00 00:07:40.130 READ FPDMA QUEUED
|
||||
|
||||
Error 657 [0] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 74 70 6a b6 40 00 at LBA = 0x74706ab6 = 1953524406
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 20 00 08 00 00 00 70 6a b0 40 00 00:07:39.480 READ FPDMA QUEUED
|
||||
60 20 20 00 08 00 00 00 70 6a a8 40 00 00:07:39.480 READ FPDMA QUEUED
|
||||
60 00 20 00 08 00 00 00 70 6a a0 40 00 00:07:39.480 READ FPDMA QUEUED
|
||||
60 00 03 00 08 00 00 00 70 6a 98 40 00 00:07:39.480 READ FPDMA QUEUED
|
||||
60 00 03 00 08 00 00 00 70 6a 90 40 00 00:07:39.480 READ FPDMA QUEUED
|
||||
|
||||
Error 656 [7] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 74 70 6a 86 40 00 at LBA = 0x74706a86 = 1953524358
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 03 00 08 00 00 00 70 6a 80 40 00 00:07:38.840 READ FPDMA QUEUED
|
||||
60 00 da 00 08 00 00 00 70 6a 78 40 00 00:07:38.840 READ FPDMA QUEUED
|
||||
60 00 10 00 08 00 00 00 70 6a 70 40 00 00:07:38.820 READ FPDMA QUEUED
|
||||
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:07:38.820 SET FEATURES [Enable SATA feature]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:07:38.820 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
|
||||
Error 655 [6] occurred at disk power-on lifetime: 38107 hours (1587 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 74 70 6a 76 40 00 at LBA = 0x74706a76 = 1953524342
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 08 00 00 00 70 6a 70 40 00 00:07:38.210 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 6a 68 40 00 00:07:38.210 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 6a 60 40 00 00:07:38.210 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 6a 58 40 00 00:07:38.210 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 70 6a 50 40 00 00:07:38.210 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Interrupted (host reset) 60% 38156 -
|
||||
# 2 Short offline Completed without error 00% 38155 -
|
||||
# 3 Short offline Completed without error 00% 38149 -
|
||||
# 4 Short offline Completed without error 00% 38127 -
|
||||
# 5 Short offline Completed without error 00% 38119 -
|
||||
# 6 Short offline Completed without error 00% 38119 -
|
||||
# 7 Short offline Interrupted (host reset) 10% 38119 -
|
||||
# 8 Extended offline Completed: read failure 80% 38118 281020847
|
||||
# 9 Extended offline Interrupted (host reset) 80% 38116 -
|
||||
#10 Extended offline Aborted by host 80% 38114 -
|
||||
#11 Short offline Completed without error 00% 38112 -
|
||||
#12 Extended offline Aborted by host 90% 38112 -
|
||||
#13 Short offline Completed without error 00% 38111 -
|
||||
#14 Extended offline Aborted by host 90% 38110 -
|
||||
#15 Extended offline Completed: read failure 80% 38108 280967369
|
||||
#16 Short offline Completed without error 00% 38107 -
|
||||
#17 Short offline Completed without error 00% 38105 -
|
||||
#18 Short offline Completed without error 00% 38104 -
|
||||
#19 Extended offline Completed: read failure 80% 38102 280967369
|
||||
#20 Extended offline Aborted by host 80% 38102 -
|
||||
#21 Short offline Completed without error 00% 38100 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 34 Celsius
|
||||
Power Cycle Min/Max Temperature: --/34 Celsius
|
||||
Lifetime Min/Max Temperature: --/46 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (46)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 35 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 3 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 35 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
321
HDD/Samsung/HD103/HD103SI/A0EA939972B8
Normal file
321
HDD/Samsung/HD103/HD103SI/A0EA939972B8
Normal file
@@ -0,0 +1,321 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F2 EG
|
||||
Device Model: SAMSUNG HD103SI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 1AG01118
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Mon Sep 30 20:11:15 2024 EEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: (12626) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 211) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 22) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 084 051 - 0
|
||||
3 Spin_Up_Time POS--- 082 082 011 - 6230
|
||||
4 Start_Stop_Count -O--CK 095 095 000 - 4970
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 11463
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 23391
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 1
|
||||
12 Power_Cycle_Count -O--CK 097 097 000 - 3323
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 084 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 386
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 076 001 000 - 24 (Min/Max 24/24)
|
||||
194 Temperature_Celsius -O---K 075 049 000 - 25 (Min/Max 24/25)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 15360
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL R/O 2 Streaming performance log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 194 (device log contains only the most recent 8 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 194 [1] occurred at disk power-on lifetime: 9772 hours (407 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 0f 00 00 2d be 4e 31 40 00 at LBA = 0x2dbe4e31 = 767446577
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 20 00 00 00 be 4e 20 40 00 04:39:01.200 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 be 4e 00 40 00 04:39:01.200 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 be 4d 60 40 00 04:39:01.200 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 be 4d 40 40 00 04:39:01.200 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 db 42 a0 40 00 04:39:00.200 READ FPDMA QUEUED
|
||||
|
||||
Error 193 [0] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:55.890 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:55.890 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:55.890 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:55.870 NOP [Abort queued commands]
|
||||
|
||||
Error 192 [7] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:53.400 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:53.400 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:53.400 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:53.380 NOP [Abort queued commands]
|
||||
|
||||
Error 191 [6] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:50.830 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:50.830 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:50.830 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:50.810 NOP [Abort queued commands]
|
||||
|
||||
Error 190 [5] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:48.330 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:48.330 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:48.330 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:48.260 NOP [Abort queued commands]
|
||||
|
||||
Error 189 [4] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:45.800 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:45.800 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:45.800 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:45.790 NOP [Abort queued commands]
|
||||
|
||||
Error 188 [3] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:43.280 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:43.280 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:43.280 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:43.260 NOP [Abort queued commands]
|
||||
|
||||
Error 187 [2] occurred at disk power-on lifetime: 2961 hours (123 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 42 00 00 00 00 15 81 a6 67 40 00 at LBA = 0x1581a667 = 360818279
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 90 01 00 00 00 00 81 a6 00 40 00 01:54:40.750 READ FPDMA QUEUED
|
||||
ef 00 90 00 03 00 00 00 00 00 00 00 00 01:54:40.750 SET FEATURES [Disable SATA feature]
|
||||
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:54:40.750 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:54:40.730 NOP [Abort queued commands]
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 15415 -
|
||||
# 2 Short offline Completed without error 00% 15409 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 25 Celsius
|
||||
Power Cycle Min/Max Temperature: --/25 Celsius
|
||||
Lifetime Min/Max Temperature: --/50 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (10)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
327
HDD/Samsung/HD103/HD103SI/F86CD84E6898
Normal file
327
HDD/Samsung/HD103/HD103SI/F86CD84E6898
Normal file
@@ -0,0 +1,327 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F2 EG
|
||||
Device Model: SAMSUNG HD103SI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 1AG01118
|
||||
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Mon Sep 30 20:11:16 2024 EEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 25) The self-test routine was aborted by
|
||||
the host.
|
||||
Total time to complete Offline
|
||||
data collection: (12936) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7f) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 216) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 23) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
||||
3 Spin_Up_Time POS--- 082 082 011 - 6270
|
||||
4 Start_Stop_Count -O--CK 096 096 000 - 3952
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 3
|
||||
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 10519
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 20342
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 1
|
||||
12 Power_Cycle_Count -O--CK 097 097 000 - 2585
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 36
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 078 001 000 - 22 (Min/Max 22/22)
|
||||
194 Temperature_Celsius -O---K 078 061 000 - 22 (Min/Max 22/22)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 3776
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 3
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 11
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 10
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL R/O 2 Streaming performance log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 11 (device log contains only the most recent 8 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 11 [2] occurred at disk power-on lifetime: 8711 hours (362 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 3d f5 03 fe 40 00 at LBA = 0x3df503fe = 1039467518
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 20 00 00 00 f5 03 e0 40 00 1d+23:52:39.070 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 f5 03 c0 40 00 1d+23:52:39.070 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 f5 03 a0 40 00 1d+23:52:39.070 READ FPDMA QUEUED
|
||||
60 00 00 00 a0 00 00 00 f5 03 00 40 00 1d+23:52:39.070 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 f5 02 e0 40 00 1d+23:52:39.060 READ FPDMA QUEUED
|
||||
|
||||
Error 10 [1] occurred at disk power-on lifetime: 8674 hours (361 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 74 30 a7 fe 40 00 at LBA = 0x7430a7fe = 1949345790
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 60 00 00 00 da 6a 68 40 00 10:59:16.810 READ FPDMA QUEUED
|
||||
60 00 00 00 60 00 00 00 36 ed a0 40 00 10:59:16.810 READ FPDMA QUEUED
|
||||
60 00 00 01 e0 00 00 00 30 a6 20 40 00 10:59:16.810 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 da 66 b8 40 00 10:59:16.810 READ FPDMA QUEUED
|
||||
60 00 00 00 28 00 00 00 da 6a d0 40 00 10:59:16.810 READ FPDMA QUEUED
|
||||
|
||||
Error 9 [0] occurred at disk power-on lifetime: 8674 hours (361 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 af 00 00 74 30 a7 51 40 00 at LBA = 0x7430a751 = 1949345617
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 10 00 00 00 96 6d e0 40 00 10:59:15.110 WRITE FPDMA QUEUED
|
||||
60 00 00 00 60 00 00 00 36 ed a0 40 00 10:59:15.110 READ FPDMA QUEUED
|
||||
60 00 00 01 e0 00 00 00 30 a6 20 40 00 10:59:15.110 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 30 a6 00 40 00 10:59:15.110 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 08 10:59:15.070 FLUSH CACHE EXT
|
||||
|
||||
Error 8 [7] occurred at disk power-on lifetime: 8644 hours (360 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 0f 00 00 71 69 f7 b1 40 00 at LBA = 0x7169f7b1 = 1902770097
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 20 00 00 00 69 f7 e0 40 00 02:57:34.620 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 69 f7 c0 40 00 02:57:34.620 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 69 f7 a0 40 00 02:57:34.620 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 69 f7 80 40 00 02:57:34.620 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 69 f7 60 40 00 02:57:34.620 READ FPDMA QUEUED
|
||||
|
||||
Error 7 [6] occurred at disk power-on lifetime: 8641 hours (360 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 01 00 00 00 00 00 01 a0 ff 01:00:33.360 NOP [Abort queued commands]
|
||||
60 00 00 02 00 00 00 00 ea 3e 00 40 00 01:00:33.310 READ FPDMA QUEUED
|
||||
61 00 00 00 02 00 00 00 d0 08 08 40 00 01:00:33.310 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 08 01:00:33.310 FLUSH CACHE EXT
|
||||
60 00 00 00 20 00 00 00 ea 3d e0 40 00 01:00:33.300 READ FPDMA QUEUED
|
||||
|
||||
Error 6 [5] occurred at disk power-on lifetime: 8640 hours (360 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 0f 00 00 6b a5 29 51 40 00 at LBA = 0x6ba52951 = 1805986129
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 20 00 00 00 a5 29 40 40 00 12:53:06.740 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 a5 29 20 40 00 12:53:06.740 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 a5 29 00 40 00 12:53:06.740 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 a5 28 e0 40 00 12:53:06.740 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 a5 28 c0 40 00 12:53:06.740 READ FPDMA QUEUED
|
||||
|
||||
Error 5 [4] occurred at disk power-on lifetime: 8634 hours (359 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 48 00 1b 00 00 71 78 99 e4 40 00 at LBA = 0x717899e4 = 1903729124
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 20 00 00 00 78 99 e0 40 00 06:55:49.400 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 78 99 c0 40 00 06:55:49.400 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 78 99 a0 40 00 06:55:49.400 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 78 99 80 40 00 06:55:49.400 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 78 99 60 40 00 06:55:49.400 READ FPDMA QUEUED
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 8633 hours (359 days + 17 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 4a 00 00 00 00 6c ea 2d 7e 40 00 at LBA = 0x6cea2d7e = 1827286398
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 20 00 00 00 ea 2e 20 40 00 05:43:18.790 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 ea 2e 00 40 00 05:43:18.790 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 ea 2d e0 40 00 05:43:18.790 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 ea 2d c0 40 00 05:43:18.770 READ FPDMA QUEUED
|
||||
60 00 00 00 20 00 00 00 ea 2d a0 40 00 05:43:18.770 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Aborted by host 90% 12340 -
|
||||
# 2 Short offline Completed without error 00% 7242 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 22 Celsius
|
||||
Power Cycle Min/Max Temperature: --/22 Celsius
|
||||
Lifetime Min/Max Temperature: --/45 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (10)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user