1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30

Update of reports (new: 6895, modified: 16)

This commit is contained in:
Andrey Ponomarenko
2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions

View File

@@ -0,0 +1,332 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD161GJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Thu Oct 5 10:30:21 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1988) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 34) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 099 058 051 - 831
3 Spin_Up_Time POS--- 092 092 011 - 3470
4 Start_Stop_Count -O--CK 098 098 000 - 2410
5 Reallocated_Sector_Ct PO--CK 099 099 010 - 9
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 10157
9 Power_On_Hours -O--CK 096 096 000 - 19405
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2306
13 Read_Soft_Error_Rate -OSR-- 099 066 000 - 664
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 2658
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 068 060 000 - 32 (Min/Max 17/32)
194 Temperature_Celsius -O---K 068 058 000 - 32 (Min/Max 17/33)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 4090
196 Reallocated_Event_Count -O--CK 100 100 000 - 9
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 4
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 1647 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1647 [6] occurred at disk power-on lifetime: 18574 hours (773 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 0a 00 00 02 29 fe 11 e0 00 Error: ICRC, ABRT 10 sectors at LBA = 0x0229fe11 = 36306449
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 1b 00 00 02 29 fe 00 e0 00 00:00:47.980 READ DMA EXT
25 20 20 00 24 00 00 02 29 fd dc e0 00 00:00:47.970 READ DMA EXT
25 20 20 00 1c 00 00 02 29 fd c0 e0 00 00:00:47.970 READ DMA EXT
25 20 20 00 23 00 00 02 29 fd 9d e0 00 00:00:47.970 READ DMA EXT
25 20 20 00 1d 00 00 02 29 fd 80 e0 00 00:00:47.970 READ DMA EXT
Error 1646 [5] occurred at disk power-on lifetime: 18574 hours (773 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 18 00 00 00 bd 15 a8 e0 00 24 sectors at LBA = 0x00bd15a8 = 12391848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 18 00 00 00 bd 15 a8 e0 00 00:00:07.420 READ DMA EXT
25 20 20 00 28 00 00 00 bd 15 80 e0 00 00:00:07.420 READ DMA EXT
25 20 20 00 39 00 00 00 cc 11 07 e0 00 00:00:07.410 READ DMA EXT
25 20 20 00 07 00 00 00 cc 11 00 e0 00 00:00:07.410 READ DMA EXT
25 20 20 00 21 00 00 00 bd 17 df e0 00 00:00:07.410 READ DMA EXT
Error 1645 [4] occurred at disk power-on lifetime: 18574 hours (773 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- d0 00 3f 00 00 00 00 00 00 e0 00 63 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 20 20 00 3f 00 00 00 00 00 00 e0 00 00:00:07.250 READ DMA EXT
25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:07.240 READ DMA EXT
c6 00 20 00 10 00 00 00 00 00 01 ef 00 00:00:07.170 SET MULTIPLE MODE
91 00 20 00 3f 00 00 00 00 00 01 ef 00 00:00:07.170 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 20 00 01 00 00 00 00 00 01 e0 00 00:00:07.170 RECALIBRATE [OBS-4]
Error 1644 [3] occurred at disk power-on lifetime: 15670 hours (652 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 48 03 9f 00 00 12 80 dd 29 40 00 at LBA = 0x1280dd29 = 310435113
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 20 20 00 90 00 00 00 80 d5 20 40 00 07:49:30.460 WRITE FPDMA QUEUED
61 00 00 05 40 00 00 00 80 eb 48 40 00 07:49:30.460 WRITE FPDMA QUEUED
61 20 20 05 40 00 00 00 80 e6 08 40 00 07:49:30.450 WRITE FPDMA QUEUED
61 00 00 05 40 00 00 00 80 e0 c8 40 00 07:49:30.450 WRITE FPDMA QUEUED
61 00 00 05 40 00 00 00 80 db 88 40 00 07:49:30.450 WRITE FPDMA QUEUED
Error 1643 [2] occurred at disk power-on lifetime: 12037 hours (501 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 42 00 00 00 00 04 ad 11 0b 40 00 at LBA = 0x04ad110b = 78450955
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 ad 11 08 40 00 04:42:40.950 READ FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 08 04:42:40.950 SET FEATURES [Enable SATA feature]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:40.950 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:40.950 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:40.940 IDENTIFY DEVICE
Error 1642 [1] occurred at disk power-on lifetime: 12037 hours (501 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 42 00 00 00 00 04 ad 11 0b 40 00 at LBA = 0x04ad110b = 78450955
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 ad 11 08 40 00 04:42:38.740 READ FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 08 04:42:38.730 SET FEATURES [Enable SATA feature]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:38.730 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:38.730 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:38.730 IDENTIFY DEVICE
Error 1641 [0] occurred at disk power-on lifetime: 12037 hours (501 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 42 00 00 00 00 04 ad 11 0b 40 00 at LBA = 0x04ad110b = 78450955
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 00 ad 11 08 40 00 04:42:36.540 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 ad 14 d8 40 00 04:42:36.530 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 ad 14 d0 40 00 04:42:36.530 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 ad 14 c8 40 00 04:42:36.530 READ FPDMA QUEUED
60 00 00 00 08 00 00 00 ad 14 c0 40 00 04:42:36.530 READ FPDMA QUEUED
Error 1640 [7] occurred at disk power-on lifetime: 12037 hours (501 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 42 00 00 00 00 04 ad 11 0b 40 00 at LBA = 0x04ad110b = 78450955
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 03 00 08 00 00 00 ad 11 08 40 00 04:42:34.290 READ FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 08 04:42:32.600 SET FEATURES [Enable SATA feature]
ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:32.600 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:32.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:32.590 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 17675 -
# 2 Extended offline Completed without error 00% 17611 -
# 3 Extended offline Completed without error 00% 15614 -
# 4 Extended offline Interrupted (host reset) 60% 15477 -
# 5 Extended offline Completed without error 00% 15321 -
# 6 Extended offline Completed without error 00% 15074 -
# 7 Extended offline Completed without error 00% 15023 -
# 8 Extended offline Completed without error 00% 13371 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: --/33 Celsius
Lifetime Min/Max Temperature: --/42 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (106)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,301 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD161GJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AC01118
User Capacity: 160,040,803,840 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Mon Oct 30 16:46:12 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2115) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 099 099 051 - 16774
3 Spin_Up_Time POS--- 086 086 011 - 5240
4 Start_Stop_Count -O--CK 098 098 000 - 1776
5 Reallocated_Sector_Ct PO--CK 097 097 010 - 19
7 Seek_Error_Rate POSR-- 253 253 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 1820
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 1758
13 Read_Soft_Error_Rate -OSR-- 099 099 000 - 16774
183 Runtime_Bad_Block -O--CK 100 100 000 - 10
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 17072
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 084 065 000 - 16 (Min/Max 16/16)
194 Temperature_Celsius -O---K 079 060 000 - 21 (Min/Max 16/21)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 40606
196 Reallocated_Event_Count -O--CK 100 100 000 - 19
197 Current_Pending_Sector -O--C- 098 096 000 - 70
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 4
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x04 GPL R/O 2 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 2 Streaming performance log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 8507 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8507 [2] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 50 00 00 00 04 04 79 40 00 00:58:12.560 READ DMA EXT
Error 8506 [1] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 50 00 00 00 04 04 79 40 00 00:58:10.640 READ DMA EXT
Error 8505 [0] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 50 00 00 00 04 04 79 40 00 00:58:08.690 READ DMA EXT
Error 8504 [7] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 50 00 00 00 04 04 79 40 00 00:58:06.750 READ DMA EXT
35 00 00 00 01 00 00 00 04 8c 40 40 00 00:58:06.750 WRITE DMA EXT
35 00 00 00 01 00 00 00 04 8a ac 40 00 00:58:06.750 WRITE DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:58:06.750 READ LOG EXT
Error 8503 [6] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 42 00 00 00 00 00 04 04 a8 40 00 at LBA = 0x000404a8 = 263336
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 50 00 00 00 04 04 79 40 00 00:58:04.780 READ FPDMA QUEUED
60 00 00 00 40 00 00 00 04 04 39 40 00 00:58:04.780 READ FPDMA QUEUED
61 00 00 00 01 00 00 00 04 8c 40 40 00 00:58:04.780 WRITE FPDMA QUEUED
61 00 d2 00 01 00 00 00 04 8a ac 40 00 00:58:04.780 WRITE FPDMA QUEUED
61 00 00 00 01 00 00 00 04 8a 19 40 00 00:58:04.780 WRITE FPDMA QUEUED
Error 8502 [5] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 00 04 03 79 40 00 00:58:02.810 READ DMA EXT
Error 8501 [4] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 00 04 03 79 40 00 00:58:00.870 READ DMA EXT
Error 8500 [3] occurred at disk power-on lifetime: 1818 hours (75 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 04 04 a9 40 00 Error: UNC at LBA = 0x000404a9 = 263337
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 00 04 03 79 40 00 00:57:58.930 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 21 Celsius
Power Cycle Min/Max Temperature: --/21 Celsius
Lifetime Min/Max Temperature: --/40 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (80)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
Read Device Statistics page 0x00 failed
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,318 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD161HJ
Serial Number: --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: GF100-07
User Capacity: 160,040,803,840 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 3b
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Sat Nov 25 21:30:54 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2640) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 44) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 18
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 073 073 011 - 4000
4 Start_Stop_Count -O--CK 088 088 000 - 11238
5 Reallocated_Sector_Ct PO--CK 099 099 010 - 1
7 Seek_Error_Rate POSR-- 252 252 051 - 0
8 Seek_Time_Performance P-S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 096 096 000 - 2050585
10 Spin_Retry_Count PO--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--C- 252 252 000 - 0
12 Power_Cycle_Count -O--CK 094 094 000 - 5975
184 End-to-End_Error -O--CK 252 252 000 - 0
187 Reported_Uncorrect -O--CK 092 092 000 - 8
188 Command_Timeout -O--CK 252 252 000 - 0
190 Airflow_Temperature_Cel -O---K 145 049 000 - 36
194 Temperature_Celsius -O---K 145 049 000 - 36
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 099 099 000 - 1
197 Current_Pending_Sector -O--C- 252 099 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 252 252 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 2318 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2318 [5] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:04:00.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:04:00.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:04:00.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:04:00.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:04:00.000 SET MULTIPLE MODE
Error 2317 [4] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:03:18.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:03:18.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:03:18.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:03:18.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:03:18.000 SET MULTIPLE MODE
Error 2316 [3] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 04 00:05:47.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 ff 00:05:47.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:05:47.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:05:47.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:05:47.000 SET MULTIPLE MODE
Error 2315 [2] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:05:35.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:05:35.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:05:35.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:05:35.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:05:35.000 SET MULTIPLE MODE
Error 2314 [1] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:04:00.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:04:00.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:04:00.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:04:00.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:04:00.000 SET MULTIPLE MODE
Error 2313 [0] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:03:18.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:03:18.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:03:18.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:03:18.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:03:18.000 SET MULTIPLE MODE
Error 2312 [7] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 04 00:05:47.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 ff 00:05:47.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:05:47.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:05:47.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:05:47.000 SET MULTIPLE MODE
Error 2311 [6] occurred at disk power-on lifetime: 17087 hours (711 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:05:35.000 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:05:35.000 SECURITY FREEZE LOCK
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:05:35.000 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 00 ff 00:05:35.000 SET FEATURES [Set transfer mode]
c6 00 00 00 10 00 00 00 00 00 00 00 ff 00:05:35.000 SET MULTIPLE MODE
SMART Extended Self-test Log Version: 0 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: --/36 Celsius
Lifetime Min/Max Temperature: --/36 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 10/105 Celsius
Min/Max Temperature Limit: 5/110 Celsius
Temperature History Size (Index): 128 (45)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,170 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD161HJ
Serial Number: --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: JF100-22
User Capacity: 160,000,000,000 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Mon Oct 21 17:25:02 2024 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 254
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2929) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 49) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0
3 Spin_Up_Time POS--- 253 253 025 - 4480
4 Start_Stop_Count -O--CK 097 097 000 - 3849
5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0
7 Seek_Error_Rate -OSR-- 253 253 000 - 0
8 Seek_Time_Performance --S--K 253 253 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 5073
10 Spin_Retry_Count -O--CK 253 253 000 - 0
11 Calibration_Retry_Count -O--C- 253 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2104
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 205823
184 End-to-End_Error PO--CK 253 253 099 - 0
187 Reported_Uncorrect -O--CK 253 253 000 - 0
188 Command_Timeout -O--CK 253 253 000 - 0
190 Airflow_Temperature_Cel -O---K 130 124 000 - 36 (Min/Max 11/38)
194 Temperature_Celsius -O---K 127 121 000 - 37 (Min/Max 11/39)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 205823
196 Reallocated_Event_Count -O--CK 253 253 000 - 0
197 Current_Pending_Sector -O--C- 253 253 000 - 0
198 Offline_Uncorrectable ----CK 253 253 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0
202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 33/37 Celsius
Lifetime Min/Max Temperature: 11/39 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -4/72 Celsius
Min/Max Temperature Limit: -9/77 Celsius
Temperature History Size (Index): 128 (59)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8001 2 0 Vendor specific