mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
318
HDD/Samsung/HD322/HD322HJ/01FFC08DDC60
Normal file
318
HDD/Samsung/HD322/HD322HJ/01FFC08DDC60
Normal file
@@ -0,0 +1,318 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F1 DT
|
||||
Device Model: SAMSUNG HD322HJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0000f0 ...
|
||||
Firmware Version: 1AC01113
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Fri Feb 2 12:16:50 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 3888) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 66) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 8) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 088 051 - 0
|
||||
3 Spin_Up_Time POS--- 094 094 011 - 2760
|
||||
4 Start_Stop_Count -O--CK 095 095 000 - 5098
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 0
|
||||
9 Power_On_Hours -O--CK 093 093 000 - 34656
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 62
|
||||
12 Power_Cycle_Count -O--CK 095 095 000 - 4955
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 088 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 591
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 071 061 000 - 29 (Min/Max 29/29)
|
||||
194 Temperature_Celsius -O---K 071 059 000 - 29 (Min/Max 29/30)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 417689
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL R/O 2 Write stream error log
|
||||
0x22 GPL R/O 2 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 503 (device log contains only the most recent 8 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 503 [6] occurred at disk power-on lifetime: 22899 hours (954 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 05 2d 15 e0 00 Error: UNC at LBA = 0x00052d15 = 339221
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 72 00 00 00 05 2c d0 e0 00 00:03:46.670 READ DMA EXT
|
||||
25 00 00 00 80 00 00 13 2e cc 98 e0 00 00:03:46.660 READ DMA EXT
|
||||
25 00 00 00 10 00 00 0d 58 c0 58 e0 00 00:03:46.640 READ DMA EXT
|
||||
35 00 00 01 00 00 00 05 5c 7c 60 e0 00 00:03:46.640 WRITE DMA EXT
|
||||
35 00 00 01 00 00 00 05 5c 7b 60 e0 00 00:03:46.640 WRITE DMA EXT
|
||||
|
||||
Error 502 [5] occurred at disk power-on lifetime: 22899 hours (954 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 05 2d 15 e0 00 Error: UNC at LBA = 0x00052d15 = 339221
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 72 00 00 00 05 2c d0 e0 00 00:03:44.080 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 63 84 d8 e0 00 00:03:44.080 WRITE DMA EXT
|
||||
25 00 00 00 08 00 00 00 05 2c c8 e0 00 00:03:44.070 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 63 84 d8 e0 00 00:03:44.070 WRITE DMA EXT
|
||||
35 00 00 00 38 00 00 00 f3 83 28 e0 00 00:03:44.070 WRITE DMA EXT
|
||||
|
||||
Error 501 [4] occurred at disk power-on lifetime: 18428 hours (767 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- d0 00 80 00 00 00 63 25 f0 e0 00 128 sectors at LBA = 0x006325f0 = 6497776
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 00 00 f2 a0 e0 00 00:00:35.200 READ DMA EXT
|
||||
25 00 00 00 80 00 00 00 63 25 70 e0 00 00:00:35.200 READ DMA EXT
|
||||
25 00 00 00 80 00 00 00 60 e3 d8 e0 00 00:00:35.190 READ DMA EXT
|
||||
|
||||
Error 500 [3] occurred at disk power-on lifetime: 18428 hours (767 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 f2 a5 e0 00 Error: UNC at LBA = 0x0000f2a5 = 62117
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 00 00 f2 a0 e0 00 00:00:34.220 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 f2 98 e0 00 00:00:34.220 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 00 f2 90 e0 00 00:00:34.220 WRITE DMA EXT
|
||||
25 00 00 00 08 00 00 02 dd bb 20 e0 00 00:00:34.210 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 01 02 88 e0 00 00:00:34.210 READ DMA EXT
|
||||
|
||||
Error 499 [2] occurred at disk power-on lifetime: 18428 hours (767 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- d0 00 08 00 00 00 5f 2e 70 e0 00 8 sectors at LBA = 0x005f2e70 = 6237808
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 00 00 f2 a0 e0 00 00:00:33.050 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 5f 2e 68 e0 00 00:00:33.050 READ DMA EXT
|
||||
|
||||
Error 498 [1] occurred at disk power-on lifetime: 18428 hours (767 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 00 f2 a5 e0 00 Error: UNC at LBA = 0x0000f2a5 = 62117
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 00 00 f2 a0 e0 00 00:00:32.080 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 5f 2e 88 e0 00 00:00:32.080 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 00 f2 a8 e0 00 00:00:32.050 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 5f 2e 80 e0 00 00:00:32.050 READ DMA EXT
|
||||
25 00 00 00 08 00 00 00 00 f2 98 e0 00 00:00:32.050 READ DMA EXT
|
||||
|
||||
Error 497 [0] occurred at disk power-on lifetime: 12708 hours (529 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 60 63 ae e0 00 Error: UNC at LBA = 0x006063ae = 6316974
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 80 00 00 00 60 63 3f e0 00 03:42:06.920 READ DMA EXT
|
||||
25 00 00 00 80 00 00 00 60 62 bf e0 00 03:42:06.920 READ DMA EXT
|
||||
25 00 00 00 80 00 00 00 60 62 3f e0 00 03:42:06.920 READ DMA EXT
|
||||
25 00 00 00 80 00 00 00 60 61 bf e0 00 03:42:06.920 READ DMA EXT
|
||||
25 00 00 00 80 00 00 00 60 61 3f e0 00 03:42:06.920 READ DMA EXT
|
||||
|
||||
Error 496 [7] occurred at disk power-on lifetime: 12704 hours (529 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 00 60 63 ae e0 00 Error: UNC at LBA = 0x006063ae = 6316974
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 00 60 63 a7 e0 00 00:32:43.300 READ DMA EXT
|
||||
35 00 00 00 48 00 00 00 5f 07 0f e0 00 00:32:43.300 WRITE DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 00 e0 00 00:32:43.280 READ DMA EXT
|
||||
35 00 00 00 38 00 00 21 61 96 bf e0 00 00:32:43.280 WRITE DMA EXT
|
||||
35 00 00 00 60 00 00 20 80 7b 9f e0 00 00:32:43.280 WRITE DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: --/30 Celsius
|
||||
Lifetime Min/Max Temperature: --/42 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (101)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
324
HDD/Samsung/HD322/HD322HJ/1781E38E584F
Normal file
324
HDD/Samsung/HD322/HD322HJ/1781E38E584F
Normal file
@@ -0,0 +1,324 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F1 DT
|
||||
Device Model: SAMSUNG HD322HJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 1AG01118
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Tue Nov 12 11:00:11 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4636) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 78) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 9) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
||||
3 Spin_Up_Time POS--- 085 085 011 - 5420
|
||||
4 Start_Stop_Count -O--CK 096 096 000 - 3919
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 253 253 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 0
|
||||
9 Power_On_Hours -O--CK 099 099 000 - 3702
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 271
|
||||
12 Power_Cycle_Count -O--CK 096 096 000 - 3917
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 077 064 000 - 23 (Min/Max 16/23)
|
||||
194 Temperature_Celsius -O---K 073 064 000 - 27 (Min/Max 16/27)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 61883
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 113
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL R/O 2 Streaming performance log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 113 (device log contains only the most recent 8 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 113 [0] occurred at disk power-on lifetime: 3701 hours (154 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 01 d8 00 00 00 48 ba e8 40 00 00:30:53.710 WRITE FPDMA QUEUED
|
||||
ca 00 00 00 4e 00 00 00 09 17 44 41 08 00:30:53.710 WRITE DMA
|
||||
60 00 00 00 18 00 00 00 59 1b 68 40 00 00:30:53.580 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 a4 23 d0 40 00 00:30:53.580 READ FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 09 16 d0 40 00 00:30:53.580 WRITE FPDMA QUEUED
|
||||
|
||||
Error 112 [7] occurred at disk power-on lifetime: 3701 hours (154 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 01 08 00 00 00 48 b8 e8 40 00 00:29:53.120 WRITE FPDMA QUEUED
|
||||
ca 00 00 00 6d 00 00 00 09 14 d4 41 08 00:29:53.120 WRITE DMA
|
||||
60 00 00 00 08 00 00 00 d2 8a d0 40 00 00:29:53.090 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 a4 23 b0 40 00 00:29:53.090 READ FPDMA QUEUED
|
||||
60 00 00 00 08 00 00 00 d2 91 70 40 00 00:29:53.090 READ FPDMA QUEUED
|
||||
|
||||
Error 111 [6] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ca 00 00 00 c0 00 00 00 7e d7 e8 40 08 00:16:00.500 WRITE DMA
|
||||
61 00 00 01 00 00 00 00 7e d6 e8 40 00 00:16:00.490 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 7e d6 a8 40 00 00:16:00.490 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 00 7e d6 a0 40 00 00:16:00.490 WRITE FPDMA QUEUED
|
||||
61 00 00 00 18 00 00 00 7e d6 88 40 00 00:16:00.490 WRITE FPDMA QUEUED
|
||||
|
||||
Error 110 [5] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- d0 00 10 00 00 00 7e c5 58 40 00 at LBA = 0x007ec558 = 8308056
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 20 00 00 00 7e c5 28 40 00 00:14:59.930 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 00 7e c5 20 40 00 00:14:59.930 WRITE FPDMA QUEUED
|
||||
61 00 00 00 38 00 00 00 7e c4 e8 40 00 00:14:59.930 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 7e c4 a8 40 00 00:14:59.930 WRITE FPDMA QUEUED
|
||||
61 00 00 00 08 00 00 00 7e c4 a0 40 00 00:14:59.930 WRITE FPDMA QUEUED
|
||||
|
||||
Error 109 [4] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ca 00 00 00 10 00 00 00 08 bd f0 40 08 00:13:59.540 WRITE DMA
|
||||
61 00 00 00 40 00 00 00 d2 f9 68 40 00 00:13:59.530 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 9e 6b a8 40 00 00:13:59.530 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 9e 6b 68 40 00 00:13:59.530 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 8a e1 e8 40 00 00:13:59.530 WRITE FPDMA QUEUED
|
||||
|
||||
Error 108 [3] occurred at disk power-on lifetime: 3692 hours (153 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 40 00 00 00 63 ce a8 40 00 00:12:59.200 WRITE FPDMA QUEUED
|
||||
ca 00 00 00 2f 00 00 00 63 ce fa 43 08 00:12:59.200 WRITE DMA
|
||||
61 00 00 00 08 00 00 00 64 6a e8 40 00 00:12:59.200 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 63 ce a8 40 00 00:12:59.200 WRITE FPDMA QUEUED
|
||||
60 00 00 00 40 00 00 00 63 ce a8 40 00 00:12:59.200 READ FPDMA QUEUED
|
||||
|
||||
Error 107 [2] occurred at disk power-on lifetime: 3691 hours (153 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ca 00 00 00 18 00 00 00 7e e7 48 40 08 00:22:15.490 WRITE DMA
|
||||
61 00 00 00 20 00 00 00 7e e7 28 40 00 00:22:15.480 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 7e e6 e8 40 00 00:22:15.480 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 7e e6 a8 40 00 00:22:15.480 WRITE FPDMA QUEUED
|
||||
61 00 00 00 38 00 00 00 7e e6 68 40 00 00:22:15.480 WRITE FPDMA QUEUED
|
||||
|
||||
Error 106 [1] occurred at disk power-on lifetime: 3691 hours (153 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ca 00 00 00 10 00 00 00 7e d8 d8 40 08 00:21:14.990 WRITE DMA
|
||||
61 00 00 00 30 00 00 00 7e d8 a8 40 00 00:21:14.980 WRITE FPDMA QUEUED
|
||||
61 00 00 00 c0 00 00 00 7e d7 e8 40 00 00:21:14.980 WRITE FPDMA QUEUED
|
||||
61 00 00 01 00 00 00 00 7e d6 e8 40 00 00:21:14.980 WRITE FPDMA QUEUED
|
||||
61 00 00 00 40 00 00 00 7e d6 a8 40 00 00:21:14.980 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 27 Celsius
|
||||
Power Cycle Min/Max Temperature: --/27 Celsius
|
||||
Lifetime Min/Max Temperature: --/35 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (119)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 13 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
344
HDD/Samsung/HD322/HD322HJ/395B001360E6
Normal file
344
HDD/Samsung/HD322/HD322HJ/395B001360E6
Normal file
@@ -0,0 +1,344 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F1 DT
|
||||
Device Model: SAMSUNG HD322HJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0000f0 ...
|
||||
Firmware Version: 1AC01113
|
||||
User Capacity: 320,071,851,520 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Mon Sep 4 21:50:58 2023 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4081) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 69) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 8) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
||||
3 Spin_Up_Time POS--- 093 093 011 - 2980
|
||||
4 Start_Stop_Count -O--CK 084 084 000 - 15799
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 9946
|
||||
9 Power_On_Hours -O--CK 094 094 000 - 29716
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 1
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
|
||||
12 Power_Cycle_Count -O--CK 085 085 000 - 15225
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 071 062 000 - 29 (Min/Max 29/29)
|
||||
194 Temperature_Celsius -O---K 071 061 000 - 29 (Min/Max 29/30)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1267
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 20
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL R/O 2 Write stream error log
|
||||
0x22 GPL R/O 2 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 20 (device log contains only the most recent 8 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 20 [3] occurred at disk power-on lifetime: 28951 hours (1206 days + 7 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 53 00 19 00 00 0d 41 20 df e0 00 Error: ABRT 25 sectors at LBA = 0x0d4120df = 222372063
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 80 00 00 0d 41 20 78 e0 00 05:32:27.390 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 0d 41 1f f8 e0 00 05:32:27.390 WRITE DMA EXT
|
||||
35 00 00 00 40 00 00 0d 41 1f b8 e0 00 05:32:27.390 WRITE DMA EXT
|
||||
35 00 00 00 70 00 00 0d 41 1f 48 e0 00 05:32:27.390 WRITE DMA EXT
|
||||
35 00 00 00 78 00 00 0d 41 1e d0 e0 00 05:32:27.390 WRITE DMA EXT
|
||||
|
||||
Error 19 [2] occurred at disk power-on lifetime: 28950 hours (1206 days + 6 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 53 00 1c 00 00 0d 55 5d 24 e0 00 Error: ABRT 28 sectors at LBA = 0x0d555d24 = 223698212
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 80 00 00 0d 55 5c c0 e0 00 04:17:26.920 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 0d 55 5c 40 e0 00 04:17:26.920 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 0d 55 5b c0 e0 00 04:17:26.920 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 0d 55 5b 40 e0 00 04:17:26.920 WRITE DMA EXT
|
||||
35 00 00 00 80 00 00 0d 55 5a c0 e0 00 04:17:26.910 WRITE DMA EXT
|
||||
|
||||
Error 18 [1] occurred at disk power-on lifetime: 22458 hours (935 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 48 00 18 00 00 13 89 83 50 40 00 at LBA = 0x13898350 = 327779152
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 00 00 48 00 00 00 89 83 20 40 00 02:47:03.590 WRITE FPDMA QUEUED
|
||||
61 00 00 00 50 00 00 00 89 84 a0 40 00 02:47:03.590 WRITE FPDMA QUEUED
|
||||
61 00 00 00 50 00 00 00 89 84 20 40 00 02:47:03.590 WRITE FPDMA QUEUED
|
||||
61 00 00 00 48 00 00 00 89 83 a0 40 00 02:47:03.590 WRITE FPDMA QUEUED
|
||||
61 00 00 00 48 00 00 00 89 83 20 40 00 02:47:03.590 WRITE FPDMA QUEUED
|
||||
|
||||
Error 17 [0] occurred at disk power-on lifetime: 13329 hours (555 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 ff ef 00 00 00 00 9d e4 e0 00 Error: ABRT at LBA = 0x00009de4 = 40420
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
29 00 00 00 00 00 00 00 00 9d d3 e0 00 00:00:44.260 READ MULTIPLE EXT
|
||||
25 00 00 00 01 00 00 00 00 9d d3 e0 00 00:00:28.320 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 9d d2 e0 00 00:00:28.320 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 9d d1 e0 00 00:00:28.320 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 9d d0 e0 00 00:00:28.320 READ DMA EXT
|
||||
|
||||
Error 16 [7] occurred at disk power-on lifetime: 5803 hours (241 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 ff ef 00 00 00 00 00 25 e0 00 Error: ABRT at LBA = 0x00000025 = 37
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
29 00 00 00 00 00 00 00 00 00 14 e0 00 00:35:52.180 READ MULTIPLE EXT
|
||||
25 00 00 00 01 00 00 00 00 00 14 e0 00 00:35:42.080 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 13 e0 00 00:35:42.080 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 12 e0 00 00:35:42.080 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 11 e0 00 00:35:42.080 READ DMA EXT
|
||||
|
||||
Error 15 [6] occurred at disk power-on lifetime: 5802 hours (241 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 ff ef 00 00 00 00 00 23 e0 00 Error: ABRT at LBA = 0x00000023 = 35
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
29 00 00 00 00 00 00 00 00 00 12 e0 00 00:26:43.520 READ MULTIPLE EXT
|
||||
25 00 00 00 01 00 00 00 00 00 12 e0 00 00:26:33.040 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 11 e0 00 00:26:33.040 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 10 e0 00 00:26:33.040 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 0f e0 00 00:26:33.040 READ DMA EXT
|
||||
|
||||
Error 14 [5] occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 ff ef 00 00 00 00 00 14 e0 00 Error: ABRT at LBA = 0x00000014 = 20
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
29 00 00 00 00 00 00 00 00 00 03 e0 00 00:00:48.300 READ MULTIPLE EXT
|
||||
25 00 00 00 01 00 00 00 00 00 03 e0 00 00:00:36.020 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 02 e0 00 00:00:36.020 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 01 e0 00 00:00:36.020 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:36.020 READ DMA EXT
|
||||
|
||||
Error 13 [4] occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 ff ef 00 00 00 00 00 2e e0 00 Error: ABRT at LBA = 0x0000002e = 46
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
29 00 00 00 00 00 00 00 00 00 1d e0 00 00:00:33.160 READ MULTIPLE EXT
|
||||
25 00 00 00 01 00 00 00 00 00 1d e0 00 00:00:22.290 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 1c e0 00 00:00:22.290 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 1b e0 00 00:00:22.290 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 1a e0 00 00:00:22.290 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 29708 -
|
||||
# 2 Extended offline Completed without error 00% 29702 -
|
||||
# 3 Short offline Completed without error 00% 29668 -
|
||||
# 4 Short offline Completed without error 00% 29655 -
|
||||
# 5 Short offline Completed without error 00% 29644 -
|
||||
# 6 Short offline Completed without error 00% 29626 -
|
||||
# 7 Short offline Completed without error 00% 29610 -
|
||||
# 8 Short offline Completed without error 00% 29594 -
|
||||
# 9 Short offline Completed without error 00% 29585 -
|
||||
#10 Short offline Completed without error 00% 29576 -
|
||||
#11 Short offline Completed without error 00% 29571 -
|
||||
#12 Short offline Completed without error 00% 29556 -
|
||||
#13 Short offline Completed without error 00% 29541 -
|
||||
#14 Short offline Completed without error 00% 29525 -
|
||||
#15 Short offline Completed without error 00% 29509 -
|
||||
#16 Short offline Completed without error 00% 29493 -
|
||||
#17 Extended offline Aborted by host 10% 29489 -
|
||||
#18 Short offline Completed without error 00% 29484 -
|
||||
#19 Short offline Completed without error 00% 29475 -
|
||||
#20 Short offline Completed without error 00% 29459 -
|
||||
#21 Short offline Completed without error 00% 29448 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 29 Celsius
|
||||
Power Cycle Min/Max Temperature: --/30 Celsius
|
||||
Lifetime Min/Max Temperature: --/44 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (10)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 36 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 36 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
179
HDD/Samsung/HD322/HD322HJ/B8A2FD0D4CDA
Normal file
179
HDD/Samsung/HD322/HD322HJ/B8A2FD0D4CDA
Normal file
@@ -0,0 +1,179 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F1 DT
|
||||
Device Model: SAMSUNG HD322HJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 1AC01118
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Mon Mar 11 20:59:56 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4052) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 68) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 8) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
||||
3 Spin_Up_Time POS--- 092 092 011 - 3260
|
||||
4 Start_Stop_Count -O--CK 092 092 000 - 8181
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 015 - 9845
|
||||
9 Power_On_Hours -O--CK 099 099 000 - 4795
|
||||
10 Spin_Retry_Count PO--CK 100 100 051 - 1
|
||||
11 Calibration_Retry_Count -O--C- 100 100 000 - 3
|
||||
12 Power_Cycle_Count -O--CK 095 095 000 - 5472
|
||||
13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 079 070 000 - 21 (Min/Max 17/21)
|
||||
194 Temperature_Celsius -O---K 076 070 000 - 24 (Min/Max 17/24)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 126271
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x04 GPL R/O 2 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x20 GPL R/O 2 Streaming performance log
|
||||
0x21 GPL R/O 1 Write stream error log
|
||||
0x22 GPL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 4714 -
|
||||
# 2 Short offline Completed without error 00% 4707 -
|
||||
# 3 Short offline Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: --/24 Celsius
|
||||
Lifetime Min/Max Temperature: --/33 Celsius
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -4/72 Celsius
|
||||
Min/Max Temperature Limit: -9/77 Celsius
|
||||
Temperature History Size (Index): 128 (88)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error
|
||||
Read Device Statistics page 0x00 failed
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
99
HDD/Samsung/HD322/HD322HJ/BB412E76307A
Normal file
99
HDD/Samsung/HD322/HD322HJ/BB412E76307A
Normal file
@@ -0,0 +1,99 @@
|
||||
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.9] (local build)
|
||||
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint F1 DT
|
||||
Device Model: SAMSUNG HD322HJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 1AC01118
|
||||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
|
||||
Local Time is: Sun Jul 16 02:31:53 2023 EEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4123) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x7b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 70) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 8) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
|
||||
3 Spin_Up_Time 0x0007 094 094 011 Pre-fail Always - 2760
|
||||
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1259
|
||||
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
|
||||
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
|
||||
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
|
||||
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 23374
|
||||
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
|
||||
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
|
||||
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1256
|
||||
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
|
||||
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
|
||||
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
|
||||
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
||||
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
|
||||
190 Airflow_Temperature_Cel 0x0022 067 063 000 Old_age Always - 33 (Min/Max 32/33)
|
||||
194 Temperature_Celsius 0x0022 067 061 000 Old_age Always - 33 (Min/Max 32/35)
|
||||
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 954910
|
||||
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
|
||||
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
|
||||
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
Reference in New Issue
Block a user