mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
191
HDD/Samsung/HM500/HM500JI/1D3D0CAE9F3E
Normal file
191
HDD/Samsung/HM500/HM500JI/1D3D0CAE9F3E
Normal file
@@ -0,0 +1,191 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint M7
|
||||
Device Model: SAMSUNG HM500JI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 2AC101U4
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 2.6, 1.5 Gb/s
|
||||
Local Time is: Tue Dec 5 03:38:54 2023 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 8100) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 135) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 36
|
||||
2 Throughput_Performance -OS--K 252 252 000 - 0
|
||||
3 Spin_Up_Time PO---K 090 089 025 - 3250
|
||||
4 Start_Stop_Count -O--CK 094 094 000 - 6234
|
||||
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
|
||||
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
|
||||
8 Seek_Time_Performance --S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 6356
|
||||
10 Spin_Retry_Count -O--CK 252 252 051 - 0
|
||||
11 Calibration_Retry_Count -O--CK 099 099 000 - 1086
|
||||
12 Power_Cycle_Count -O--CK 094 094 000 - 6154
|
||||
191 G-Sense_Error_Rate -O---K 100 100 000 - 57
|
||||
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
|
||||
194 Temperature_Celsius -O---- 062 046 000 - 38 (Min/Max 6/57)
|
||||
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 252 252 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 7662
|
||||
223 Load_Retry_Count -O--CK 099 099 000 - 1086
|
||||
225 Load_Cycle_Count -O--CK 085 085 000 - 151548
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 1
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xbb GPL VS 4 Device vendor specific log
|
||||
0xbc GPL VS 2 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Completed [00% left] (0-65535)
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 38 Celsius
|
||||
Power Cycle Min/Max Temperature: 36/38 Celsius
|
||||
Lifetime Min/Max Temperature: 9/64 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 5 minutes
|
||||
Temperature Logging Interval: 5 minutes
|
||||
Min/Max recommended Temperature: -5/80 Celsius
|
||||
Min/Max Temperature Limit: -10/85 Celsius
|
||||
Temperature History Size (Index): 128 (19)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
0x8e00 4 0 Vendor specific
|
||||
0x8e01 4 0 Vendor specific
|
||||
0x8e02 4 0 Vendor specific
|
||||
0x8e03 4 0 Vendor specific
|
||||
0x8e04 4 0 Vendor specific
|
||||
0x8e05 4 0 Vendor specific
|
||||
0x8e06 4 0 Vendor specific
|
||||
0x8e07 4 0 Vendor specific
|
||||
0x8e08 4 0 Vendor specific
|
||||
0x8e09 4 0 Vendor specific
|
||||
0x8e0a 4 0 Vendor specific
|
||||
0x8e0b 4 0 Vendor specific
|
||||
0x8e0c 4 0 Vendor specific
|
||||
0x8e0d 4 0 Vendor specific
|
||||
0x8e0e 4 0 Vendor specific
|
||||
0x8e0f 4 0 Vendor specific
|
||||
0x8e10 4 0 Vendor specific
|
||||
0x8e11 4 0 Vendor specific
|
||||
|
||||
262
HDD/Samsung/HM500/HM500JJ/015D60D249F5
Normal file
262
HDD/Samsung/HM500/HM500JJ/015D60D249F5
Normal file
@@ -0,0 +1,262 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint MP5
|
||||
Device Model: SAMSUNG HM500JJ
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0024e9 ...
|
||||
Firmware Version: 2AK10002
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Sun May 14 13:04:32 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
|
||||
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: FAILED!
|
||||
Drive failure expected in less than 24 hours. SAVE ALL DATA.
|
||||
See vendor-specific Attribute list for failed Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 6240) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 104) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 001 001 051 NOW 109933
|
||||
2 Throughput_Performance POS--K 252 252 000 - 0
|
||||
3 Spin_Up_Time PO---K 090 088 025 - 3219
|
||||
4 Start_Stop_Count -O--CK 097 097 000 - 3864
|
||||
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
|
||||
7 Seek_Error_Rate POSR-K 252 252 051 - 0
|
||||
8 Seek_Time_Performance P-S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 3337
|
||||
10 Spin_Retry_Count PO--CK 252 252 051 - 0
|
||||
11 Calibration_Retry_Count -O--CK 100 100 000 - 306
|
||||
12 Power_Cycle_Count -O--CK 097 097 000 - 3706
|
||||
183 Runtime_Bad_Block -O--CK 100 100 010 - 2
|
||||
184 End-to-End_Error PO--CK 252 252 048 - 0
|
||||
186 Unknown_Attribute -O--CK 252 252 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 44529
|
||||
188 Command_Timeout -O--CK 100 100 000 - 62
|
||||
190 Airflow_Temperature_Cel -O---- 069 048 040 - 31 (Min/Max 16/54)
|
||||
191 G-Sense_Error_Rate -O---K 099 099 000 - 19523
|
||||
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
|
||||
193 Load_Cycle_Count -O--CK 097 097 000 - 31280
|
||||
194 Temperature_Celsius -O---- 064 048 000 - 31 (Min/Max 16/54)
|
||||
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 094 078 000 - 551
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1
|
||||
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 5247
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
|
||||
Read GP Log Directory failed
|
||||
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x80-0x9f SL R/W 16 Host vendor specific log
|
||||
0xe0 SL R/W 1 SCT Command/Status
|
||||
0xe1 SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 751 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 751 occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 08 00 08 b5 e3 Error: UNC 8 sectors at LBA = 0x03b50800 = 62195712
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 00 08 b5 e3 08 00:00:02.325 READ DMA
|
||||
35 00 00 00 08 71 e0 08 00:00:02.325 WRITE DMA EXT
|
||||
ec 00 00 00 00 00 a0 08 00:00:02.325 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 08 00:00:02.325 SET FEATURES [Set transfer mode]
|
||||
ec 00 00 00 00 00 a0 08 00:00:02.324 IDENTIFY DEVICE
|
||||
|
||||
Error 750 occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 08 00 08 b5 e3 Error: UNC 8 sectors at LBA = 0x03b50800 = 62195712
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 00 08 b5 e3 08 00:00:02.322 READ DMA
|
||||
c8 00 08 00 08 35 e3 08 00:00:02.322 READ DMA
|
||||
c8 00 08 00 08 dd e2 08 00:00:02.322 READ DMA
|
||||
c8 00 08 00 08 d5 e2 08 00:00:02.322 READ DMA
|
||||
c8 00 08 00 08 95 e2 08 00:00:02.322 READ DMA
|
||||
|
||||
Error 749 occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 05 03 08 75 e3 Error: UNC 5 sectors at LBA = 0x03750803 = 58001411
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 00 08 75 e3 08 00:00:02.318 READ DMA
|
||||
c8 00 08 f8 07 e2 e4 08 00:00:02.318 READ DMA
|
||||
c8 00 08 f0 07 e2 e4 08 00:00:02.318 READ DMA
|
||||
ec 00 00 00 00 00 a0 08 00:00:02.318 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 08 00:00:02.318 SET FEATURES [Set transfer mode]
|
||||
|
||||
Error 748 occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 05 03 08 75 e3 Error: UNC 5 sectors at LBA = 0x03750803 = 58001411
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 00 08 75 e3 08 00:00:02.316 READ DMA
|
||||
c8 00 08 80 07 e2 e4 08 00:00:02.316 READ DMA
|
||||
ec 00 00 00 00 00 a0 08 00:00:02.316 IDENTIFY DEVICE
|
||||
ef 03 46 00 00 00 a0 08 00:00:02.316 SET FEATURES [Set transfer mode]
|
||||
ec 00 00 00 00 00 a0 08 00:00:02.316 IDENTIFY DEVICE
|
||||
|
||||
Error 747 occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 05 03 08 75 e3 Error: UNC 5 sectors at LBA = 0x03750803 = 58001411
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
c8 00 08 00 08 75 e3 08 00:00:02.314 READ DMA
|
||||
c8 00 08 08 29 71 e2 08 00:00:02.314 READ DMA
|
||||
c8 00 40 20 08 71 e2 08 00:00:02.314 READ DMA
|
||||
c8 00 20 00 08 71 e2 08 00:00:02.314 READ DMA
|
||||
ea 00 00 ff 5f 38 e0 08 00:00:02.314 FLUSH CACHE EXT
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Completed [00% left] (0-65535)
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: 30/30 Celsius
|
||||
Lifetime Min/Max Temperature: 20/65 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 5 minutes
|
||||
Temperature Logging Interval: 5 minutes
|
||||
Min/Max recommended Temperature: -5/80 Celsius
|
||||
Min/Max Temperature Limit: -10/85 Celsius
|
||||
Temperature History Size (Index): 128 (56)
|
||||
|
||||
Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
|
||||
SCT (Get) Error Recovery Control command failed
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
|
||||
Read SATA Phy Event Counters failed
|
||||
|
||||
282
HDD/Samsung/HM500/HM500LI/AE5BB85BC160
Normal file
282
HDD/Samsung/HM500/HM500LI/AE5BB85BC160
Normal file
@@ -0,0 +1,282 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint M6
|
||||
Device Model: SAMSUNG HM500LI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0f0000 ...
|
||||
Firmware Version: 2TF00_00
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.2/5319
|
||||
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Fri Mar 22 10:21:24 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 0 (vendor specific), recommended: 254
|
||||
APM level is: 1 (minimum power consumption with standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Disabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 169) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 169) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
||||
3 Spin_Up_Time POS--- 252 252 025 - 3500
|
||||
4 Start_Stop_Count -O--CK 061 061 000 - 39458
|
||||
5 Reallocated_Sector_Ct PO--CK 066 066 010 - 323
|
||||
7 Seek_Error_Rate -OSR-- 252 252 051 - 0
|
||||
8 Seek_Time_Performance --S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 032 032 000 - 34841
|
||||
10 Spin_Retry_Count -O--CK 100 100 051 - 6
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 510
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 724
|
||||
192 Power-Off_Retract_Count -O--CK 252 252 000 - 0
|
||||
194 Temperature_Celsius -O---K 163 055 000 - 25 (Min/Max 14/61)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 252 252 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 35
|
||||
225 Load_Cycle_Count -O--CK 013 013 000 - 881381
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x08 SL R/O 1 Power Conditions log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80 GPL,SL R/W 16 Host vendor specific log
|
||||
0x81-0x9f SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 5
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 5 [4] occurred at disk power-on lifetime: 18615 hours (775 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 08 00 00 13 fa b1 05 40 00 Error: ICRC, ABRT at LBA = 0x13fab105 = 335196421
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 08 00 00 13 fa b1 05 40 00 00:04:02.875 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 13 fa b0 05 40 00 00:04:02.875 READ FPDMA QUEUED
|
||||
ef 00 05 00 80 00 00 00 00 00 00 40 00 00:04:02.750 SET FEATURES [Enable APM]
|
||||
60 01 00 00 08 00 00 13 fa af 04 40 00 00:04:02.750 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 13 fa ae 04 40 00 00:04:02.750 READ FPDMA QUEUED
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 24419 hours (1017 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 01 00 00 00 30 d6 a1 4b 40 00 Error: ABRT at LBA = 0x30d6a14b = 819372363
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 05 01 00 00 00 30 d6 a1 4b 40 00 1d+08:30:07.312 WRITE FPDMA QUEUED
|
||||
60 00 80 00 08 00 00 00 1a 7a 00 40 00 1d+08:30:07.312 READ FPDMA QUEUED
|
||||
61 00 04 01 00 00 00 30 d6 a1 47 40 00 1d+08:30:07.250 WRITE FPDMA QUEUED
|
||||
60 00 80 02 08 00 00 00 1a 79 80 40 00 1d+08:30:07.250 READ FPDMA QUEUED
|
||||
60 00 02 00 10 00 00 2d 35 c0 69 40 00 1d+08:30:07.250 READ FPDMA QUEUED
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 24410 hours (1017 days + 2 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 03 10 00 00 2d 1f ac fa 40 00 Error: ABRT at LBA = 0x2d1facfa = 757050618
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 02 03 10 00 00 2d 1f ac fa 40 00 23:45:23.375 READ FPDMA QUEUED
|
||||
60 00 02 00 18 00 00 38 82 0b 8c 40 00 23:45:23.375 READ FPDMA QUEUED
|
||||
60 00 02 06 00 00 00 30 e1 79 1b 40 00 23:45:23.375 READ FPDMA QUEUED
|
||||
60 00 02 03 30 00 00 30 97 68 ee 40 00 23:45:23.375 READ FPDMA QUEUED
|
||||
60 00 02 06 18 00 00 2d 4c fe 57 40 00 23:45:23.375 READ FPDMA QUEUED
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 18615 hours (775 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 08 00 00 13 fa b7 fb 40 00 Error: ICRC, ABRT at LBA = 0x13fab7fb = 335198203
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 08 00 00 13 fa b7 fb 40 00 00:04:10.062 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 13 fa b6 fb 40 00 00:04:10.062 READ FPDMA QUEUED
|
||||
ef 00 42 00 00 00 00 00 00 00 00 40 00 00:04:09.937 SET FEATURES [Enable AAM] [OBS-ACS-2]
|
||||
60 01 00 00 08 00 00 13 fa b5 fa 40 00 00:04:09.937 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 13 fa b4 fa 40 00 00:04:09.937 READ FPDMA QUEUED
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 18615 hours (775 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 08 00 00 13 fa b1 05 40 00 Error: ICRC, ABRT at LBA = 0x13fab105 = 335196421
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 01 00 00 08 00 00 13 fa b1 05 40 00 00:04:02.875 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 13 fa b0 05 40 00 00:04:02.875 READ FPDMA QUEUED
|
||||
ef 00 05 00 80 00 00 00 00 00 00 40 00 00:04:02.750 SET FEATURES [Enable APM]
|
||||
60 01 00 00 08 00 00 13 fa af 04 40 00 00:04:02.750 READ FPDMA QUEUED
|
||||
60 01 00 00 00 00 00 13 fa ae 04 40 00 00:04:02.750 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 34829 -
|
||||
# 2 Short offline Completed without error 00% 34799 -
|
||||
# 3 Short offline Completed without error 00% 34776 -
|
||||
# 4 Short offline Completed without error 00% 34740 -
|
||||
# 5 Short offline Completed without error 00% 34661 -
|
||||
# 6 Short offline Completed without error 00% 34638 -
|
||||
# 7 Short offline Completed without error 00% 34610 -
|
||||
# 8 Short offline Completed without error 00% 34539 -
|
||||
# 9 Short offline Completed without error 00% 34525 -
|
||||
#10 Short offline Completed without error 00% 34510 -
|
||||
#11 Short offline Completed without error 00% 34494 -
|
||||
#12 Short offline Completed without error 00% 34386 -
|
||||
#13 Short offline Completed without error 00% 34223 -
|
||||
#14 Short offline Completed without error 00% 34203 -
|
||||
#15 Short offline Completed without error 00% 34185 -
|
||||
#16 Short offline Completed without error 00% 33760 -
|
||||
#17 Extended offline Completed without error 00% 33698 -
|
||||
#18 Short offline Completed without error 00% 33072 -
|
||||
#19 Short offline Completed without error 00% 33055 -
|
||||
#20 Short offline Completed without error 00% 33015 -
|
||||
#21 Short offline Completed without error 00% 33002 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Completed [00% left] (0-65535)
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 25 Celsius
|
||||
Power Cycle Min/Max Temperature: 22/26 Celsius
|
||||
Lifetime Min/Max Temperature: 15/58 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 15/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (111)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 1 (0.1 seconds)
|
||||
Write: 1 (0.1 seconds)
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x8001 2 0 Vendor specific
|
||||
|
||||
|
||||
|
||||
263
HDD/Samsung/HM500/HM500LI/DC95913F4A67
Normal file
263
HDD/Samsung/HM500/HM500LI/DC95913F4A67
Normal file
@@ -0,0 +1,263 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SAMSUNG SpinPoint M6
|
||||
Device Model: SAMSUNG HM500LI
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0f0000 ...
|
||||
Firmware Version: 2TF00_00
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.2/5319
|
||||
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
|
||||
SATA Version is: SATA 2.5, 3.0 Gb/s
|
||||
Local Time is: Fri Mar 22 10:21:27 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM level is: 0 (vendor specific), recommended: 254
|
||||
APM level is: 1 (minimum power consumption with standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Disabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 165) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 165) minutes.
|
||||
SCT capabilities: (0x003f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
||||
3 Spin_Up_Time POS--- 252 252 025 - 3500
|
||||
4 Start_Stop_Count -O--CK 072 072 000 - 28369
|
||||
5 Reallocated_Sector_Ct PO--CK 080 080 010 - 189
|
||||
7 Seek_Error_Rate -OSR-- 252 252 051 - 0
|
||||
8 Seek_Time_Performance --S--K 252 252 015 - 0
|
||||
9 Power_On_Hours -O--CK 067 067 000 - 17377
|
||||
10 Spin_Retry_Count -O--CK 100 100 051 - 4
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 384
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 166
|
||||
192 Power-Off_Retract_Count -O--CK 252 252 000 - 0
|
||||
194 Temperature_Celsius -O---K 163 070 000 - 25 (Min/Max 13/56)
|
||||
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
||||
197 Current_Pending_Sector -O--C- 252 252 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
||||
201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 3
|
||||
225 Load_Cycle_Count -O--CK 065 065 000 - 360792
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 2 Comprehensive SMART error log
|
||||
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x08 SL R/O 1 Power Conditions log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80 GPL,SL R/W 16 Host vendor specific log
|
||||
0x81-0x9f SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
||||
Device Error Count: 4
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 4 [3] occurred at disk power-on lifetime: 16561 hours (690 days + 1 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 02 00 00 00 08 38 17 d8 40 00 Error: ABRT at LBA = 0x083817d8 = 137893848
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 08 00 02 00 00 00 08 38 17 d8 40 00 01:07:46.000 READ FPDMA QUEUED
|
||||
60 08 00 01 10 00 00 08 38 0f d8 40 00 01:07:46.000 READ FPDMA QUEUED
|
||||
60 08 00 02 08 00 00 08 38 07 d8 40 00 01:07:45.937 READ FPDMA QUEUED
|
||||
60 08 00 00 10 00 00 08 37 ff d8 40 00 01:07:45.937 READ FPDMA QUEUED
|
||||
60 08 00 01 00 00 00 08 37 f7 d8 40 00 01:07:45.937 READ FPDMA QUEUED
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 6955 hours (289 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 08 00 00 2c 75 0b b2 40 00 Error: ABRT at LBA = 0x2c750bb2 = 745868210
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 80 00 08 00 00 2c 75 0b b2 40 00 08:26:45.187 WRITE FPDMA QUEUED
|
||||
60 00 03 00 00 00 00 2c 2e 86 22 40 00 08:26:45.187 READ FPDMA QUEUED
|
||||
61 00 04 00 00 00 00 2c 58 3a 5d 40 00 08:26:45.187 WRITE FPDMA QUEUED
|
||||
61 00 04 00 00 00 00 22 20 49 18 40 00 08:26:45.187 WRITE FPDMA QUEUED
|
||||
61 00 0e 00 00 00 00 2c 75 0c da 40 00 08:26:45.187 WRITE FPDMA QUEUED
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 6955 hours (289 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 01 08 00 00 2c 57 e2 c7 40 00 Error: ABRT at LBA = 0x2c57e2c7 = 743957191
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
61 00 02 01 08 00 00 2c 57 e2 c7 40 00 08:26:06.437 WRITE FPDMA QUEUED
|
||||
61 00 02 01 08 00 00 2c 57 e2 c4 40 00 08:26:06.375 WRITE FPDMA QUEUED
|
||||
61 00 02 01 08 00 00 22 1f b4 ee 40 00 08:26:06.375 WRITE FPDMA QUEUED
|
||||
61 00 02 01 08 00 00 22 1f 49 ab 40 00 08:26:06.375 WRITE FPDMA QUEUED
|
||||
61 00 05 01 08 00 00 19 ff 1d be 40 00 08:26:06.375 WRITE FPDMA QUEUED
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 6955 hours (289 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 03 20 00 00 2c 0d af 51 40 00 Error: ABRT at LBA = 0x2c0daf51 = 739094353
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 02 03 20 00 00 2c 0d af 51 40 00 08:25:00.875 READ FPDMA QUEUED
|
||||
61 00 51 02 18 00 00 2c 72 65 43 40 00 08:25:00.875 WRITE FPDMA QUEUED
|
||||
61 01 00 01 10 00 00 2c 72 64 43 40 00 08:25:00.875 WRITE FPDMA QUEUED
|
||||
61 00 39 00 08 00 00 2c 56 fc 04 40 00 08:25:00.812 WRITE FPDMA QUEUED
|
||||
60 00 02 00 00 00 00 15 08 36 15 40 00 08:25:00.812 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log (GP Log 0x07) not supported
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 17365 -
|
||||
# 2 Short offline Completed without error 00% 17335 -
|
||||
# 3 Short offline Completed without error 00% 17313 -
|
||||
# 4 Short offline Completed without error 00% 17277 -
|
||||
# 5 Short offline Completed without error 00% 17197 -
|
||||
# 6 Short offline Completed without error 00% 17175 -
|
||||
# 7 Short offline Completed without error 00% 17147 -
|
||||
# 8 Short offline Completed without error 00% 17076 -
|
||||
# 9 Short offline Completed without error 00% 17062 -
|
||||
#10 Short offline Completed without error 00% 17046 -
|
||||
#11 Short offline Completed without error 00% 17031 -
|
||||
#12 Short offline Completed without error 00% 16923 -
|
||||
#13 Short offline Completed without error 00% 16760 -
|
||||
#14 Short offline Completed without error 00% 16740 -
|
||||
#15 Short offline Completed without error 00% 16722 -
|
||||
#16 Short offline Completed without error 00% 16297 -
|
||||
#17 Extended offline Completed without error 00% 16235 -
|
||||
#18 Short offline Completed without error 00% 15609 -
|
||||
#19 Short offline Completed without error 00% 15592 -
|
||||
#20 Short offline Completed without error 00% 15551 -
|
||||
#21 Short offline Completed without error 00% 15538 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Completed [00% left] (0-65535)
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 256 (0x0100)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 24 Celsius
|
||||
Power Cycle Min/Max Temperature: 21/25 Celsius
|
||||
Lifetime Min/Max Temperature: 14/56 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 15/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (113)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 1 (0.1 seconds)
|
||||
Write: 1 (0.1 seconds)
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0008 2 0 Device-to-host non-data FIS retries
|
||||
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
0x8001 2 0 Vendor specific
|
||||
|
||||
Reference in New Issue
Block a user