mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
284
HDD/Seagate/ST3802/ST380215A/E1B4FFFE51F1
Normal file
284
HDD/Seagate/ST3802/ST380215A/E1B4FFFE51F1
Normal file
@@ -0,0 +1,284 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Barracuda 7200.10
|
||||
Device Model: ST380215A
|
||||
Serial Number: --
|
||||
Firmware Version: 3.AAC
|
||||
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
||||
Local Time is: Mon May 6 14:17:58 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x82) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Enabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 430) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 27) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 133763843
|
||||
3 Spin_Up_Time PO---- 097 097 000 - 0
|
||||
4 Start_Stop_Count -O--CK 096 096 020 - 4500
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 084 060 030 - 291594744
|
||||
9 Power_On_Hours -O--CK 086 086 000 - 12544
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 096 096 020 - 4702
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 072 052 045 - 28 (Min/Max 17/28)
|
||||
194 Temperature_Celsius -O---K 028 048 000 - 28 (0 12 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 087 073 000 - 163992074
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
|
||||
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x20 GPL,SL R/O 1 Streaming performance log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x23 GPL,SL R/O 1 Delayed sector log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 1 Device vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL,SL VS 101 Device vendor specific log
|
||||
0xa8 GPL,SL VS 20 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
0xff GPL - 23552 Reserved
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 62 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 62 [1] occurred at disk power-on lifetime: 3605 hours (150 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f f0 00 00:02:53.981 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 f0 00 00:02:53.981 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ff 00 00:02:53.981 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 f0 00 00:02:53.687 RECALIBRATE [OBS-4]
|
||||
00 00 00 00 01 00 00 00 00 00 3f 00 00 00:02:53.214 NOP [Abort queued commands]
|
||||
|
||||
Error 61 [0] occurred at disk power-on lifetime: 3605 hours (150 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f f0 00 00:02:53.981 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 f0 00 00:02:53.981 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ff 00 00:02:53.981 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 f0 00 00:02:53.687 RECALIBRATE [OBS-4]
|
||||
00 00 00 00 01 00 00 00 00 00 3f 00 00 00:02:53.214 NOP [Abort queued commands]
|
||||
|
||||
Error 60 [19] occurred at disk power-on lifetime: 3604 hours (150 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f e0 00 00:00:53.198 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 e0 00 00:00:53.198 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ef 00 00:00:53.198 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 e0 00 00:00:53.198 RECALIBRATE [OBS-4]
|
||||
00 00 00 00 01 00 00 00 00 00 3f 00 00 00:00:52.906 NOP [Abort queued commands]
|
||||
|
||||
Error 59 [18] occurred at disk power-on lifetime: 3604 hours (150 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f e0 00 00:00:53.198 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:53.198 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 e0 00 00:00:53.198 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ef 00 00:00:53.198 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 e0 00 00:00:52.906 RECALIBRATE [OBS-4]
|
||||
|
||||
Error 58 [17] occurred at disk power-on lifetime: 3605 hours (150 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f f0 00 00:02:53.981 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 f0 00 00:02:53.981 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ff 00 00:02:53.981 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 f0 00 00:02:53.687 RECALIBRATE [OBS-4]
|
||||
00 00 00 00 01 00 00 00 00 00 3f 00 00 00:02:53.214 NOP [Abort queued commands]
|
||||
|
||||
Error 57 [16] occurred at disk power-on lifetime: 3605 hours (150 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f f0 00 00:02:53.981 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 f0 00 00:02:53.981 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ff 00 00:02:53.981 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 f0 00 00:02:53.687 RECALIBRATE [OBS-4]
|
||||
00 00 00 00 01 00 00 00 00 00 3f 00 00 00:02:53.214 NOP [Abort queued commands]
|
||||
|
||||
Error 56 [15] occurred at disk power-on lifetime: 3604 hours (150 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f e0 00 00:00:53.198 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 e0 00 00:00:53.198 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ef 00 00:00:53.198 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 e0 00 00:00:53.198 RECALIBRATE [OBS-4]
|
||||
00 00 00 00 01 00 00 00 00 00 3f 00 00 00:00:52.906 NOP [Abort queued commands]
|
||||
|
||||
Error 55 [14] occurred at disk power-on lifetime: 3604 hours (150 days + 4 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 00 00 00 3f e0 00 00:00:53.198 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:53.198 READ DMA EXT
|
||||
c6 00 00 00 10 00 00 00 00 00 00 e0 00 00:00:53.198 SET MULTIPLE MODE
|
||||
91 00 00 00 3f 00 0f 00 00 00 00 ef 00 00:00:53.198 INITIALIZE DEVICE PARAMETERS [OBS-6]
|
||||
10 00 00 01 00 00 00 00 00 00 00 e0 00 00:00:52.906 RECALIBRATE [OBS-4]
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 12504 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11) not supported
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user