mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
320
HDD/Seagate/ST9500/ST9500420AS/07AF9E010E69
Normal file
320
HDD/Seagate/ST9500/ST9500420AS/07AF9E010E69
Normal file
@@ -0,0 +1,320 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 7200.4
|
||||
Device Model: ST9500420AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: 0001BSM2
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 1.5 Gb/s
|
||||
Local Time is: Mon Aug 7 13:17:24 2023 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x73) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 106) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x103b) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 119 089 006 - 214999615
|
||||
3 Spin_Up_Time PO---- 095 094 000 - 0
|
||||
4 Start_Stop_Count -O--CK 082 082 020 - 18688
|
||||
5 Reallocated_Sector_Ct PO--CK 098 098 036 - 45
|
||||
7 Seek_Error_Rate POSR-- 081 060 030 - 167462384
|
||||
9 Power_On_Hours -O--CK 078 078 000 - 19305
|
||||
10 Spin_Retry_Count PO--C- 100 099 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 097 097 020 - 3817
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 770
|
||||
188 Command_Timeout -O--CK 100 099 000 - 17180131336
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 053 049 045 - 47 (Min/Max 40/50)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 78
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 0
|
||||
193 Load_Cycle_Count -O--CK 001 001 000 - 522849
|
||||
194 Temperature_Celsius -O---K 047 051 000 - 47 (0 9 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 044 031 000 - 214999615
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 65 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2864 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xc0 GPL,SL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 742 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 742 [1] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:42.594 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:42.548 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:39.914 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:39.817 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:37.211 READ FPDMA QUEUED
|
||||
|
||||
Error 741 [0] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:37.211 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:37.210 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:34.591 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:34.545 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:31.911 READ FPDMA QUEUED
|
||||
|
||||
Error 740 [19] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:34.591 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:34.545 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:31.911 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:31.814 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:29.201 READ FPDMA QUEUED
|
||||
|
||||
Error 739 [18] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:29.201 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:29.199 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:29.198 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:26.564 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:26.562 READ FPDMA QUEUED
|
||||
|
||||
Error 738 [17] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:26.564 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:26.562 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:26.517 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:23.900 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:23.899 READ FPDMA QUEUED
|
||||
|
||||
Error 737 [16] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:18.593 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:18.592 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:18.555 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:15.928 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:15.928 READ FPDMA QUEUED
|
||||
|
||||
Error 736 [15] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:15.928 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:15.928 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:15.927 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:15.881 READ LOG EXT
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:13.248 READ FPDMA QUEUED
|
||||
|
||||
Error 735 [14] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 10 00 00 b4 00 00 Error: UNC at LBA = 0x100000b4 = 268435636
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:07.931 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:07.931 READ FPDMA QUEUED
|
||||
60 00 00 00 e0 00 00 10 00 00 20 40 00 00:05:07.929 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:05:07.919 READ LOG EXT
|
||||
60 00 00 00 e0 00 3a 56 00 38 20 40 00 00:05:05.110 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 11938 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 47 Celsius
|
||||
Power Cycle Min/Max Temperature: 40/50 Celsius
|
||||
Lifetime Min/Max Temperature: 9/51 Celsius
|
||||
Under/Over Temperature Limit Count: 0/54875
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/ 0 Celsius
|
||||
Min/Max Temperature Limit: 0/ 0 Celsius
|
||||
Temperature History Size (Index): 128 (94)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
173
HDD/Seagate/ST9500/ST9500420AS/2FD2AC9D24E7
Normal file
173
HDD/Seagate/ST9500/ST9500420AS/2FD2AC9D24E7
Normal file
@@ -0,0 +1,173 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 7200.4
|
||||
Device Model: ST9500420AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: 0006HPM1
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Mon Apr 8 23:52:26 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x53) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 107) minutes.
|
||||
SCT capabilities: (0x103f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 114 099 006 - 77635241
|
||||
3 Spin_Up_Time -O---- 100 097 000 - 0
|
||||
4 Start_Stop_Count PO--CK 097 097 000 - 3632
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 075 060 030 - 34643094327
|
||||
9 Power_On_Hours -O--CK 071 071 000 - 26081
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count PO--CK 099 037 020 - 1630
|
||||
183 Runtime_Bad_Block -O--CK 100 253 000 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 097 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 096 000 - 4295032840
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 058 050 045 - 42 (Min/Max 35/42)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 94
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 78
|
||||
193 Load_Cycle_Count -O--CK 001 001 000 - 282009
|
||||
194 Temperature_Celsius -O---K 042 050 000 - 42 (0 14 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 045 039 000 - 77635241
|
||||
196 Reallocated_Event_Count PO--CK 100 100 036 - 0
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 65 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2864 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3 -
|
||||
# 2 Short offline Completed without error 00% 2 -
|
||||
# 3 Short offline Completed without error 00% 2 -
|
||||
# 4 Short offline Completed without error 00% 1 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 42 Celsius
|
||||
Power Cycle Min/Max Temperature: 35/42 Celsius
|
||||
Lifetime Min/Max Temperature: 14/50 Celsius
|
||||
Under/Over Temperature Limit Count: 0/16
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/ 0 Celsius
|
||||
Min/Max Temperature Limit: 0/ 0 Celsius
|
||||
Temperature History Size (Index): 128 (41)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
205
HDD/Seagate/ST9500/ST9500420AS/4276A3B6A4B3
Normal file
205
HDD/Seagate/ST9500/ST9500420AS/4276A3B6A4B3
Normal file
@@ -0,0 +1,205 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 7200.4
|
||||
Device Model: ST9500420AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: 0003LVM1
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s)
|
||||
Local Time is: Mon May 27 10:13:07 2024 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x73) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 108) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x103b) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x000f 117 083 034 Pre-fail Always - 129161294
|
||||
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
|
||||
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1290
|
||||
5 Reallocated_Sector_Ct 0x0033 091 091 036 Pre-fail Always - 189
|
||||
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 26478484901
|
||||
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 23813 (142 35 0)
|
||||
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
||||
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1290
|
||||
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 6436
|
||||
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 30
|
||||
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
||||
190 Airflow_Temperature_Cel 0x0022 074 049 045 Old_age Always - 26 (Min/Max 20/26)
|
||||
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 313
|
||||
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1
|
||||
193 Load_Cycle_Count 0x0032 042 042 000 Old_age Always - 117282
|
||||
194 Temperature_Celsius 0x0022 026 051 000 Old_age Always - 26 (0 3 0 0 0)
|
||||
195 Hardware_ECC_Recovered 0x001a 050 041 000 Old_age Always - 129161294
|
||||
196 Reallocated_Event_Count 0x000f 074 074 030 Pre-fail Always - 23128 (27198 0)
|
||||
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
||||
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 6434 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 6434 occurred at disk power-on lifetime: 22772 hours (948 days + 20 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 a0 30 07 Error: UNC at LBA = 0x0730a073 = 120627315
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
25 00 3f 61 a0 30 e7 00 2d+03:12:11.794 READ DMA EXT
|
||||
35 00 3f 22 a0 30 e7 00 2d+03:12:11.792 WRITE DMA EXT
|
||||
25 00 3f 22 a0 30 e7 00 2d+03:12:11.791 READ DMA EXT
|
||||
35 00 3f 22 a0 30 e7 00 2d+03:12:11.791 WRITE DMA EXT
|
||||
25 00 3f 22 a0 30 e7 00 2d+03:12:11.790 READ DMA EXT
|
||||
|
||||
Error 6433 occurred at disk power-on lifetime: 21047 hours (876 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 da 63 c0 08 Error: UNC at LBA = 0x08c063da = 146826202
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 00 00 a0 63 c0 48 00 2d+14:14:00.080 READ FPDMA QUEUED
|
||||
ef 90 03 00 00 00 00 00 2d+14:14:00.079 SET FEATURES [Disable SATA feature]
|
||||
ef 02 00 00 00 00 00 00 2d+14:14:00.071 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 00 00 00 ff 2d+14:13:59.994 NOP [Abort queued commands]
|
||||
60 00 00 a0 63 c0 48 00 2d+14:13:57.428 READ FPDMA QUEUED
|
||||
|
||||
Error 6432 occurred at disk power-on lifetime: 21047 hours (876 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 da 63 c0 08 Error: UNC at LBA = 0x08c063da = 146826202
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 00 00 a0 63 c0 48 00 2d+14:13:57.428 READ FPDMA QUEUED
|
||||
60 00 00 a0 64 c0 48 00 2d+14:13:57.426 READ FPDMA QUEUED
|
||||
ef 90 03 00 00 00 00 00 2d+14:13:57.426 SET FEATURES [Disable SATA feature]
|
||||
ef 02 00 00 00 00 00 00 2d+14:13:57.419 SET FEATURES [Enable write cache]
|
||||
00 00 00 00 00 00 00 ff 2d+14:13:57.379 NOP [Abort queued commands]
|
||||
|
||||
Error 6431 occurred at disk power-on lifetime: 21047 hours (876 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 da 63 c0 08 Error: UNC at LBA = 0x08c063da = 146826202
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 00 00 a0 5e c0 48 00 2d+14:13:54.770 READ FPDMA QUEUED
|
||||
60 00 00 a0 5d c0 48 00 2d+14:13:54.769 READ FPDMA QUEUED
|
||||
60 00 00 a0 58 c0 48 00 2d+14:13:54.662 READ FPDMA QUEUED
|
||||
60 00 00 a0 57 c0 48 00 2d+14:13:54.662 READ FPDMA QUEUED
|
||||
60 00 00 a0 68 bb 48 00 2d+14:13:52.960 READ FPDMA QUEUED
|
||||
|
||||
Error 6430 occurred at disk power-on lifetime: 19645 hours (818 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 51 00 73 a0 30 07 Error: UNC at LBA = 0x0730a073 = 120627315
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 00 00 40 a1 30 47 00 2d+01:18:42.600 READ FPDMA QUEUED
|
||||
60 00 00 40 a0 30 47 00 2d+01:18:42.600 READ FPDMA QUEUED
|
||||
60 00 00 ff ff ff 4f 00 2d+01:18:42.598 READ FPDMA QUEUED
|
||||
60 00 00 ff ff ff 4f 00 2d+01:18:42.598 READ FPDMA QUEUED
|
||||
61 00 00 28 9f 30 47 00 2d+01:18:42.597 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Vendor (0x50) Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
The above only provides legacy SMART information - try 'smartctl -x' for more
|
||||
|
||||
|
||||
|
||||
322
HDD/Seagate/ST9500/ST9500420AS/5AA6A4275FE6
Normal file
322
HDD/Seagate/ST9500/ST9500420AS/5AA6A4275FE6
Normal file
@@ -0,0 +1,322 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 7200.4
|
||||
Device Model: ST9500420AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: 0006HPM1
|
||||
User Capacity: 500,106,780,160 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Sun May 19 04:25:28 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x53) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 106) minutes.
|
||||
SCT capabilities: (0x103f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 113 066 006 - 50422774
|
||||
3 Spin_Up_Time PO---- 100 097 085 - 0
|
||||
4 Start_Stop_Count -O--CK 097 097 020 - 3332
|
||||
5 Reallocated_Sector_Ct PO--CK 092 092 036 - 171
|
||||
7 Seek_Error_Rate POSR-- 056 051 030 - 700153459624
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 4332
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 097 037 020 - 3242
|
||||
183 Runtime_Bad_Block ------ 100 253 000 - 96
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 001 001 000 - 65535
|
||||
188 Command_Timeout -O--CK 100 099 000 - 4295032842
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 070 037 045 Past 30 (0 50 31 29 0)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 53
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 54
|
||||
193 Load_Cycle_Count -O--CK 082 082 000 - 36358
|
||||
194 Temperature_Celsius -O---K 030 063 000 - 30 (0 9 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 043 038 000 - 50422774
|
||||
196 Reallocated_Event_Count ------ 092 092 000 - 171
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 18
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 65 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2864 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 55020 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 55020 [19] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a5 c5 39 00 00 Error: UNC at LBA = 0x07a5c539 = 128304441
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:21:35.729 READ DMA EXT
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:21:34.739 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:21:34.729 NOP [Abort queued commands]
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:21:14.727 READ DMA EXT
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:21:13.738 NOP [Abort queued commands]
|
||||
|
||||
Error 55019 [18] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a5 c5 39 00 00 Error: UNC at LBA = 0x07a5c539 = 128304441
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:21:14.727 READ DMA EXT
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:21:13.738 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:21:13.727 NOP [Abort queued commands]
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:20:53.727 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 88 e0 00 3d+06:20:53.010 WRITE DMA EXT
|
||||
|
||||
Error 55018 [17] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a5 c5 39 00 00 Error: UNC at LBA = 0x07a5c539 = 128304441
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:20:53.727 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 88 e0 00 3d+06:20:53.010 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 98 e0 00 3d+06:20:52.779 WRITE DMA EXT
|
||||
35 00 00 00 10 00 00 00 60 7f 80 e0 00 3d+06:20:52.778 WRITE DMA EXT
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:20:52.736 NOP [Abort queued commands]
|
||||
|
||||
Error 55017 [16] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a5 c5 39 00 00 Error: UNC at LBA = 0x07a5c539 = 128304441
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:20:32.726 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 67 0f d0 e0 00 3d+06:20:32.080 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 62 bb f8 e0 00 3d+06:20:32.078 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 80 e0 00 3d+06:20:32.054 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 90 e0 00 3d+06:20:32.054 WRITE DMA EXT
|
||||
|
||||
Error 55016 [15] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a5 c5 39 00 00 Error: UNC at LBA = 0x07a5c539 = 128304441
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 04 00 00 00 07 a5 c1 b8 e0 00 3d+06:20:11.724 READ DMA EXT
|
||||
35 00 00 04 00 00 00 04 40 38 f8 e0 00 3d+06:20:11.719 WRITE DMA EXT
|
||||
35 00 00 04 00 00 00 04 40 34 f8 e0 00 3d+06:20:11.714 WRITE DMA EXT
|
||||
25 00 00 04 00 00 00 04 41 80 78 e0 00 3d+06:20:11.710 READ DMA EXT
|
||||
25 00 00 04 00 00 00 04 41 7c 78 e0 00 3d+06:20:11.705 READ DMA EXT
|
||||
|
||||
Error 55015 [14] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a6 50 e6 00 00 Error: UNC at LBA = 0x07a650e6 = 128340198
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 03 00 00 00 07 a6 50 38 e0 00 3d+06:19:51.222 READ DMA EXT
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:19:50.232 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 ff 3d+06:19:50.222 NOP [Abort queued commands]
|
||||
25 00 00 03 00 00 00 07 a6 50 38 e0 00 3d+06:19:30.222 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 88 e0 00 3d+06:19:29.733 WRITE DMA EXT
|
||||
|
||||
Error 55014 [13] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a6 50 e6 00 00 Error: UNC at LBA = 0x07a650e6 = 128340198
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 03 00 00 00 07 a6 50 38 e0 00 3d+06:19:30.222 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 88 e0 00 3d+06:19:29.733 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 90 e0 00 3d+06:19:29.733 WRITE DMA EXT
|
||||
35 00 00 00 10 00 00 00 60 7f 60 e0 00 3d+06:19:29.732 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 64 38 88 e0 00 3d+06:19:29.274 WRITE DMA EXT
|
||||
|
||||
Error 55013 [12] occurred at disk power-on lifetime: 3837 hours (159 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 07 a6 50 e6 00 00 Error: UNC at LBA = 0x07a650e6 = 128340198
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 03 00 00 00 07 a6 50 38 e0 00 3d+06:19:09.221 READ DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 80 e0 00 3d+06:19:09.150 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 5e b3 98 e0 00 3d+06:19:09.148 WRITE DMA EXT
|
||||
35 00 00 00 60 00 00 00 60 7f 00 e0 00 3d+06:19:09.146 WRITE DMA EXT
|
||||
35 00 00 00 08 00 00 00 62 bb 50 e0 00 3d+06:19:09.143 WRITE DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1945 -
|
||||
# 2 Short offline Completed without error 00% 1945 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: 29/31 Celsius
|
||||
Lifetime Min/Max Temperature: 9/64 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 14/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (100)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
175
HDD/Seagate/ST9500/ST9500420AS/5C372118838A
Normal file
175
HDD/Seagate/ST9500/ST9500420AS/5C372118838A
Normal file
@@ -0,0 +1,175 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Momentus 7200.4
|
||||
Device Model: ST9500420AS
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000c50 ...
|
||||
Firmware Version: 0003SDM1
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s
|
||||
Local Time is: Thu Nov 9 16:11:05 2023 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Disabled
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
See vendor-specific Attribute list for marginal Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x73) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 108) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 3) minutes.
|
||||
SCT capabilities: (0x103f) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 10
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 114 099 006 - 61546426
|
||||
3 Spin_Up_Time PO---- 100 097 085 - 0
|
||||
4 Start_Stop_Count -O--CK 099 099 020 - 1693
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
||||
7 Seek_Error_Rate POSR-- 075 060 030 - 30650786
|
||||
9 Power_On_Hours -O--CK 099 099 000 - 1308
|
||||
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
||||
12 Power_Cycle_Count -O--CK 099 099 020 - 1443
|
||||
184 End-to-End_Error -O--CK 100 100 099 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 097 000 - 16
|
||||
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 060 045 045 Past 40 (Min/Max 28/42)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 67
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 163
|
||||
193 Load_Cycle_Count -O--CK 088 088 000 - 24912
|
||||
194 Temperature_Celsius -O---K 040 055 000 - 40 (0 7 0 0 0)
|
||||
195 Hardware_ECC_Recovered -O-RC- 047 042 000 - 61546426
|
||||
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
||||
240 Head_Flying_Hours ------ 100 253 000 - 703 (4 153 0)
|
||||
241 Total_LBAs_Written ------ 100 253 000 - 1462903977
|
||||
242 Total_LBAs_Read ------ 100 253 000 - 4244061737
|
||||
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x21 GPL,SL R/O 1 Write stream error log
|
||||
0x22 GPL,SL R/O 1 Read stream error log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa1 GPL,SL VS 20 Device vendor specific log
|
||||
0xa2 GPL VS 2248 Device vendor specific log
|
||||
0xa8 GPL,SL VS 65 Device vendor specific log
|
||||
0xa9 GPL,SL VS 1 Device vendor specific log
|
||||
0xb0 GPL VS 2864 Device vendor specific log
|
||||
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 522 (0x020a)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 28/42 Celsius
|
||||
Lifetime Min/Max Temperature: 7/56 Celsius
|
||||
Specified Max Operating Temperature: 38 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 14/55 Celsius
|
||||
Min/Max Temperature Limit: 10/60 Celsius
|
||||
Temperature History Size (Index): 128 (77)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user