mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
330
HDD/Toshiba/MK5061/MK5061GSYN/7F141BAA75B8
Normal file
330
HDD/Toshiba/MK5061/MK5061GSYN/7F141BAA75B8
Normal file
@@ -0,0 +1,330 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba 2.5" HDD MK..61GSY[N]
|
||||
Device Model: TOSHIBA MK5061GSYN
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000039 ...
|
||||
Firmware Version: MH001M
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Sep 4 03:40:09 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 128) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 2335
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 3170
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 724
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Minutes -O--CK 087 087 000 - 87h+21m
|
||||
10 Spin_Retry_Count PO--CK 163 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 3169
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 110
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 279773271
|
||||
193 Load_Cycle_Count -O--CK 095 095 000 - 54268
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 4/51)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 359
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 286
|
||||
198 Offline_Uncorrectable ----CK 001 001 000 - 255
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
|
||||
220 Disk_Shift -O---- 100 100 000 - 8258
|
||||
222 Loaded_Hours -O--CK 090 090 000 - 4186
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 353
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 9510 (device log contains only the most recent 256 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 9510 [37] occurred at disk power-on lifetime: 4832 hours (201 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 12 00 00 02 33 5a 0b 62 00 Error: UNC at LBA = 0x02335a0b = 36919819
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 10 00 00 02 33 5a 08 40 00 03:58:27.628 READ FPDMA QUEUED
|
||||
61 00 08 00 08 00 00 09 40 08 08 40 00 03:58:27.628 WRITE FPDMA QUEUED
|
||||
61 00 08 00 00 00 00 08 40 08 08 40 00 03:58:27.628 WRITE FPDMA QUEUED
|
||||
61 00 10 00 f0 00 00 00 00 08 48 40 00 03:58:27.628 WRITE FPDMA QUEUED
|
||||
61 00 10 00 e8 00 00 1d 05 7d d8 40 00 03:58:27.628 WRITE FPDMA QUEUED
|
||||
|
||||
Error 9509 [36] occurred at disk power-on lifetime: 4832 hours (201 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 62 00 00 02 33 5a 0b 62 00 Error: UNC at LBA = 0x02335a0b = 36919819
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 60 00 00 02 33 5a 08 40 00 03:58:24.065 READ FPDMA QUEUED
|
||||
60 00 08 00 58 00 00 02 33 5a 00 40 00 03:58:23.957 READ FPDMA QUEUED
|
||||
60 00 08 00 50 00 00 02 33 59 f8 40 00 03:58:23.925 READ FPDMA QUEUED
|
||||
60 00 08 00 48 00 00 02 33 59 f0 40 00 03:58:23.924 READ FPDMA QUEUED
|
||||
60 00 08 00 40 00 00 02 33 59 e8 40 00 03:58:23.882 READ FPDMA QUEUED
|
||||
|
||||
Error 9508 [35] occurred at disk power-on lifetime: 4832 hours (201 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 d2 00 00 02 33 5a 09 62 00 Error: UNC at LBA = 0x02335a09 = 36919817
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 07 00 00 d8 00 00 02 33 5b 00 40 00 03:58:20.377 READ FPDMA QUEUED
|
||||
60 04 c0 00 d0 00 00 02 33 56 40 40 00 03:58:20.369 READ FPDMA QUEUED
|
||||
60 05 40 00 c8 00 00 02 33 51 00 40 00 03:58:20.369 READ FPDMA QUEUED
|
||||
60 00 b0 00 c0 00 00 02 33 50 50 40 00 03:58:20.363 READ FPDMA QUEUED
|
||||
60 05 50 00 b8 00 00 02 33 4b 00 40 00 03:58:20.363 READ FPDMA QUEUED
|
||||
|
||||
Error 9507 [34] occurred at disk power-on lifetime: 4832 hours (201 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 d2 00 00 02 33 5a 09 62 00 Error: UNC at LBA = 0x02335a09 = 36919817
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 d0 00 00 02 33 5a 08 40 00 03:53:37.428 READ FPDMA QUEUED
|
||||
ef 10 10 02 03 00 00 00 00 00 00 a0 00 03:53:37.427 SET FEATURES [Enable SATA feature]
|
||||
ef 00 10 00 02 38 60 2f 00 00 00 a0 00 03:53:37.427 SET FEATURES [Enable SATA feature]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 03:53:37.427 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 03 00 45 00 00 00 00 00 00 00 a0 00 03:53:37.426 IDENTIFY DEVICE
|
||||
|
||||
Error 9506 [33] occurred at disk power-on lifetime: 4832 hours (201 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 5a 00 00 02 33 5a 0b 62 00 Error: UNC at LBA = 0x02335a0b = 36919819
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 58 00 00 02 33 5a 08 40 00 03:53:34.077 READ FPDMA QUEUED
|
||||
60 00 08 00 78 00 00 02 33 5a 00 40 00 03:53:33.928 READ FPDMA QUEUED
|
||||
60 00 08 00 70 00 00 02 33 59 f8 40 00 03:53:33.895 READ FPDMA QUEUED
|
||||
60 00 08 00 68 00 00 02 33 59 f0 40 00 03:53:33.895 READ FPDMA QUEUED
|
||||
60 00 08 00 60 00 00 02 33 59 e8 40 00 03:53:33.852 READ FPDMA QUEUED
|
||||
|
||||
Error 9505 [32] occurred at disk power-on lifetime: 4832 hours (201 days + 8 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 fa 00 00 02 33 5a 0b 62 00 Error: UNC at LBA = 0x02335a0b = 36919819
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 0a 00 00 f8 00 00 02 33 51 00 40 00 03:53:30.132 READ FPDMA QUEUED
|
||||
60 06 00 00 b8 00 00 02 33 4b 00 40 00 03:53:30.126 READ FPDMA QUEUED
|
||||
60 03 00 00 b0 00 00 02 33 48 00 40 00 03:53:30.122 READ FPDMA QUEUED
|
||||
60 06 00 00 a8 00 00 02 33 42 00 40 00 03:53:30.115 READ FPDMA QUEUED
|
||||
60 00 f0 00 a0 00 00 02 33 41 10 40 00 03:53:30.102 READ FPDMA QUEUED
|
||||
|
||||
Error 9504 [31] occurred at disk power-on lifetime: 4829 hours (201 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 6a 00 00 02 33 5a 0b 62 00 Error: UNC at LBA = 0x02335a0b = 36919819
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 68 00 00 02 33 5a 08 40 00 00:43:04.477 READ FPDMA QUEUED
|
||||
ef 10 10 02 03 00 00 00 00 00 00 a0 00 00:43:04.477 SET FEATURES [Enable SATA feature]
|
||||
ef 00 10 00 02 38 60 2f 00 00 00 a0 00 00:43:04.477 SET FEATURES [Enable SATA feature]
|
||||
27 00 00 00 00 00 00 00 00 00 00 e0 00 00:43:04.477 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
||||
ec 03 00 45 00 00 00 00 00 00 00 a0 00 00:43:04.476 IDENTIFY DEVICE
|
||||
|
||||
Error 9503 [30] occurred at disk power-on lifetime: 4829 hours (201 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 7a 00 00 02 33 5a 08 62 00 Error: UNC at LBA = 0x02335a08 = 36919816
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 78 00 00 02 33 5a 08 40 00 00:43:01.179 READ FPDMA QUEUED
|
||||
60 00 08 00 70 00 00 02 33 5a 00 40 00 00:43:01.072 READ FPDMA QUEUED
|
||||
60 00 08 00 68 00 00 02 33 59 f8 40 00 00:43:01.039 READ FPDMA QUEUED
|
||||
60 00 08 00 60 00 00 02 33 59 f0 40 00 00:43:01.038 READ FPDMA QUEUED
|
||||
60 00 08 00 58 00 00 02 33 59 e8 40 00 00:43:00.947 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 5218 -
|
||||
# 2 Short offline Completed: read failure 00% 4943 78838812
|
||||
# 3 Short offline Completed: read failure 00% 4935 78838812
|
||||
# 4 Short offline Completed without error 00% 4922 -
|
||||
# 5 Short offline Completed without error 00% 4907 -
|
||||
# 6 Extended offline Completed: read failure 00% 4901 1528289
|
||||
# 7 Short offline Completed without error 00% 4883 -
|
||||
# 8 Short offline Completed: read failure 00% 4879 5756858
|
||||
# 9 Short offline Aborted by host 70% 4870 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 39/41 Celsius
|
||||
Lifetime Min/Max Temperature: 4/51 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: 5/55 Celsius
|
||||
Temperature History Size (Index): 478 (186)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
183
HDD/Toshiba/MK5061/MK5061GSYN/BF24C159D770
Normal file
183
HDD/Toshiba/MK5061/MK5061GSYN/BF24C159D770
Normal file
@@ -0,0 +1,183 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba 2.5" HDD MK..61GSY[N]
|
||||
Device Model: TOSHIBA MK5061GSYN
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 000039 ...
|
||||
Firmware Version: MH001M
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: 7200 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Sep 4 03:40:07 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 128 (minimum power consumption without standby)
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 122) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 2270
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 5581
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Minutes -O--CK 089 089 000 - 75h+50m
|
||||
10 Spin_Retry_Count PO--CK 211 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 3171
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 4
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 12910655
|
||||
193 Load_Cycle_Count -O--CK 096 096 000 - 45597
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 44 (Min/Max 3/51)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
220 Disk_Shift -O---- 100 100 000 - 8346
|
||||
222 Loaded_Hours -O--CK 099 099 000 - 428
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 410
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 51 Comprehensive SMART error log
|
||||
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 4527 -
|
||||
# 2 Short offline Completed without error 00% 4251 -
|
||||
# 3 Short offline Completed without error 00% 4244 -
|
||||
# 4 Short offline Completed without error 00% 4230 -
|
||||
# 5 Short offline Completed without error 00% 4216 -
|
||||
# 6 Short offline Completed without error 00% 4209 -
|
||||
# 7 Extended offline Completed without error 00% 4208 -
|
||||
# 8 Short offline Completed without error 00% 4191 -
|
||||
# 9 Short offline Completed without error 00% 4188 -
|
||||
#10 Short offline Aborted by host 70% 4177 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 44 Celsius
|
||||
Power Cycle Min/Max Temperature: 43/44 Celsius
|
||||
Lifetime Min/Max Temperature: 3/51 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: 5/55 Celsius
|
||||
Temperature History Size (Index): 478 (107)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
Write: Disabled
|
||||
|
||||
Device Statistics (GP/SMART Log 0x04) not supported
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0002 4 0 R_ERR response for data FIS
|
||||
0x0003 4 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 4 0 R_ERR response for host-to-device data FIS
|
||||
0x0005 4 0 R_ERR response for non-data FIS
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user