Update of reports (new: 6895, modified: 16)

2025-05-31 16:21:41 +05:30 · 2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions
--- a/HDD/WDC/WD3201/WD3201ABYS-01B9A0/9F9A0EDA4E81
+++ b/HDD/WDC/WD3201/WD3201ABYS-01B9A0/9F9A0EDA4E81
@@ -0,0 +1,110 @@
+smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.3 amd64] (local build)
+Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
+
+=== START OF INFORMATION SECTION ===
+Model Family:     Western Digital RE2 Serial ATA
+Device Model:     WDC WD3201ABYS-01B9A0
+Serial Number:    --
+LU WWN Device Id: 5 0014ee ...
+Firmware Version: 13.01C02
+User Capacity:    320,072,933,376 bytes [320 GB]
+Sector Size:      512 bytes logical/physical
+Rotation Rate:    7200 rpm
+Device is:        In smartctl database 7.3/5319
+ATA Version is:   ATA8-ACS (minor revision not indicated)
+SATA Version is:  SATA 2.5, 3.0 Gb/s
+Local Time is:    Fri Aug 25 23:22:47 2023 MSK
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+
+=== START OF READ SMART DATA SECTION ===
+SMART Status not supported: Incomplete response, ATA output registers missing
+SMART overall-health self-assessment test result: PASSED
+Warning: This result is based on an Attribute check.
+
+General SMART Values:
+Offline data collection status:  (0x84)	Offline data collection activity
+					was suspended by an interrupting command from host.
+					Auto Offline Data Collection: Enabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever 
+					been run.
+Total time to complete Offline 
+data collection: 		( 8760) seconds.
+Offline data collection
+capabilities: 			 (0x7b) SMART execute Offline immediate.
+					Auto Offline data collection on/off support.
+					Suspend Offline collection upon new
+					command.
+					Offline surface scan supported.
+					Self-test supported.
+					Conveyance Self-test supported.
+					Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					General Purpose Logging supported.
+Short self-test routine 
+recommended polling time: 	 (   2) minutes.
+Extended self-test routine
+recommended polling time: 	 ( 104) minutes.
+Conveyance self-test routine
+recommended polling time: 	 (   5) minutes.
+SCT capabilities: 	       (0x303f)	SCT Status supported.
+					SCT Error Recovery Control supported.
+					SCT Feature Control supported.
+					SCT Data Table supported.
+
+SMART Attributes Data Structure revision number: 16
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
+  3 Spin_Up_Time            0x0003   155   151   021    Pre-fail  Always       -       5233
+  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       161
+  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
+  7 Seek_Error_Rate         0x000e   200   192   000    Old_age   Always       -       0
+  9 Power_On_Hours          0x0032   049   049   000    Old_age   Always       -       37300
+ 10 Spin_Retry_Count        0x0012   100   100   000    Old_age   Always       -       0
+ 11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       0
+ 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       161
+192 Power-Off_Retract_Count 0x0032   166   166   000    Old_age   Always       -       26068
+193 Load_Cycle_Count        0x0032   192   192   000    Old_age   Always       -       26078
+194 Temperature_Celsius     0x0022   120   089   000    Old_age   Always       -       27
+196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
+197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
+198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
+199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
+200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
+
+SMART Error Log Version: 1
+ATA Error Count: 1
+	CR = Command Register [HEX]
+	FR = Features Register [HEX]
+	SC = Sector Count Register [HEX]
+	SN = Sector Number Register [HEX]
+	CL = Cylinder Low Register [HEX]
+	CH = Cylinder High Register [HEX]
+	DH = Device/Head Register [HEX]
+	DC = Device Command Register [HEX]
+	ER = Error register [HEX]
+	ST = Status register [HEX]
+Powered_Up_Time is measured from power on, and printed as
+DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
+SS=sec, and sss=millisec. It "wraps" after 49.710 days.
+
+SMART Self-test log structure revision number 1
+Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
+# 1  Short offline       Completed without error       00%     24781         -
+
+SMART Selective self-test log data structure revision number 1
+ SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+    1        0        0  Not_testing
+    2        0        0  Not_testing
+    3        0        0  Not_testing
+    4        0        0  Not_testing
+    5        0        0  Not_testing
+Selective self-test flags (0x0):
+  After scanning selected spans, do NOT read-scan remainder of disk.
+If Selective self-test is pending on power-up, resume after 0 minute delay.
+