80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 6895, modified: 16)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions
Download Patch File Download Diff File Expand all files Collapse all files

320
HDD/WDC/WD4500/WD4500HLHX-01JJPV0/4286429A6DFB Normal file
View File

@@ -0,0 +1,320 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital VelociRaptor
Device Model: WDC WD4500HLHX-01JJPV0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 04.05G04
User Capacity: 450,098,159,616 bytes [450 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 10000 rpm
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 6.0 Gb/s
Local Time is: Mon Aug 21 01:12:34 2023 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6180) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 75) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 16
3 Spin_Up_Time POS--K 234 233 021 - 3258
4 Start_Stop_Count -O--CK 096 096 000 - 4414
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 062 062 000 - 27853
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 096 096 000 - 4409
192 Power-Off_Retract_Count -O--CK 200 200 000 - 394
193 Load_Cycle_Count -O--CK 199 199 000 - 4019
194 Temperature_Celsius -O---K 116 112 000 - 34
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 6
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 12
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 [11] occurred at disk power-on lifetime: 27538 hours (1147 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 64 ca 10 40 00 Error: UNC at LBA = 0x0d64ca10 = 224709136
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 98 00 00 0d 64 ca 00 40 08 04:52:47.029 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 04:52:47.028 READ LOG EXT
60 00 40 00 88 00 00 0d 64 ca 00 40 08 04:52:45.632 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 04:52:45.632 READ LOG EXT
60 00 40 00 78 00 00 0d 64 ca 00 40 08 04:52:44.235 READ FPDMA QUEUED
Error 11 [10] occurred at disk power-on lifetime: 27538 hours (1147 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 64 ca 10 40 00 Error: UNC at LBA = 0x0d64ca10 = 224709136
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 88 00 00 0d 64 ca 00 40 08 04:52:45.632 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 04:52:45.632 READ LOG EXT
60 00 40 00 78 00 00 0d 64 ca 00 40 08 04:52:44.235 READ FPDMA QUEUED
60 00 40 00 70 00 00 0d 64 a9 80 40 08 04:52:44.234 READ FPDMA QUEUED
61 00 40 00 68 00 00 32 3a 8b 00 40 08 04:52:44.231 WRITE FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 27538 hours (1147 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 64 ca 10 40 00 Error: UNC at LBA = 0x0d64ca10 = 224709136
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 78 00 00 0d 64 ca 00 40 08 04:52:44.235 READ FPDMA QUEUED
60 00 40 00 70 00 00 0d 64 a9 80 40 08 04:52:44.234 READ FPDMA QUEUED
61 00 40 00 68 00 00 32 3a 8b 00 40 08 04:52:44.231 WRITE FPDMA QUEUED
60 00 40 00 60 00 00 32 3a 8b 00 40 08 04:52:44.231 READ FPDMA QUEUED
61 00 40 00 58 00 00 32 36 7e 00 40 08 04:52:44.231 WRITE FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 27538 hours (1147 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 65 a2 56 40 00 Error: WP at LBA = 0x0d65a256 = 224764502
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 d8 00 00 32 36 7d c0 40 08 04:43:56.548 WRITE FPDMA QUEUED
61 00 40 00 d0 00 00 21 ef 0e 40 40 08 04:43:56.548 WRITE FPDMA QUEUED
61 00 40 00 c8 00 00 21 17 d6 00 40 08 04:43:56.548 WRITE FPDMA QUEUED
61 00 40 00 c0 00 00 1e 7e 9c 80 40 08 04:43:56.548 WRITE FPDMA QUEUED
61 00 40 00 b8 00 00 19 fc 40 40 40 08 04:43:56.548 WRITE FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 27538 hours (1147 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 65 a2 56 40 00 Error: UNC at LBA = 0x0d65a256 = 224764502
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 28 00 00 32 3a ad 40 40 08 04:43:55.135 READ FPDMA QUEUED
60 00 80 00 20 00 00 0d 03 94 40 40 08 04:43:55.128 READ FPDMA QUEUED
60 00 40 00 18 00 00 32 3b 96 c0 40 08 04:43:55.128 READ FPDMA QUEUED
60 01 00 00 10 00 00 0d 65 a2 40 40 08 04:43:55.128 READ FPDMA QUEUED
60 00 40 00 08 00 00 32 3a b1 40 40 08 04:43:55.127 READ FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 20585 hours (857 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 2f d4 f9 40 00 Error: UNC at LBA = 0x0d2fd4f9 = 221238521
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 78 00 00 0d 2f d5 40 40 08 03:17:43.880 READ FPDMA QUEUED
60 00 08 00 70 00 00 0d 2f d5 00 40 08 03:17:43.880 READ FPDMA QUEUED
60 00 38 00 68 00 00 0d 2f d4 c8 40 08 03:17:43.880 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 03:17:43.879 READ LOG EXT
60 00 08 00 58 00 00 0d 2f d5 40 40 08 03:17:42.487 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 20585 hours (857 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 2f d4 f9 40 00 Error: UNC at LBA = 0x0d2fd4f9 = 221238521
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 58 00 00 0d 2f d5 40 40 08 03:17:42.487 READ FPDMA QUEUED
60 00 08 00 50 00 00 0d 2f d4 c0 40 08 03:17:42.487 READ FPDMA QUEUED
60 00 08 00 48 00 00 0d 2f d5 00 40 08 03:17:42.487 READ FPDMA QUEUED
60 00 38 00 40 00 00 0d 2f d4 c8 40 08 03:17:42.487 READ FPDMA QUEUED
60 00 38 00 38 00 00 0d 2f d4 88 40 08 03:17:42.487 READ FPDMA QUEUED
Error 5 [4] occurred at disk power-on lifetime: 20059 hours (835 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0d 2f d4 f9 40 00 Error: UNC at LBA = 0x0d2fd4f9 = 221238521
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 10 00 00 0d 2f d4 f8 40 08 05:33:27.737 READ FPDMA QUEUED
60 00 08 00 08 00 00 0d 2f d5 38 40 08 05:33:27.733 READ FPDMA QUEUED
60 00 08 00 00 00 00 0d 2f d4 b8 40 08 05:33:27.733 READ FPDMA QUEUED
60 00 08 00 f8 00 00 0d 2f d4 f8 40 08 05:33:27.733 READ FPDMA QUEUED
60 00 38 00 f0 00 00 0d 2f d4 c0 40 08 05:33:27.733 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7911 -
# 2 Short offline Completed without error 00% 4771 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 24/35 Celsius
Lifetime Min/Max Temperature: 22/38 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (50)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 89522 Vendor specific