mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
163
SSD/Acer/SSD SA100/SSD SA100 960GB/EC949B4B3D3C
Normal file
163
SSD/Acer/SSD SA100/SSD SA100 960GB/EC949B4B3D3C
Normal file
@@ -0,0 +1,163 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: Acer SSD SA100 960GB
|
||||
Serial Number: --
|
||||
Firmware Version: U0401A0
|
||||
User Capacity: 960,197,124,096 bytes [960 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 T13/2161-D revision 4
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Tue Aug 20 17:30:09 2024 MDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x11) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
SCT capabilities: (0x0001) SCT Status supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0
|
||||
5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0
|
||||
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 1244
|
||||
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 409
|
||||
160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0
|
||||
161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100
|
||||
163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 12
|
||||
164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 136
|
||||
165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 29
|
||||
166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7
|
||||
167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 24
|
||||
168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050
|
||||
169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100
|
||||
175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
|
||||
176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
|
||||
177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0
|
||||
181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0
|
||||
182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0
|
||||
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 142
|
||||
194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 36
|
||||
195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0
|
||||
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0
|
||||
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 644
|
||||
232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100
|
||||
241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 157628
|
||||
242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 39908
|
||||
245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 102708
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 644 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 642 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
84 51 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
ec 00 01 00 00 00 00 08 00:00:00.000 IDENTIFY DEVICE
|
||||
b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA
|
||||
b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
|
||||
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
|
||||
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
|
||||
|
||||
Error 641 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 00 00 00 00 00 00 at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
61 48 30 18 b9 64 40 08 00:00:00.000 WRITE FPDMA QUEUED
|
||||
b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG
|
||||
b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG
|
||||
ea 00 00 00 00 00 a0 08 00:00:00.000 FLUSH CACHE EXT
|
||||
b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS
|
||||
|
||||
Error 640 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
00 00 00 00 00 00 00 at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
61 20 d0 70 eb 1c 40 00 00:00:00.000 WRITE FPDMA QUEUED
|
||||
61 20 70 70 eb 1c 40 00 00:00:00.000 WRITE FPDMA QUEUED
|
||||
61 20 90 70 eb 1c 40 00 00:00:00.000 WRITE FPDMA QUEUED
|
||||
ec 00 01 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
|
||||
ec 00 01 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
The above only provides legacy SMART information - try 'smartctl -x' for more
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user