1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30

Update of reports (new: 6895, modified: 16)

This commit is contained in:
Andrey Ponomarenko
2025-01-05 01:57:11 +03:00
parent e3bee1f876
commit 2a811b67c1
6911 changed files with 1114213 additions and 734 deletions

View File

@@ -0,0 +1,128 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: 2.5" SATA SSD 3ME3
Serial Number: --
LU WWN Device Id: 5 24693f ...
Firmware Version: S16425
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 14 22:39:27 2024 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 069 000 000 - 40261
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 019 000 000 - 19
163 Total_Bad_Block_Count ------ 000 000 000 - 9
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 046 000 000 - 46
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 161 000 - 52133415
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 158 001 000 - 1694
167 Average_Erase_Count -O---- 080 001 000 - 1616
170 Spare_Block_Count PO---- 100 001 000 - 147
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x517693943a98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 203646
242 Host_Reads_32MiB -O---- 100 001 000 - 1484
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,162 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 3IE2/3ME2/3MG2/3SE2/3TG6 SSDs
Device Model: 2.5" SATA SSD 3MG2-P
Serial Number: --
Firmware Version: M161225
User Capacity: 31,016,853,504 bytes [31.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Apr 28 19:51:05 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 1148
12 Power_Cycle_Count ------ 100 100 000 - 10765
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
161 Number_of_Pure_Spare ------ 100 100 000 - 112
163 Total_Bad_Block_Count ------ 100 100 000 - 12
164 Total_Erase_Count ------ 100 100 000 - 1424696
165 Max_Erase_Count ------ 100 100 000 - 1399
166 Min_Erase_Count ------ 100 100 000 - 1298
167 Average_Erase_Count ------ 100 100 000 - 1351
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
169 Remaining_Lifetime_Perc ------ 100 100 000 - 55
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
177 Wear_Leveling_Count ------ 100 100 050 - 6631
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 137
194 Temperature_Celsius ------ 100 100 000 - 50
195 Hardware_ECC_Recovered ------ 100 100 000 - 176718
196 Reallocated_Event_Count ------ 100 100 016 - 0
197 Current_Pending_Sector ------ 100 100 000 - 0
198 Offline_Uncorrectable ------ 100 100 000 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 85
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Host_Writes_32MiB ------ 100 100 000 - 780835
242 Host_Reads_32MiB ------ 100 100 000 - 4374
245 Flash_Writes_32MiB ------ 100 100 000 - 1424696
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
6 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 10765 --- Lifetime Power-On Resets
0x01 0x010 4 1148 --- Power-on Hours
0x01 0x018 6 51172863921 --- Logical Sectors Written
0x01 0x020 6 1278851301 --- Number of Write Commands
0x01 0x028 6 286659695 --- Logical Sectors Read
0x01 0x030 6 3816335 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (empty) ==
0x03 ===== = = === == Rotating Media Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 218 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 703 --- Number of Hardware Resets
0x06 0x018 4 85 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 45 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,177 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: 2.5" SATA SSD 3TE7
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S22831
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 30 15:07:13 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--C- 100 100 000 - 0
9 Power_On_Hours -O--C- 191 100 000 - 447
12 Power_Cycle_Count -O--C- 050 000 000 - 50
163 Unknown_Attribute -O--C- 006 000 000 - 6
165 Unknown_Attribute -O--C- 004 000 000 - 4
167 Unknown_Attribute -O--C- 002 000 000 - 2
169 Unknown_Attribute ------ 100 000 000 - 100
170 Unknown_Attribute PO--C- 100 100 001 - 268
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
192 Power-Off_Retract_Count -O--C- 044 000 000 - 44
194 Temperature_Celsius -O---- 033 100 000 - 33 (3 45 0 20 0)
229 Unknown_Attribute ------ 100 100 000 - 251195517583000
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O--C- 100 100 000 - 1098
242 Total_LBAs_Read -O--C- 100 100 000 - 349
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: ?/40 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (58)
SCT Error Recovery Control:
Read: 80 (8.0 seconds)
Write: 80 (8.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 50 --- Lifetime Power-On Resets
0x01 0x010 4 447 --- Power-on Hours
0x01 0x018 6 71983804 --- Logical Sectors Written
0x01 0x020 6 1000682 --- Number of Write Commands
0x01 0x028 6 22897760 --- Logical Sectors Read
0x01 0x030 6 445842 --- Number of Read Commands
0x01 0x038 6 413928572516 --- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,139 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S15A19
User Capacity: 8,012,390,400 bytes [8.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Feb 2 01:38:57 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 255 000 000 - 255
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 025 000 000 - 25
163 Total_Bad_Block_Count ------ 000 000 000 - 3
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 079 000 000 - 79
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 123 000 - 3032582
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 127 001 000 - 639
167 Average_Erase_Count -O---- 110 001 000 - 622
170 Spare_Block_Count PO---- 100 001 000 - 74
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x51769394de98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 11846
242 Host_Reads_32MiB -O---- 100 001 000 - 867
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 37 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 49 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,139 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S15A19
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Aug 21 20:22:56 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 255 000 000 - 255
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 021 000 000 - 21
163 Total_Bad_Block_Count ------ 000 000 000 - 10
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 000 000 000 - 0
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 176 000 - 27543582
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 079 001 000 - 3151
167 Average_Erase_Count -O---- 047 001 000 - 3119
170 Spare_Block_Count PO---- 100 001 000 - 146
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x517693943a98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 107592
242 Host_Reads_32MiB -O---- 100 001 000 - 2125
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 9 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 16 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,139 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S15A19
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 24 12:02:01 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 255 000 000 - 255
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 066 000 000 - 66
163 Total_Bad_Block_Count ------ 000 000 000 - 14
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 000 000 000 - 0
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 223 000 - 53352985
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 169 001 000 - 4265
167 Average_Erase_Count -O---- 168 001 000 - 3240
170 Spare_Block_Count PO---- 100 001 000 - 142
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x517693943a98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 208410
242 Host_Reads_32MiB -O---- 100 001 000 - 2920
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 8 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 13 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,139 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S15A19
User Capacity: 8,012,390,400 bytes [8.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Feb 7 15:45:51 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 255 000 000 - 255
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 060 000 000 - 60
163 Total_Bad_Block_Count ------ 000 000 000 - 8
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 047 000 000 - 47
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 133 000 - 11584108
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 106 001 000 - 2154
167 Average_Erase_Count -O---- 047 001 000 - 1583
170 Spare_Block_Count PO---- 100 001 000 - 69
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x51769394de98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 45250
242 Host_Reads_32MiB -O---- 100 001 000 - 710
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 17 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,139 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S15A19
User Capacity: 8,012,390,400 bytes [8.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Aug 12 09:16:23 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 255 000 000 - 255
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 038 000 000 - 38
163 Total_Bad_Block_Count ------ 000 000 000 - 5
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 016 000 000 - 16
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 171 000 - 640628
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 057 001 000 - 4153
167 Average_Erase_Count -O---- 204 001 000 - 2508
170 Spare_Block_Count PO---- 100 001 000 - 72
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x51769394de98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 2502
242 Host_Reads_32MiB -O---- 100 001 000 - 548
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 11 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 9 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,139 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S15A19
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 6 23:57:28 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 255 000 000 - 255
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 023 000 000 - 23
163 Total_Bad_Block_Count ------ 000 000 000 - 36
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 043 000 000 - 43
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 230 000 - 16182314
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 077 001 000 - 2125
167 Average_Erase_Count -O---- 169 001 000 - 1705
170 Spare_Block_Count PO---- 100 001 000 - 120
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x517693943a98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 63212
242 Host_Reads_32MiB -O---- 100 001 000 - 1296
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 13 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,128 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 246930 ...
Firmware Version: S17411
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Nov 30 16:45:12 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 166 000 000 - 26278
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 052 000 000 - 52
163 Total_Bad_Block_Count ------ 000 000 000 - 11
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 006 000 000 - 6
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 173 000 - 20762061
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 052 001 000 - 2868
167 Average_Erase_Count -O---- 003 001 000 - 2819
170 Spare_Block_Count PO---- 100 001 000 - 157
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x517693943a98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 81101
242 Host_Reads_32MiB -O---- 100 001 000 - 89915
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 18 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,128 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: InnoDisk Corp. - mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S17411
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 13 16:59:43 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Later_Bad_Block PO--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O---- 041 000 000 - 30761
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 051 000 000 - 51
163 Total_Bad_Block_Count ------ 000 000 000 - 3
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 085 000 000 - 85
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Data_Log_Write_Count ------ 000 174 000 - 6955498
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O---- 196 001 000 - 452
167 Average_Erase_Count -O---- 187 001 000 - 443
170 Spare_Block_Count PO---- 100 001 000 - 163
171 Program_Fail_Count -O---- 000 001 000 - 0
172 Erase_Fail_Count -O---- 000 001 000 - 0
176 RANGE_RECORD_Count ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Flash_ID -O---- 100 001 000 - 0x517693943a98
232 Spares_Remaining_Perc PO---- 100 001 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 001 000 - 27169
242 Host_Reads_32MiB -O---- 100 001 000 - 2227
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,111 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: DEM24-16GM41BC1DC-PC
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L19620
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 17 15:57:59 2023 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 020 000 000 - 6622
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 109 000 000 - 109
163 Unknown_Attribute ------ 000 000 000 - 10
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 098 000 000 - 98
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 38
194 Temperature_Celsius -O---- 047 100 000 - 48 (3 50 0 34 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O--C- 159 100 000 - 159
167 Unknown_Attribute -O--C- 000 100 000 - 66
170 Unknown_Attribute PO--C- 100 100 010 - 71
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
176 Erase_Fail_Count_Chip ------ 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Unknown_Attribute ------ 100 100 000 - 89569723997848
232 Available_Reservd_Space PO--C- 000 000 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 100 000 - 7993
242 Total_LBAs_Read -O---- 100 100 000 - 7138
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,111 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: DEM24-16GM41BC1DC-PC
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L19620
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 15 16:00:46 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 253 000 000 - 1836
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 104 000 000 - 104
163 Unknown_Attribute ------ 000 000 000 - 16
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 071 000 000 - 71
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 39
194 Temperature_Celsius -O---- 059 100 000 - 59 (3 61 0 41 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O--C- 129 100 000 - 1921
167 Unknown_Attribute -O--C- 000 100 000 - 882
170 Unknown_Attribute PO--C- 100 100 010 - 64
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
176 Erase_Fail_Count_Chip ------ 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Unknown_Attribute ------ 100 100 000 - 89569723997848
232 Available_Reservd_Space PO--C- 000 000 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 100 000 - 43643
242 Total_LBAs_Read -O---- 100 100 000 - 1461
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,111 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: DEM24-16GM41BC1DC-PC
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L19620
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 1 16:25:05 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 000 000 000 - 1290
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 235 000 000 - 235
163 Unknown_Attribute ------ 000 000 000 - 9
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 100 000 000 - 100
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 53
194 Temperature_Celsius -O---- 054 100 000 - 55 (3 55 0 53 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O--C- 013 100 000 - 13
167 Unknown_Attribute -O--C- 000 100 000 - 7
170 Unknown_Attribute PO--C- 100 100 010 - 71
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
176 Erase_Fail_Count_Chip ------ 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Unknown_Attribute ------ 100 100 000 - 89569723997848
232 Available_Reservd_Space PO--C- 000 000 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 100 000 - 2988
242 Total_LBAs_Read -O---- 100 100 000 - 2934
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,112 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: DEM24-32GM41BC1DC-PC
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L17A27
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 28 17:56:29 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 001 000 000 - 28511
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 225 000 000 - 225
163 Unknown_Attribute ------ 000 000 000 - 13
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 090 000 000 - 90
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 45
194 Temperature_Celsius -O---- 038 100 000 - 39 (3 39 0 30 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O--C- 171 100 000 - 427
167 Unknown_Attribute -O--C- 000 100 000 - 300
170 Unknown_Attribute PO--C- 100 100 010 - 139
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
176 Erase_Fail_Count_Chip ------ 000 000 000 - 0
184 End-to-End_Error -O--C- 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Unknown_Attribute ------ 100 100 000 - 89569723955864
232 Available_Reservd_Space PO--C- 000 000 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 100 000 - 90384
242 Total_LBAs_Read -O---- 100 100 000 - 118303
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 20% 0 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,111 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: DEM24-32GM41BC1DC-PC
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L19620
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Sep 30 14:11:20 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 172 000 000 - 2841
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 253 000 000 - 554
163 Unknown_Attribute ------ 000 000 000 - 11
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 100 000 000 - 100
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 131
194 Temperature_Celsius -O---- 055 100 000 - 55 (3 58 0 42 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O--C- 047 100 000 - 47
167 Unknown_Attribute -O--C- 000 100 000 - 13
170 Unknown_Attribute PO--C- 100 100 010 - 141
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
176 Erase_Fail_Count_Chip ------ 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Unknown_Attribute ------ 100 100 000 - 89569723955864
232 Available_Reservd_Space PO--C- 000 000 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 100 000 - 7827
242 Total_LBAs_Read -O---- 100 100 000 - 7697
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,130 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Mar 9 23:15:34 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 9727
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 1719
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 244 000 - 461207
170 Unknown_Attribute PO---- 100 100 --- - 786432
173 Unknown_Attribute -O---- 100 100 --- - 8585311
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 7 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,130 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 30 21:05:45 2023 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 13893
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 1065
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 254 000 - 841735
170 Unknown_Attribute PO---- 100 100 --- - 655360
173 Unknown_Attribute -O---- 100 100 --- - 8388701
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 13 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,130 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 15 21:24:17 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 11752
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 1232
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 231 000 - 1149787
170 Unknown_Attribute PO---- 100 100 --- - 917504
173 Unknown_Attribute -O---- 100 100 --- - 14614682
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 7 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,130 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Aug 18 12:28:57 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 28336
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 1520
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 008 000 - 931508
170 Unknown_Attribute PO---- 100 100 --- - 655360
173 Unknown_Attribute -O---- 100 100 --- - 12583054
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 6 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,130 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 16 17:02:39 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 6974
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 915
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 163 000 - 601670
170 Unknown_Attribute PO---- 100 100 --- - 1441792
173 Unknown_Attribute -O---- 100 100 --- - 7209024
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 10 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 24 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,130 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Oct 10 11:34:57 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 17892
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 1154
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 170 000 - 429491
170 Unknown_Attribute PO---- 100 100 --- - 1048576
173 Unknown_Attribute -O---- 100 100 --- - 7929938
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 6 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,130 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME A
Serial Number: --
Firmware Version: S141002
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Unavailable
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Oct 4 22:18:51 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 57400
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 100 100 000 - 486
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
225 Unknown_SSD_Attribute ------ 000 216 000 - 809901
170 Unknown_Attribute PO---- 100 100 --- - 1114112
173 Unknown_Attribute -O---- 100 100 --- - 12976230
229 Unknown_Attribute -O---- 100 100 --- - 88470212370072
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL R/W 16 Host vendor specific log
0xe0 GPL R/W 1 SCT Command/Status
0xe1 GPL R/W 1 SCT Data Transfer
ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed
SMART Error Log not supported
ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 6 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 14 21:29:46 2024 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 229 000 000 - 5093
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 191 000 000 - 447
163 Unknown_Attribute ------ 000 000 000 - 3
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 098 000 000 - 98
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 201 000 - 829949
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 071 001 000 - 71
167 Unknown_Attribute -O---- 048 001 000 - 48
170 Unknown_Attribute PO---- 100 001 000 - 76
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 3241
242 Total_LBAs_Read -O---- 100 001 000 - 4113
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 17 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jun 12 01:57:44 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 144 000 000 - 17552
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 175 000 000 - 1711
163 Unknown_Attribute ------ 000 000 000 - 17
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 083 000 000 - 83
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 034 000 - 2017713
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 015 001 000 - 527
167 Unknown_Attribute -O---- 244 001 000 - 500
170 Unknown_Attribute PO---- 100 001 000 - 62
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 7881
242 Total_LBAs_Read -O---- 100 001 000 - 21722
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Sep 6 17:12:17 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 084 000 000 - 4436
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 190 000 000 - 702
163 Unknown_Attribute ------ 000 000 000 - 4
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 252 000 - 482682
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 034 001 000 - 34
167 Unknown_Attribute -O---- 026 001 000 - 26
170 Unknown_Attribute PO---- 100 001 000 - 75
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 1885
242 Total_LBAs_Read -O---- 100 001 000 - 6461
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 1 18:36:14 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 204 000 000 - 5068
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 153 000 000 - 153
163 Unknown_Attribute ------ 000 000 000 - 10
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 098 000 000 - 98
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 214 000 - 577906
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 046 001 000 - 46
167 Unknown_Attribute -O---- 038 001 000 - 38
170 Unknown_Attribute PO---- 100 001 000 - 69
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 2257
242 Total_LBAs_Read -O---- 100 001 000 - 1678
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 19 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Aug 5 21:47:16 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 052 000 000 - 4404
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 172 000 000 - 684
163 Unknown_Attribute ------ 000 000 000 - 3
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 001 000 000 - 1
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 188 000 - 645307
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 047 001 000 - 47
167 Unknown_Attribute -O---- 029 001 000 - 29
170 Unknown_Attribute PO---- 100 001 000 - 76
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 2520
242 Total_LBAs_Read -O---- 100 001 000 - 6739
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 13 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Dec 28 22:52:09 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 241 000 000 - 13553
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 009 000 000 - 1033
163 Unknown_Attribute ------ 000 000 000 - 7
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 086 000 000 - 86
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 082 000 - 10600671
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 081 001 000 - 593
167 Unknown_Attribute -O---- 162 001 000 - 418
170 Unknown_Attribute PO---- 100 001 000 - 72
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 41408
242 Total_LBAs_Read -O---- 100 001 000 - 20572
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 13 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jun 18 01:20:10 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 095 000 000 - 1631
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 218 000 000 - 218
163 Unknown_Attribute ------ 000 000 000 - 8
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 058 000 - 415053
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 021 001 000 - 21
167 Unknown_Attribute -O---- 015 001 000 - 15
170 Unknown_Attribute PO---- 100 001 000 - 71
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 1621
242 Total_LBAs_Read -O---- 100 001 000 - 2059
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 15 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 08GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 7,998,537,728 bytes [7.99 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 24 21:58:40 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 069 000 000 - 1349
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 197 000 000 - 197
163 Unknown_Attribute ------ 000 000 000 - 6
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 093 000 - 359888
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 022 001 000 - 22
167 Unknown_Attribute -O---- 018 001 000 - 18
170 Unknown_Attribute PO---- 100 001 000 - 73
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 1405
242 Total_LBAs_Read -O---- 100 001 000 - 2324
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 15 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 16GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Nov 3 10:39:10 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 062 000 000 - 6462
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 049 000 000 - 1329
163 Unknown_Attribute ------ 000 000 000 - 5
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 174 000 - 907686
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 023 001 000 - 23
167 Unknown_Attribute -O---- 016 001 000 - 16
170 Unknown_Attribute PO---- 100 001 000 - 73
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 3545
242 Total_LBAs_Read -O---- 100 001 000 - 15244
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 16GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jul 23 20:07:31 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 069 000 000 - 13893
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 077 000 000 - 589
163 Unknown_Attribute ------ 000 000 000 - 7
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 095 000 000 - 95
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 160 000 - 5947817
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 208 001 000 - 208
167 Unknown_Attribute -O---- 147 001 000 - 147
170 Unknown_Attribute PO---- 100 001 000 - 71
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 23233
242 Total_LBAs_Read -O---- 100 001 000 - 6031
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 9 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 16GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jul 21 11:20:04 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 124 000 000 - 6268
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 023 000 000 - 791
163 Unknown_Attribute ------ 000 000 000 - 6
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 030 000 000 - 2846
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 177 000 - 670230
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 020 001 000 - 20
167 Unknown_Attribute -O---- 015 001 000 - 15
170 Unknown_Attribute PO---- 100 001 000 - 72
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 2618
242 Total_LBAs_Read -O---- 100 001 000 - 9301
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 13 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 16GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 29 12:22:52 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 116 000 000 - 7540
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 108 000 000 - 876
163 Unknown_Attribute ------ 000 000 000 - 10
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 099 000 000 - 99
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 001 000 000 - 1
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 017 000 - 814193
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 020 001 000 - 20
167 Unknown_Attribute -O---- 016 001 000 - 16
170 Unknown_Attribute PO---- 100 001 000 - 68
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723997848
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 3180
242 Total_LBAs_Read -O---- 100 001 000 - 9497
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 32GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 16 19:13:58 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 044 000 000 - 5932
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 032 000 000 - 800
163 Unknown_Attribute ------ 000 000 000 - 17
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 098 000 000 - 98
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 240 000 - 1310616
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 064 001 000 - 64
167 Unknown_Attribute -O---- 036 001 000 - 36
170 Unknown_Attribute PO---- 100 001 000 - 139
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723955864
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 5119
242 Total_LBAs_Read -O---- 100 001 000 - 14109
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,127 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Innodisk DEMSR- 32GB mSATA 3ME3
Serial Number: --
LU WWN Device Id: 5 24693e ...
Firmware Version: S16425G3
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 9 03:35:03 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 001 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours -O---- 247 000 000 - 11255
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count -O---- 096 000 000 - 1376
163 Unknown_Attribute ------ 000 000 000 - 13
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 098 000 000 - 98
175 Program_Fail_Count_Chip ------ 000 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
194 Temperature_Celsius ------ 030 100 000 - 30 (2 100 0 0 0)
197 Current_Pending_Sector -O--C- 000 100 000 - 0
225 Unknown_SSD_Attribute ------ 000 164 000 - 971513
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
165 Unknown_Attribute -O---- 047 001 000 - 47
167 Unknown_Attribute -O---- 031 001 000 - 31
170 Unknown_Attribute PO---- 100 001 000 - 143
171 Unknown_Attribute -O---- 000 001 000 - 0
172 Unknown_Attribute -O---- 000 001 000 - 0
176 Erase_Fail_Count_Chip ------ 100 001 000 - 0
187 Reported_Uncorrect -O---- 000 001 000 - 0
229 Unknown_Attribute -O---- 100 001 000 - 89569723955864
232 Available_Reservd_Space PO---- 100 001 000 - 0
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O---- 100 001 000 - 3794
242 Total_LBAs_Read -O---- 100 001 000 - 19601
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Input/output error
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Read SCT Status failed: Input/output error
Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

View File

@@ -0,0 +1,183 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 3IE2/3ME2/3MG2/3SE2/3TG6 SSDs
Device Model: M.2 (S80) 3MG2-P
Serial Number: --
Firmware Version: M150821
User Capacity: 248,058,961,920 bytes [248 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jun 5 10:29:12 2024 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 57) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 13396
12 Power_Cycle_Count ------ 100 100 000 - 165
160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0
161 Number_of_Pure_Spare ------ 100 100 000 - 180
163 Total_Bad_Block_Count ------ 100 100 000 - 44
164 Total_Erase_Count ------ 100 100 000 - 1833284
165 Max_Erase_Count ------ 100 100 000 - 952
166 Min_Erase_Count ------ 100 100 000 - 849
167 Average_Erase_Count ------ 100 100 000 - 892
168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000
169 Remaining_Lifetime_Perc ------ 100 100 000 - 71
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
177 Wear_Leveling_Count ------ 100 100 050 - 8631
178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 44
194 Temperature_Celsius ------ 100 100 000 - 59
195 Hardware_ECC_Recovered ------ 100 100 000 - 66046
196 Reallocated_Event_Count ------ 100 100 016 - 0
197 Current_Pending_Sector ------ 100 100 000 - 0
198 Offline_Uncorrectable ------ 100 100 000 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Host_Writes_32MiB ------ 100 100 000 - 2286360
242 Host_Reads_32MiB ------ 100 100 000 - 270404
245 Flash_Writes_32MiB ------ 100 100 000 - 7333136
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13314 -
# 2 Short offline Completed without error 00% 13306 -
# 3 Short offline Completed without error 00% 13196 -
# 4 Short offline Completed without error 00% 13172 -
# 5 Short offline Completed without error 00% 13148 -
# 6 Short offline Completed without error 00% 13124 -
# 7 Short offline Completed without error 00% 13100 -
# 8 Short offline Completed without error 00% 13076 -
# 9 Short offline Completed without error 00% 13052 -
#10 Short offline Completed without error 00% 13028 -
#11 Short offline Completed without error 00% 13004 -
#12 Short offline Completed without error 00% 12980 -
#13 Short offline Completed without error 00% 12956 -
#14 Short offline Completed without error 00% 12932 -
#15 Short offline Completed without error 00% 12908 -
#16 Short offline Completed without error 00% 12884 -
#17 Short offline Completed without error 00% 12860 -
#18 Short offline Completed without error 00% 12836 -
#19 Short offline Completed without error 00% 12812 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
7 0 65535 Read_scanning was completed without error
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 165 --- Lifetime Power-On Resets
0x01 0x010 4 13396 --- Power-on Hours
0x01 0x018 6 3810018073 --- Logical Sectors Written
0x01 0x020 6 280712044 --- Number of Write Commands
0x01 0x028 6 541385359 --- Logical Sectors Read
0x01 0x030 6 249386312 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (empty) ==
0x03 ===== = = === == Rotating Media Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 44 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 8676 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 29 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,112 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: SATA Slim 3ME4
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L17606
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 6 23:25:50 2024 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
5 Later_Bad_Block -O--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 004 000 000 - 1120
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 023 000 000 - 23
163 Total_Bad_Block_Count ------ 000 000 000 - 24
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 096 000 000 - 96
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 6
194 Temperature_Celsius -O---- 052 100 000 - 52 (3 54 0 51 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Data_Log_Write_Count ------ 000 000 000 - 0
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O--C- 238 100 000 - 750
167 Average_Erase_Count -O--C- 000 100 000 - 124
170 Spare_Block_Count PO--C- 100 100 010 - 127
171 Program_Fail_Count -O--C- 000 100 000 - 0
172 Erase_Fail_Count -O--C- 000 100 000 - 0
176 RANGE_RECORD_Count ------ 000 000 000 - 0
184 End-to-End_Error -O--C- 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Flash_ID ------ 100 100 000 - 0x517693943a98
232 Spares_Remaining_Perc PO--C- 000 000 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 100 000 - 44909
242 Host_Reads_32MiB -O---- 100 100 000 - 3798
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,112 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Innodisk 1IE3/3IE3/3ME3/3IE4/3ME4 SSDs
Device Model: SATA Slim 3ME4
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Firmware Version: L17606
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Feb 7 02:37:14 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
5 Later_Bad_Block -O--C- 100 100 001 - 0
7 Seek_Error_Rate ------ 000 000 000 - 0
8 Seek_Time_Performance ------ 000 000 000 - 0
9 Power_On_Hours -O--C- 000 000 000 - 33
10 Spin_Retry_Count ------ 000 000 000 - 0
12 Power_Cycle_Count -O--C- 011 000 000 - 11
163 Total_Bad_Block_Count ------ 000 000 000 - 19
168 SATA_PHY_Error_Count ------ 000 000 000 - 0
169 Remaining_Lifetime_Perc ------ 100 000 000 - 100
175 Bad_Cluster_Table_Count ------ 000 000 000 - 0
192 Power-Off_Retract_Count -O--C- 000 000 000 - 5
194 Temperature_Celsius -O---- 052 100 000 - 52 (3 53 0 50 0)
197 Current_Pending_Sector ------ 000 000 000 - 0
225 Data_Log_Write_Count ------ 000 000 000 - 0
240 Write_Head ------ 000 000 000 - 0
165 Max_Erase_Count -O--C- 010 100 000 - 10
167 Average_Erase_Count -O--C- 000 100 000 - 2
170 Spare_Block_Count PO--C- 100 100 010 - 133
171 Program_Fail_Count -O--C- 000 100 000 - 0
172 Erase_Fail_Count -O--C- 000 100 000 - 0
176 RANGE_RECORD_Count ------ 000 000 000 - 0
184 End-to-End_Error -O--C- 000 000 000 - 0
187 Reported_Uncorrect -O--C- 000 000 000 - 0
229 Flash_ID ------ 100 100 000 - 0x517693943a98
232 Spares_Remaining_Perc PO--C- 000 000 000 - 0
235 Later_Bad_Blk_Inf_R/W/E -O---- 000 000 000 - 0 0 0
241 Host_Writes_32MiB -O---- 100 100 000 - 840
242 Host_Reads_32MiB -O---- 100 100 000 - 630
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported

View File

@@ -0,0 +1,177 @@
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: mSATA 3TE7
Serial Number: --
LU WWN Device Id: 5 000000 ...
Firmware Version: S19C04B
User Capacity: 27,516,174,336 bytes [27.5 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Sep 16 23:54:01 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--C- 100 100 000 - 0
9 Power_On_Hours -O--C- 098 100 000 - 29282
12 Power_Cycle_Count -O--C- 033 000 000 - 33
163 Unknown_Attribute -O--C- 023 000 000 - 23
165 Unknown_Attribute -O--C- 120 000 000 - 6520
167 Unknown_Attribute -O--C- 073 000 000 - 329
169 Unknown_Attribute ------ 100 100 000 - 90
170 Unknown_Attribute PO--C- 100 100 001 - 336
171 Unknown_Attribute -O--C- 000 100 000 - 0
172 Unknown_Attribute -O--C- 000 100 000 - 0
192 Power-Off_Retract_Count -O--C- 025 000 000 - 25
194 Temperature_Celsius -O---- 055 100 000 - 55 (3 67 0 1 0)
229 Unknown_Attribute ------ 100 100 000 - 125854144806040
235 Unknown_Attribute -O---- 000 000 000 - 0
241 Total_LBAs_Written -O--C- 100 100 000 - 30730
242 Total_LBAs_Read -O--C- 100 100 000 - 596
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 55 Celsius
Power Cycle Min/Max Temperature: ?/58 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (34)
SCT Error Recovery Control:
Read: 80 (8.0 seconds)
Write: 80 (8.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 33 --- Lifetime Power-On Resets
0x01 0x010 4 29282 --- Power-on Hours
0x01 0x018 6 2013985682 --- Logical Sectors Written
0x01 0x020 6 148715297 --- Number of Write Commands
0x01 0x028 6 39120962 --- Logical Sectors Read
0x01 0x030 6 929737 --- Number of Read Commands
0x01 0x038 6 26987615806764 --- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 255 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC