mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
288
SSD/SK hynix/HFS064/HFS064G3AMNB-2200A/9F9D97DD7C4D
Normal file
288
SSD/SK hynix/HFS064/HFS064G3AMNB-2200A/9F9D97DD7C4D
Normal file
@@ -0,0 +1,288 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS064G3AMNB-2200A
|
||||
Serial Number: --
|
||||
Firmware Version: 10105L00
|
||||
User Capacity: 64,023,257,088 bytes [64.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Wed Aug 21 22:34:36 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 058 058 000 - 38026
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 323
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 2947710
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 190
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 2905168
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 8
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 30
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 1058
|
||||
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 13
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 28
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 054 000 000 - 54 (Min/Max 15/64)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 099 000 - 498654204
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
231 Unknown_SSD_Attribute PO--CK 253 253 --- - 1
|
||||
234 Unknown_Attribute -O--CK 100 100 --- - 11335
|
||||
241 Total_LBAs_Written -O--CK 100 100 --- - 7351
|
||||
242 Total_LBAs_Read -O--CK 100 100 --- - 6657
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 5133
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 9233 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 9233 [12] occurred at disk power-on lifetime: 38026 hours (1584 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:11:47.020 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:11:47.020 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 da 36 40 40 40 01:11:44.870 READ DMA EXT
|
||||
25 00 00 00 40 00 00 03 3a 94 18 40 40 01:11:44.800 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 fe ca 20 40 40 01:11:44.790 READ DMA EXT
|
||||
|
||||
Error 9232 [11] occurred at disk power-on lifetime: 38026 hours (1584 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 da 36 40 40 40 01:11:44.870 READ DMA EXT
|
||||
25 00 00 00 40 00 00 03 3a 94 18 40 40 01:11:44.800 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 fe ca 20 40 40 01:11:44.790 READ DMA EXT
|
||||
25 00 00 00 20 00 00 01 fa fa 28 40 40 01:11:44.760 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 fb 37 10 40 40 01:11:44.750 READ DMA EXT
|
||||
|
||||
Error 9231 [10] occurred at disk power-on lifetime: 38026 hours (1584 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 da 36 40 40 40 01:11:44.870 READ DMA EXT
|
||||
25 00 00 00 40 00 00 03 3a 94 18 40 40 01:11:44.800 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 fe ca 20 40 40 01:11:44.790 READ DMA EXT
|
||||
25 00 00 00 20 00 00 01 fa fa 28 40 40 01:11:44.760 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 fb 37 10 40 40 01:11:44.750 READ DMA EXT
|
||||
|
||||
Error 9230 [9] occurred at disk power-on lifetime: 38026 hours (1584 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 01:11:35.440 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 01:11:35.440 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:11:35.440 IDENTIFY DEVICE
|
||||
ef 00 10 00 03 00 00 00 00 00 00 00 00 01:11:35.440 SET FEATURES [Enable SATA feature]
|
||||
ef 00 03 00 45 00 00 00 00 00 00 00 00 01:11:35.440 SET FEATURES [Set transfer mode]
|
||||
|
||||
Error 9229 [8] occurred at disk power-on lifetime: 38026 hours (1584 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 01:11:26.110 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 01:11:26.110 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 01:11:25.550 FLUSH CACHE EXT
|
||||
61 00 08 00 98 00 00 00 00 00 29 40 40 01:11:25.130 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 01:11:25.130 FLUSH CACHE EXT
|
||||
|
||||
Error 9228 [7] occurred at disk power-on lifetime: 38026 hours (1584 days + 10 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 01:11:26.110 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 01:11:26.110 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 01:11:25.550 FLUSH CACHE EXT
|
||||
61 00 08 00 98 00 00 00 00 00 29 40 40 01:11:25.130 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 01:11:25.130 FLUSH CACHE EXT
|
||||
|
||||
Error 9227 [6] occurred at disk power-on lifetime: 38025 hours (1584 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:00:54.490 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:00:54.490 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 da 36 40 40 40 01:00:52.330 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 1f b1 b0 40 40 01:00:52.260 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 70 29 58 40 40 01:00:52.250 READ DMA EXT
|
||||
|
||||
Error 9226 [5] occurred at disk power-on lifetime: 38025 hours (1584 days + 9 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 da 36 40 40 40 01:00:52.330 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 1f b1 b0 40 40 01:00:52.260 READ DMA EXT
|
||||
25 00 00 00 08 00 00 01 70 29 58 40 40 01:00:52.250 READ DMA EXT
|
||||
25 00 00 00 04 00 00 02 98 49 e0 40 40 01:00:52.250 READ DMA EXT
|
||||
25 00 00 00 10 00 00 01 18 c9 e0 40 40 01:00:52.230 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 29 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
288
SSD/SK hynix/HFS064/HFS064G3AMNB-2200A/AB5D78566A7B
Normal file
288
SSD/SK hynix/HFS064/HFS064G3AMNB-2200A/AB5D78566A7B
Normal file
@@ -0,0 +1,288 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS064G3AMNB-2200A
|
||||
Serial Number: --
|
||||
Firmware Version: 10108L00
|
||||
User Capacity: 64,023,257,088 bytes [64.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Nov 19 15:28:23 2024 +07
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 091 091 000 - 8773
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 228
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 780776
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 188
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 279360
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 7
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 19
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 1069
|
||||
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 12
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 042 000 000 - 42 (Min/Max 31/57)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 099 000 - 13243727
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
231 Unknown_SSD_Attribute PO--CK 253 253 --- - 0
|
||||
234 Unknown_Attribute -O--CK 100 100 --- - 1082
|
||||
241 Total_LBAs_Written -O--CK 100 100 --- - 906
|
||||
242 Total_LBAs_Read -O--CK 100 100 --- - 75
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 3038
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 2686 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2686 [5] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.240 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.240 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.230 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.230 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
|
||||
Error 2685 [4] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.230 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.230 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 c3 7d 20 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 c8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
|
||||
Error 2684 [3] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 c3 7d 20 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 c8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 a8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 88 e0 e0 00:00:11.740 READ DMA EXT
|
||||
|
||||
Error 2683 [2] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 c3 7d 20 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 c8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 a8 e0 e0 00:00:11.740 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 c4 58 88 e0 e0 00:00:11.740 READ DMA EXT
|
||||
|
||||
Error 2682 [1] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.700 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.700 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.690 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.690 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:12.230 READ DMA EXT
|
||||
|
||||
Error 2681 [0] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.690 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.690 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 10 00 00 05 16 ff 88 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 16 ff 68 e0 e0 00:00:12.230 READ DMA EXT
|
||||
|
||||
Error 2680 [19] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 10 00 00 05 16 ff 88 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 16 ff 68 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 08 00 00 04 ec 28 78 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 08 00 00 02 7b 2d 10 e0 e0 00:00:12.230 READ DMA EXT
|
||||
|
||||
Error 2679 [18] occurred at disk power-on lifetime: 8772 hours (365 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 02 7a c1 e8 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 10 00 00 05 16 ff 88 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 20 00 00 05 16 ff 68 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 08 00 00 04 ec 28 78 e0 e0 00:00:12.230 READ DMA EXT
|
||||
25 00 00 00 08 00 00 02 7b 2d 10 e0 e0 00:00:12.230 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 73 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
288
SSD/SK hynix/HFS064/HFS064G3AMNB-2200A/ED9DE825CC44
Normal file
288
SSD/SK hynix/HFS064/HFS064G3AMNB-2200A/ED9DE825CC44
Normal file
@@ -0,0 +1,288 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS064G3AMNB-2200A
|
||||
Serial Number: --
|
||||
Firmware Version: 10108L00
|
||||
User Capacity: 64,023,257,088 bytes [64.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Dec 25 14:12:02 2023 EET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 18) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 036 - 4
|
||||
9 Power_On_Hours -O--CK 065 065 000 - 31220
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 52
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 40253753
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 39
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 39726128
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 6
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 19
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 1069
|
||||
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 2
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 9
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 053 000 000 - 53 (Min/Max 27/57)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 110337552
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 2
|
||||
231 Unknown_SSD_Attribute PO--CK 082 082 --- - 19
|
||||
234 Unknown_Attribute -O--CK 100 100 --- - 154789
|
||||
241 Total_LBAs_Written -O--CK 100 100 --- - 37382
|
||||
242 Total_LBAs_Read -O--CK 100 100 --- - 473
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 24357
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 4174 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 4174 [13] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:42:10.290 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:42:10.290 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 4e a9 10 40 40 16d+03:41:53.840 READ DMA EXT
|
||||
25 00 00 00 38 00 00 03 5e 88 90 40 40 16d+03:41:53.810 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 4b 5e d8 40 40 16d+03:41:53.800 READ DMA EXT
|
||||
|
||||
Error 4173 [12] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 4e a9 10 40 40 16d+03:41:53.840 READ DMA EXT
|
||||
25 00 00 00 38 00 00 03 5e 88 90 40 40 16d+03:41:53.810 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 4b 5e d8 40 40 16d+03:41:53.800 READ DMA EXT
|
||||
25 00 00 00 10 00 00 03 67 fe 60 40 40 16d+03:41:53.790 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 4b 71 c0 40 40 16d+03:41:53.780 READ DMA EXT
|
||||
|
||||
Error 4172 [11] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 4e a9 10 40 40 16d+03:41:53.840 READ DMA EXT
|
||||
25 00 00 00 38 00 00 03 5e 88 90 40 40 16d+03:41:53.810 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 4b 5e d8 40 40 16d+03:41:53.800 READ DMA EXT
|
||||
25 00 00 00 10 00 00 03 67 fe 60 40 40 16d+03:41:53.790 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 4b 71 c0 40 40 16d+03:41:53.780 READ DMA EXT
|
||||
|
||||
Error 4171 [10] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 16d+03:41:48.660 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:41:48.660 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:41:48.660 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:39:59.510 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:39:59.490 IDENTIFY DEVICE
|
||||
|
||||
Error 4170 [9] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 18 00 00 03 4c da 58 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 98 56 20 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 18 00 00 01 f4 d8 d8 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 45 2e 38 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 20 00 00 01 44 f8 b8 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
|
||||
Error 4169 [8] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 18 00 00 03 4c da 58 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 98 56 20 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 18 00 00 01 f4 d8 d8 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 45 2e 38 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
25 00 00 00 20 00 00 01 44 f8 b8 40 40 16d+03:39:51.570 READ DMA EXT
|
||||
|
||||
Error 4168 [7] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 16d+03:39:50.080 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:39:50.080 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:39:50.080 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:39:48.900 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 16d+03:39:48.880 IDENTIFY DEVICE
|
||||
|
||||
Error 4167 [6] occurred at disk power-on lifetime: 31219 hours (1300 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 16d+03:39:41.700 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 16d+03:39:41.700 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 16d+03:39:41.220 FLUSH CACHE EXT
|
||||
61 00 08 00 58 00 00 00 00 00 29 40 40 16d+03:39:40.720 WRITE FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 16d+03:39:40.710 FLUSH CACHE EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 20010 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 13 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
281
SSD/SK hynix/HFS064/HFS064G3AMNB-2220A/68F1BD018F8D
Normal file
281
SSD/SK hynix/HFS064/HFS064G3AMNB-2220A/68F1BD018F8D
Normal file
@@ -0,0 +1,281 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS064G3AMNB-2220A
|
||||
Serial Number: --
|
||||
Firmware Version: 10020L00
|
||||
User Capacity: 64,023,257,088 bytes [64.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Aug 5 00:53:15 2023 CST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 078 078 000 - 20317
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 140
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 6671402
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 100 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 24
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 5618784
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 1
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 3
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 1085
|
||||
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 28
|
||||
194 Temperature_Celsius -O---- 038 000 000 - 38 (Min/Max 26/38)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 34709947
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 095 095 000 - 176
|
||||
231 Unknown_SSD_Attribute PO--CK 099 099 010 - 2
|
||||
234 Unknown_Attribute -O--CK 100 100 --- - 21939
|
||||
241 Total_LBAs_Written -O--CK 100 100 --- - 19913
|
||||
242 Total_LBAs_Read -O--CK 100 100 --- - 463
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 6284
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 24417 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 24417 [16] occurred at disk power-on lifetime: 20155 hours (839 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:28.840 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:28.840 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 04 ec 2f 98 40 40 00:00:16.280 READ DMA EXT
|
||||
25 00 00 00 40 00 00 04 ea 75 68 40 40 00:00:16.280 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc e8 40 40 00:00:16.150 READ DMA EXT
|
||||
|
||||
Error 24416 [15] occurred at disk power-on lifetime: 20155 hours (839 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 ec 2f 98 40 40 00:00:16.280 READ DMA EXT
|
||||
25 00 00 00 40 00 00 04 ea 75 68 40 40 00:00:16.280 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc e8 40 40 00:00:16.150 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc 68 40 40 00:00:16.130 READ DMA EXT
|
||||
25 00 00 00 30 00 00 05 c4 72 a8 40 40 00:00:16.080 READ DMA EXT
|
||||
|
||||
Error 24415 [14] occurred at disk power-on lifetime: 20155 hours (839 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 ec 2f 98 40 40 00:00:16.280 READ DMA EXT
|
||||
25 00 00 00 40 00 00 04 ea 75 68 40 40 00:00:16.280 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc e8 40 40 00:00:16.150 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc 68 40 40 00:00:16.130 READ DMA EXT
|
||||
25 00 00 00 30 00 00 05 c4 72 a8 40 40 00:00:16.080 READ DMA EXT
|
||||
|
||||
Error 24414 [13] occurred at disk power-on lifetime: 20155 hours (839 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 00:00:05.990 SET FEATURES [Disable SATA feature]
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:05.990 IDENTIFY DEVICE
|
||||
|
||||
Error 24413 [12] occurred at disk power-on lifetime: 19523 hours (813 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 31d+21:25:12.800 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 31d+21:25:12.800 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 04 ec 2f 98 40 40 31d+21:25:00.520 READ DMA EXT
|
||||
25 00 00 00 40 00 00 04 ea 75 68 40 40 31d+21:25:00.520 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 cb 09 60 40 40 31d+21:25:00.290 READ DMA EXT
|
||||
|
||||
Error 24412 [11] occurred at disk power-on lifetime: 19523 hours (813 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 ec 2f 98 40 40 31d+21:25:00.520 READ DMA EXT
|
||||
25 00 00 00 40 00 00 04 ea 75 68 40 40 31d+21:25:00.520 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 cb 09 60 40 40 31d+21:25:00.290 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc e8 40 40 31d+21:25:00.230 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc 68 40 40 31d+21:25:00.210 READ DMA EXT
|
||||
|
||||
Error 24411 [10] occurred at disk power-on lifetime: 19523 hours (813 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 ec 2f 98 40 40 31d+21:25:00.520 READ DMA EXT
|
||||
25 00 00 00 40 00 00 04 ea 75 68 40 40 31d+21:25:00.520 READ DMA EXT
|
||||
25 00 00 00 08 00 00 05 cb 09 60 40 40 31d+21:25:00.290 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc e8 40 40 31d+21:25:00.230 READ DMA EXT
|
||||
25 00 00 00 40 00 00 05 c3 fc 68 40 40 31d+21:25:00.210 READ DMA EXT
|
||||
|
||||
Error 24410 [9] occurred at disk power-on lifetime: 19523 hours (813 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 31d+21:24:51.090 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 31d+21:24:51.090 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 31d+21:24:49.710 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 31d+21:24:49.710 IDENTIFY DEVICE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 00 00 31d+21:24:49.710 FLUSH CACHE EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
172
SSD/SK hynix/HFS128/HFS128G39MND-3310A/4C7EA12702E5
Normal file
172
SSD/SK hynix/HFS128/HFS128G39MND-3310A/4C7EA12702E5
Normal file
@@ -0,0 +1,172 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: HFS128G39MND-3310A
|
||||
Serial Number: --
|
||||
Firmware Version: 20002P00
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri May 26 12:26:33 2023 PDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM level is: 254 (maximum performance)
|
||||
Rd look-ahead is: Unavailable
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 463) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x59) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 4398
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 4330
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 3241491
|
||||
170 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 22
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
173 Wear_Leveling_Count -O--CK 097 097 000 - 91
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 748
|
||||
177 Wear_Leveling_Count -O--CK 097 097 000 - 91
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 22
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1946
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 035 000 000 - 35 (Min/Max 17/64)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
|
||||
231 SSD_Life_Left PO--CK 253 253 010 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 11031
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 11031
|
||||
241 Total_Writes_GB -O--CK 100 100 --- - 5561
|
||||
242 Total_Reads_GB -O--CK 100 100 --- - 10455
|
||||
250 Read_Retry_Count -O--CK 100 100 --- - 39473
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
Warning! SMART Extended Self-test Log Structure (1/2) error: invalid SMART checksum.
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 3200 -
|
||||
# 2 Short offline Completed without error 00% 3198 -
|
||||
# 3 Short offline Completed without error 00% 3196 -
|
||||
# 4 Short offline Completed without error 00% 3189 -
|
||||
# 5 Short offline Completed without error 00% 3173 -
|
||||
# 6 Extended offline Completed without error 00% 3171 -
|
||||
# 7 Short offline Completed without error 00% 3163 -
|
||||
# 8 Short offline Completed without error 00% 3140 -
|
||||
# 9 Short offline Completed without error 00% 3117 -
|
||||
#10 Short offline Completed without error 00% 3094 -
|
||||
#11 Short offline Completed without error 00% 3070 -
|
||||
#12 Short offline Completed without error 00% 3059 -
|
||||
#13 Short offline Completed without error 00% 3058 -
|
||||
#14 Extended offline Completed without error 00% 3053 -
|
||||
#15 Short offline Completed without error 00% 3051 -
|
||||
#16 Short offline Completed without error 00% 3046 -
|
||||
#17 Short offline Completed without error 00% 3043 -
|
||||
#18 Short offline Completed without error 00% 3040 -
|
||||
#19 Short offline Completed without error 00% 1942 -
|
||||
#20 Short offline Completed without error 00% 1942 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 20 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
196
SSD/SK hynix/HFS128/HFS128G39TND-N210A/9D841482C1E6
Normal file
196
SSD/SK hynix/HFS128/HFS128G39TND-N210A/9D841482C1E6
Normal file
@@ -0,0 +1,196 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: HFS128G39TND-N210A
|
||||
Serial Number: --
|
||||
Firmware Version: 30001P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon May 27 22:04:25 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x000f 166 153 006 Pre-fail Always - 0
|
||||
5 Retired_Block_Count 0x0032 100 100 036 Old_age Always - 5
|
||||
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10282
|
||||
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1554
|
||||
100 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 27718900
|
||||
168 Min_Erase_Count 0x0032 023 023 000 Old_age Always - 817
|
||||
169 Max_Erase_Count 0x0032 017 017 000 Old_age Always - 885
|
||||
171 Program_Fail_Count 0x0032 253 253 000 Old_age Always - 0
|
||||
172 Erase_Fail_Count 0x0032 253 253 000 Old_age Always - 0
|
||||
174 Unexpect_Power_Loss_Ct 0x0030 100 100 000 Old_age Offline - 73
|
||||
175 Program_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot 0x0032 253 253 000 Old_age Always - 0
|
||||
177 Wear_Leveling_Count 0x0032 021 021 000 Old_age Always - 848
|
||||
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 208
|
||||
179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 431
|
||||
180 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 2209
|
||||
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 1326
|
||||
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1399
|
||||
188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
|
||||
194 Temperature_Celsius 0x0002 036 000 000 Old_age Always - 36 (Min/Max 10/53)
|
||||
195 Hardware_ECC_Recovered 0x0032 100 091 000 Old_age Always - 4311110
|
||||
196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 5
|
||||
198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 152
|
||||
199 UDMA_CRC_Error_Count 0x0032 253 253 000 Old_age Always - 0
|
||||
204 Soft_ECC_Correction 0x000e 003 001 000 Old_age Always - 8496
|
||||
212 Phy_Error_Count 0x0032 253 253 000 Old_age Always - 0
|
||||
234 Unknown_SK_hynix_Attrib 0x0032 100 100 000 Old_age Always - 117074
|
||||
241 Total_Writes_GB 0x0032 100 100 000 Old_age Always - 32892
|
||||
242 Total_Reads_GB 0x0032 100 100 000 Old_age Always - 3087
|
||||
250 Read_Retry_Count 0x0032 095 095 000 Old_age Always - 214854686
|
||||
|
||||
SMART Error Log Version: 1
|
||||
ATA Error Count: 181 (device log contains only the most recent five errors)
|
||||
CR = Command Register [HEX]
|
||||
FR = Features Register [HEX]
|
||||
SC = Sector Count Register [HEX]
|
||||
SN = Sector Number Register [HEX]
|
||||
CL = Cylinder Low Register [HEX]
|
||||
CH = Cylinder High Register [HEX]
|
||||
DH = Device/Head Register [HEX]
|
||||
DC = Device Command Register [HEX]
|
||||
ER = Error register [HEX]
|
||||
ST = Status register [HEX]
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 181 occurred at disk power-on lifetime: 10085 hours (420 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 20 e8 3c 9e 3d 40 40 01:28:14.740 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.730 READ LOG EXT
|
||||
60 20 e0 3c 9e 3d 40 40 01:28:14.710 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.710 READ LOG EXT
|
||||
60 20 d8 3c 9e 3d 40 40 01:28:14.690 READ FPDMA QUEUED
|
||||
|
||||
Error 180 occurred at disk power-on lifetime: 10085 hours (420 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 20 e0 3c 9e 3d 40 40 01:28:14.710 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.710 READ LOG EXT
|
||||
60 20 d8 3c 9e 3d 40 40 01:28:14.690 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.690 READ LOG EXT
|
||||
60 20 d0 3c 9e 3d 40 40 01:28:14.670 READ FPDMA QUEUED
|
||||
|
||||
Error 179 occurred at disk power-on lifetime: 10085 hours (420 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 20 d8 3c 9e 3d 40 40 01:28:14.690 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.690 READ LOG EXT
|
||||
60 20 d0 3c 9e 3d 40 40 01:28:14.670 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.670 READ LOG EXT
|
||||
60 20 c8 3c 9e 3d 40 40 01:28:14.650 READ FPDMA QUEUED
|
||||
|
||||
Error 178 occurred at disk power-on lifetime: 10085 hours (420 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 20 d0 3c 9e 3d 40 40 01:28:14.670 READ FPDMA QUEUED
|
||||
2f 00 01 10 00 00 00 00 01:28:14.670 READ LOG EXT
|
||||
60 20 c8 3c 9e 3d 40 40 01:28:14.650 READ FPDMA QUEUED
|
||||
61 20 c0 00 0a 25 40 40 01:28:13.810 WRITE FPDMA QUEUED
|
||||
61 20 b8 40 0f 25 40 40 01:28:13.810 WRITE FPDMA QUEUED
|
||||
|
||||
Error 177 occurred at disk power-on lifetime: 10085 hours (420 days + 5 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER ST SC SN CL CH DH
|
||||
-- -- -- -- -- -- --
|
||||
40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||||
60 20 c8 3c 9e 3d 40 40 01:28:14.650 READ FPDMA QUEUED
|
||||
61 20 c0 00 0a 25 40 40 01:28:13.810 WRITE FPDMA QUEUED
|
||||
61 20 b8 40 0f 25 40 40 01:28:13.810 WRITE FPDMA QUEUED
|
||||
61 20 b0 80 89 c2 40 40 01:28:13.590 WRITE FPDMA QUEUED
|
||||
61 20 a8 40 89 c2 40 40 01:28:13.590 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
The above only provides legacy SMART information - try 'smartctl -x' for more
|
||||
|
||||
|
||||
|
||||
203
SSD/SK hynix/HFS256/HFS256G32TNF-N3A0A/371798C7B805
Normal file
203
SSD/SK hynix/HFS256/HFS256G32TNF-N3A0A/371798C7B805
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: HFS256G32TNF-N3A0A
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Dec 14 19:50:02 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 086 086 000 - 12822
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 3625
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 1692976
|
||||
168 Min_Erase_Count -O--CK 099 099 000 - 29
|
||||
169 Max_Erase_Count -O--CK 095 095 000 - 93
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
173 Wear_Leveling_Count -O--CK 097 097 000 - 60
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 84
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count PO--CK 100 100 010 - 100
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 021 016 000 - 21 (Min/Max 16/40)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 15620
|
||||
233 Media_Wearout_Indicator PO--CK 097 097 001 - 97
|
||||
236 Unknown_SK_hynix_Attrib -O--CK 086 086 001 - 86
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 20594
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 21698
|
||||
249 NAND_Writes_GiB -O--CK 100 100 000 - 15915
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xdf GPL VS 1 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 21 Celsius
|
||||
Power Cycle Min/Max Temperature: 21/21 Celsius
|
||||
Lifetime Min/Max Temperature: 16/40 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 1/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (163)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 3625 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 12822 --- Power-on Hours
|
||||
0x01 0x018 6 40223379624 --- Logical Sectors Written
|
||||
0x01 0x020 6 567131368 --- Number of Write Commands
|
||||
0x01 0x028 6 42380628804 --- Logical Sectors Read
|
||||
0x01 0x030 6 695903952 --- Number of Read Commands
|
||||
0x01 0x038 6 1698975177135 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 21 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 40 --- Highest Temperature
|
||||
0x05 0x028 1 16 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 19 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 749550 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 17614 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
181
SSD/SK hynix/HFS256/HFS256G32TNH-73A0A/F39BF13E6832
Normal file
181
SSD/SK hynix/HFS256/HFS256G32TNH-73A0A/F39BF13E6832
Normal file
@@ -0,0 +1,181 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p8 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS256G32TNH-73A0A
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 90000Q00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Feb 19 20:25:16 2024 MSK
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 3749
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 2637
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 411910
|
||||
168 Unknown_Attribute -O--CK 100 100 000 - 2
|
||||
169 Unknown_Attribute -O--CK 099 099 000 - 58
|
||||
171 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
172 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 100 100 000 - 21
|
||||
174 Unknown_Attribute -O--CK 100 100 000 - 91
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O---K 100 100 010 - 469
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO---K 100 100 010 - 100
|
||||
184 End-to-End_Error -O-RCK 100 100 097 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 030 045 000 - 30 (Min/Max 5/45)
|
||||
195 Hardware_ECC_Recovered -OSR-- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
233 Media_Wearout_Indicator PO---K 100 100 001 - 100
|
||||
234 Unknown_Attribute -O--CK 100 100 000 - 36896
|
||||
236 Unknown_Attribute -O---K 098 098 001 - 98
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 6870
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 7245
|
||||
249 Unknown_Attribute -O--CK 100 100 000 - 5809
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xdf GPL VS 1 Device vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1538 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 2637 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3749 --- Power-on Hours
|
||||
0x01 0x018 6 13419899657 --- Logical Sectors Written
|
||||
0x01 0x020 6 173549017 --- Number of Write Commands
|
||||
0x01 0x028 6 14151722070 --- Logical Sectors Read
|
||||
0x01 0x030 6 196941306 --- Number of Read Commands
|
||||
0x01 0x038 6 1682260783051 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 30 --- Current Temperature
|
||||
0x05 0x010 1 30 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 45 --- Highest Temperature
|
||||
0x05 0x028 1 5 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 210820 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 20747 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
||||
299
SSD/SK hynix/HFS256/HFS256G39MND-2300A/7E869F6F9027
Normal file
299
SSD/SK hynix/HFS256/HFS256G39MND-2300A/7E869F6F9027
Normal file
@@ -0,0 +1,299 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS256G39MND-2300A
|
||||
Serial Number: --
|
||||
Firmware Version: 20200L00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Oct 16 05:33:59 2023
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x03) Offline data collection activity
|
||||
is in progress.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 249) Self-test routine in progress...
|
||||
90% of test remaining.
|
||||
Total time to complete Offline
|
||||
data collection: ( 557) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 17) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 4294
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 4180
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 4063492
|
||||
170 Unknown_Attribute -O--CK 100 100 000 - 69
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 499
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 098 098 000 - 61
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 24
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 4283
|
||||
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 18
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 035 000 000 - 35 (Min/Max 18/58)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 001 000 - 1441948616
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
212 Unknown_Attribute -O--CK 100 100 --- - 20471
|
||||
231 Unknown_SSD_Attribute PO--CK 253 253 --- - 0
|
||||
234 Unknown_Attribute -O--CK 100 100 --- - 15332
|
||||
241 Total_LBAs_Written -O--CK 100 100 --- - 13096
|
||||
242 Total_LBAs_Read -O--CK 100 100 --- - 12376
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 39
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 18547 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 18547 [6] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:04:17.820 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:04:17.820 NOP [Abort queued commands]
|
||||
25 00 00 00 e0 00 00 1d cf 26 20 40 40 00:04:12.760 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d cf 24 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d bf 12 20 40 40 00:04:12.750 READ DMA EXT
|
||||
|
||||
Error 18546 [5] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 e0 00 00 1d cf 26 20 40 40 00:04:12.760 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d cf 24 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d bf 12 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d bf 10 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 08 00 00 1d cf 27 f8 40 40 00:04:12.750 READ DMA EXT
|
||||
|
||||
Error 18545 [4] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 e0 00 00 1d cf 26 20 40 40 00:04:12.760 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d cf 24 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d bf 12 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 e0 00 00 1d bf 10 20 40 40 00:04:12.750 READ DMA EXT
|
||||
25 00 00 00 08 00 00 1d cf 27 f8 40 40 00:04:12.750 READ DMA EXT
|
||||
|
||||
Error 18544 [3] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:04:12.590 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:04:12.590 SECURITY FREEZE LOCK
|
||||
25 00 00 00 20 00 00 00 00 00 02 40 40 00:04:12.340 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 01 40 40 00:04:12.340 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 00 40 40 00:04:12.340 READ DMA EXT
|
||||
|
||||
Error 18543 [2] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 00:04:04.190 SET FEATURES [Disable SATA feature]
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:04.190 IDENTIFY DEVICE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 a0 00:04:01.410 FLUSH CACHE EXT
|
||||
60 00 08 00 c8 00 00 03 c7 14 7a 40 40 00:04:01.100 READ FPDMA QUEUED
|
||||
60 00 10 00 c0 00 00 04 5f 78 b2 40 40 00:04:01.100 READ FPDMA QUEUED
|
||||
|
||||
Error 18542 [1] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 a0 00:04:01.410 FLUSH CACHE EXT
|
||||
60 00 08 00 c8 00 00 03 c7 14 7a 40 40 00:04:01.100 READ FPDMA QUEUED
|
||||
60 00 10 00 c0 00 00 04 5f 78 b2 40 40 00:04:01.100 READ FPDMA QUEUED
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 a0 00:04:01.090 FLUSH CACHE EXT
|
||||
ea 00 00 00 00 00 00 00 00 00 00 a0 a0 00:04:01.090 FLUSH CACHE EXT
|
||||
|
||||
Error 18541 [0] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 a0 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 a0 a0 00:03:24.850 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 a0 a0 00:03:24.850 SECURITY FREEZE LOCK
|
||||
ef 00 90 00 06 00 00 00 00 00 00 a0 a0 00:03:24.850 SET FEATURES [Disable SATA feature]
|
||||
2f 00 00 00 01 00 00 00 00 00 04 e0 e0 00:03:24.810 READ LOG EXT
|
||||
2f 00 00 00 01 00 00 00 00 00 00 e0 e0 00:03:24.810 READ LOG EXT
|
||||
|
||||
Error 18540 [19] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
35 00 00 00 01 00 00 00 46 5f 2c 40 40 00:03:23.090 WRITE DMA EXT
|
||||
25 00 00 00 01 00 00 00 46 5f 2c 40 40 00:03:23.090 READ DMA EXT
|
||||
35 00 00 00 01 00 00 00 46 5f 43 40 40 00:03:23.090 WRITE DMA EXT
|
||||
35 00 00 00 01 00 00 00 46 5f 43 40 40 00:03:23.090 WRITE DMA EXT
|
||||
25 00 00 00 01 00 00 00 46 5f 43 40 40 00:03:23.090 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 1348 -
|
||||
# 2 Extended offline Interrupted (host reset) 30% 1324 -
|
||||
# 3 Extended offline Completed without error 00% 1213 -
|
||||
# 4 Extended offline Completed without error 00% 1192 -
|
||||
# 5 Extended offline Completed without error 00% 1182 -
|
||||
# 6 Extended offline Completed without error 00% 1149 -
|
||||
# 7 Extended offline Completed without error 00% 1125 -
|
||||
# 8 Extended offline Completed without error 00% 1089 -
|
||||
# 9 Extended offline Completed without error 00% 1050 -
|
||||
#10 Extended offline Completed without error 00% 998 -
|
||||
#11 Extended offline Completed without error 00% 969 -
|
||||
#12 Extended offline Completed without error 00% 865 -
|
||||
#13 Extended offline Interrupted (host reset) 80% 774 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
140
SSD/SK hynix/HFS256/HFS256G39TND-N210A/AF7A0B690227
Normal file
140
SSD/SK hynix/HFS256/HFS256G39TND-N210A/AF7A0B690227
Normal file
@@ -0,0 +1,140 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: HFS256G39TND-N210A
|
||||
Serial Number: --
|
||||
Firmware Version: 30001P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Dec 21 20:01:43 2023 EET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 225
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 88
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 621058
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 2
|
||||
169 Max_Erase_Count -O--CK 098 098 000 - 25
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 7
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 9
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 21
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 203
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 5237
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 1
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 12
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 048 000 000 - 48 (Min/Max 15/60)
|
||||
195 Hardware_ECC_Recovered -O--CK 098 065 000 - 119317230
|
||||
196 Reallocated_Event_Count -O--CK 253 100 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 5
|
||||
212 Phy_Error_Count -O--CK 253 253 000 - 0
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 2511
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 722
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 733
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 5265949
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
205
SSD/SK hynix/HFS256/HFS256G39TND-N210A/D6AD10D60CBB
Normal file
205
SSD/SK hynix/HFS256/HFS256G39TND-N210A/D6AD10D60CBB
Normal file
@@ -0,0 +1,205 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: HFS256G39TND-N210A
|
||||
Serial Number: --
|
||||
Firmware Version: 30200P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu May 23 14:23:47 2024 EEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 32) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 100 100 036 - 2
|
||||
9 Power_On_Hours -O--CK 093 093 000 - 6989
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 669
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 17503720
|
||||
168 Min_Erase_Count -O--CK 073 073 000 - 289
|
||||
169 Max_Erase_Count -O--CK 071 071 000 - 308
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 71
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 075 001 000 - 267
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 86
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 795
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 4645
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 122
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 152
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 035 022 000 - 35 (Min/Max 0/49)
|
||||
195 Hardware_ECC_Recovered -O--CK 098 020 000 - 93981573
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 2
|
||||
198 Offline_Uncorrectable -O--CK 100 100 000 - 16
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 7
|
||||
212 Phy_Error_Count -O--CK 253 253 000 - 0
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 73931
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 7324
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 7314
|
||||
250 Read_Retry_Count -O--CK 098 098 000 - 111787748
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 3
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 6475 hours (269 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 d8 00 00 00 67 e5 88 40 40 00:02:41.630 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 e0 e0 00:02:41.620 READ LOG EXT
|
||||
60 00 08 00 d0 00 00 00 67 e5 88 40 40 00:02:41.590 READ FPDMA QUEUED
|
||||
60 00 08 00 c8 00 00 00 67 e5 80 40 40 00:02:41.580 READ FPDMA QUEUED
|
||||
60 00 08 00 c0 00 00 00 67 e5 78 40 40 00:02:41.580 READ FPDMA QUEUED
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 6475 hours (269 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 d0 00 00 00 67 e5 88 40 40 00:02:41.590 READ FPDMA QUEUED
|
||||
60 00 08 00 c8 00 00 00 67 e5 80 40 40 00:02:41.580 READ FPDMA QUEUED
|
||||
60 00 08 00 c0 00 00 00 67 e5 78 40 40 00:02:41.580 READ FPDMA QUEUED
|
||||
60 00 08 00 b8 00 00 00 67 e5 70 40 40 00:02:41.580 READ FPDMA QUEUED
|
||||
60 00 08 00 b0 00 00 00 67 e5 68 40 40 00:02:41.580 READ FPDMA QUEUED
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 6474 hours (269 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 51 00 00 00 00 01 66 90 80 00 00 Error: UNC at LBA = 0x01669080 = 23498880
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 08 00 00 00 01 66 90 00 40 40 00:00:36.880 READ DMA EXT
|
||||
25 00 00 08 00 00 00 01 66 90 38 40 40 00:00:36.570 READ DMA EXT
|
||||
25 00 00 08 00 00 00 04 56 d8 c0 40 40 00:00:36.240 READ DMA EXT
|
||||
25 00 00 08 00 00 00 03 85 49 c0 40 40 00:00:35.350 READ DMA EXT
|
||||
25 00 00 08 00 00 00 04 51 e4 c0 40 40 00:00:34.780 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
204
SSD/SK hynix/HFS256/HFS256G39TNF-N3A0A/D44A624AE8A4
Normal file
204
SSD/SK hynix/HFS256/HFS256G39TNF-N3A0A/D44A624AE8A4
Normal file
@@ -0,0 +1,204 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS256G39TNF-N3A0A
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Dec 28 18:41:16 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x05) Offline data collection activity
|
||||
was aborted by an interrupting command from host.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 39) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 667) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 088 088 000 - 11275
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 2644
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 907279
|
||||
168 Unknown_Attribute -O--CK 100 100 000 - 9
|
||||
169 Unknown_Attribute -O--CK 097 097 000 - 65
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 322
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 099 001 000 - 32
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 777
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 035 014 000 - 35 (Min/Max 14/56)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 15
|
||||
212 Unknown_Attribute -O--CK 100 100 000 - 7259
|
||||
233 Media_Wearout_Indicator -O--CK 003 001 000 - 98
|
||||
234 Unknown_Attribute -O--CK 100 100 000 - 8314
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 10394
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 6923
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Interrupted (host reset) 70% 9287 -
|
||||
# 2 Short offline Aborted by host 70% 9287 -
|
||||
# 3 Short offline Completed without error 00% 9287 -
|
||||
# 4 Short offline Completed without error 00% 2 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 35 Celsius
|
||||
Power Cycle Min/Max Temperature: 21/36 Celsius
|
||||
Lifetime Min/Max Temperature: 14/56 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 17/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (49)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 2644 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11275 --- Power-on Hours
|
||||
0x01 0x018 6 20301855832 --- Logical Sectors Written
|
||||
0x01 0x020 6 245769704 --- Number of Write Commands
|
||||
0x01 0x028 6 13522839461 --- Logical Sectors Read
|
||||
0x01 0x030 6 223761423 --- Number of Read Commands
|
||||
0x01 0x038 6 1734834196496 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 35 --- Current Temperature
|
||||
0x05 0x010 1 35 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 56 --- Highest Temperature
|
||||
0x05 0x028 1 14 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 25 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 30 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 655230 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 13455 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
194
SSD/SK hynix/HFS480/HFS480G3H2X069N/BC43C26AB1EA
Normal file
194
SSD/SK hynix/HFS480/HFS480G3H2X069N/BC43C26AB1EA
Normal file
@@ -0,0 +1,194 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS480G3H2X069N
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Add. Product Id: DELL(tm)
|
||||
Firmware Version: DZ02
|
||||
User Capacity: 480,103,981,056 bytes [480 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jun 10 18:49:29 2024 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 1730) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
||||
9 Power_On_Hours -O--CK 094 094 000 - 5597
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 49
|
||||
13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 099 099 000 - 141
|
||||
175 Program_Fail_Count_Chip -O--CK 099 099 000 - 109
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 731
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 060 046 000 - 40 (Min/Max 25/54)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 18575
|
||||
235 Unknown_Attribute -O--CK 100 100 000 - 18575
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 56415
|
||||
245 Unknown_Attribute PO--CK 099 099 001 - 99
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
||||
0x16 GPL R/W 1 Out Of Band Management Control log
|
||||
0x2f GPL R/O 1 Set Sector Configuration
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
||||
0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
||||
0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 1 -
|
||||
# 2 Short offline Completed without error 00% 1 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 39/50 Celsius
|
||||
Lifetime Min/Max Temperature: 25/54 Celsius
|
||||
Specified Max Operating Temperature: 65 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
SMART Status: 0xc24f (PASSED)
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/65 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (182)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5597 --- Power-on Hours
|
||||
0x01 0x018 6 38956052326 --- Logical Sectors Written
|
||||
0x01 0x020 6 379874827 --- Number of Write Commands
|
||||
0x01 0x028 6 1009277846 --- Logical Sectors Read
|
||||
0x01 0x030 6 11671124 --- Number of Read Commands
|
||||
0x01 0x038 6 1716440358841 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 --- Current Temperature
|
||||
0x05 0x010 1 41 --- Average Short Term Temperature
|
||||
0x05 0x018 1 42 --- Average Long Term Temperature
|
||||
0x05 0x020 1 54 --- Highest Temperature
|
||||
0x05 0x028 1 25 --- Lowest Temperature
|
||||
0x05 0x030 1 48 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 36 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 44 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 40 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 249 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
|
||||
|
||||
192
SSD/SK hynix/HFS480/HFS480G3H2X069N/E7801CE0282E
Normal file
192
SSD/SK hynix/HFS480/HFS480G3H2X069N/E7801CE0282E
Normal file
@@ -0,0 +1,192 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS480G3H2X069N
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Add. Product Id: DELL(tm)
|
||||
Firmware Version: DZ02
|
||||
User Capacity: 480,103,981,056 bytes [480 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jun 10 18:49:29 2024 -03
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 1730) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
||||
9 Power_On_Hours -O--CK 094 094 000 - 5597
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 49
|
||||
13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 099 099 000 - 143
|
||||
175 Program_Fail_Count_Chip -O--CK 099 099 000 - 108
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 734
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 061 048 000 - 39 (Min/Max 23/52)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 18574
|
||||
235 Unknown_Attribute -O--CK 100 100 000 - 18574
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 55911
|
||||
245 Unknown_Attribute PO--CK 099 099 001 - 99
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
||||
0x16 GPL R/W 1 Out Of Band Management Control log
|
||||
0x2f GPL R/O 1 Set Sector Configuration
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
||||
0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
||||
0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Extended offline Completed without error 00% 1 -
|
||||
# 2 Short offline Completed without error 00% 1 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 39 Celsius
|
||||
Power Cycle Min/Max Temperature: 37/47 Celsius
|
||||
Lifetime Min/Max Temperature: 23/52 Celsius
|
||||
Specified Max Operating Temperature: 65 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
SMART Status: 0xc24f (PASSED)
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/65 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (165)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5597 --- Power-on Hours
|
||||
0x01 0x018 6 38953054133 --- Logical Sectors Written
|
||||
0x01 0x020 6 380113185 --- Number of Write Commands
|
||||
0x01 0x028 6 998184604 --- Logical Sectors Read
|
||||
0x01 0x030 6 11474214 --- Number of Read Commands
|
||||
0x01 0x038 6 1716440310041 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 39 --- Current Temperature
|
||||
0x05 0x010 1 40 --- Average Short Term Temperature
|
||||
0x05 0x018 1 41 --- Average Long Term Temperature
|
||||
0x05 0x020 1 52 --- Highest Temperature
|
||||
0x05 0x028 1 23 --- Lowest Temperature
|
||||
0x05 0x030 1 45 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 34 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 43 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 249 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
194
SSD/SK hynix/HFS960/HFS960G32MED-3410A/9982AFC56742
Normal file
194
SSD/SK hynix/HFS960/HFS960G32MED-3410A/9982AFC56742
Normal file
@@ -0,0 +1,194 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS960G32MED-3410A
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 20035P00
|
||||
User Capacity: 960,197,124,096 bytes [960 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Dec 14 00:22:32 2023 KST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Write SCT (Get) Feature Control Command failed: Input/output error
|
||||
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
SCT capabilities: (0x0035) SCT Status supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 053 053 000 - 42018
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 157
|
||||
171 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
172 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 129
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 6879616
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 32
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 649
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 100 100 006 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 049 047 000 - 51 (Min/Max 19/53)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 002 000 - 5
|
||||
231 Unknown_SSD_Attribute PO--CK 100 100 001 - 100
|
||||
234 Unknown_Attribute -O--CK 100 100 000 - 27169
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 16122
|
||||
242 Total_LBAs_Read -O--CK 100 100 000 - 187027
|
||||
245 Unknown_Attribute PO--CK 100 100 001 - 100
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 000 - 425
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 51 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/52 Celsius
|
||||
Lifetime Min/Max Temperature: 1/66 Celsius
|
||||
Specified Max Operating Temperature: 70 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/70 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 478 (470)
|
||||
|
||||
SCT Error Recovery Control command not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 157 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 42018 --- Power-on Hours
|
||||
0x01 0x018 6 33810623684 --- Logical Sectors Written
|
||||
0x01 0x020 6 155178088 --- Number of Write Commands
|
||||
0x01 0x028 6 392225800857 --- Logical Sectors Read
|
||||
0x01 0x030 6 1027970197 --- Number of Read Commands
|
||||
0x01 0x038 6 940944640 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 51 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 66 --- Highest Temperature
|
||||
0x05 0x028 1 1 --- Lowest Temperature
|
||||
0x05 0x030 1 51 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 19 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 26 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 19 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 78690 --- Number of Hardware Resets
|
||||
0x06 0x018 4 1 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
194
SSD/SK hynix/HFS960/HFS960G3H2X069N/0E3061D0EED1
Normal file
194
SSD/SK hynix/HFS960/HFS960G3H2X069N/0E3061D0EED1
Normal file
@@ -0,0 +1,194 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS960G3H2X069N
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Add. Product Id: DELL(tm)
|
||||
Firmware Version: DZ02
|
||||
User Capacity: 960,197,124,096 bytes [960 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Aug 3 13:17:14 2023 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 60
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 46
|
||||
13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 1463
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 067 061 000 - 33 (Min/Max 23/39)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 93
|
||||
235 Unknown_Attribute -O--CK 100 100 000 - 93
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 105
|
||||
245 Unknown_Attribute PO--CK 100 100 001 - 100
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
||||
0x16 GPL R/W 1 Out Of Band Management Control log
|
||||
0x2f GPL - 1 Set Sector Configuration
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
||||
0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
||||
0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 56 -
|
||||
# 2 Short offline Completed without error 00% 15 -
|
||||
# 3 Extended offline Completed without error 00% 10 -
|
||||
# 4 Short offline Completed without error 00% 9 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 32/35 Celsius
|
||||
Lifetime Min/Max Temperature: 23/39 Celsius
|
||||
Specified Max Operating Temperature: 65 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
SMART Status: 0xc24f (PASSED)
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/65 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (37)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 46 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 60 --- Power-on Hours
|
||||
0x01 0x018 6 196125534 --- Logical Sectors Written
|
||||
0x01 0x020 6 841722 --- Number of Write Commands
|
||||
0x01 0x028 6 379722380 --- Logical Sectors Read
|
||||
0x01 0x030 6 1481880 --- Number of Read Commands
|
||||
0x01 0x038 6 1690500083252 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 28 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 39 --- Highest Temperature
|
||||
0x05 0x028 1 23 --- Lowest Temperature
|
||||
0x05 0x030 1 38 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 27 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 38 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 494 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
195
SSD/SK hynix/HFS960/HFS960G3H2X069N/4C7466CAB1FE
Normal file
195
SSD/SK hynix/HFS960/HFS960G3H2X069N/4C7466CAB1FE
Normal file
@@ -0,0 +1,195 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS960G3H2X069N
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Add. Product Id: DELL(tm)
|
||||
Firmware Version: DZ02
|
||||
User Capacity: 960,197,124,096 bytes [960 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Aug 3 13:17:14 2023 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 23
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 30
|
||||
13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 100 100 000 - 1
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 1
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 1446
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 066 055 000 - 34 (Min/Max 20/45)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 898
|
||||
235 Unknown_Attribute -O--CK 100 100 000 - 898
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 927
|
||||
245 Unknown_Attribute PO--CK 100 100 001 - 100
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
||||
0x16 GPL R/W 1 Out Of Band Management Control log
|
||||
0x2f GPL - 1 Set Sector Configuration
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
||||
0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
||||
0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 19 -
|
||||
# 2 Extended offline Completed without error 00% 2 -
|
||||
# 3 Short offline Completed without error 00% 1 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 34 Celsius
|
||||
Power Cycle Min/Max Temperature: 33/36 Celsius
|
||||
Lifetime Min/Max Temperature: 20/45 Celsius
|
||||
Specified Max Operating Temperature: 65 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
SMART Status: 0xc24f (PASSED)
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/65 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (21)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 30 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 23 --- Power-on Hours
|
||||
0x01 0x018 6 1883253774 --- Logical Sectors Written
|
||||
0x01 0x020 6 3761946 --- Number of Write Commands
|
||||
0x01 0x028 6 467443565 --- Logical Sectors Read
|
||||
0x01 0x030 6 2568459 --- Number of Read Commands
|
||||
0x01 0x038 6 1690500083262 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 34 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 45 --- Highest Temperature
|
||||
0x05 0x028 1 20 --- Lowest Temperature
|
||||
0x05 0x030 1 39 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 39 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 39 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 39 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 79 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
|
||||
|
||||
196
SSD/SK hynix/HFS960/HFS960G3H2X069N/9C012BF9F3FF
Normal file
196
SSD/SK hynix/HFS960/HFS960G3H2X069N/9C012BF9F3FF
Normal file
@@ -0,0 +1,196 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS960G3H2X069N
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Add. Product Id: DELL(tm)
|
||||
Firmware Version: DZ02
|
||||
User Capacity: 960,197,124,096 bytes [960 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Aug 3 13:17:15 2023 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 60
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 41
|
||||
13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 1453
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 067 061 000 - 33 (Min/Max 23/39)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 93
|
||||
235 Unknown_Attribute -O--CK 100 100 000 - 93
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 111
|
||||
245 Unknown_Attribute PO--CK 100 100 001 - 100
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
||||
0x16 GPL R/W 1 Out Of Band Management Control log
|
||||
0x2f GPL - 1 Set Sector Configuration
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
||||
0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
||||
0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 56 -
|
||||
# 2 Short offline Completed without error 00% 12 -
|
||||
# 3 Extended offline Completed without error 00% 3 -
|
||||
# 4 Short offline Completed without error 00% 3 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/34 Celsius
|
||||
Lifetime Min/Max Temperature: 23/39 Celsius
|
||||
Specified Max Operating Temperature: 65 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
SMART Status: 0xc24f (PASSED)
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/65 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (136)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 41 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 60 --- Power-on Hours
|
||||
0x01 0x018 6 196023810 --- Logical Sectors Written
|
||||
0x01 0x020 6 833886 --- Number of Write Commands
|
||||
0x01 0x028 6 379760748 --- Logical Sectors Read
|
||||
0x01 0x030 6 1482290 --- Number of Read Commands
|
||||
0x01 0x038 6 1690499771998 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 28 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 39 --- Highest Temperature
|
||||
0x05 0x028 1 23 --- Lowest Temperature
|
||||
0x05 0x030 1 38 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 28 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 38 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 457 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
|
||||
|
||||
194
SSD/SK hynix/HFS960/HFS960G3H2X069N/A1C4C6800AAA
Normal file
194
SSD/SK hynix/HFS960/HFS960G3H2X069N/A1C4C6800AAA
Normal file
@@ -0,0 +1,194 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: HFS960G3H2X069N
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Add. Product Id: DELL(tm)
|
||||
Firmware Version: DZ02
|
||||
User Capacity: 960,197,124,096 bytes [960 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-4 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Aug 3 13:17:15 2023 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Unavailable
|
||||
Wt Cache Reorder: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 30) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 60
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 41
|
||||
13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
||||
173 Unknown_Attribute -O--CK 100 100 000 - 0
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 1461
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 068 061 000 - 32 (Min/Max 23/39)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
||||
201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
||||
233 Media_Wearout_Indicator -O--CK 100 100 000 - 93
|
||||
235 Unknown_Attribute -O--CK 100 100 000 - 93
|
||||
241 Total_LBAs_Written -O--CK 100 100 000 - 111
|
||||
245 Unknown_Attribute PO--CK 100 100 001 - 100
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
||||
0x16 GPL R/W 1 Out Of Band Management Control log
|
||||
0x2f GPL - 1 Set Sector Configuration
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
||||
0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
||||
0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 56 -
|
||||
# 2 Short offline Completed without error 00% 16 -
|
||||
# 3 Extended offline Completed without error 00% 4 -
|
||||
# 4 Short offline Completed without error 00% 3 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 32 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/34 Celsius
|
||||
Lifetime Min/Max Temperature: 23/39 Celsius
|
||||
Specified Max Operating Temperature: 65 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
SMART Status: 0xc24f (PASSED)
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/65 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (146)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 41 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 60 --- Power-on Hours
|
||||
0x01 0x018 6 196015079 --- Logical Sectors Written
|
||||
0x01 0x020 6 833924 --- Number of Write Commands
|
||||
0x01 0x028 6 379711760 --- Logical Sectors Read
|
||||
0x01 0x030 6 1481335 --- Number of Read Commands
|
||||
0x01 0x038 6 1690499771968 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 32 --- Current Temperature
|
||||
0x05 0x010 1 28 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 39 --- Highest Temperature
|
||||
0x05 0x028 1 23 --- Lowest Temperature
|
||||
0x05 0x030 1 38 --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 27 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 38 --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 38 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 459 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0003 2 0 R_ERR response for device-to-host data FIS
|
||||
0x0004 2 0 R_ERR response for host-to-device data FIS
|
||||
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 2 0 CRC errors within host-to-device FIS
|
||||
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
||||
|
||||
291
SSD/SK hynix/SC210/SC210 2.5 7MM 128GB/6FF7A1E69A42
Normal file
291
SSD/SK hynix/SC210/SC210 2.5 7MM 128GB/6FF7A1E69A42
Normal file
@@ -0,0 +1,291 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC210 2.5 7MM 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20001L00
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue May 7 21:44:41 2024 PDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 6) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 8) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 051 051 000 - 43875
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 94
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 11058853
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 61
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 089 089 000 - 334
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 52
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 97
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1903
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 53
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 025 000 000 - 25 (Min/Max 16/36)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 186288234
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
231 SSD_Life_Left PO--CK 099 099 --- - 2
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 42404
|
||||
241 Total_Writes_GB -O--CK 100 100 --- - 37585
|
||||
242 Total_Reads_GB -O--CK 100 100 --- - 4707
|
||||
250 Read_Retry_Count -O--CK 100 100 --- - 405
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 2532 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2532 [11] occurred at disk power-on lifetime: 43683 hours (1820 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:23.750 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:23.750 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 04 fe a2 f0 40 40 9d+04:22:21.320 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d c8 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d a8 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
|
||||
Error 2531 [10] occurred at disk power-on lifetime: 43683 hours (1820 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 fe a2 f0 40 40 9d+04:22:21.320 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d c8 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d a8 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d 88 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d 68 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
|
||||
Error 2530 [9] occurred at disk power-on lifetime: 43683 hours (1820 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 fe a2 f0 40 40 9d+04:22:21.320 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d c8 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d a8 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d 88 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 15 5d 68 40 40 9d+04:22:21.310 READ DMA EXT
|
||||
|
||||
Error 2529 [8] occurred at disk power-on lifetime: 43683 hours (1820 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:09.470 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:09.470 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:09.320 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:09.170 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 9d+04:22:09.170 IDENTIFY DEVICE
|
||||
|
||||
Error 2528 [7] occurred at disk power-on lifetime: 43683 hours (1820 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 9d+04:22:03.180 SET FEATURES [Disable SATA feature]
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 9d+04:22:02.310 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 9d+04:22:02.310 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 9d+04:22:02.110 FLUSH CACHE EXT
|
||||
61 00 08 00 d8 00 00 00 06 44 a8 40 40 9d+04:22:02.110 WRITE FPDMA QUEUED
|
||||
|
||||
Error 2527 [6] occurred at disk power-on lifetime: 43683 hours (1820 days + 3 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 9d+04:22:03.180 SET FEATURES [Disable SATA feature]
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 9d+04:22:02.310 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 9d+04:22:02.310 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 9d+04:22:02.110 FLUSH CACHE EXT
|
||||
61 00 08 00 d8 00 00 00 06 44 a8 40 40 9d+04:22:02.110 WRITE FPDMA QUEUED
|
||||
|
||||
Error 2526 [5] occurred at disk power-on lifetime: 43463 hours (1810 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:16.090 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:16.090 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 04 fe a2 f0 40 40 00:00:13.660 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 29 74 c8 40 40 00:00:13.660 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 29 74 a8 40 40 00:00:13.660 READ DMA EXT
|
||||
|
||||
Error 2525 [4] occurred at disk power-on lifetime: 43463 hours (1810 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 04 fe a2 f0 40 40 00:00:13.660 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 29 74 c8 40 40 00:00:13.660 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 29 74 a8 40 40 00:00:13.660 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 29 74 88 40 40 00:00:13.660 READ DMA EXT
|
||||
25 00 00 00 20 00 00 04 29 74 68 40 40 00:00:13.660 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 217 -
|
||||
# 2 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
140
SSD/SK hynix/SC210/SC210 mSATA 128GB/11E0A320848A
Normal file
140
SSD/SK hynix/SC210/SC210 mSATA 128GB/11E0A320848A
Normal file
@@ -0,0 +1,140 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC210 mSATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20001L00
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: mSATA
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jul 11 23:35:08 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 3) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 8) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 090 090 000 - 9219
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1287
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 1704715
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 268
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 099 099 000 - 53
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 20
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 69
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1931
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 100 100 000 - 37
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 1294
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 051 000 000 - 51 (0 2 0 127 0)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 099 000 - 6726928
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
231 SSD_Life_Left PO--CK 253 253 --- - 0
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 6511
|
||||
241 Total_Writes_GB -O--CK 100 100 --- - 4304
|
||||
242 Total_Reads_GB -O--CK 100 100 --- - 4150
|
||||
250 Read_Retry_Count -O--CK 100 100 --- - 4169
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 8 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 28 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
315
SSD/SK hynix/SC210/SC210 mSATA 256GB/D40B308AFC68
Normal file
315
SSD/SK hynix/SC210/SC210 mSATA 256GB/D40B308AFC68
Normal file
@@ -0,0 +1,315 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC210 mSATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20001L00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: mSATA
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Jun 2 08:58:36 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 5) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 17) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 091 091 000 - 8664
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 5646
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 5396116
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 3114
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 098 098 000 - 83
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 44
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 401
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 3951
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 538
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 041 000 000 - 41 (Min/Max 1/56)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 001 000 - 106828805
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
231 SSD_Life_Left PO--CK 253 253 --- - 0
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 18980
|
||||
241 Total_Writes_GB -O--CK 100 100 --- - 14017
|
||||
242 Total_Reads_GB -O--CK 100 100 --- - 27405
|
||||
250 Read_Retry_Count -O--CK 100 100 --- - 1305
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 18893 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 18893 [12] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:16.310 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:16.310 NOP [Abort queued commands]
|
||||
25 00 00 00 38 00 00 02 54 89 b0 40 40 00:00:09.930 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 57 48 d0 40 40 00:00:09.930 READ DMA EXT
|
||||
25 00 00 00 18 00 00 02 53 fc f0 40 40 00:00:09.910 READ DMA EXT
|
||||
|
||||
Error 18892 [11] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 38 00 00 02 54 89 b0 40 40 00:00:09.930 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 57 48 d0 40 40 00:00:09.930 READ DMA EXT
|
||||
25 00 00 00 18 00 00 02 53 fc f0 40 40 00:00:09.910 READ DMA EXT
|
||||
25 00 00 00 88 00 00 02 53 fd 08 40 40 00:00:09.910 READ DMA EXT
|
||||
25 00 00 00 08 00 00 02 54 83 e0 40 40 00:00:09.910 READ DMA EXT
|
||||
|
||||
Error 18891 [10] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 38 00 00 02 54 89 b0 40 40 00:00:09.930 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 57 48 d0 40 40 00:00:09.930 READ DMA EXT
|
||||
25 00 00 00 18 00 00 02 53 fc f0 40 40 00:00:09.910 READ DMA EXT
|
||||
25 00 00 00 88 00 00 02 53 fd 08 40 40 00:00:09.910 READ DMA EXT
|
||||
25 00 00 00 08 00 00 02 54 83 e0 40 40 00:00:09.910 READ DMA EXT
|
||||
|
||||
Error 18890 [9] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:00:02.310 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:02.290 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:02.270 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:02.270 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.170 IDENTIFY DEVICE
|
||||
|
||||
Error 18889 [8] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:33.570 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:33.570 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 03 57 4b 10 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 16 01 28 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 30 00 00 03 d6 6e c8 40 40 00:00:27.250 READ DMA EXT
|
||||
|
||||
Error 18888 [7] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 03 57 4b 10 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 16 01 28 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 30 00 00 03 d6 6e c8 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 60 00 00 03 d6 6e f8 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 d6 6f 58 40 40 00:00:27.250 READ DMA EXT
|
||||
|
||||
Error 18887 [6] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 03 57 4b 10 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 16 01 28 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 30 00 00 03 d6 6e c8 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 60 00 00 03 d6 6e f8 40 40 00:00:27.250 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 d6 6f 58 40 40 00:00:27.250 READ DMA EXT
|
||||
|
||||
Error 18886 [5] occurred at disk power-on lifetime: 8663 hours (360 days + 23 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.700 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.700 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 03 48 48 28 40 40 00:00:09.710 READ DMA EXT
|
||||
25 00 00 00 03 00 00 03 48 4b 30 40 40 00:00:09.710 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 d7 cd 78 40 40 00:00:09.710 READ DMA EXT
|
||||
|
||||
Warning! SMART Extended Self-test Log Structure (1/2) error: invalid SMART checksum.
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 8663 -
|
||||
# 2 Short offline Completed without error 00% 8609 -
|
||||
# 3 Short offline Completed without error 00% 8584 -
|
||||
# 4 Short offline Completed without error 00% 8583 -
|
||||
# 5 Short offline Completed without error 00% 8571 -
|
||||
# 6 Short offline Completed without error 00% 8570 -
|
||||
# 7 Short offline Completed without error 00% 8570 -
|
||||
# 8 Short offline Completed without error 00% 8570 -
|
||||
# 9 Short offline Completed without error 00% 8560 -
|
||||
#10 Short offline Completed without error 00% 8551 -
|
||||
#11 Short offline Completed without error 00% 8547 -
|
||||
#12 Short offline Completed without error 00% 8535 -
|
||||
#13 Short offline Completed without error 00% 8534 -
|
||||
#14 Short offline Completed without error 00% 8534 -
|
||||
#15 Short offline Completed without error 00% 8521 -
|
||||
#16 Short offline Completed without error 00% 8511 -
|
||||
#17 Short offline Completed without error 00% 8459 -
|
||||
#18 Short offline Completed without error 00% 8449 -
|
||||
#19 Short offline Completed without error 00% 8388 -
|
||||
#20 Short offline Completed without error 00% 8210 -
|
||||
#21 Short offline Completed without error 00% 8058 -
|
||||
#22 Short offline Completed without error 00% 8039 -
|
||||
#23 Short offline Completed without error 00% 8039 -
|
||||
#24 Short offline Completed without error 00% 7972 -
|
||||
#25 Short offline Completed without error 00% 7212 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
141
SSD/SK hynix/SC215/SC215 M.2 2242 32GB/C126835EEB56
Normal file
141
SSD/SK hynix/SC215/SC215 M.2 2242 32GB/C126835EEB56
Normal file
@@ -0,0 +1,141 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: SK hynix SC215 M.2 2242 32GB
|
||||
Serial Number: --
|
||||
Firmware Version: 50001L00
|
||||
User Capacity: 32,017,047,552 bytes [32.0 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Jul 16 07:34:26 2023 +08
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 2) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 070 070 000 - 27362
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 164
|
||||
100 Unknown_Attribute -O--CK 100 100 000 - 9573271
|
||||
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
||||
174 Unknown_Attribute ----CK 100 100 000 - 139
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 061 061 000 - 1206
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 5
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 6
|
||||
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 330
|
||||
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 161
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 052 000 000 - 52 (Min/Max 21/52)
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 108020315
|
||||
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
||||
231 Unknown_SSD_Attribute PO--CK 092 092 --- - 9
|
||||
234 Unknown_Attribute -O--CK 100 100 --- - 37224
|
||||
241 Total_LBAs_Written -O--CK 100 100 --- - 35453
|
||||
242 Total_LBAs_Read -O--CK 100 100 --- - 8292
|
||||
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 576
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 2 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3 -
|
||||
# 2 Short offline Completed without error 00% 1 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
208
SSD/SK hynix/SC300/SC300 2.5 7MM 256GB/BBC51A107D4F
Normal file
208
SSD/SK hynix/SC300/SC300 2.5 7MM 256GB/BBC51A107D4F
Normal file
@@ -0,0 +1,208 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC300 2.5 7MM 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20100P00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Dec 10 14:23:12 2024 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 047 047 000 - 47044
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 93
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 23808672
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 59
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 089 089 000 - 361
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 64
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 349
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 3939
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 036 000 000 - 36 (Min/Max 19/67)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
|
||||
231 SSD_Life_Left PO--CK 099 099 010 - 2
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 91755
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 30497
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 11846
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 2286
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 2 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 3
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 3 [2] occurred at disk power-on lifetime: 31174 hours (1298 days + 22 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:10.800 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:10.800 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:10.780 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:10.780 IDENTIFY DEVICE
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:00:07.870 SECURITY FREEZE LOCK
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 31173 hours (1298 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:05.470 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:05.470 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:05.470 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:05.470 IDENTIFY DEVICE
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:00:03.570 SECURITY FREEZE LOCK
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:13.970 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:13.970 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:13.970 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:13.970 IDENTIFY DEVICE
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:00:12.220 SECURITY FREEZE LOCK
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 31174 -
|
||||
# 2 Short offline Interrupted (host reset) 60% 2 -
|
||||
# 3 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
303
SSD/SK hynix/SC300/SC300 M.2 2280 128GB/9B92DE4725FA
Normal file
303
SSD/SK hynix/SC300/SC300 M.2 2280 128GB/9B92DE4725FA
Normal file
@@ -0,0 +1,303 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC300 M.2 2280 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20100P00
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Dec 8 12:52:45 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 4) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x59) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 5214
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 910
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 8011356
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 47
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 092 092 000 - 245
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 35
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 76
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1892
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 047 000 000 - 47 (Min/Max 13/69)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
|
||||
231 SSD_Life_Left PO--CK 253 253 010 - 1
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 31220
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 7963
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 22101
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 2
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 1820 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1820 [19] occurred at disk power-on lifetime: 5172 hours (215 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.270 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.270 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.270 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.270 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 00:00:15.410 READ DMA EXT
|
||||
|
||||
Error 1819 [18] occurred at disk power-on lifetime: 5172 hours (215 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.270 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.270 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 90 00 00 02 90 7f 68 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 38 00 00 02 90 7f a8 40 40 00:00:15.410 READ DMA EXT
|
||||
|
||||
Error 1818 [17] occurred at disk power-on lifetime: 5172 hours (215 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 90 00 00 02 90 7f 68 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 38 00 00 02 90 7f a8 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 65 96 98 40 40 00:00:15.400 READ DMA EXT
|
||||
25 00 00 00 40 00 00 03 63 d3 68 40 40 00:00:15.400 READ DMA EXT
|
||||
|
||||
Error 1817 [16] occurred at disk power-on lifetime: 5172 hours (215 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 90 00 00 02 90 7f 68 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 38 00 00 02 90 7f a8 40 40 00:00:15.410 READ DMA EXT
|
||||
25 00 00 00 08 00 00 03 65 96 98 40 40 00:00:15.400 READ DMA EXT
|
||||
25 00 00 00 40 00 00 03 63 d3 68 40 40 00:00:15.400 READ DMA EXT
|
||||
|
||||
Error 1816 [15] occurred at disk power-on lifetime: 5035 hours (209 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:36:48.840 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:36:48.840 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:36:48.840 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:36:48.840 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 01:36:45.180 READ DMA EXT
|
||||
|
||||
Error 1815 [14] occurred at disk power-on lifetime: 5035 hours (209 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:36:48.840 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 01:36:48.840 NOP [Abort queued commands]
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 01:36:45.180 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 40 40 40 01:36:45.050 READ DMA EXT
|
||||
25 00 00 02 00 00 00 02 90 00 68 40 40 01:36:45.010 READ DMA EXT
|
||||
|
||||
Error 1814 [13] occurred at disk power-on lifetime: 5035 hours (209 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 01:36:45.180 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 40 40 40 01:36:45.050 READ DMA EXT
|
||||
25 00 00 02 00 00 00 02 90 00 68 40 40 01:36:45.010 READ DMA EXT
|
||||
25 00 00 00 40 00 00 02 90 00 28 40 40 01:36:45.010 READ DMA EXT
|
||||
25 00 00 00 08 00 00 02 92 31 90 40 40 01:36:44.840 READ DMA EXT
|
||||
|
||||
Error 1813 [12] occurred at disk power-on lifetime: 5035 hours (209 days + 19 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 08 00 00 03 65 97 80 40 40 01:36:45.180 READ DMA EXT
|
||||
25 00 00 00 01 00 00 00 00 00 40 40 40 01:36:45.050 READ DMA EXT
|
||||
25 00 00 02 00 00 00 02 90 00 68 40 40 01:36:45.010 READ DMA EXT
|
||||
25 00 00 00 40 00 00 02 90 00 28 40 40 01:36:45.010 READ DMA EXT
|
||||
25 00 00 00 08 00 00 02 92 31 90 40 40 01:36:44.840 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
303
SSD/SK hynix/SC300/SC300 M.2 2280 128GB/AFBE8014C5BE
Normal file
303
SSD/SK hynix/SC300/SC300 M.2 2280 128GB/AFBE8014C5BE
Normal file
@@ -0,0 +1,303 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC300 M.2 2280 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20100P00
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Dec 9 12:44:49 2023 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x59) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 064 064 000 - 32525
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 151
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 7399559
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 92
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 093 093 000 - 226
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 23
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 111
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1857
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 031 000 000 - 31 (Min/Max 19/70)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
|
||||
231 SSD_Life_Left PO--CK 253 253 010 - 1
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 28506
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 4312
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 5910
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 28
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 2519 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2519 [18] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:57.250 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:57.250 NOP [Abort queued commands]
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:44.720 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:44.720 IDENTIFY DEVICE
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:43.580 SECURITY FREEZE LOCK
|
||||
|
||||
Error 2518 [17] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:44.720 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:44.720 IDENTIFY DEVICE
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:43.580 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:43.420 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:42.550 IDENTIFY DEVICE
|
||||
|
||||
Error 2517 [16] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:44.720 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:44.720 IDENTIFY DEVICE
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:43.580 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:43.420 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:42.550 IDENTIFY DEVICE
|
||||
|
||||
Error 2516 [15] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.930 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.930 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.600 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.280 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.280 IDENTIFY DEVICE
|
||||
|
||||
Error 2515 [14] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.930 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.930 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.600 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.280 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.280 IDENTIFY DEVICE
|
||||
|
||||
Error 2514 [13] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 10 00 06 00 00 00 00 00 00 00 00 2d+19:30:39.050 SET FEATURES [Enable SATA feature]
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 2d+19:30:39.000 SET FEATURES [Disable SATA feature]
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.000 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:39.000 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:38.850 IDENTIFY DEVICE
|
||||
|
||||
Error 2513 [12] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 2d+19:30:38.840 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:38.840 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:38.800 IDENTIFY DEVICE
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+19:30:38.800 IDENTIFY DEVICE
|
||||
ef 00 03 00 45 00 00 00 00 00 00 00 00 2d+19:30:38.800 SET FEATURES [Set transfer mode]
|
||||
|
||||
Error 2512 [11] occurred at disk power-on lifetime: 32051 hours (1335 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 2d+19:30:31.590 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 2d+19:30:31.590 CHECK POWER MODE
|
||||
60 00 01 00 88 00 00 0e e7 c2 af 40 40 1d+18:19:03.250 READ FPDMA QUEUED
|
||||
60 00 01 00 80 00 00 00 00 00 00 40 40 1d+18:19:03.250 READ FPDMA QUEUED
|
||||
60 00 01 00 78 00 00 0e e7 c2 af 40 40 1d+18:19:03.250 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 54 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
304
SSD/SK hynix/SC300/SC300 M.2 2280 256GB/3B1E4AA637AF
Normal file
304
SSD/SK hynix/SC300/SC300 M.2 2280 256GB/3B1E4AA637AF
Normal file
@@ -0,0 +1,304 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC300 M.2 2280 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20100P00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Dec 14 20:20:24 2024 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 5) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x59) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 052 052 000 - 43018
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 3814
|
||||
100 Total_Erase_Count -O--CK 100 099 000 - 58234794
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 198
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 071 071 000 - 894
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 19
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 128
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 4128
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 039 000 000 - 39 (Min/Max 12/69)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 000 - 1
|
||||
231 SSD_Life_Left PO--CK 094 094 010 - 7
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 226899
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 33698
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 31585
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 13147
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 9718 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 9718 [17] occurred at disk power-on lifetime: 42997 hours (1791 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 5d+15:44:02.790 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 5d+15:44:02.790 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 5d+15:44:02.790 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 5d+15:44:02.790 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 50 b2 48 40 40 5d+15:43:58.080 READ DMA EXT
|
||||
|
||||
Error 9717 [16] occurred at disk power-on lifetime: 42997 hours (1791 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 5d+15:44:02.790 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 5d+15:44:02.790 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 50 b2 48 40 40 5d+15:43:58.080 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb b4 90 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb b2 c0 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
|
||||
Error 9716 [15] occurred at disk power-on lifetime: 42997 hours (1791 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 50 b2 48 40 40 5d+15:43:58.080 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb b4 90 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb b2 c0 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb bc 68 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 10 00 00 10 0a f6 a8 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
|
||||
Error 9715 [14] occurred at disk power-on lifetime: 42997 hours (1791 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 00 00 01 00 00 01 50 b2 48 40 40 5d+15:43:58.080 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb b4 90 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb b2 c0 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 08 00 00 10 eb bc 68 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
25 00 00 00 10 00 00 10 0a f6 a8 40 40 5d+15:43:58.060 READ DMA EXT
|
||||
|
||||
Error 9714 [13] occurred at disk power-on lifetime: 42997 hours (1791 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 5d+15:43:43.810 SET FEATURES [Disable SATA feature]
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 5d+15:43:43.730 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 5d+15:43:43.730 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 5d+15:43:43.180 FLUSH CACHE EXT
|
||||
61 00 08 00 b8 00 00 00 00 00 29 40 40 5d+15:43:42.750 WRITE FPDMA QUEUED
|
||||
|
||||
Error 9713 [12] occurred at disk power-on lifetime: 42997 hours (1791 days + 13 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ef 00 90 00 06 00 00 00 00 00 00 00 00 5d+15:43:43.810 SET FEATURES [Disable SATA feature]
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 5d+15:43:43.730 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 5d+15:43:43.730 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 5d+15:43:43.180 FLUSH CACHE EXT
|
||||
61 00 08 00 b8 00 00 00 00 00 29 40 40 5d+15:43:42.750 WRITE FPDMA QUEUED
|
||||
|
||||
Error 9712 [11] occurred at disk power-on lifetime: 42861 hours (1785 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.260 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.260 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.260 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.260 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 50 b2 48 40 40 00:00:15.540 READ DMA EXT
|
||||
|
||||
Error 9711 [10] occurred at disk power-on lifetime: 42861 hours (1785 days + 21 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.260 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:20.260 NOP [Abort queued commands]
|
||||
25 00 00 00 01 00 00 01 50 b2 48 40 40 00:00:15.540 READ DMA EXT
|
||||
25 00 00 00 50 00 00 0d f1 08 a0 40 40 00:00:15.530 READ DMA EXT
|
||||
25 00 00 00 02 00 00 02 c8 48 a0 40 40 00:00:15.530 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 2727 -
|
||||
# 2 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
312
SSD/SK hynix/SC300/SC300 M.2 2280 256GB/C53B071EF963
Normal file
312
SSD/SK hynix/SC300/SC300 M.2 2280 256GB/C53B071EF963
Normal file
@@ -0,0 +1,312 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC300 M.2 2280 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 20100P00
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Nov 11 10:45:57 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 6) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x59) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 60) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 079 079 000 - 19129
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 2197
|
||||
100 Total_Erase_Count -O--CK 100 099 000 - 65127162
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 602
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 067 067 000 - 1000
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 50
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 152
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 4104
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 033 000 000 - 33 (Min/Max 17/55)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 100 000 - 0
|
||||
231 SSD_Life_Left PO--CK 093 093 010 - 8
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 253027
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 34968
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 10131
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 9824
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 6678 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 6678 [17] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.330 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.330 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.320 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.320 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.310 NOP [Abort queued commands]
|
||||
|
||||
Error 6677 [16] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.320 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.320 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.310 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.310 NOP [Abort queued commands]
|
||||
25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
|
||||
Error 6676 [15] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
01 -- 50 00 01 00 00 00 00 00 01 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.310 NOP [Abort queued commands]
|
||||
00 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:41.310 NOP [Abort queued commands]
|
||||
25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 1d cf 2d 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 00 08 00 00 1d cf 2d 00 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
|
||||
Error 6675 [14] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 1d cf 2d 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 00 08 00 00 1d cf 2d 00 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 01 08 2b 08 40 40 3d+02:57:29.730 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 01 08 29 08 40 40 3d+02:57:29.730 READ DMA EXT
|
||||
|
||||
Error 6674 [13] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 1d cf 2d 08 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 00 08 00 00 1d cf 2d 00 40 40 3d+02:57:29.740 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 01 08 2b 08 40 40 3d+02:57:29.730 READ DMA EXT
|
||||
25 00 d0 02 00 00 00 01 08 29 08 40 40 3d+02:57:29.730 READ DMA EXT
|
||||
|
||||
Error 6673 [12] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 51 00 00 00 00 00 00 00 00 00 00
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b1 00 c1 00 00 00 00 00 00 00 00 00 00 3d+02:57:18.570 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
|
||||
f5 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:18.570 SECURITY FREEZE LOCK
|
||||
ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+02:57:18.570 IDENTIFY DEVICE
|
||||
ef 00 03 00 46 00 00 00 00 00 00 00 00 3d+02:57:18.570 SET FEATURES [Set transfer mode]
|
||||
c6 00 00 00 10 00 00 00 00 00 00 00 00 3d+02:57:18.570 SET MULTIPLE MODE
|
||||
|
||||
Error 6672 [11] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:12.800 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:12.800 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:12.660 FLUSH CACHE EXT
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:09.300 FLUSH CACHE EXT
|
||||
61 00 08 00 98 00 00 1d cf 2f 88 40 40 3d+02:57:09.300 WRITE FPDMA QUEUED
|
||||
|
||||
Error 6671 [10] occurred at disk power-on lifetime: 19119 hours (796 days + 15 hours)
|
||||
When the command that caused the error occurred, the device was in an unknown state.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
00 -- 00 00 00 00 00 00 00 00 00 00 ff
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
e1 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:12.800 IDLE IMMEDIATE
|
||||
e5 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:12.800 CHECK POWER MODE
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:12.660 FLUSH CACHE EXT
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 40 3d+02:57:09.300 FLUSH CACHE EXT
|
||||
61 00 08 00 98 00 00 1d cf 2f 88 40 40 3d+02:57:09.300 WRITE FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 14397 -
|
||||
# 2 Short offline Completed without error 00% 14376 -
|
||||
# 3 Short offline Completed without error 00% 14352 -
|
||||
# 4 Short offline Completed without error 00% 14328 -
|
||||
# 5 Short offline Completed without error 00% 14314 -
|
||||
# 6 Short offline Completed without error 00% 14290 -
|
||||
# 7 Short offline Completed without error 00% 14266 -
|
||||
# 8 Short offline Completed without error 00% 14242 -
|
||||
# 9 Short offline Completed without error 00% 3955 -
|
||||
#10 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
143
SSD/SK hynix/SC308/SC308 SATA 128GB/4096F085D8A5
Normal file
143
SSD/SK hynix/SC308/SC308 SATA 128GB/4096F085D8A5
Normal file
@@ -0,0 +1,143 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC308 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 30000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Sep 28 23:42:43 2024 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: FAILED!
|
||||
Drive failure expected in less than 24 hours. SAVE ALL DATA.
|
||||
See vendor-specific Attribute list for failed Attributes.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 36) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 104) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 085 085 000 - 13842
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1736
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 34176175
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 90
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 002 002 000 - 1041
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 29
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 171
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 2469
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 1
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 030 000 000 - 30 (Min/Max 15/58)
|
||||
195 Hardware_ECC_Recovered -O--CK 001 001 000 - 4294967295
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 34661
|
||||
231 SSD_Life_Left PO--CK 003 003 010 NOW 98
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 281571438528
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 26207343476
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 24070661641
|
||||
250 Read_Retry_Count -O--CK 099 099 000 - 44058738
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 13 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
141
SSD/SK hynix/SC308/SC308 SATA 128GB/7968464342FE
Normal file
141
SSD/SK hynix/SC308/SC308 SATA 128GB/7968464342FE
Normal file
@@ -0,0 +1,141 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC308 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 30001P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Wed Jun 26 11:41:58 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 36) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 104) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 4946
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1806
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 8176574
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 84
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 077 077 000 - 249
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 43
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 180
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 2460
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 047 000 000 - 47 (Min/Max 12/56)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 021 001 000 - 10789
|
||||
231 SSD_Life_Left PO--CK 078 078 010 - 23
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 67365384096
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 19507164323
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 30090070386
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 21614883
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
143
SSD/SK hynix/SC308/SC308 SATA 128GB/9337185EE326
Normal file
143
SSD/SK hynix/SC308/SC308 SATA 128GB/9337185EE326
Normal file
@@ -0,0 +1,143 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC308 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 30001P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Jun 26 11:41:58 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 36) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 104) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 1
|
||||
5 Retired_Block_Count -O--CK 100 100 036 - 1
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 4016
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1207
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 6335678
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 108
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 082 082 000 - 193
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 33
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 143
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 2497
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 1
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 042 000 000 - 42 (Min/Max 9/49)
|
||||
195 Hardware_ECC_Recovered -O--CK 001 001 000 - 4294967295
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 1
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 15805
|
||||
231 SSD_Life_Left PO--CK 083 083 010 - 18
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 52147513696
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 14189736074
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 15141983187
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 18065466
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
||||
191
SSD/SK hynix/SC308/SC308 SATA 128GB/AE9E4862B6FB
Normal file
191
SSD/SK hynix/SC308/SC308 SATA 128GB/AE9E4862B6FB
Normal file
@@ -0,0 +1,191 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC308 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 30001P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri May 19 00:43:40 2023 PDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 36) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 104) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 10) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 098 098 000 - 2394
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 3212
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 5045955
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 129
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 086 086 000 - 153
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 26
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 127
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 2513
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 046 000 000 - 46 (Min/Max 14/50)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 0
|
||||
231 SSD_Life_Left PO--CK 087 087 010 - 14
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 41209029088
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 6906234090
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 9754842701
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 32722221
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 2
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 2 [1] occurred at disk power-on lifetime: 2370 hours (98 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:04:27.190 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 40 00:04:27.190 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:04:27.190 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:04:27.190 IDENTIFY DEVICE
|
||||
25 00 00 00 20 00 00 00 00 00 02 40 40 00:04:22.610 READ DMA EXT
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 2370 hours (98 days + 18 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:30.150 SMART READ LOG
|
||||
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:30.150 READ SECTOR(S)
|
||||
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:30.150 SMART READ LOG
|
||||
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:30.150 IDENTIFY DEVICE
|
||||
25 00 00 00 20 00 00 00 00 00 02 40 40 00:00:25.560 READ DMA EXT
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 2370 -
|
||||
# 2 Short offline Completed without error 00% 2370 -
|
||||
# 3 Short offline Completed without error 00% 2 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
303
SSD/SK hynix/SC308/SC308 SATA 256GB/73C621571A7A
Normal file
303
SSD/SK hynix/SC308/SC308 SATA 256GB/73C621571A7A
Normal file
@@ -0,0 +1,303 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC308 SATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 30000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Feb 15 15:31:12 2024 EAT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 36) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 104) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x19) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
No Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 094 094 000 - 5439
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1469
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 20230615
|
||||
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 40
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 072 072 000 - 303
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 23
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 253
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 5187
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
183 SATA_Downshift_Count -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 040 000 000 - 40 (Min/Max 13/69)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 096 001 000 - 338
|
||||
231 SSD_Life_Left PO--CK 073 073 010 - 28
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 163710920800
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 20475740548
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 26167769807
|
||||
250 Read_Retry_Count -O--CK 100 100 000 - 18502387
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 749 (device log contains only the most recent 20 errors)
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 749 [8] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:23:09.380 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:23:04.370 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:23:04.360 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:22:59.360 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:59.350 SMART READ LOG
|
||||
|
||||
Error 748 [7] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:23:04.360 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:22:59.360 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:59.350 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:22:54.280 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:54.270 SMART READ LOG
|
||||
|
||||
Error 747 [6] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:59.350 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:22:54.280 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:54.270 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:22:04.010 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:04.000 SMART READ LOG
|
||||
|
||||
Error 746 [5] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:54.270 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:22:04.010 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:04.000 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:58.990 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:58.980 SMART READ LOG
|
||||
|
||||
Error 745 [4] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:22:04.000 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:58.990 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:58.980 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:53.960 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:53.950 SMART READ LOG
|
||||
|
||||
Error 744 [3] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:58.980 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:53.960 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:53.950 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:30.770 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:30.760 SMART READ LOG
|
||||
|
||||
Error 743 [2] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:53.950 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:30.770 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:30.760 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:25.760 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:25.750 SMART READ LOG
|
||||
|
||||
Error 742 [1] occurred at disk power-on lifetime: 5320 hours (221 days + 16 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
10 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: IDNF
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:30.760 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:25.760 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:25.750 SMART READ LOG
|
||||
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:21:20.690 SMART READ DATA
|
||||
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:21:20.680 SMART READ LOG
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 5319 -
|
||||
# 2 Short offline Completed without error 00% 5245 -
|
||||
# 3 Short offline Completed without error 90% 4505 -
|
||||
# 4 Short offline Completed without error 00% 4043 -
|
||||
# 5 Short offline Aborted by host 90% 4041 -
|
||||
# 6 Short offline Completed without error 00% 4040 -
|
||||
# 7 Short offline Completed without error 00% 4040 -
|
||||
# 8 Short offline Aborted by host 20% 4025 -
|
||||
# 9 Short offline Completed without error 00% 4024 -
|
||||
#10 Extended offline Completed without error 00% 2812 -
|
||||
#11 Extended offline Completed without error 00% 2090 -
|
||||
#12 Short offline Completed without error 00% 2089 -
|
||||
#13 Short offline Completed without error 00% 0 -
|
||||
|
||||
Selective Self-tests/Logging not supported
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (empty) ==
|
||||
0x04 ===== = = === == General Errors Statistics (empty) ==
|
||||
0x05 ===== = = === == Temperature Statistics (empty) ==
|
||||
0x06 ===== = = === == Transport Statistics (empty) ==
|
||||
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
206
SSD/SK hynix/SC311/SC311 SATA 128GB/177C141E3E6F
Normal file
206
SSD/SK hynix/SC311/SC311 SATA 128GB/177C141E3E6F
Normal file
@@ -0,0 +1,206 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Sep 28 17:30:24 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x05) Offline data collection activity
|
||||
was aborted by an interrupting command from host.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 37) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 096 096 000 - 4390
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 300
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 1382699
|
||||
168 Min_Erase_Count -O--CK 096 096 000 - 61
|
||||
169 Max_Erase_Count -O--CK 090 090 000 - 160
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 86
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 094 001 000 - 96
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 397
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 69
|
||||
194 Temperature_Celsius -O---- 030 017 000 - 30 (Min/Max 17/48)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 195430
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 2065652
|
||||
233 Media_Wearout_Indicator -O--CK 007 001 000 - 94
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 25148483968
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 9588736748
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 3376789495
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Interrupted (host reset) 50% 1229 -
|
||||
# 2 Extended offline Aborted by host 40% 55 -
|
||||
# 3 Short offline Completed without error 00% 55 -
|
||||
# 4 Short offline Completed without error 00% 55 -
|
||||
# 5 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: 28/47 Celsius
|
||||
Lifetime Min/Max Temperature: 17/48 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 28857/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (39)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 300 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4390 --- Power-on Hours
|
||||
0x01 0x018 6 9588736748 --- Logical Sectors Written
|
||||
0x01 0x020 6 132562357 --- Number of Write Commands
|
||||
0x01 0x028 6 3376789495 --- Logical Sectors Read
|
||||
0x01 0x030 6 96441690 --- Number of Read Commands
|
||||
0x01 0x038 6 1719278023953 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 69 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 30 --- Current Temperature
|
||||
0x05 0x010 1 28 --- Average Short Term Temperature
|
||||
0x05 0x018 1 30 --- Average Long Term Temperature
|
||||
0x05 0x020 1 48 --- Highest Temperature
|
||||
0x05 0x028 1 17 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 25 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 30 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 254350 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 735 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 6 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
222
SSD/SK hynix/SC311/SC311 SATA 128GB/18973B1C039B
Normal file
222
SSD/SK hynix/SC311/SC311 SATA 128GB/18973B1C039B
Normal file
@@ -0,0 +1,222 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Jul 5 10:12:00 2023
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 085 085 000 - 13636
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 2608
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 255507
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 2
|
||||
169 Max_Erase_Count -O--CK 097 097 000 - 47
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 79
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 099 001 000 - 18
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 397
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 693
|
||||
194 Temperature_Celsius -O---- 036 015 000 - 36 (Min/Max 15/51)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 601
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 1314584
|
||||
233 Media_Wearout_Indicator -O--CK 002 001 000 - 99
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 4643770944
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 8147581539
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 6658576722
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
Warning! SMART Extended Self-test Log Structure (1/2) error: invalid SMART checksum.
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 2350 -
|
||||
# 2 Short offline Interrupted (host reset) 50% 2341 -
|
||||
# 3 Short offline Completed without error 00% 2327 -
|
||||
# 4 Short offline Completed without error 00% 2315 -
|
||||
# 5 Short offline Completed without error 00% 2304 -
|
||||
# 6 Short offline Completed without error 00% 2295 -
|
||||
# 7 Short offline Interrupted (host reset) 70% 2281 -
|
||||
# 8 Short offline Completed without error 00% 1158 -
|
||||
# 9 Short offline Completed without error 00% 1158 -
|
||||
#10 Short offline Interrupted (host reset) 90% 365 -
|
||||
#11 Short offline Interrupted (host reset) 90% 322 -
|
||||
#12 Short offline Interrupted (host reset) 80% 169 -
|
||||
#13 Short offline Aborted by host 90% 166 -
|
||||
#14 Short offline Aborted by host 90% 15 -
|
||||
#15 Short offline Aborted by host 90% 10 -
|
||||
#16 Short offline Aborted by host 90% 9 -
|
||||
#17 Short offline Completed without error 00% 8 -
|
||||
#18 Short offline Interrupted (host reset) 90% 5 -
|
||||
#19 Short offline Completed without error 00% 4 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 36 Celsius
|
||||
Power Cycle Min/Max Temperature: 29/36 Celsius
|
||||
Lifetime Min/Max Temperature: 15/52 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 2/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (162)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 2608 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 13636 --- Power-on Hours
|
||||
0x01 0x018 6 8147581539 --- Logical Sectors Written
|
||||
0x01 0x020 6 132722744 --- Number of Write Commands
|
||||
0x01 0x028 6 6658576722 --- Logical Sectors Read
|
||||
0x01 0x030 6 87836178 --- Number of Read Commands
|
||||
0x01 0x038 6 1674064130647 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 693 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 36 --- Current Temperature
|
||||
0x05 0x010 1 33 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 52 --- Highest Temperature
|
||||
0x05 0x028 1 15 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 26 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 742480 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 10469 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 128GB/21ED7E2EBD50
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 128GB/21ED7E2EBD50
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Jan 3 18:49:27 2024 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 062 062 000 - 34188
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 140
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 800942
|
||||
168 Min_Erase_Count -O--CK 099 099 000 - 18
|
||||
169 Max_Erase_Count -O--CK 095 095 000 - 87
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 71
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 097 001 000 - 56
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 390
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 95
|
||||
194 Temperature_Celsius -O---- 032 013 000 - 32 (Min/Max 13/45)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 1842
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 8137727
|
||||
233 Media_Wearout_Indicator -O--CK 004 001 000 - 97
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 14703841536
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 23487860054
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 4352578585
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 32 Celsius
|
||||
Power Cycle Min/Max Temperature: 24/32 Celsius
|
||||
Lifetime Min/Max Temperature: 13/50 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 13/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (86)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 140 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 34188 --- Power-on Hours
|
||||
0x01 0x018 6 23487860054 --- Logical Sectors Written
|
||||
0x01 0x020 6 632630910 --- Number of Write Commands
|
||||
0x01 0x028 6 4352578585 --- Logical Sectors Read
|
||||
0x01 0x030 6 129029438 --- Number of Read Commands
|
||||
0x01 0x038 6 2817715712 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 95 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 32 --- Current Temperature
|
||||
0x05 0x010 1 30 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 50 --- Highest Temperature
|
||||
0x05 0x028 1 13 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 14 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 25 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 2042940 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 954 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 128GB/60653C29D28E
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 128GB/60653C29D28E
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Dec 4 11:22:39 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x04) Offline data collection activity
|
||||
was suspended by an interrupting command from host.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 257
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 76
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 42618
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 1
|
||||
169 Max_Erase_Count -O--CK 100 100 000 - 6
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 14
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 3
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 396
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 033 019 000 - 33 (Min/Max 19/54)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 2884
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 12237
|
||||
233 Media_Wearout_Indicator -O--CK 001 001 000 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 775564032
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 848841897
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 297604956
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 30/34 Celsius
|
||||
Lifetime Min/Max Temperature: 19/54 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 1366/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (59)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 76 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 257 --- Power-on Hours
|
||||
0x01 0x018 6 848841897 --- Logical Sectors Written
|
||||
0x01 0x020 6 14037132 --- Number of Write Commands
|
||||
0x01 0x028 6 297604956 --- Logical Sectors Read
|
||||
0x01 0x030 6 2925012 --- Number of Read Commands
|
||||
0x01 0x038 6 1700767906717 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 31 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 54 --- Highest Temperature
|
||||
0x05 0x028 1 19 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 30 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 14600 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 346 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 23 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
208
SSD/SK hynix/SC311/SC311 SATA 128GB/64CC876DBAD4
Normal file
208
SSD/SK hynix/SC311/SC311 SATA 128GB/64CC876DBAD4
Normal file
@@ -0,0 +1,208 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Dec 20 22:39:59 2023 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 079 079 000 - 19452
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 218
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 423055
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 8
|
||||
169 Max_Erase_Count -O--CK 096 096 000 - 70
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 191
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 099 001 000 - 30
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 395
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 398
|
||||
194 Temperature_Celsius -O---- 036 021 000 - 36 (Min/Max 21/52)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 77182
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 497774
|
||||
233 Media_Wearout_Indicator -O--CK 003 001 000 - 98
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 7628227776
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 18218177856
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 6625796458
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 15216 -
|
||||
# 2 Short offline Completed without error 00% 15216 -
|
||||
# 3 Short offline Interrupted (host reset) 90% 10604 -
|
||||
# 4 Short offline Interrupted (host reset) 60% 10604 -
|
||||
# 5 Short offline Aborted by host 20% 5364 -
|
||||
# 6 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 36 Celsius
|
||||
Power Cycle Min/Max Temperature: 33/42 Celsius
|
||||
Lifetime Min/Max Temperature: 21/52 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 56709/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (99)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 218 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 19452 --- Power-on Hours
|
||||
0x01 0x018 6 18218177856 --- Logical Sectors Written
|
||||
0x01 0x020 6 625320122 --- Number of Write Commands
|
||||
0x01 0x028 6 6625796458 --- Logical Sectors Read
|
||||
0x01 0x030 6 115829582 --- Number of Read Commands
|
||||
0x01 0x038 6 1656186717435 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 398 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 36 --- Current Temperature
|
||||
0x05 0x010 1 35 --- Average Short Term Temperature
|
||||
0x05 0x018 1 34 --- Average Long Term Temperature
|
||||
0x05 0x020 1 52 --- Highest Temperature
|
||||
0x05 0x028 1 21 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 24 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 27 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 1163700 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1580 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
208
SSD/SK hynix/SC311/SC311 SATA 128GB/704B00210701
Normal file
208
SSD/SK hynix/SC311/SC311 SATA 128GB/704B00210701
Normal file
@@ -0,0 +1,208 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed May 10 23:29:52 2023 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x05) Offline data collection activity
|
||||
was aborted by an interrupting command from host.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 40) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 100 098 000 - 102
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 41
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 11725
|
||||
168 Min_Erase_Count -O--CK 253 100 000 - 0
|
||||
169 Max_Erase_Count -O--CK 100 095 000 - 1
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 31
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 1
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 396
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 100 000 - 0
|
||||
194 Temperature_Celsius -O---- 050 050 000 - 50 (Min/Max 50/50)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 23
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 23
|
||||
233 Media_Wearout_Indicator -O--CK 003 001 000 - 98
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 190744512
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 228086496
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 5632056
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Interrupted (host reset) 80% 470 -
|
||||
# 2 Short offline Interrupted (host reset) 20% 470 -
|
||||
# 3 Short offline Completed without error 00% 220 -
|
||||
# 4 Short offline Completed without error 00% 220 -
|
||||
# 5 Short offline Interrupted (host reset) 80% 220 -
|
||||
# 6 Short offline Interrupted (host reset) 80% 219 -
|
||||
# 7 Short offline Completed without error 00% 2 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 50 Celsius
|
||||
Power Cycle Min/Max Temperature: 46/50 Celsius
|
||||
Lifetime Min/Max Temperature: 26/59 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 2245/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (128)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 41 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 102 --- Power-on Hours
|
||||
0x01 0x018 6 228086496 --- Logical Sectors Written
|
||||
0x01 0x020 6 6550187 --- Number of Write Commands
|
||||
0x01 0x028 6 5632056 --- Logical Sectors Read
|
||||
0x01 0x030 6 220024 --- Number of Read Commands
|
||||
0x01 0x038 6 367200000 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 50 --- Current Temperature
|
||||
0x05 0x010 1 47 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 59 --- Highest Temperature
|
||||
0x05 0x028 1 26 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 46 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 6050 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 52 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
206
SSD/SK hynix/SC311/SC311 SATA 128GB/90212266302B
Normal file
206
SSD/SK hynix/SC311/SC311 SATA 128GB/90212266302B
Normal file
@@ -0,0 +1,206 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Jun 7 20:41:10 2024 BST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x05) Offline data collection activity
|
||||
was aborted by an interrupting command from host.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 34) The self-test routine was interrupted
|
||||
by the host with a hard or soft reset.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 085 085 000 - 13627
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 2103
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 1472017
|
||||
168 Min_Erase_Count -O--CK 096 096 000 - 71
|
||||
169 Max_Erase_Count -O--CK 091 091 000 - 137
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 105
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 094 001 000 - 102
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 397
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 187
|
||||
194 Temperature_Celsius -O---- 033 008 000 - 33 (Min/Max 8/45)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 257
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 22910568
|
||||
233 Media_Wearout_Indicator -O--CK 008 001 000 - 93
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 26768642112
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 30981481861
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 51307551183
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Interrupted (host reset) 20% 13555 -
|
||||
# 2 Short offline Aborted by host 90% 13555 -
|
||||
# 3 Short offline Completed without error 00% 13555 -
|
||||
# 4 Short offline Interrupted (host reset) 30% 13555 -
|
||||
# 5 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 29/35 Celsius
|
||||
Lifetime Min/Max Temperature: 8/45 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 348/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (146)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 2103 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 13627 --- Power-on Hours
|
||||
0x01 0x018 6 30981481861 --- Logical Sectors Written
|
||||
0x01 0x020 6 708503140 --- Number of Write Commands
|
||||
0x01 0x028 6 51307551183 --- Logical Sectors Read
|
||||
0x01 0x030 6 836012019 --- Number of Read Commands
|
||||
0x01 0x038 6 1812559744 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 187 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 28 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 45 --- Highest Temperature
|
||||
0x05 0x028 1 8 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 11 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 19 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 807030 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 8166 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 6 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 128GB/AB732E96BBD4
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 128GB/AB732E96BBD4
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jan 13 01:04:31 2024 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 088 088 000 - 10991
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 49
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 39342
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 1
|
||||
169 Max_Erase_Count -O--CK 100 100 000 - 6
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 19
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 2
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 398
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 14
|
||||
194 Temperature_Celsius -O---- 040 022 000 - 40 (Min/Max 22/59)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 248901
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 17215
|
||||
233 Media_Wearout_Indicator -O--CK 001 001 000 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 709607232
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 8859377174
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 162937502
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 28/44 Celsius
|
||||
Lifetime Min/Max Temperature: 22/60 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 617007/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (64)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 10991 --- Power-on Hours
|
||||
0x01 0x018 6 8859377174 --- Logical Sectors Written
|
||||
0x01 0x020 6 144207237 --- Number of Write Commands
|
||||
0x01 0x028 6 162937502 --- Logical Sectors Read
|
||||
0x01 0x030 6 2593300 --- Number of Read Commands
|
||||
0x01 0x038 6 912894336 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 14 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 --- Current Temperature
|
||||
0x05 0x010 1 37 --- Average Short Term Temperature
|
||||
0x05 0x018 1 37 --- Average Long Term Temperature
|
||||
0x05 0x020 1 60 --- Highest Temperature
|
||||
0x05 0x028 1 22 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 29 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 32 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 657710 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 306 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 128GB/FE41CFFF3B1C
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 128GB/FE41CFFF3B1C
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 128GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Jul 9 00:32:18 2023 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 20) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 075 075 000 - 22948
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 100
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 470342
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 6
|
||||
169 Max_Erase_Count -O--CK 096 096 000 - 71
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 45
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 098 001 000 - 32
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 380
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 507
|
||||
194 Temperature_Celsius -O---- 049 021 000 - 49 (Min/Max 21/49)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 048 001 000 - 780
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 6876780
|
||||
233 Media_Wearout_Indicator -O--CK 003 001 000 - 98
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 8630225696
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 15646170001
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 19899952790
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 49 Celsius
|
||||
Power Cycle Min/Max Temperature: 32/50 Celsius
|
||||
Lifetime Min/Max Temperature: 21/57 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 102/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (22)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 100 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 22948 --- Power-on Hours
|
||||
0x01 0x018 6 15646170001 --- Logical Sectors Written
|
||||
0x01 0x020 6 404999877 --- Number of Write Commands
|
||||
0x01 0x028 6 19899952790 --- Logical Sectors Read
|
||||
0x01 0x030 6 348977682 --- Number of Read Commands
|
||||
0x01 0x038 6 1688888180119 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 507 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 49 --- Current Temperature
|
||||
0x05 0x010 1 34 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 57 --- Highest Temperature
|
||||
0x05 0x028 1 21 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 21 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 23 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 1368990 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 2968 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 2 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 65 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
204
SSD/SK hynix/SC311/SC311 SATA 256GB/0C220F63821C
Normal file
204
SSD/SK hynix/SC311/SC311 SATA 256GB/0C220F63821C
Normal file
@@ -0,0 +1,204 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jan 4 02:21:02 2024 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x03) Offline data collection activity
|
||||
is in progress.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 241) Self-test routine in progress...
|
||||
10% of test remaining.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 097 097 000 - 3370
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 437
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 327107
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 7
|
||||
169 Max_Erase_Count -O--CK 099 099 000 - 18
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 116
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 11
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 776
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 5
|
||||
194 Temperature_Celsius -O---- 021 000 000 - 21 (Min/Max 17/55)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 1885
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 4658078
|
||||
233 Media_Wearout_Indicator -O--CK 001 001 000 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 5837755648
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 8910210248
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 9206674484
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 3365 -
|
||||
# 2 Short offline Completed without error 00% 3364 -
|
||||
# 3 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: DST executing in background (3)
|
||||
Current Temperature: 21 Celsius
|
||||
Power Cycle Min/Max Temperature: 18/22 Celsius
|
||||
Lifetime Min/Max Temperature: 17/62 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 71/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (117)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 437 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3370 --- Power-on Hours
|
||||
0x01 0x018 6 8910210248 --- Logical Sectors Written
|
||||
0x01 0x020 6 165731229 --- Number of Write Commands
|
||||
0x01 0x028 6 9206674484 --- Logical Sectors Read
|
||||
0x01 0x030 6 387100850 --- Number of Read Commands
|
||||
0x01 0x038 6 1704072047983 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 21 --- Current Temperature
|
||||
0x05 0x010 1 28 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 62 --- Highest Temperature
|
||||
0x05 0x028 1 17 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 18 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 21 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 199950 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 2032 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 31 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
207
SSD/SK hynix/SC311/SC311 SATA 256GB/141740925398
Normal file
207
SSD/SK hynix/SC311/SC311 SATA 256GB/141740925398
Normal file
@@ -0,0 +1,207 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sun Aug 25 17:19:56 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 093 093 000 - 6651
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 406
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 1374183
|
||||
168 Min_Erase_Count -O--CK 099 099 000 - 17
|
||||
169 Max_Erase_Count -O--CK 094 094 000 - 97
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 141
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 097 001 000 - 50
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 707
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 036 000 000 - 36 (Min/Max 5/49)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 1270
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 2158864
|
||||
233 Media_Wearout_Indicator -O--CK 004 001 000 - 97
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 25093831376
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 10051894195
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 4734313539
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 10 -
|
||||
# 2 Short offline Completed without error 00% 8 -
|
||||
# 3 Short offline Completed without error 00% 5 -
|
||||
# 4 Short offline Completed without error 00% 3 -
|
||||
# 5 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 36 Celsius
|
||||
Power Cycle Min/Max Temperature: 35/36 Celsius
|
||||
Lifetime Min/Max Temperature: 5/49 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 7/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (100)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 406 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6651 --- Power-on Hours
|
||||
0x01 0x018 6 10051894195 --- Logical Sectors Written
|
||||
0x01 0x020 6 272723201 --- Number of Write Commands
|
||||
0x01 0x028 6 4734313539 --- Logical Sectors Read
|
||||
0x01 0x030 6 98114751 --- Number of Read Commands
|
||||
0x01 0x038 6 1666344734521 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 36 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 49 --- Highest Temperature
|
||||
0x05 0x028 1 5 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 24 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 395770 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1214 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
204
SSD/SK hynix/SC311/SC311 SATA 256GB/1A4DB2F17EC8
Normal file
204
SSD/SK hynix/SC311/SC311 SATA 256GB/1A4DB2F17EC8
Normal file
@@ -0,0 +1,204 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Oct 19 19:52:22 2024 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0xe7a8
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 092 092 000 - 7386
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1002
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 911128
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 12
|
||||
169 Max_Erase_Count -O--CK 096 096 000 - 71
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 83
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 098 001 000 - 32
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 638
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 318
|
||||
194 Temperature_Celsius -O---- 033 012 000 - 33 (Min/Max 12/58)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 017 001 000 - 1833
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 8906916
|
||||
233 Media_Wearout_Indicator -O--CK 003 001 000 - 98
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 16666729648
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 24051322777
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 27891609172
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 7 -
|
||||
# 2 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 25/33 Celsius
|
||||
Lifetime Min/Max Temperature: 1/63 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 3/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (98)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 1002 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 7386 --- Power-on Hours
|
||||
0x01 0x018 6 24051322777 --- Logical Sectors Written
|
||||
0x01 0x020 6 410062844 --- Number of Write Commands
|
||||
0x01 0x028 6 27891609172 --- Logical Sectors Read
|
||||
0x01 0x030 6 349943259 --- Number of Read Commands
|
||||
0x01 0x038 6 1713084685372 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 318 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 63 --- Highest Temperature
|
||||
0x05 0x028 1 1 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 29 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 345070 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 68661 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 2 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 256GB/508D3067A3E9
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 256GB/508D3067A3E9
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jun 24 21:34:43 2024 AEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 098 098 000 - 2448
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 102
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 78402
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 2
|
||||
169 Max_Erase_Count -O--CK 100 100 000 - 11
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 23
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 2
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 765
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 153
|
||||
194 Temperature_Celsius -O---- 026 019 000 - 26 (Min/Max 19/58)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 10599
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 1551251
|
||||
233 Media_Wearout_Indicator -O--CK 001 001 000 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 1407813120
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 1624817089
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 5047204105
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 26 Celsius
|
||||
Power Cycle Min/Max Temperature: 22/28 Celsius
|
||||
Lifetime Min/Max Temperature: 1/58 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 6793/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (176)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 102 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 2448 --- Power-on Hours
|
||||
0x01 0x018 6 1624817089 --- Logical Sectors Written
|
||||
0x01 0x020 6 32262340 --- Number of Write Commands
|
||||
0x01 0x028 6 5047204105 --- Logical Sectors Read
|
||||
0x01 0x030 6 167521391 --- Number of Read Commands
|
||||
0x01 0x038 6 222865408 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 153 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 26 --- Current Temperature
|
||||
0x05 0x010 1 24 --- Average Short Term Temperature
|
||||
0x05 0x018 1 22 --- Average Long Term Temperature
|
||||
0x05 0x020 1 58 --- Highest Temperature
|
||||
0x05 0x028 1 1 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 18 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 22 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 143920 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 717 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
206
SSD/SK hynix/SC311/SC311 SATA 256GB/C9F228D7F07A
Normal file
206
SSD/SK hynix/SC311/SC311 SATA 256GB/C9F228D7F07A
Normal file
@@ -0,0 +1,206 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p2 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 256GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Jul 26 00:13:34 2024 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 095 095 000 - 5074
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 221
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 73168
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 1
|
||||
169 Max_Erase_Count -O--CK 100 100 000 - 6
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 20
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 3
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 782
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 4
|
||||
194 Temperature_Celsius -O---- 040 000 000 - 40 (Min/Max 23/47)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 984
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 1304890
|
||||
233 Media_Wearout_Indicator -O--CK 001 001 000 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 1315022912
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 3349740047
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 3801020417
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 23 -
|
||||
# 2 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 40 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/40 Celsius
|
||||
Lifetime Min/Max Temperature: 23/47 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 5/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (51)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 221 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 5074 --- Power-on Hours
|
||||
0x01 0x018 6 3349740047 --- Logical Sectors Written
|
||||
0x01 0x020 6 61256618 --- Number of Write Commands
|
||||
0x01 0x028 6 3801020417 --- Logical Sectors Read
|
||||
0x01 0x030 6 77531084 --- Number of Read Commands
|
||||
0x01 0x038 6 1531797384525 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 --- Current Temperature
|
||||
0x05 0x010 1 30 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 47 --- Highest Temperature
|
||||
0x05 0x028 1 23 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 28 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 29 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 299470 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 755 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 19 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 512GB/44A1C6264EEB
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 512GB/44A1C6264EEB
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 512GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Dec 7 19:48:06 2023 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 063 063 000 - 33545
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 898
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 17445676
|
||||
168 Min_Erase_Count -O--CK 082 082 000 - 276
|
||||
169 Max_Erase_Count -O--CK 078 078 000 - 341
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 38
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 080 001 000 - 308
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1535
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 1
|
||||
194 Temperature_Celsius -O---- 033 000 000 - 33 (Min/Max 11/42)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 281427
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 24715931
|
||||
233 Media_Wearout_Indicator -O--CK 021 001 000 - 80
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 321432413328
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 58403459065
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 20221103234
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 25/49 Celsius
|
||||
Lifetime Min/Max Temperature: 11/56 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 48327/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (185)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 898 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 33545 --- Power-on Hours
|
||||
0x01 0x018 6 58403459065 --- Logical Sectors Written
|
||||
0x01 0x020 6 1473783286 --- Number of Write Commands
|
||||
0x01 0x028 6 20221103234 --- Logical Sectors Read
|
||||
0x01 0x030 6 667143922 --- Number of Read Commands
|
||||
0x01 0x038 6 502915712 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 34 --- Average Short Term Temperature
|
||||
0x05 0x018 1 32 --- Average Long Term Temperature
|
||||
0x05 0x020 1 56 --- Highest Temperature
|
||||
0x05 0x028 1 11 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 12 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 15 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 1998560 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 2510 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 20 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 36 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
204
SSD/SK hynix/SC311/SC311 SATA 512GB/64D49C123512
Normal file
204
SSD/SK hynix/SC311/SC311 SATA 512GB/64D49C123512
Normal file
@@ -0,0 +1,204 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 512GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Mar 8 02:40:29 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 076 076 000 - 21933
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 103
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 922953
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 3
|
||||
169 Max_Erase_Count -O--CK 096 096 000 - 61
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 63
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 099 001 000 - 16
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1558
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 253 253 000 - 0
|
||||
194 Temperature_Celsius -O---- 023 019 000 - 23 (Min/Max 19/66)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 067 001 000 - 1150
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 28462771
|
||||
233 Media_Wearout_Indicator -O--CK 002 001 000 - 99
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 16807367760
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 52828938488
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 46352755026
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 21573 -
|
||||
# 2 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 23 Celsius
|
||||
Power Cycle Min/Max Temperature: 19/24 Celsius
|
||||
Lifetime Min/Max Temperature: 18/66 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 10636/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (45)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 103 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 21933 --- Power-on Hours
|
||||
0x01 0x018 6 52828938488 --- Logical Sectors Written
|
||||
0x01 0x020 6 1813191808 --- Number of Write Commands
|
||||
0x01 0x028 6 46352755026 --- Logical Sectors Read
|
||||
0x01 0x030 6 1061214018 --- Number of Read Commands
|
||||
0x01 0x038 6 1706411266080 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 23 --- Current Temperature
|
||||
0x05 0x010 1 21 --- Average Short Term Temperature
|
||||
0x05 0x018 1 19 --- Average Long Term Temperature
|
||||
0x05 0x020 1 66 --- Highest Temperature
|
||||
0x05 0x028 1 18 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 18 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 19 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 1310760 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 2397 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
204
SSD/SK hynix/SC311/SC311 SATA 512GB/7E0D646BE3CD
Normal file
204
SSD/SK hynix/SC311/SC311 SATA 512GB/7E0D646BE3CD
Normal file
@@ -0,0 +1,204 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 512GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Mar 25 09:01:58 2024 EET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 053 053 000 - 41618
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 333
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 2238061
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 13
|
||||
169 Max_Erase_Count -O--CK 096 096 000 - 75
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 24
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 098 001 000 - 40
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1546
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 212
|
||||
194 Temperature_Celsius -O---- 031 016 000 - 31 (Min/Max 16/65)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 6241
|
||||
212 Phy_Error_Count -O--CK 099 099 000 - 57204598
|
||||
233 Media_Wearout_Indicator -O--CK 004 001 000 - 97
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 41172250688
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 85528644578
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 139535770423
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 41607 -
|
||||
# 2 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 31 Celsius
|
||||
Power Cycle Min/Max Temperature: 30/31 Celsius
|
||||
Lifetime Min/Max Temperature: 1/68 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 5/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (49)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 333 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 41618 --- Power-on Hours
|
||||
0x01 0x018 6 85528644578 --- Logical Sectors Written
|
||||
0x01 0x020 6 1694821352 --- Number of Write Commands
|
||||
0x01 0x028 6 139535770423 --- Logical Sectors Read
|
||||
0x01 0x030 6 3039229563 --- Number of Read Commands
|
||||
0x01 0x038 6 1690226760035 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 212 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 31 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 68 --- Highest Temperature
|
||||
0x05 0x028 1 1 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 20 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 27 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 2183020 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 36192 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 2 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
203
SSD/SK hynix/SC311/SC311 SATA 512GB/9CA2FF4F6B9A
Normal file
203
SSD/SK hynix/SC311/SC311 SATA 512GB/9CA2FF4F6B9A
Normal file
@@ -0,0 +1,203 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC311 SATA 512GB
|
||||
Serial Number: --
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Feb 10 03:46:11 2024
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0xbf97
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 253 253 036 - 0
|
||||
9 Power_On_Hours -O--CK 084 084 000 - 14271
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 594
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 707988
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 3
|
||||
169 Max_Erase_Count -O--CK 098 098 000 - 34
|
||||
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 203
|
||||
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 001 000 - 13
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 1
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 1
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 1261
|
||||
181 Non4k_Aligned_Access -O--CK 253 253 000 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
||||
184 End-to-End_Error -O--CK 253 253 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 204
|
||||
194 Temperature_Celsius -O---- 030 016 000 - 30 (Min/Max 16/67)
|
||||
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
||||
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 100 001 000 - 83
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 9902718
|
||||
233 Media_Wearout_Indicator -O--CK 002 001 000 - 99
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 12427440288
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 25534706141
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 16841772965
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 30 Celsius
|
||||
Power Cycle Min/Max Temperature: 29/30 Celsius
|
||||
Lifetime Min/Max Temperature: 16/68 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 3/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (1)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 594 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 14271 --- Power-on Hours
|
||||
0x01 0x018 6 25534706141 --- Logical Sectors Written
|
||||
0x01 0x020 6 642659262 --- Number of Write Commands
|
||||
0x01 0x028 6 16841772965 --- Logical Sectors Read
|
||||
0x01 0x030 6 334230647 --- Number of Read Commands
|
||||
0x01 0x038 6 1624122316416 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 204 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 30 --- Current Temperature
|
||||
0x05 0x010 1 - --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 68 --- Highest Temperature
|
||||
0x05 0x028 1 16 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 24 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 824220 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1855 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
232
SSD/SK hynix/SC313/SC313 HFS256G32TNF-N3A0A/E93AE22EB601
Normal file
232
SSD/SK hynix/SC313/SC313 HFS256G32TNF-N3A0A/E93AE22EB601
Normal file
@@ -0,0 +1,232 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC313 HFS256G32TNF-N3A0A
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Jan 18 18:38:15 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 32
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 560
|
||||
5 Retired_Block_Count PO--CK 097 097 005 - 1
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 37187
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 149
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 394096
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 1
|
||||
169 Max_Erase_Count -O--CK 097 097 000 - 52
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Wear_Leveling_Count -O--CK 100 100 005 - 14
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 39
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O---K 100 100 000 - 270
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 172
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 462
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
181 Non4k_Aligned_Access -O---K 087 047 000 - 74818078
|
||||
183 SATA_Downshift_Count -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO-RCK 100 100 097 - 434
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 560
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 027 054 000 - 27 (Min/Max 14/54)
|
||||
196 Reallocated_Event_Count -O--CK 100 097 036 - 1
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 2448
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
201 Percent_Lifetime_Remain PO---K 100 100 005 - 4128782
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 295
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 398643
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 843481
|
||||
243 Total_Media_Writes -O--CK 100 100 000 - 225204
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 3 Device Statistics Notification
|
||||
0x0d GPL R/O 8 LPS Mis-alignment log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
Device Error Count: 1
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
||||
LH = LBA High (was: Cylinder High) Register ] LBA
|
||||
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
||||
LL = LBA Low (was: Sector Number) Register ]
|
||||
DV = Device (was: Device/Head) Register
|
||||
DC = Device Control Register
|
||||
ER = Error register
|
||||
ST = Status register
|
||||
Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 25836 hours (1076 days + 12 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 20 00 80 00 00 07 62 14 20 40 40 7d+11:02:53.012 READ FPDMA QUEUED
|
||||
60 00 20 00 78 00 00 07 62 14 00 40 40 7d+11:02:53.012 READ FPDMA QUEUED
|
||||
60 00 20 00 70 00 00 07 62 13 e0 40 40 7d+11:02:53.012 READ FPDMA QUEUED
|
||||
60 00 20 00 68 00 00 07 62 13 c0 40 40 7d+11:02:53.002 READ FPDMA QUEUED
|
||||
60 00 20 00 60 00 00 07 62 13 a0 40 40 7d+11:02:53.002 READ FPDMA QUEUED
|
||||
|
||||
Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Vendor (0x50) Completed without error 00% 37187 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 27 Celsius
|
||||
Power Cycle Min/Max Temperature: 19/27 Celsius
|
||||
Lifetime Min/Max Temperature: 14/54 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 631/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (176)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 149 -D- Lifetime Power-On Resets
|
||||
0x01 0x010 4 37187 -D- Power-on Hours
|
||||
0x01 0x018 6 398643 --- Logical Sectors Written
|
||||
0x01 0x020 6 398643 --- Number of Write Commands
|
||||
0x01 0x028 6 843481 --- Logical Sectors Read
|
||||
0x01 0x030 6 225204 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 560 -D- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 27 -D- Current Temperature
|
||||
0x05 0x020 1 54 -D- Highest Temperature
|
||||
0x05 0x028 1 14 -D- Lowest Temperature
|
||||
0x05 0x038 1 0 -D- Lowest Average Short Term Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 509 -D- Number of Hardware Resets
|
||||
0x06 0x010 4 368 -D- Number of ASR Events
|
||||
0x06 0x018 4 0 -D- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 14 -D- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
201
SSD/SK hynix/SC313/SC313 HFS512G32TNF-N3A0A/02D55CCEDDB2
Normal file
201
SSD/SK hynix/SC313/SC313 HFS512G32TNF-N3A0A/02D55CCEDDB2
Normal file
@@ -0,0 +1,201 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC313 HFS512G32TNF-N3A0A
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 70000P10
|
||||
User Capacity: 512,110,190,592 bytes [512 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Tue Oct 31 00:49:05 2023 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Disabled
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unknown
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5b) SMART execute Offline immediate.
|
||||
Auto Offline data collection on/off support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 32
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
|
||||
5 Retired_Block_Count PO--CK 100 100 005 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 000 - 30211
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 153
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 604698
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 4
|
||||
169 Max_Erase_Count -O--CK 099 099 000 - 25
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
173 Wear_Leveling_Count -O--CK 100 100 005 - 11
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 64
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O---K 100 100 000 - 1507
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
181 Non4k_Aligned_Access -O---K 100 079 000 - 31653727
|
||||
183 SATA_Downshift_Count -O--CK 100 100 000 - 0
|
||||
184 End-to-End_Error PO-RCK 100 100 097 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 041 049 000 - 41 (Min/Max 21/49)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
201 Percent_Lifetime_Remain PO---K 100 100 005 - 11
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 6012
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 1043678
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 998774
|
||||
243 Total_Media_Writes -O--CK 100 100 000 - 342198
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 1 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x0a GPL R/W 3 Device Statistics Notification
|
||||
0x0d GPL R/O 8 LPS Mis-alignment log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum.
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Vendor (0x50) Completed without error 00% 30211 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Status Version: 3
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 41 Celsius
|
||||
Power Cycle Min/Max Temperature: 34/41 Celsius
|
||||
Lifetime Min/Max Temperature: 21/53 Celsius
|
||||
Specified Max Operating Temperature: 80 Celsius
|
||||
Under/Over Temperature Limit Count: 245/0
|
||||
|
||||
SCT Temperature History Version: 2
|
||||
Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: -20/80 Celsius
|
||||
Min/Max Temperature Limit: -20/125 Celsius
|
||||
Temperature History Size (Index): 192 (145)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: 80 (8.0 seconds)
|
||||
Write: 80 (8.0 seconds)
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 153 -D- Lifetime Power-On Resets
|
||||
0x01 0x010 4 30211 -D- Power-on Hours
|
||||
0x01 0x018 6 1043678 --- Logical Sectors Written
|
||||
0x01 0x020 6 1043678 --- Number of Write Commands
|
||||
0x01 0x028 6 998774 --- Logical Sectors Read
|
||||
0x01 0x030 6 342198 --- Number of Read Commands
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 41 -D- Current Temperature
|
||||
0x05 0x020 1 53 -D- Highest Temperature
|
||||
0x05 0x028 1 21 -D- Lowest Temperature
|
||||
0x05 0x038 1 0 -D- Lowest Average Short Term Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1074 -D- Number of Hardware Resets
|
||||
0x06 0x010 4 916 -D- Number of ASR Events
|
||||
0x06 0x018 4 0 -D- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 11 -D- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x0002 2 0 R_ERR response for data FIS
|
||||
0x0005 2 0 R_ERR response for non-data FIS
|
||||
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
182
SSD/SK hynix/SC401/SC401 SATA 256GB/5F74D3FA3017
Normal file
182
SSD/SK hynix/SC401/SC401 SATA 256GB/5F74D3FA3017
Normal file
@@ -0,0 +1,182 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC401 SATA 256GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 90000121
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Mon Jul 29 21:59:19 2024 PDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count PO--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 099 099 000 - 1033
|
||||
12 Power_Cycle_Count PO--CK 100 100 020 - 1934
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 242890
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 5
|
||||
169 Max_Erase_Count -O--CK 098 098 000 - 64
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 901
|
||||
175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0
|
||||
177 Wear_Leveling_Count PO--CK 100 100 005 - 14
|
||||
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0
|
||||
180 Erase_Fail_Count PO--CK 100 100 010 - 466
|
||||
181 Non4k_Aligned_Access PO--CK 100 100 010 - 0
|
||||
182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect PO--CK 100 100 001 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 8
|
||||
194 Temperature_Celsius -O---K 041 052 000 - 41 (Min/Max 16/52)
|
||||
195 Hardware_ECC_Recovered PO-R-- 100 100 001 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count PO--CK 100 100 001 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 095 001 000 - 416
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 10265
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 6258473888
|
||||
238 Unknown_SK_hynix_Attrib PO---K 100 100 001 - 100
|
||||
241 Total_Writes_GB PO--CK 100 100 001 - 6178495566
|
||||
242 Total_Reads_GB PO--CK 100 100 001 - 7766077676
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 0 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1934 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1033 --- Power-on Hours
|
||||
0x01 0x018 6 6178495566 --- Logical Sectors Written
|
||||
0x01 0x020 6 52959477 --- Number of Write Commands
|
||||
0x01 0x028 6 7766077676 --- Logical Sectors Read
|
||||
0x01 0x030 6 65704134 --- Number of Read Commands
|
||||
0x01 0x038 6 1709775767894 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 41 --- Current Temperature
|
||||
0x05 0x010 1 35 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 52 --- Highest Temperature
|
||||
0x05 0x028 1 16 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 26 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 46580 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 4598 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
|
||||
|
||||
180
SSD/SK hynix/SC401/SC401 SATA 256GB/9CBBC59E6D4A
Normal file
180
SSD/SK hynix/SC401/SC401 SATA 256GB/9CBBC59E6D4A
Normal file
@@ -0,0 +1,180 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC401 SATA 256GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 90000122
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jan 13 02:25:26 2024 PST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count PO--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 085 085 000 - 13392
|
||||
12 Power_Cycle_Count PO--CK 100 100 020 - 1446
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 823350
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 9
|
||||
169 Max_Erase_Count -O--CK 098 098 000 - 73
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 17
|
||||
175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0
|
||||
177 Wear_Leveling_Count PO--CK 099 099 005 - 44
|
||||
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 8
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 8
|
||||
180 Erase_Fail_Count PO--CK 100 100 010 - 465
|
||||
181 Non4k_Aligned_Access PO--CK 100 100 010 - 0
|
||||
182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 5
|
||||
187 Reported_Uncorrect PO--CK 100 100 001 - 9
|
||||
188 Command_Timeout -O--CK 100 100 000 - 127
|
||||
194 Temperature_Celsius -O---K 031 046 000 - 31 (Min/Max 11/46)
|
||||
195 Hardware_ECC_Recovered PO-R-- 100 061 001 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 40
|
||||
199 UDMA_CRC_Error_Count PO--CK 100 100 001 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 4523
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 13379
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 22755900320
|
||||
238 Unknown_SK_hynix_Attrib PO---K 099 099 001 - 99
|
||||
241 Total_Writes_GB PO--CK 100 100 001 - 25091179917
|
||||
242 Total_Reads_GB PO--CK 100 100 001 - 25264325662
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 1 -
|
||||
|
||||
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1446 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 13392 --- Power-on Hours
|
||||
0x01 0x018 6 25091179917 --- Logical Sectors Written
|
||||
0x01 0x020 6 500342548 --- Number of Write Commands
|
||||
0x01 0x028 6 25264325662 --- Logical Sectors Read
|
||||
0x01 0x030 6 411558570 --- Number of Read Commands
|
||||
0x01 0x038 6 1524361093780 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 9 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 127 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 31 --- Current Temperature
|
||||
0x05 0x010 1 30 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 46 --- Highest Temperature
|
||||
0x05 0x028 1 11 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 261400 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 5317 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
180
SSD/SK hynix/SC401/SC401 SATA 256GB/EDF8D4750002
Normal file
180
SSD/SK hynix/SC401/SC401 SATA 256GB/EDF8D4750002
Normal file
@@ -0,0 +1,180 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SK hynix SC401 SATA 256GB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 ace42e ...
|
||||
Firmware Version: 90000122
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: M.2
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Dec 12 13:59:06 2023 GMT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x02) Offline data collection activity
|
||||
was completed without error.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 110) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count PO--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 077 077 000 - 21142
|
||||
12 Power_Cycle_Count PO--CK 100 100 020 - 274
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 3557616
|
||||
168 Min_Erase_Count -O--CK 095 095 000 - 157
|
||||
169 Max_Erase_Count -O--CK 093 093 000 - 224
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 68
|
||||
175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0
|
||||
177 Wear_Leveling_Count PO--CK 094 094 005 - 187
|
||||
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0
|
||||
180 Erase_Fail_Count PO--CK 100 100 010 - 473
|
||||
181 Non4k_Aligned_Access PO--CK 100 100 010 - 0
|
||||
182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect PO--CK 100 100 001 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 91
|
||||
194 Temperature_Celsius -O---K 032 043 000 - 32 (Min/Max 9/43)
|
||||
195 Hardware_ECC_Recovered PO-R-- 100 100 001 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count PO--CK 100 100 001 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 4790
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 12075
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 98331819136
|
||||
238 Unknown_SK_hynix_Attrib PO---K 094 094 001 - 94
|
||||
241 Total_Writes_GB PO--CK 100 100 001 - 68817494526
|
||||
242 Total_Reads_GB PO--CK 100 100 001 - 190208864840
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 21142 -
|
||||
# 2 Short offline Completed without error 00% 0 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 274 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 21142 --- Power-on Hours
|
||||
0x01 0x018 6 68817494526 --- Logical Sectors Written
|
||||
0x01 0x020 6 1671401842 --- Number of Write Commands
|
||||
0x01 0x028 6 190208864840 --- Logical Sectors Read
|
||||
0x01 0x030 6 5407645527 --- Number of Read Commands
|
||||
0x01 0x038 6 1701778860599 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 91 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 32 --- Current Temperature
|
||||
0x05 0x010 1 25 --- Average Short Term Temperature
|
||||
0x05 0x018 1 18 --- Average Long Term Temperature
|
||||
0x05 0x020 1 43 --- Highest Temperature
|
||||
0x05 0x028 1 9 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 10 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 15 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 1265060 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1287 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 6 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
177
SSD/SK hynix/SHGS31/SHGS31-250GS-2/9CDD820EF12B
Normal file
177
SSD/SK hynix/SHGS31/SHGS31-250GS-2/9CDD820EF12B
Normal file
@@ -0,0 +1,177 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SHGS31-250GS-2
|
||||
Serial Number: --
|
||||
Firmware Version: 90000Q00
|
||||
User Capacity: 250,059,350,016 bytes [250 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Apr 6 21:21:20 2024 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 40) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 164 006 - 0
|
||||
5 Retired_Block_Count -O--CK 100 100 036 - 1
|
||||
9 Power_On_Hours -O--CK 090 090 000 - 9392
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 836
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 314187
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 2
|
||||
169 Max_Erase_Count -O--CK 099 099 000 - 36
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 35
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 17
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 22
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 33
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 436
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 35
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 47
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 024 050 000 - 24 (Min/Max 15/50)
|
||||
195 Hardware_ECC_Recovered -OSR-- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 1
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 176
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 3914
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 8439
|
||||
233 Media_Wearout_Indicator PO---K 100 100 001 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 4437
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 5034
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 1197
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 836 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 9392 --- Power-on Hours
|
||||
0x01 0x018 6 9833291943 --- Logical Sectors Written
|
||||
0x01 0x020 6 156966794 --- Number of Write Commands
|
||||
0x01 0x028 6 2339367748 --- Logical Sectors Read
|
||||
0x01 0x030 6 35605001 --- Number of Read Commands
|
||||
0x01 0x038 6 1631448003450 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 47 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 24 --- Current Temperature
|
||||
0x05 0x010 1 23 --- Average Short Term Temperature
|
||||
0x05 0x018 1 27 --- Average Long Term Temperature
|
||||
0x05 0x020 1 50 --- Highest Temperature
|
||||
0x05 0x028 1 15 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 18 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 556000 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 3566 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
177
SSD/SK hynix/SHGS31/SHGS31-500GS-2/528101F0C1BB
Normal file
177
SSD/SK hynix/SHGS31/SHGS31-500GS-2/528101F0C1BB
Normal file
@@ -0,0 +1,177 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SHGS31-500GS-2
|
||||
Serial Number: --
|
||||
Firmware Version: 90000Q00
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Wed Oct 16 23:21:03 2024 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 1
|
||||
5 Retired_Block_Count -O--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 097 097 000 - 3276
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 669
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 153645
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 2
|
||||
169 Max_Erase_Count -O--CK 100 100 000 - 15
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 108
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 4
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 2
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 5
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 925
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 6
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 6
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 028 049 000 - 28 (Min/Max 21/49)
|
||||
195 Hardware_ECC_Recovered -OSR-- 100 100 000 - 7067450
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 24
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 523256
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 1565
|
||||
233 Media_Wearout_Indicator PO---K 100 100 001 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 2124
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 1985
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 648
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 669 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 3276 --- Power-on Hours
|
||||
0x01 0x018 6 3878335511 --- Logical Sectors Written
|
||||
0x01 0x020 6 55646334 --- Number of Write Commands
|
||||
0x01 0x028 6 1266327823 --- Logical Sectors Read
|
||||
0x01 0x030 6 5673423 --- Number of Read Commands
|
||||
0x01 0x038 6 1604261529590 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 6 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 28 --- Current Temperature
|
||||
0x05 0x010 1 25 --- Average Short Term Temperature
|
||||
0x05 0x018 1 25 --- Average Long Term Temperature
|
||||
0x05 0x020 1 49 --- Highest Temperature
|
||||
0x05 0x028 1 21 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 25 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 184920 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 807 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
177
SSD/SK hynix/SHGS31/SHGS31-500GS-2/906EA5FEE47A
Normal file
177
SSD/SK hynix/SHGS31/SHGS31-500GS-2/906EA5FEE47A
Normal file
@@ -0,0 +1,177 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SHGS31-500GS-2
|
||||
Serial Number: --
|
||||
Firmware Version: 90000Q00
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jun 10 11:43:24 2023 EDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 093 093 000 - 7005
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 1242
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 617195
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 1
|
||||
169 Max_Erase_Count -O--CK 098 098 000 - 64
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 44
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 17
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 900
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 1
|
||||
194 Temperature_Celsius -O---K 031 040 000 - 31 (Min/Max 19/40)
|
||||
195 Hardware_ECC_Recovered -OSR-- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 029 001 000 - 909
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 14884
|
||||
233 Media_Wearout_Indicator PO---K 100 100 001 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 8716
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 9321
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 3419
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 1242 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 7005 --- Power-on Hours
|
||||
0x01 0x018 6 18206252426 --- Logical Sectors Written
|
||||
0x01 0x020 6 345669240 --- Number of Write Commands
|
||||
0x01 0x028 6 6678959558 --- Logical Sectors Read
|
||||
0x01 0x030 6 101604957 --- Number of Read Commands
|
||||
0x01 0x038 6 1646117667815 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 31 --- Current Temperature
|
||||
0x05 0x010 1 29 --- Average Short Term Temperature
|
||||
0x05 0x018 1 - --- Average Long Term Temperature
|
||||
0x05 0x020 1 40 --- Highest Temperature
|
||||
0x05 0x028 1 19 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 26 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 413490 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 6248 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
177
SSD/SK hynix/SHGS31/SHGS31-500GS-2/FB6F2AC4E402
Normal file
177
SSD/SK hynix/SHGS31/SHGS31-500GS-2/FB6F2AC4E402
Normal file
@@ -0,0 +1,177 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: SK hynix SATA SSDs
|
||||
Device Model: SHGS31-500GS-2
|
||||
Serial Number: --
|
||||
Firmware Version: 90000Q00
|
||||
User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available, deterministic
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-3 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Jul 8 01:36:28 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Disabled
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 80) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 0
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -OSR-- 166 166 006 - 0
|
||||
5 Retired_Block_Count -O--CK 100 100 036 - 0
|
||||
9 Power_On_Hours -O--CK 092 092 000 - 7661
|
||||
12 Power_Cycle_Count -O--CK 100 100 020 - 177
|
||||
100 Total_Erase_Count -O--CK 100 100 000 - 239847
|
||||
168 Min_Erase_Count -O--CK 100 100 000 - 2
|
||||
169 Max_Erase_Count -O--CK 099 099 000 - 40
|
||||
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
||||
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
||||
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 89
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
||||
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 000 - 7
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
||||
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
||||
180 Erase_Fail_Count -O--CK 100 100 000 - 891
|
||||
184 End-to-End_Error -O--CK 100 100 000 - 0
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 100 000 - 0
|
||||
194 Temperature_Celsius -O---K 040 063 000 - 40 (Min/Max 25/63)
|
||||
195 Hardware_ECC_Recovered -OSR-- 100 100 000 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
||||
204 Soft_ECC_Correction -OSR-- 001 001 000 - 219731
|
||||
212 Phy_Error_Count -O--CK 100 100 000 - 2333
|
||||
233 Media_Wearout_Indicator PO---K 100 100 001 - 100
|
||||
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 3354
|
||||
241 Total_Writes_GB -O--CK 100 100 000 - 3279
|
||||
242 Total_Reads_GB -O--CK 100 100 000 - 338
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 SL R/O 1 Summary SMART error log
|
||||
0x02 SL R/O 4 Comprehensive SMART error log
|
||||
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 SL R/O 1 SMART self-test log
|
||||
0x07 GPL R/O 2 Extended self-test log
|
||||
0x09 SL R/W 1 Selective self-test log
|
||||
0x10 GPL R/O 1 NCQ Command Error log
|
||||
0x11 GPL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (2 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 177 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 7661 --- Power-on Hours
|
||||
0x01 0x018 6 6404328745 --- Logical Sectors Written
|
||||
0x01 0x020 6 202382209 --- Number of Write Commands
|
||||
0x01 0x028 6 660183991 --- Logical Sectors Read
|
||||
0x01 0x030 6 17330206 --- Number of Read Commands
|
||||
0x01 0x038 6 1687377949274 --- Date and Time TimeStamp
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 40 --- Current Temperature
|
||||
0x05 0x010 1 38 --- Average Short Term Temperature
|
||||
0x05 0x018 1 36 --- Average Long Term Temperature
|
||||
0x05 0x020 1 63 --- Highest Temperature
|
||||
0x05 0x028 1 25 --- Lowest Temperature
|
||||
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 30 --- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 33 --- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 0 --- Time in Over-Temperature
|
||||
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 455830 --- Time in Under-Temperature
|
||||
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 1885 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 2 0 Command failed due to ICRC error
|
||||
0x000a 2 279 Device-to-host register FISes sent due to a COMRESET
|
||||
|
||||
Reference in New Issue
Block a user