mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 6895, modified: 16)
This commit is contained in:
Andrey Ponomarenko
107
SSD/Transcend/TSITHSD512/TSITHSD512-004G/999DF3D13D99
Normal file
107
SSD/Transcend/TSITHSD512/TSITHSD512-004G/999DF3D13D99
Normal file
@@ -0,0 +1,107 @@
|
||||
smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: TSITHSD512-004G
|
||||
Serial Number: --
|
||||
Firmware Version: O1225G
|
||||
User Capacity: 4,011,614,208 bytes [4.01 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
TRIM Command: Available, deterministic, zeroed
|
||||
Device is: Not in smartctl database 7.3/5528
|
||||
ATA Version is: ACS-2 (minor revision not indicated)
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Mon Dec 30 10:04:58 2024 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART Status not supported: Incomplete response, ATA output registers missing
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
Warning: This result is based on an Attribute check.
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 0) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x71) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
Conveyance self-test routine
|
||||
recommended polling time: ( 1) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
||||
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
|
||||
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 135
|
||||
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 710
|
||||
160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
||||
161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1116
|
||||
163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 8
|
||||
164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 47765
|
||||
165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 75
|
||||
166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1
|
||||
167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 22
|
||||
168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 30000
|
||||
169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100
|
||||
175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
|
||||
178 Used_Rsvd_Blk_Cnt_Chip 0x0000 100 100 000 Old_age Offline - 0
|
||||
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
||||
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 16
|
||||
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 28
|
||||
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
|
||||
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
|
||||
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
|
||||
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
|
||||
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
||||
241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 2643
|
||||
242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 1156
|
||||
245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 5970
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 1
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
6 0 65535 Read_scanning was never started
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
The above only provides legacy SMART information - try 'smartctl -x' for more
|
||||
|
||||
Reference in New Issue
Block a user