mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 0, modified: 538)
This commit is contained in:
@@ -1,5 +1,5 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
|
||||
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Toshiba 2.5" HDD MQ01ABD...
|
||||
@@ -11,10 +11,10 @@ User Capacity: 500,107,862,016 bytes [500 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
Device is: In smartctl database 7.3/5528
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Sun Aug 6 13:39:24 2023 EDT
|
||||
Local Time is: Wed Feb 28 00:04:37 2024 EST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -64,29 +64,29 @@ SCT capabilities: (0x003d) SCT Status supported.
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
|
||||
1 Raw_Read_Error_Rate POSR-K 078 078 050 - 0
|
||||
2 Throughput_Performance POS--K 100 100 050 - 0
|
||||
3 Spin_Up_Time PO---K 100 100 002 - 1074
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 6336
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
||||
3 Spin_Up_Time PO---K 100 100 002 - 1045
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 6408
|
||||
5 Reallocated_Sector_Ct PO--CK 098 098 010 - 352
|
||||
7 Seek_Error_Rate POSR-K 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--K 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 078 078 000 - 9069
|
||||
10 Spin_Retry_Count PO--CK 226 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 6303
|
||||
9 Power_On_Hours -O--CK 066 066 000 - 13931
|
||||
10 Spin_Retry_Count PO--CK 227 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 6375
|
||||
183 Runtime_Bad_Block -O--CK 100 100 001 - 0
|
||||
184 End-to-End_Error PO--CK 100 100 097 - 0
|
||||
185 Unknown_Attribute -O--CK 100 100 001 - 65535
|
||||
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
||||
188 Command_Timeout -O--CK 100 098 000 - 256
|
||||
187 Reported_Uncorrect -O--CK 070 070 000 - 30
|
||||
188 Command_Timeout -O--CK 100 098 000 - 258
|
||||
189 High_Fly_Writes -O-RCK 100 100 001 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 066 036 040 Past 34 (0 117 36 27 0)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 168
|
||||
192 Power-Off_Retract_Count -O---K 100 100 000 - 4915275
|
||||
193 Load_Cycle_Count -O--CK 084 084 000 - 168871
|
||||
194 Temperature_Celsius -O---K 066 036 040 Past 34 (0 117 36 27 0)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
190 Airflow_Temperature_Cel -O---K 079 036 040 Past 21 (0 117 24 18 0)
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 175
|
||||
192 Power-Off_Retract_Count -O---K 100 100 000 - 6094941
|
||||
193 Load_Cycle_Count -O--CK 021 021 000 - 793991
|
||||
194 Temperature_Celsius -O---K 079 036 040 Past 21 (0 117 24 18 0)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 42
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 5488
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
@@ -113,7 +113,7 @@ Address Access R/W Size Description
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
||||
Device Error Count: 1
|
||||
Device Error Count: 31
|
||||
CR = Command Register
|
||||
FEATR = Features Register
|
||||
COUNT = Count (was: Sector Count) Register
|
||||
@@ -129,22 +129,141 @@ Powered_Up_Time is measured from power on, and printed as
|
||||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||||
|
||||
Error 1 [0] occurred at disk power-on lifetime: 3640 hours (151 days + 16 hours)
|
||||
Error 31 [30] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
04 -- 31 00 00 00 00 00 74 3a 90 40 00
|
||||
40 -- 41 00 00 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
ea 00 00 00 00 00 00 00 00 00 00 40 00 00:52:00.787 FLUSH CACHE EXT
|
||||
61 00 08 00 00 00 00 00 74 3a 90 40 00 00:52:00.697 WRITE FPDMA QUEUED
|
||||
60 00 40 00 f8 00 00 00 7f 24 1a 40 00 00:52:00.676 READ FPDMA QUEUED
|
||||
61 00 18 00 f0 00 00 00 74 99 40 40 00 00:52:00.676 WRITE FPDMA QUEUED
|
||||
60 01 00 00 e8 00 00 03 60 72 60 40 00 00:52:00.343 READ FPDMA QUEUED
|
||||
60 00 08 00 00 00 00 00 00 0a 30 40 00 08:28:05.210 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:28:05.210 READ LOG EXT
|
||||
60 00 08 00 f0 00 00 00 00 0a 30 40 00 08:28:01.443 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:28:01.443 READ LOG EXT
|
||||
60 00 08 00 e0 00 00 00 00 0a 30 40 00 08:27:57.688 READ FPDMA QUEUED
|
||||
|
||||
Error 30 [29] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 f0 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 f0 00 00 00 00 0a 30 40 00 08:28:01.443 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:28:01.443 READ LOG EXT
|
||||
60 00 08 00 e0 00 00 00 00 0a 30 40 00 08:27:57.688 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:57.687 READ LOG EXT
|
||||
60 00 08 00 d0 00 00 00 00 0a 30 40 00 08:27:53.943 READ FPDMA QUEUED
|
||||
|
||||
Error 29 [28] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 e0 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 e0 00 00 00 00 0a 30 40 00 08:27:57.688 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:57.687 READ LOG EXT
|
||||
60 00 08 00 d0 00 00 00 00 0a 30 40 00 08:27:53.943 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:53.942 READ LOG EXT
|
||||
60 00 08 00 c0 00 00 00 00 0a 30 40 00 08:27:50.168 READ FPDMA QUEUED
|
||||
|
||||
Error 28 [27] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 d0 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 d0 00 00 00 00 0a 30 40 00 08:27:53.943 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:53.942 READ LOG EXT
|
||||
60 00 08 00 c0 00 00 00 00 0a 30 40 00 08:27:50.168 READ FPDMA QUEUED
|
||||
60 00 08 00 b8 00 00 00 00 0a 28 40 00 08:27:50.168 READ FPDMA QUEUED
|
||||
60 00 08 00 b0 00 00 00 00 0a 20 40 00 08:27:50.167 READ FPDMA QUEUED
|
||||
|
||||
Error 27 [26] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 c0 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 c0 00 00 00 00 0a 30 40 00 08:27:50.168 READ FPDMA QUEUED
|
||||
60 00 08 00 b8 00 00 00 00 0a 28 40 00 08:27:50.168 READ FPDMA QUEUED
|
||||
60 00 08 00 b0 00 00 00 00 0a 20 40 00 08:27:50.167 READ FPDMA QUEUED
|
||||
60 00 08 00 a8 00 00 00 00 0a 18 40 00 08:27:50.167 READ FPDMA QUEUED
|
||||
60 00 08 00 a0 00 00 00 00 0a 10 40 00 08:27:50.167 READ FPDMA QUEUED
|
||||
|
||||
Error 26 [25] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 48 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 48 00 00 00 00 0a 30 40 00 08:27:26.630 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:26.629 READ LOG EXT
|
||||
60 00 08 00 38 00 00 00 00 0a 30 40 00 08:27:22.874 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:22.873 READ LOG EXT
|
||||
60 00 08 00 28 00 00 00 00 0a 30 40 00 08:27:19.118 READ FPDMA QUEUED
|
||||
|
||||
Error 25 [24] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 38 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 38 00 00 00 00 0a 30 40 00 08:27:22.874 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:22.873 READ LOG EXT
|
||||
60 00 08 00 28 00 00 00 00 0a 30 40 00 08:27:19.118 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:19.118 READ LOG EXT
|
||||
60 00 08 00 18 00 00 00 00 0a 30 40 00 08:27:15.352 READ FPDMA QUEUED
|
||||
|
||||
Error 24 [23] occurred at disk power-on lifetime: 13787 hours (574 days + 11 hours)
|
||||
When the command that caused the error occurred, the device was active or idle.
|
||||
|
||||
After command completion occurred, registers were:
|
||||
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
||||
-- -- -- == -- == == == -- -- -- -- --
|
||||
40 -- 41 00 28 00 00 00 00 0a 30 40 00 Error: UNC at LBA = 0x00000a30 = 2608
|
||||
|
||||
Commands leading to the command that caused the error were:
|
||||
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
||||
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
||||
60 00 08 00 28 00 00 00 00 0a 30 40 00 08:27:19.118 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:19.118 READ LOG EXT
|
||||
60 00 08 00 18 00 00 00 00 0a 30 40 00 08:27:15.352 READ FPDMA QUEUED
|
||||
2f 00 00 00 01 00 00 00 00 00 10 00 00 08:27:15.351 READ LOG EXT
|
||||
60 00 08 00 08 00 00 00 00 0a 30 40 00 08:27:11.621 READ FPDMA QUEUED
|
||||
|
||||
SMART Extended Self-test Log Version: 1 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
@@ -163,8 +282,8 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 34 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/36 Celsius
|
||||
Current Temperature: 21 Celsius
|
||||
Power Cycle Min/Max Temperature: 18/24 Celsius
|
||||
Lifetime Min/Max Temperature: 4/64 Celsius
|
||||
Under/Over Temperature Limit Count: 0/117
|
||||
|
||||
@@ -173,7 +292,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 0/60 Celsius
|
||||
Min/Max Temperature Limit: 0/60 Celsius
|
||||
Temperature History Size (Index): 478 (44)
|
||||
Temperature History Size (Index): 478 (326)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
@@ -182,43 +301,43 @@ SCT Error Recovery Control:
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 6303 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 9069 --- Power-on Hours
|
||||
0x01 0x018 6 44183293995 --- Logical Sectors Written
|
||||
0x01 0x020 6 487215493 --- Number of Write Commands
|
||||
0x01 0x028 6 15885680581 --- Logical Sectors Read
|
||||
0x01 0x030 6 299903559 --- Number of Read Commands
|
||||
0x01 0x008 4 6375 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 13931 --- Power-on Hours
|
||||
0x01 0x018 6 48099205841 --- Logical Sectors Written
|
||||
0x01 0x020 6 538045825 --- Number of Write Commands
|
||||
0x01 0x028 6 15992669167 --- Logical Sectors Read
|
||||
0x01 0x030 6 303224235 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 168 --- Overlimit Shock Events
|
||||
0x02 0x010 4 175 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 9055 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 7366 --- Head Flying Hours
|
||||
0x03 0x018 4 168871 --- Head Load Events
|
||||
0x03 0x020 4 8 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x008 4 13917 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 11062 --- Head Flying Hours
|
||||
0x03 0x018 4 793991 --- Head Load Events
|
||||
0x03 0x020 4 752 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 1 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 256 --- Resets Between Cmd Acceptance and Completion
|
||||
0x04 0x008 4 30 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 258 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 34 --- Current Temperature
|
||||
0x05 0x010 1 29 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 32 N-- Average Long Term Temperature
|
||||
0x05 0x008 1 21 --- Current Temperature
|
||||
0x05 0x010 1 18 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 19 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 64 --- Highest Temperature
|
||||
0x05 0x028 1 4 --- Lowest Temperature
|
||||
0x05 0x030 1 50 N-- Highest Average Short Term Temperature
|
||||
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x038 1 16 N-- Lowest Average Short Term Temperature
|
||||
0x05 0x040 1 44 N-- Highest Average Long Term Temperature
|
||||
0x05 0x048 1 28 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x048 1 19 N-- Lowest Average Long Term Temperature
|
||||
0x05 0x050 4 180 --- Time in Over-Temperature
|
||||
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 2569 --- Number of Hardware Resets
|
||||
0x06 0x008 4 2999 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 15 N-- Percentage Used Endurance Indicator
|
||||
0x07 0x008 1 23 N-- Percentage Used Endurance Indicator
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
@@ -235,8 +354,8 @@ ID Size Value Description
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 32 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 32 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0009 4 13 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
|
@@ -1,4 +1,4 @@
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 14.0-CURRENT amd64] (local build)
|
||||
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE amd64] (local build)
|
||||
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
@@ -14,7 +14,7 @@ Form Factor: 2.5 inches
|
||||
Device is: In smartctl database [for details use: -P show]
|
||||
ATA Version is: ATA8-ACS (minor revision not indicated)
|
||||
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Fri Aug 27 07:29:28 2021 BST
|
||||
Local Time is: Sun Sep 12 15:41:21 2021 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
@@ -65,27 +65,27 @@ Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
||||
2 Throughput_Performance P-S--- 100 100 050 - 0
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 1361
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 3711
|
||||
3 Spin_Up_Time POS--K 100 100 001 - 1384
|
||||
4 Start_Stop_Count -O--CK 100 100 000 - 3890
|
||||
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
|
||||
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
||||
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 085 085 000 - 6164
|
||||
10 Spin_Retry_Count PO--CK 173 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 703
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 241
|
||||
193 Load_Cycle_Count -O--CK 090 090 000 - 107755
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 43 (Min/Max 12/50)
|
||||
9 Power_On_Hours -O--CK 084 084 000 - 6405
|
||||
10 Spin_Retry_Count PO--CK 177 100 030 - 0
|
||||
12 Power_Cycle_Count -O--CK 100 100 000 - 719
|
||||
191 G-Sense_Error_Rate -O--CK 100 100 000 - 46
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 000 - 248
|
||||
193 Load_Cycle_Count -O--CK 089 089 000 - 111981
|
||||
194 Temperature_Celsius -O---K 100 100 000 - 33 (Min/Max 12/50)
|
||||
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
||||
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
||||
220 Disk_Shift -O---- 100 100 000 - 0
|
||||
222 Loaded_Hours -O--CK 095 095 000 - 2000
|
||||
222 Loaded_Hours -O--CK 095 095 000 - 2080
|
||||
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
||||
224 Load_Friction -O---K 100 100 000 - 0
|
||||
226 Load-in_Time -OS--K 100 100 000 - 248
|
||||
226 Load-in_Time -OS--K 100 100 000 - 258
|
||||
240 Head_Flying_Hours P----- 100 100 001 - 0
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
@@ -145,8 +145,8 @@ If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
SCT Status Version: 2
|
||||
SCT Version (vendor specific): 1 (0x0001)
|
||||
Device State: Active (0)
|
||||
Current Temperature: 43 Celsius
|
||||
Power Cycle Min/Max Temperature: 27/44 Celsius
|
||||
Current Temperature: 33 Celsius
|
||||
Power Cycle Min/Max Temperature: 31/41 Celsius
|
||||
Lifetime Min/Max Temperature: 12/50 Celsius
|
||||
Under/Over Temperature Limit Count: 0/0
|
||||
|
||||
@@ -155,7 +155,7 @@ Temperature Sampling Period: 1 minute
|
||||
Temperature Logging Interval: 1 minute
|
||||
Min/Max recommended Temperature: 5/55 Celsius
|
||||
Min/Max Temperature Limit: 5/55 Celsius
|
||||
Temperature History Size (Index): 478 (177)
|
||||
Temperature History Size (Index): 478 (246)
|
||||
|
||||
SCT Error Recovery Control:
|
||||
Read: Disabled
|
||||
@@ -164,27 +164,27 @@ SCT Error Recovery Control:
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 2) ==
|
||||
0x01 0x008 4 703 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6164 --- Power-on Hours
|
||||
0x01 0x018 6 15454449216 --- Logical Sectors Written
|
||||
0x01 0x020 6 166238365 --- Number of Write Commands
|
||||
0x01 0x028 6 42338555748 --- Logical Sectors Read
|
||||
0x01 0x030 6 307862609 --- Number of Read Commands
|
||||
0x01 0x008 4 719 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 6405 --- Power-on Hours
|
||||
0x01 0x018 6 16156339126 --- Logical Sectors Written
|
||||
0x01 0x020 6 172700476 --- Number of Write Commands
|
||||
0x01 0x028 6 44670305769 --- Logical Sectors Read
|
||||
0x01 0x030 6 322700036 --- Number of Read Commands
|
||||
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
||||
0x02 0x010 4 1 --- Overlimit Shock Events
|
||||
0x02 0x010 4 46 --- Overlimit Shock Events
|
||||
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
||||
0x03 0x008 4 6060 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 2000 --- Head Flying Hours
|
||||
0x03 0x018 4 107755 --- Head Load Events
|
||||
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x008 4 6297 --- Spindle Motor Power-on Hours
|
||||
0x03 0x010 4 2080 --- Head Flying Hours
|
||||
0x03 0x018 4 111981 --- Head Load Events
|
||||
0x03 0x020 4 8 --- Number of Reallocated Logical Sectors
|
||||
0x03 0x028 4 0 --- Read Recovery Attempts
|
||||
0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
||||
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
||||
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
||||
0x04 0x010 4 142 --- Resets Between Cmd Acceptance and Completion
|
||||
0x04 0x010 4 150 --- Resets Between Cmd Acceptance and Completion
|
||||
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
||||
0x05 0x008 1 43 --- Current Temperature
|
||||
0x05 0x010 1 37 N-- Average Short Term Temperature
|
||||
0x05 0x008 1 33 --- Current Temperature
|
||||
0x05 0x010 1 35 N-- Average Short Term Temperature
|
||||
0x05 0x018 1 34 N-- Average Long Term Temperature
|
||||
0x05 0x020 1 50 --- Highest Temperature
|
||||
0x05 0x028 1 12 --- Lowest Temperature
|
||||
@@ -197,7 +197,7 @@ Page Offset Size Value Flags Description
|
||||
0x05 0x060 4 0 --- Time in Under-Temperature
|
||||
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
||||
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
||||
0x06 0x008 4 163 --- Number of Hardware Resets
|
||||
0x06 0x008 4 171 --- Number of Hardware Resets
|
||||
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
||||
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
||||
0x07 0x008 1 10 N-- Percentage Used Endurance Indicator
|
||||
@@ -217,8 +217,8 @@ ID Size Value Description
|
||||
0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
||||
0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
||||
0x0008 4 0 Device-to-host non-data FIS retries
|
||||
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
|
||||
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
||||
@@ -226,5 +226,3 @@ ID Size Value Description
|
||||
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
||||
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
||||
|
||||
|
||||
|
||||
|
Reference in New Issue
Block a user